Cutout2Builder Class

class NXOpen.Features.ShipDesign.Cutout2Builder

Bases: NXOpen.Features.FeatureBuilder

Represents a NXOpen.Features.ShipDesign.Cutout2 builder

To create a new instance of this class, use NXOpen.Features.ShipCollection.CreateCutout2Builder()

Default values.

Property Value
AngularDimension.Value 0
PlacementType Face2Lines
ReferenceOffset1.Value 0 (millimeters part), 0 (inches part)
ReferenceOffset2.Value 0 (millimeters part), 0 (inches part)
ReferenceOffset3.Value 0 (millimeters part), 0 (inches part)

New in version NX8.0.0.

Properties

Property Description
AngularDimension Returns the angular dimension (used only for Face2Lines, Faces2Surfaces, FacesBetweenSurfacesSurface, FacesCentered)
CoordSystem Returns or sets the coord system (only used for: SpecifyCSYS)
CustomShape Returns the section of curves defining the custom shape cut
HorizontalReference Returns or sets the horizontal reference (optional, used only for Faces2Surfaces, FacesBetweenSurfacesSurface, and FacesCentered)
LinearOffset1 Returns the linear offset1 (replaced by ReferenceOffset1 in NX8.
LinearOffset2 Returns the linear offset2 (replaced by ReferenceOffset2 in NX8.
ManufacturingInformation Returns the manufacturing stock builder that holds the manufacturing data.
ParentFeatureInternal Returns or sets whether or not the latest timestamped parent feature of this feature should be made internal
PatchSolutionFlag Returns or sets the patch solution flag
PatchSurfaceFilename Returns or sets the patch surface filename
PlacementType Returns or sets the placement type
ProjectionDirection Returns the direction used to project the custom shape curves
ReferenceOffset1 Returns the reference offset1 (used only for Face2Lines, and Faces2Surfaces )
ReferenceOffset2 Returns the reference offset2 (used only for Face2Lines, and Faces2Surfaces)
ReferenceOffset3 Returns the reference offset3 (used only for FacesBetweenSurfacesSurface)
ReverseDirection1 Returns or sets the reverse direction1 (used only for Face2Lines, and Faces2Surfaces )
ReverseDirection2 Returns or sets the reverse direction2 (used only for Face2Lines, and Faces2Surfaces)
ReverseDirection3 Returns or sets the reverse direction3 (used only for FacesBetweenSurfacesSurface)
SelectCSYSFace Returns the select csysface (only used for: SpecifyCSYS)
SelectLine1 Returns the select line1 (replaced by SelectReference1 in NX8.
SelectLine2 Returns the select line2 (replaced by SelectReference2 in NX8.
SelectReference1 Returns the reference1 (used only for Face2Lines, Faces2Surfaces, and FacesBetweenSurfacesSurface)
SelectReference2 Returns the reference2 (used only for Face2Lines, Faces2Surfaces, and FacesBetweenSurfacesSurface)
SelectReference3 Returns the reference3 (used only for FacesBetweenSurfacesSurface)
SelectTargetFace Returns the select target face
SelectTargetFaces Returns the target faces (used only for: Faces2Surfaces, FacesBetweenSurfacesSurface, and FacesCentered)
SketchBlock Returns the sketch block.
SurroundingPatchSurfaceFilename Returns or sets the surrounding patch surface filename
Tag Returns the Tag for this object.

Methods

Method Description
Commit Commits any edits that have been applied to the builder.
CommitFeature Commits the feature parameters and creates the feature
Destroy Deletes the builder, and cleans up any objects created by the builder.
GetCommittedObjects For builders that create more than one object, this method returns the objects that are created by commit.
GetFeature Returns the feature currently being edited by this builder.
GetObject Returns the object currently being edited by this builder.
HideInternalParentFeatureAfterEdit Re-suppress an internal parent feature (a slave feature) after it has been edited.
SetParentFeatureInternal Set the parent features which would be internal or slaves to the feature being created or commited
ShowInternalParentFeatureForEdit Unsuppress an internal parent feature (a slave feature) so it can be edited.
ShowResults Updates the model to reflect the result of an edit to the model for all builders that support showing results.
UnsetParentFeatureInternal Set the internal parent feature of the feature being edited to external
Validate Validate whether the inputs to the component are sufficient for commit to be called.

Enumerations

Cutout2BuilderCreationMethod Enumeration available methods used to place a cutout object

Property Detail

AngularDimension

Cutout2Builder.AngularDimension

Returns the angular dimension (used only for Face2Lines, Faces2Surfaces, FacesBetweenSurfacesSurface, FacesCentered)

-------------------------------------

Getter Method

Signature AngularDimension

Returns:
Return type:NXOpen.Expression

New in version NX8.0.0.

