TurnEngageRetractBuilder Class¶
-
class
NXOpen.CAM.
TurnEngageRetractBuilder
¶ Bases:
NXOpen.TaggedObject
Represents a first plunge Builder
New in version NX6.0.0.
Properties¶
Property | Description |
---|---|
Angle | Returns or sets the Angle |
AutomaticOption | Returns or sets the Auto Engage(Retract) Option |
DeltaXc | Returns or sets the Delta XC |
DeltaYc | Returns or sets the Delta YC |
DirectTrimPoint | Returns or sets the Direct engage to(retract from) trim point |
Distance | Returns or sets the Distance |
EngageRetractType | Returns or sets the Engage(Retract) Type |
ExtendDistance | Returns or sets the Extend Distance |
ExtendMethod | Returns or sets the Extend Method |
FirstRadius | Returns or sets the First Radius |
IgnoreWorkpiece | Returns or sets the Ignore Workpiece |
Point | Returns or sets the point |
Radius | Returns or sets the Radius |
SafeDistance | Returns or sets the Safe Distance |
SecondRadius | Returns or sets the Second Radius |
Tag | Returns the Tag for this object. |
TangentialExtension | Returns or sets the Tangential Extension |
Methods¶
Enumerations¶
TurnEngageRetractBuilderAutoOptions Enumeration | The auto engage retract options |
TurnEngageRetractBuilderExtendMethods Enumeration | the extend method options |
TurnEngageRetractBuilderTypes Enumeration | The engage retract type |
Property Detail¶
Angle¶
-
TurnEngageRetractBuilder.
Angle
¶ Returns or sets the Angle
-------------------------------------
Getter Method
Signature
Angle()
Returns: the Angle value Return type: float New in version NX6.0.0.
License requirements: None.
-------------------------------------
Setter Method
Signature
Angle(angle)
Parameters: angle (float) – the Angle value New in version NX6.0.0.
License requirements: cam_base (“CAM BASE”)
AutomaticOption¶
-
TurnEngageRetractBuilder.
AutomaticOption
¶ Returns or sets the Auto Engage(Retract) Option
-------------------------------------
Getter Method
Signature
AutomaticOption()
Returns: the Auto Engage(Retract) Option value Return type: NXOpen.CAM.TurnEngageRetractBuilderAutoOptions
New in version NX6.0.0.
License requirements: None.
-------------------------------------
Setter Method
Signature
AutomaticOption(engageRetractOption)
Parameters: engageRetractOption ( NXOpen.CAM.TurnEngageRetractBuilderAutoOptions
) – the Auto Engage(Retract) Option valueNew in version NX6.0.0.
License requirements: cam_base (“CAM BASE”)
DeltaXc¶
-
TurnEngageRetractBuilder.
DeltaXc
¶ Returns or sets the Delta XC
-------------------------------------
Getter Method
Signature
DeltaXc()
Returns: the Delta XC value Return type: float New in version NX6.0.0.
License requirements: None.
-------------------------------------
Setter Method
Signature
DeltaXc(xc)
Parameters: xc (float) – the Delta XC value New in version NX6.0.0.
License requirements: cam_base (“CAM BASE”)
DeltaYc¶
-
TurnEngageRetractBuilder.
DeltaYc
¶ Returns or sets the Delta YC
-------------------------------------
Getter Method
Signature
DeltaYc()
Returns: the Delta YC value Return type: float New in version NX6.0.0.
License requirements: None.
-------------------------------------
Setter Method
Signature
DeltaYc(yc)
Parameters: yc (float) – the Delta YC value New in version NX6.0.0.
License requirements: cam_base (“CAM BASE”)
DirectTrimPoint¶
-
TurnEngageRetractBuilder.
DirectTrimPoint
¶ Returns or sets the Direct engage to(retract from) trim point
-------------------------------------
Getter Method
Signature
DirectTrimPoint()
Returns: the Direct engage to(retract from) trim point Return type: bool New in version NX6.0.0.
License requirements: None.
-------------------------------------
Setter Method
Signature
DirectTrimPoint(directTrimPoint)
Parameters: directTrimPoint (bool) – the Direct engage to(retract from) trim point New in version NX6.0.0.
License requirements: cam_base (“CAM BASE”)
Distance¶
-
TurnEngageRetractBuilder.
Distance
¶ Returns or sets the Distance
-------------------------------------
Getter Method
Signature
Distance()
Returns: the Distance value Return type: float New in version NX6.0.0.
License requirements: None.
-------------------------------------
Setter Method
Signature
Distance(distance)
Parameters: distance (float) – the Distance value New in version NX6.0.0.
License requirements: cam_base (“CAM BASE”)
EngageRetractType¶
-
TurnEngageRetractBuilder.
EngageRetractType
¶ Returns or sets the Engage(Retract) Type
-------------------------------------
Getter Method
Signature
EngageRetractType()
Returns: the Engage(Retract) Type value Return type: NXOpen.CAM.TurnEngageRetractBuilderTypes
New in version NX6.0.0.
