TrimPoint Class¶
-
class
NXOpen.CAM.
TrimPoint
¶ Bases:
NXOpen.TaggedObject
Represents trim point
New in version NX6.0.0.
Properties¶
Property | Description |
---|---|
Angle | Returns the trim point angle |
AngleOffset | Returns the trim point angle offset |
AngleOption | Returns or sets the trim point angle option |
CheckPartGeometryBeyondTrim | Returns or sets the trim point check part geometry beyond trim |
ExtendDistance | Returns the trim point extend distance |
Option | Returns or sets the trim point option |
Point | Returns or sets the trim point |
RampAngle | Returns the trim point ramp angle |
RampAngleOffset | Returns the trim point ramp angle offset |
RampAngleOption | Returns or sets the trim point ramp angle option |
RampAngleVector | Returns or sets the trim point ramp angle vector |
Tag | Returns the Tag for this object. |
Vector | Returns or sets the trim point vector |
Methods¶
Enumerations¶
TrimPointAngleOptions Enumeration | The trim point angle options |
TrimPointOptions Enumeration | The trim point options |
TrimPointRampAngleOptions Enumeration | The trim point ramp angle options |
Property Detail¶
Angle¶
-
TrimPoint.
Angle
¶ Returns the trim point angle
-------------------------------------
Getter Method
Signature
Angle()
Returns: the trim point angle Return type: NXOpen.CAM.InheritableDoubleBuilder
New in version NX6.0.0.
License requirements: None.
AngleOffset¶
-
TrimPoint.
AngleOffset
¶ Returns the trim point angle offset
-------------------------------------
Getter Method
Signature
AngleOffset()
Returns: the trim point angle offset Return type: NXOpen.CAM.InheritableDoubleBuilder
New in version NX6.0.0.
License requirements: None.
AngleOption¶
-
TrimPoint.
AngleOption
¶ Returns or sets the trim point angle option
-------------------------------------
Getter Method
Signature
AngleOption()
Returns: the trim point angle option Return type: NXOpen.CAM.TrimPointAngleOptions
New in version NX6.0.0.
License requirements: None.
-------------------------------------
Setter Method
Signature
AngleOption(angleMode)
Parameters: angleMode ( NXOpen.CAM.TrimPointAngleOptions
) – the trim point angle optionNew in version NX6.0.0.
License requirements: cam_base (“CAM BASE”)
CheckPartGeometryBeyondTrim¶
-
TrimPoint.
CheckPartGeometryBeyondTrim
¶ Returns or sets the trim point check part geometry beyond trim
-------------------------------------
Getter Method
Signature
CheckPartGeometryBeyondTrim()
Returns: the trim point check part geometry beyond trim Return type: bool New in version NX6.0.0.
License requirements: None.
-------------------------------------
Setter Method
Signature
CheckPartGeometryBeyondTrim(checkPartGeometry)
Parameters: checkPartGeometry (bool) – the trim point check part geometry beyond trim New in version NX6.0.0.
License requirements: cam_base (“CAM BASE”)
ExtendDistance¶
-
TrimPoint.
ExtendDistance
¶ Returns the trim point extend distance
-------------------------------------
Getter Method
Signature
ExtendDistance()
Returns: the trim point extend distance Return type: NXOpen.CAM.InheritableDoubleBuilder
New in version NX6.0.0.
License requirements: None.
Option¶
-
TrimPoint.
Option
¶ Returns or sets the trim point option
-------------------------------------
Getter Method
Signature
Option()
Returns: the trim point option Return type: NXOpen.CAM.TrimPointOptions
New in version NX6.0.0.
License requirements: None.
-------------------------------------
Setter Method
Signature
Option(trimPointMode)
Parameters: trimPointMode ( NXOpen.CAM.TrimPointOptions
) – the trim point optionNew in version NX6.0.0.
License requirements: cam_base (“CAM BASE”)
Point¶
-
TrimPoint.
Point
¶ Returns or sets the trim point
-------------------------------------
Getter Method
Signature
Point()
Returns: the trim point Return type: NXOpen.Point
New in version NX6.0.0.
License requirements: None.
-------------------------------------
Setter Method
Signature
Point(point)
Parameters: point ( NXOpen.Point
) – the trim pointNew in version NX6.0.0.
License requirements: cam_base (“CAM BASE”)
RampAngle¶
-
TrimPoint.
RampAngle
¶ Returns the trim point ramp angle
-------------------------------------
Getter Method
Signature
RampAngle()
Returns: the trim point ramp angle Return type: NXOpen.CAM.InheritableDoubleBuilder
New in version NX7.5.0.
License requirements: None.
RampAngleOffset¶
-
TrimPoint.
RampAngleOffset
¶ Returns the trim point ramp angle offset
-------------------------------------
Getter Method
Signature
RampAngleOffset()
Returns: the trim point angle offset Return type: NXOpen.CAM.InheritableDoubleBuilder
New in version NX7.5.0.
License requirements: None.
RampAngleOption¶
-
TrimPoint.
RampAngleOption
¶ Returns or sets the trim point ramp angle option
-------------------------------------
Getter Method
Signature
RampAngleOption()
Returns: the trim point ramp angle option Return type: NXOpen.CAM.TrimPointRampAngleOptions
New in version NX7.5.0.
License requirements: None.
-------------------------------------
Setter Method
Signature
RampAngleOption(rampAngleMode)
Parameters: rampAngleMode ( NXOpen.CAM.TrimPointRampAngleOptions
) – the trim point ramp angle optionNew in version NX7.5.0.
License requirements: cam_base (“CAM BASE”)
RampAngleVector¶
-
TrimPoint.
RampAngleVector
¶ Returns or sets the trim point ramp angle vector
-------------------------------------
Getter Method
Signature
RampAngleVector()
Returns: the trim point ramp angle vector Return type: NXOpen.NXObject
New in version NX7.5.0.
License requirements: None.
-------------------------------------
Setter Method
Signature
RampAngleVector(rampVector)
Parameters: rampVector ( NXOpen.NXObject
) – the trim point ramp angle vectorNew in version NX7.5.0.
License requirements: cam_base (“CAM BASE”)
Vector¶
-
TrimPoint.
Vector
¶ Returns or sets the trim point vector
-------------------------------------
Getter Method
Signature
Vector()
Returns: the trim point vector Return type: NXOpen.NXObject
New in version NX6.0.0.
License requirements: None.
-------------------------------------
Setter Method
Signature
Vector(vector)
Parameters: vector ( NXOpen.NXObject
) – the trim point vectorNew in version NX6.0.0.
License requirements: cam_base (“CAM BASE”)