License requirements: None.

CoordSystem

Cutout2Builder.CoordSystem

Returns or sets the coord system (only used for: SpecifyCSYS)

-------------------------------------

Getter Method

Signature CoordSystem

Returns:
Return type:NXOpen.CoordinateSystem

New in version NX8.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature CoordSystem

Parameters:coordSystem (NXOpen.CoordinateSystem) –

New in version NX8.0.0.

License requirements: nx_ship_detail (“Ship Detail Design”)

CustomShape

Cutout2Builder.CustomShape

Returns the section of curves defining the custom shape cut

-------------------------------------

Getter Method

Signature CustomShape

Returns:
Return type:NXOpen.Section

New in version NX12.0.0.

License requirements: None.

HorizontalReference

Cutout2Builder.HorizontalReference

Returns or sets the horizontal reference (optional, used only for Faces2Surfaces, FacesBetweenSurfacesSurface, and FacesCentered)

-------------------------------------

Getter Method

Signature HorizontalReference

Returns:
Return type:NXOpen.Direction

New in version NX8.5.0.

License requirements: None.

-------------------------------------

Setter Method

Signature HorizontalReference

Parameters:horizontalReference (NXOpen.Direction) –

New in version NX8.5.0.

License requirements: nx_ship_detail (“Ship Detail Design”)

LinearOffset1

Cutout2Builder.LinearOffset1

Returns the linear offset1 (replaced by ReferenceOffset1 in NX8.

-------------------------------------

Getter Method

Signature LinearOffset1

Returns:
Return type:NXOpen.Expression

New in version NX8.0.0.

License requirements: None.

LinearOffset2

Cutout2Builder.LinearOffset2

Returns the linear offset2 (replaced by ReferenceOffset2 in NX8.

-------------------------------------

Getter Method

Signature LinearOffset2

Returns:
Return type:NXOpen.Expression

New in version NX8.0.0.

License requirements: None.

ManufacturingInformation

Cutout2Builder.ManufacturingInformation

Returns the manufacturing stock builder that holds the manufacturing data.

-------------------------------------

Getter Method

Signature ManufacturingInformation

Returns:
Return type:NXOpen.Features.ShipDesign.ManufacturingStockBuilder

New in version NX8.5.1.

License requirements: None.

PlacementType

Cutout2Builder.PlacementType

Returns or sets the placement type

-------------------------------------

Getter Method

Signature PlacementType

Returns:
Return type:NXOpen.Features.ShipDesign.Cutout2BuilderCreationMethod

New in version NX8.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature PlacementType

Parameters:placementType (NXOpen.Features.ShipDesign.Cutout2BuilderCreationMethod) –

New in version NX8.0.0.

License requirements: nx_ship_detail (“Ship Detail Design”)

ProjectionDirection

Cutout2Builder.ProjectionDirection

Returns the direction used to project the custom shape curves

-------------------------------------

Getter Method

Signature ProjectionDirection

Returns:
Return type:NXOpen.GeometricUtilities.ProjectionOptions

New in version NX12.0.0.

License requirements: None.

ReferenceOffset1

Cutout2Builder.ReferenceOffset1

Returns the reference offset1 (used only for Face2Lines, and Faces2Surfaces )

-------------------------------------

Getter Method

Signature ReferenceOffset1

Returns:
Return type:NXOpen.Expression

New in version NX8.0.0.

License requirements: None.

ReferenceOffset2

Cutout2Builder.ReferenceOffset2

Returns the reference offset2 (used only for Face2Lines, and Faces2Surfaces)

-------------------------------------

Getter Method

Signature ReferenceOffset2

Returns:
Return type:NXOpen.Expression

New in version NX8.0.0.

License requirements: None.

ReferenceOffset3

Cutout2Builder.ReferenceOffset3

Returns the reference offset3 (used only for FacesBetweenSurfacesSurface)

-------------------------------------

Getter Method

Signature ReferenceOffset3

Returns:
Return type:NXOpen.Expression

New in version NX8.5.0.

License requirements: None.

ReverseDirection1

Cutout2Builder.ReverseDirection1

Returns or sets the reverse direction1 (used only for Face2Lines, and Faces2Surfaces )

-------------------------------------

Getter Method

Signature ReverseDirection1

Returns:
Return type:bool

New in version NX8.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature ReverseDirection1

Parameters:reverseDirection1 (bool) –

New in version NX8.0.0.

