WeldCut2Builder Class¶
-
class
NXOpen.Features.ShipDesign.WeldCut2Builder¶ Bases:
NXOpen.Features.FeatureBuilderRepresents a
NXOpen.Features.ShipDesign.WeldCut2builderTo create a new instance of this class, use
NXOpen.Features.ShipCollection.CreateWeldCut2Builder()Default values.
Property Value DistanceTolerance 0.0254 (millimeters part), 0.001 (inches part) New in version NX8.0.1.
Properties¶
| Property | Description |
|---|---|
| CSYSTargetFace | Returns the csys target face. |
| CoordinateSystem | Returns or sets the placement CSYS of the weld cut The coordinate system is only used for the SpecifyCSYS placement method. |
| CornerPoint | Returns or sets the corner point as weld location. |
| CornerTargetFace | Returns the corner target face. |
| CurveTargetFace | Returns the curve target face. |
| DistanceTolerance | Returns or sets the distance tolerance. |
| GuideCurve | Returns the guide curve to position the weld cut. |
| ParentFeatureInternal | Returns or sets whether or not the latest timestamped parent feature of this feature should be made internal |
| PatchSolutionFlag | Returns or sets the patch solution flag |
| PatchSurfaceFilename | Returns or sets the patch surface filename |
| PlacementType | Returns or sets the method used to define the placement of the weld cut |
| Spreadsheet | Returns the spreadsheet builder. |
| SurroundingPatchSurfaceFilename | Returns or sets the surrounding patch surface filename |
| Tag | Returns the Tag for this object. |
Methods¶
| Method | Description |
|---|---|
| Commit | Commits any edits that have been applied to the builder. |
| CommitFeature | Commits the feature parameters and creates the feature |
| Destroy | Deletes the builder, and cleans up any objects created by the builder. |
| GetCommittedObjects | For builders that create more than one object, this method returns the objects that are created by commit. |
| GetFeature | Returns the feature currently being edited by this builder. |
| GetObject | Returns the object currently being edited by this builder. |
| HideInternalParentFeatureAfterEdit | Re-suppress an internal parent feature (a slave feature) after it has been edited. |
| SetParentFeatureInternal | Set the parent features which would be internal or slaves to the feature being created or commited |
| ShowInternalParentFeatureForEdit | Unsuppress an internal parent feature (a slave feature) so it can be edited. |
| ShowResults | Updates the model to reflect the result of an edit to the model for all builders that support showing results. |
| UnsetParentFeatureInternal | Set the internal parent feature of the feature being edited to external |
| Validate | Validate whether the inputs to the component are sufficient for commit to be called. |
Enumerations¶
| WeldCut2BuilderCreationMethod Enumeration | Creation method used to define the placement of the weld cut |
Property Detail¶
CSYSTargetFace¶
-
WeldCut2Builder.CSYSTargetFace¶ Returns the csys target face.
This csys target face is only used for the SpecifyCSYS placement method.
-------------------------------------Getter Method
Signature
CSYSTargetFaceReturns: Return type: NXOpen.SelectFaceNew in version NX8.0.1.
License requirements: None.
CoordinateSystem¶
-
WeldCut2Builder.CoordinateSystem¶ Returns or sets the placement CSYS of the weld cut The coordinate system is only used for the SpecifyCSYS placement method.
-------------------------------------Getter Method
Signature
CoordinateSystemReturns: Return type: NXOpen.CoordinateSystemNew in version NX8.0.1.
License requirements: None.
-------------------------------------Setter Method
Signature
CoordinateSystemParameters: coordinateSystem ( NXOpen.CoordinateSystem) –New in version NX8.0.1.
License requirements: nx_ship_detail (“Ship Detail Design”)
CornerPoint¶
-
WeldCut2Builder.CornerPoint¶ Returns or sets the corner point as weld location.
The weld location is only used for the Corner placement method.
-------------------------------------Getter Method
Signature
CornerPointReturns: Return type: NXOpen.PointNew in version NX8.0.1.
License requirements: None.
-------------------------------------Setter Method
Signature
CornerPointParameters: weldLocation ( NXOpen.Point) –New in version NX8.0.1.
License requirements: nx_ship_detail (“Ship Detail Design”)
CornerTargetFace¶
-
WeldCut2Builder.CornerTargetFace¶ Returns the corner target face.
This corner target face is only used for the Corner placement method.
-------------------------------------Getter Method
Signature
CornerTargetFaceReturns: Return type: NXOpen.SelectFaceNew in version NX8.0.1.
License requirements: None.
CurveTargetFace¶
-
WeldCut2Builder.CurveTargetFace¶ Returns the curve target face.
This curve target face is only used for the AlongGuide placement method.
-------------------------------------Getter Method
Signature
CurveTargetFaceReturns: Return type: NXOpen.SelectFaceNew in version NX8.0.1.
License requirements: None.
DistanceTolerance¶
-
WeldCut2Builder.DistanceTolerance¶ Returns or sets the distance tolerance.
-------------------------------------Getter Method
Signature
DistanceToleranceReturns: Return type: float New in version NX8.0.1.
License requirements: None.
-------------------------------------Setter Method
Signature
DistanceToleranceParameters: distanceTolerance (float) – New in version NX8.0.1.
License requirements: nx_ship_detail (“Ship Detail Design”)
GuideCurve¶
-
WeldCut2Builder.GuideCurve¶ Returns the guide curve to position the weld cut.
The select guide curve is only used for the AlongGuide placement method.
-------------------------------------Getter Method
Signature
GuideCurveReturns: Return type: NXOpen.SelectTaggedObjectNew in version NX8.0.1.
License requirements: None.
PlacementType¶
-
WeldCut2Builder.PlacementType¶ Returns or sets the method used to define the placement of the weld cut
-------------------------------------Getter Method
Signature
PlacementTypeReturns: Return type: NXOpen.Features.ShipDesign.WeldCut2BuilderCreationMethodNew in version NX8.0.1.
License requirements: None.
-------------------------------------Setter Method
Signature
PlacementTypeParameters: placementType ( NXOpen.Features.ShipDesign.WeldCut2BuilderCreationMethod) –New in version NX8.0.1.
License requirements: nx_ship_detail (“Ship Detail Design”)
Spreadsheet¶
-
WeldCut2Builder.Spreadsheet¶ Returns the spreadsheet builder.
Users can specify the Weldout using a single sketch. The sketch type and its parameters are controlled by the
NXOpen.Features.ShipDesign.SteelFeatureSpreadsheetBuilder.-------------------------------------Getter Method
Signature
SpreadsheetReturns: Return type: NXOpen.Features.ShipDesign.SteelFeatureSpreadsheetBuilderNew in version NX8.0.1.
License requirements: None.
Method Detail¶
Validate¶
-
WeldCut2Builder.Validate¶ Validate whether the inputs to the component are sufficient for commit to be called.
If the component is not in a state to commit then an exception is thrown. For example, if the component requires you to set some property, this method will throw an exception if you haven’t set it. This method throws a not-yet-implemented NXException for some components.
Signature
Validate()Returns: Was self validation successful Return type: bool New in version NX3.0.1.
License requirements: None.