FlowCutSteepContainment Class¶
-
class
NXOpen.CAM.
FlowCutSteepContainment
¶ Bases:
NXOpen.TaggedObject
Represents a Steep Containment Builder
New in version NX7.5.0.
Properties¶
Property | Description |
---|---|
AddCenterPasses | Returns or sets the add center passes flag |
CutBetweenLevels | Returns or sets the cut between levels |
CutLevelType | Returns or sets the cut level type |
CutPattern | Returns the cut pattern builder |
DepthPerCut | Returns the builder of flow cut depth per cut |
FlowCutDirection | Returns or sets the Cut Direction |
NumberOfStepoversPerSide | Returns the number of stepovers per side builder (inheritable int) |
PatternDirection | Returns or sets the pattern direction |
Sequence | Returns the Sequence |
SteepCutDirection | Returns or sets the Steep Cut Direct |
Stepover | Returns the builder of flow cut stepover |
Tag | Returns the Tag for this object. |
Methods¶
Enumerations¶
FlowCutSteepContainmentCutDirectionTypes Enumeration | Available types for Cut Direction in Flow Cut |
FlowCutSteepContainmentCutLevelTypes Enumeration | cut level types |
FlowCutSteepContainmentPatternDirectionTypes Enumeration | Available types for Pattern Direction in Flow Cut |
FlowCutSteepContainmentSteepCutDirectionTypes Enumeration | Available types for Steep Cut Direct in Flow Cut |
Property Detail¶
AddCenterPasses¶
-
FlowCutSteepContainment.
AddCenterPasses
¶ Returns or sets the add center passes flag
-------------------------------------
Getter Method
Signature
AddCenterPasses
Returns: the add center passes toggle Return type: bool New in version NX9.0.3.
License requirements: None.
-------------------------------------
Setter Method
Signature
AddCenterPasses
Parameters: midPass (bool) – the add center passes flag New in version NX9.0.3.
License requirements: None.
CutBetweenLevels¶
-
FlowCutSteepContainment.
CutBetweenLevels
¶ Returns or sets the cut between levels
-------------------------------------
Getter Method
Signature
CutBetweenLevels
Returns: the cut between method Return type: bool New in version NX8.5.0.
License requirements: None.
-------------------------------------
Setter Method
Signature
CutBetweenLevels
Parameters: cutBetween (bool) – the cut between method New in version NX8.5.0.
License requirements: cam_base (“CAM BASE”)
CutLevelType¶
-
FlowCutSteepContainment.
CutLevelType
¶ Returns or sets the cut level type
-------------------------------------
Getter Method
Signature
CutLevelType
Returns: the cut level type Return type: NXOpen.CAM.FlowCutSteepContainmentCutLevelTypes
New in version NX8.5.0.
License requirements: None.
-------------------------------------
Setter Method
Signature
CutLevelType
Parameters: newValue ( NXOpen.CAM.FlowCutSteepContainmentCutLevelTypes
) – the cut level typeNew in version NX8.5.0.
License requirements: cam_base (“CAM BASE”)
CutPattern¶
-
FlowCutSteepContainment.
CutPattern
¶ Returns the cut pattern builder
-------------------------------------
Getter Method
Signature
CutPattern
Returns: Return type: NXOpen.CAM.CutPatternBuilder
New in version NX7.5.0.
License requirements: None.
DepthPerCut¶
-
FlowCutSteepContainment.
DepthPerCut
¶ Returns the builder of flow cut depth per cut
-------------------------------------
Getter Method
Signature
DepthPerCut
Returns: The depth per cut builder Return type: NXOpen.CAM.StepoverBuilder
New in version NX8.5.0.
License requirements: None.
FlowCutDirection¶
-
FlowCutSteepContainment.
FlowCutDirection
¶ Returns or sets the Cut Direction
-------------------------------------
Getter Method
Signature
FlowCutDirection
Returns: the Offset Mode value Return type: NXOpen.CAM.FlowCutSteepContainmentCutDirectionTypes
New in version NX7.5.0.
License requirements: None.
-------------------------------------
Setter Method
Signature
FlowCutDirection
Parameters: flowCutDirection ( NXOpen.CAM.FlowCutSteepContainmentCutDirectionTypes
) – the Offset Mode valueNew in version NX7.5.0.
License requirements: cam_base (“CAM BASE”)
NumberOfStepoversPerSide¶
-
FlowCutSteepContainment.
NumberOfStepoversPerSide
¶ Returns the number of stepovers per side builder (inheritable int)
-------------------------------------
Getter Method
Signature
NumberOfStepoversPerSide
Returns: The flow number of offset builder Return type: NXOpen.CAM.InheritableIntBuilder
New in version NX7.5.0.
License requirements: None.
PatternDirection¶
-
FlowCutSteepContainment.
PatternDirection
¶ Returns or sets the pattern direction
-------------------------------------
Getter Method
Signature
PatternDirection
Returns: the Pattern Direction value Return type: NXOpen.CAM.FlowCutSteepContainmentPatternDirectionTypes
New in version NX7.5.0.
License requirements: None.
-------------------------------------
Setter Method
Signature
PatternDirection
Parameters: propValue ( NXOpen.CAM.FlowCutSteepContainmentPatternDirectionTypes
) – the Pattern Deriction valueNew in version NX7.5.0.
License requirements: cam_base (“CAM BASE”)
Sequence¶
-
FlowCutSteepContainment.
Sequence
¶ Returns the Sequence
-------------------------------------
Getter Method
Signature
Sequence
Returns: Return type: NXOpen.CAM.Sequence
New in version NX7.5.0.
License requirements: cam_base (“CAM BASE”)
SteepCutDirection¶
-
FlowCutSteepContainment.
SteepCutDirection
¶ Returns or sets the Steep Cut Direct
-------------------------------------
Getter Method
Signature
SteepCutDirection
Returns: the Steep Cut Direct value Return type: NXOpen.CAM.FlowCutSteepContainmentSteepCutDirectionTypes
New in version NX7.5.0.
License requirements: None.
-------------------------------------
Setter Method
Signature
SteepCutDirection
Parameters: flowSteepCutDirect ( NXOpen.CAM.FlowCutSteepContainmentSteepCutDirectionTypes
) – the Steep Cut Direct valueNew in version NX7.5.0.
License requirements: cam_base (“CAM BASE”)
Stepover¶
-
FlowCutSteepContainment.
Stepover
¶ Returns the builder of flow cut stepover
-------------------------------------
Getter Method
Signature
Stepover
Returns: The stepover builder Return type: NXOpen.CAM.StepoverBuilder
New in version NX7.5.0.
License requirements: None.