License requirements: nx_ship_detail (“Ship Detail Design”)

ReverseDirection2

Cutout2Builder.ReverseDirection2

Returns or sets the reverse direction2 (used only for Face2Lines, and Faces2Surfaces)

-------------------------------------

Getter Method

Signature ReverseDirection2

Returns:
Return type:bool

New in version NX8.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature ReverseDirection2

Parameters:reverseDirection2 (bool) –

New in version NX8.0.0.

License requirements: nx_ship_detail (“Ship Detail Design”)

ReverseDirection3

Cutout2Builder.ReverseDirection3

Returns or sets the reverse direction3 (used only for FacesBetweenSurfacesSurface)

-------------------------------------

Getter Method

Signature ReverseDirection3

Returns:
Return type:bool

New in version NX8.5.0.

License requirements: None.

-------------------------------------

Setter Method

Signature ReverseDirection3

Parameters:reverseDirection3 (bool) –

New in version NX8.5.0.

License requirements: nx_ship_detail (“Ship Detail Design”)

SelectCSYSFace

Cutout2Builder.SelectCSYSFace

Returns the select csysface (only used for: SpecifyCSYS)

-------------------------------------

Getter Method

Signature SelectCSYSFace

Returns:
Return type:NXOpen.SelectNXObject

New in version NX8.0.0.

License requirements: None.

SelectLine1

Cutout2Builder.SelectLine1

Returns the select line1 (replaced by SelectReference1 in NX8.

-------------------------------------

Getter Method

Signature SelectLine1

Returns:
Return type:NXOpen.SelectNXObject

New in version NX8.0.0.

License requirements: None.

SelectLine2

Cutout2Builder.SelectLine2

Returns the select line2 (replaced by SelectReference2 in NX8.

-------------------------------------

Getter Method

Signature SelectLine2

Returns:
Return type:NXOpen.SelectNXObject

New in version NX8.0.0.

License requirements: None.

SelectReference1

Cutout2Builder.SelectReference1

Returns the reference1 (used only for Face2Lines, Faces2Surfaces, and FacesBetweenSurfacesSurface)

-------------------------------------

Getter Method

Signature SelectReference1

Returns:
Return type:NXOpen.SelectNXObject

New in version NX8.5.0.

License requirements: None.

SelectReference2

Cutout2Builder.SelectReference2

Returns the reference2 (used only for Face2Lines, Faces2Surfaces, and FacesBetweenSurfacesSurface)

-------------------------------------

Getter Method

Signature SelectReference2

Returns:
Return type:NXOpen.SelectNXObject

New in version NX8.5.0.

License requirements: None.

SelectReference3

Cutout2Builder.SelectReference3

Returns the reference3 (used only for FacesBetweenSurfacesSurface)

-------------------------------------

Getter Method

Signature SelectReference3

Returns:
Return type:NXOpen.SelectNXObject

New in version NX8.5.0.

License requirements: None.

SelectTargetFace

Cutout2Builder.SelectTargetFace

Returns the select target face

-------------------------------------

Getter Method

Signature SelectTargetFace

Returns:
Return type:NXOpen.SelectNXObject

New in version NX8.0.0.

License requirements: None.

SelectTargetFaces

Cutout2Builder.SelectTargetFaces

Returns the target faces (used only for: Faces2Surfaces, FacesBetweenSurfacesSurface, and FacesCentered)

-------------------------------------

Getter Method

Signature SelectTargetFaces

Returns:
Return type:NXOpen.SelectNXObjectList

New in version NX8.5.0.

License requirements: None.

SketchBlock

Cutout2Builder.SketchBlock

Returns the sketch block.

Users can specify the Cutout using a single sketch. The sketch type and its parameters are controlled by the NXOpen.Features.ShipDesign.SteelFeatureSpreadsheetBuilder.

-------------------------------------

Getter Method

Signature SketchBlock

Returns:
Return type:NXOpen.Features.ShipDesign.SteelFeatureSpreadsheetBuilder

New in version NX8.0.0.

License requirements: None.

Method Detail

Validate

Cutout2Builder.Validate

Validate whether the inputs to the component are sufficient for commit to be called.

If the component is not in a state to commit then an exception is thrown. For example, if the component requires you to set some property, this method will throw an exception if you haven’t set it. This method throws a not-yet-implemented NXException for some components.

Signature Validate()

Returns:Was self validation successful
Return type:bool

New in version NX3.0.1.

License requirements: None.