LaserCutoutDefinition Class¶
-
class
NXOpen.CAM.
LaserCutoutDefinition
¶ Bases:
NXOpen.TaggedObject
Represents cutout definition settings for laser move
New in version NX9.0.0.
Properties¶
Property | Description |
---|---|
Angle | Returns or sets the Angle |
CenterPoint | Returns or sets the Center Point |
CornerRadius | Returns or sets the Corner Radius |
CutoutDefType | Returns or sets the Cutout Definition Type |
CutoutSection | Returns or sets the Cutout Section |
Diameter | Returns or sets the Diameter |
Length | Returns or sets the Length |
Tag | Returns the Tag for this object. |
Width | Returns or sets the Width |
WrenchSize | Returns or sets the Wrench Size |
Methods¶
Enumerations¶
LaserCutoutDefinitionTypes Enumeration | the Cutout Definition Type enum |
Property Detail¶
Angle¶
-
LaserCutoutDefinition.
Angle
¶ Returns or sets the Angle
-------------------------------------
Getter Method
Signature
Angle()
Returns: the angle value Return type: float New in version NX9.0.0.
License requirements: None.
-------------------------------------
Setter Method
Signature
Angle(newValue)
Parameters: newValue (float) – the angle value New in version NX9.0.0.
License requirements: cam_base (“CAM BASE”)
CenterPoint¶
-
LaserCutoutDefinition.
CenterPoint
¶ Returns or sets the Center Point
-------------------------------------
Getter Method
Signature
CenterPoint()
Returns: the center point Return type: NXOpen.Point
New in version NX9.0.0.
License requirements: None.
-------------------------------------
Setter Method
Signature
CenterPoint(newValue)
Parameters: newValue ( NXOpen.Point
) – the center pointNew in version NX9.0.0.
License requirements: cam_base (“CAM BASE”)
CornerRadius¶
-
LaserCutoutDefinition.
CornerRadius
¶ Returns or sets the Corner Radius
-------------------------------------
Getter Method
Signature
CornerRadius()
Returns: the corner radius value Return type: float New in version NX9.0.0.
License requirements: None.
-------------------------------------
Setter Method
Signature
CornerRadius(newValue)
Parameters: newValue (float) – the corner radius value New in version NX9.0.0.
License requirements: cam_base (“CAM BASE”)
CutoutDefType¶
-
LaserCutoutDefinition.
CutoutDefType
¶ Returns or sets the Cutout Definition Type
-------------------------------------
Getter Method
Signature
CutoutDefType()
Returns: the cutout def type Return type: NXOpen.CAM.LaserCutoutDefinitionTypes
New in version NX9.0.0.
License requirements: None.
-------------------------------------
Setter Method
Signature
CutoutDefType(type)
Parameters: type ( NXOpen.CAM.LaserCutoutDefinitionTypes
) – the cutout def typeNew in version NX9.0.0.
License requirements: cam_base (“CAM BASE”)
CutoutSection¶
-
LaserCutoutDefinition.
CutoutSection
¶ Returns or sets the Cutout Section
-------------------------------------
Getter Method
Signature
CutoutSection()
Returns: the Cutout Section Return type: NXOpen.Section
New in version NX9.0.0.
License requirements: None.
-------------------------------------
Setter Method
Signature
CutoutSection(cutoutSection)
Parameters: cutoutSection ( NXOpen.Section
) – the Cutout SectionNew in version NX9.0.0.
License requirements: cam_base (“CAM BASE”)
Diameter¶
-
LaserCutoutDefinition.
Diameter
¶ Returns or sets the Diameter
-------------------------------------
Getter Method
Signature
Diameter()
Returns: the diameter value Return type: float New in version NX9.0.0.
License requirements: None.
-------------------------------------
Setter Method
Signature
Diameter(newValue)
Parameters: newValue (float) – the diameter value New in version NX9.0.0.
License requirements: cam_base (“CAM BASE”)
Length¶
-
LaserCutoutDefinition.
Length
¶ Returns or sets the Length
-------------------------------------
Getter Method
Signature
Length()
Returns: the length value Return type: float New in version NX9.0.0.
License requirements: None.
-------------------------------------
Setter Method
Signature
Length(newValue)
Parameters: newValue (float) – the length value New in version NX9.0.0.
License requirements: cam_base (“CAM BASE”)
Width¶
-
LaserCutoutDefinition.
Width
¶ Returns or sets the Width
-------------------------------------
Getter Method
Signature
Width()
Returns: the width value Return type: float New in version NX9.0.0.
License requirements: None.
-------------------------------------
Setter Method
Signature
Width(newValue)
Parameters: newValue (float) – the width value New in version NX9.0.0.
License requirements: cam_base (“CAM BASE”)
WrenchSize¶
-
LaserCutoutDefinition.
WrenchSize
¶ Returns or sets the Wrench Size
-------------------------------------
Getter Method
Signature
WrenchSize()
Returns: the wrench size value Return type: float New in version NX9.0.0.
License requirements: None.
-------------------------------------
Setter Method
Signature
WrenchSize(newValue)
Parameters: newValue (float) – the wrench size value New in version NX9.0.0.
License requirements: cam_base (“CAM BASE”)