License requirements: None.
-------------------------------------
Setter Method
Signature
EngageRetractType(engageRetractType)
Parameters: engageRetractType ( NXOpen.CAM.TurnEngageRetractBuilderTypes
) – the Engage(Retract) Type valueNew in version NX6.0.0.
License requirements: cam_base (“CAM BASE”)
ExtendDistance¶
-
TurnEngageRetractBuilder.
ExtendDistance
¶ Returns or sets the Extend Distance
-------------------------------------
Getter Method
Signature
ExtendDistance()
Returns: the Extend Distance value Return type: float New in version NX6.0.0.
License requirements: None.
-------------------------------------
Setter Method
Signature
ExtendDistance(extendDistance)
Parameters: extendDistance (float) – the Extend Distance value New in version NX6.0.0.
License requirements: cam_base (“CAM BASE”)
ExtendMethod¶
-
TurnEngageRetractBuilder.
ExtendMethod
¶ Returns or sets the Extend Method
-------------------------------------
Getter Method
Signature
ExtendMethod()
Returns: the Extend Method value Return type: NXOpen.CAM.TurnEngageRetractBuilderExtendMethods
New in version NX7.5.0.
License requirements: None.
-------------------------------------
Setter Method
Signature
ExtendMethod(newValue)
Parameters: newValue ( NXOpen.CAM.TurnEngageRetractBuilderExtendMethods
) – the Extend Method valueNew in version NX7.5.0.
License requirements: cam_base (“CAM BASE”)
FirstRadius¶
-
TurnEngageRetractBuilder.
FirstRadius
¶ Returns or sets the First Radius
-------------------------------------
Getter Method
Signature
FirstRadius()
Returns: the First Radius value Return type: float New in version NX6.0.0.
License requirements: None.
-------------------------------------
Setter Method
Signature
FirstRadius(firstRadius)
Parameters: firstRadius (float) – the First Radius value New in version NX6.0.0.
License requirements: cam_base (“CAM BASE”)
IgnoreWorkpiece¶
-
TurnEngageRetractBuilder.
IgnoreWorkpiece
¶ Returns or sets the Ignore Workpiece
-------------------------------------
Getter Method
Signature
IgnoreWorkpiece()
Returns: the Ignore Workpiece Return type: bool New in version NX9.0.0.
License requirements: None.
-------------------------------------
Setter Method
Signature
IgnoreWorkpiece(ignoreWorkpiece)
Parameters: ignoreWorkpiece (bool) – the Ignore Workpiece New in version NX9.0.0.
License requirements: cam_base (“CAM BASE”)
Point¶
-
TurnEngageRetractBuilder.
Point
¶ Returns or sets the point
-------------------------------------
Getter Method
Signature
Point()
Returns: the point value Return type: NXOpen.Point
New in version NX6.0.0.
License requirements: None.
-------------------------------------
Setter Method
Signature
Point(turnPoint)
Parameters: turnPoint ( NXOpen.Point
) – the point valueNew in version NX6.0.0.
License requirements: cam_base (“CAM BASE”)
Radius¶
-
TurnEngageRetractBuilder.
Radius
¶ Returns or sets the Radius
-------------------------------------
Getter Method
Signature
Radius()
Returns: the Radius value Return type: float New in version NX6.0.0.
License requirements: None.
-------------------------------------
Setter Method
Signature
Radius(radius)
Parameters: radius (float) – the Radius value New in version NX6.0.0.
License requirements: cam_base (“CAM BASE”)
SafeDistance¶
-
TurnEngageRetractBuilder.
SafeDistance
¶ Returns or sets the Safe Distance
-------------------------------------
Getter Method
Signature
SafeDistance()
Returns: the Safe Distance value Return type: float New in version NX6.0.0.
License requirements: None.
-------------------------------------
Setter Method
Signature
SafeDistance(safeDistance)
Parameters: safeDistance (float) – the Safe Distance value New in version NX6.0.0.
License requirements: cam_base (“CAM BASE”)
SecondRadius¶
-
TurnEngageRetractBuilder.
SecondRadius
¶ Returns or sets the Second Radius
-------------------------------------
Getter Method
Signature
SecondRadius()
Returns: the Second Radius value Return type: float New in version NX6.0.0.
License requirements: None.
-------------------------------------
Setter Method
Signature
SecondRadius(secondRadius)
Parameters: secondRadius (float) – the Second Radius value New in version NX6.0.0.
License requirements: cam_base (“CAM BASE”)
TangentialExtension¶
-
TurnEngageRetractBuilder.
TangentialExtension
¶ Returns or sets the Tangential Extension
-------------------------------------
Getter Method
Signature
TangentialExtension()
Returns: the Tangential Extension Return type: bool New in version NX6.0.0.
License requirements: None.
-------------------------------------
Setter Method
Signature
TangentialExtension(tangentialExtension)
Parameters: tangentialExtension (bool) – the Tangential Extension New in version NX6.0.0.
License requirements: cam_base (“CAM BASE”)