Version |
PR Number |
Description |
Application |
Function |
Sub Function |
1859 |
8384513 |
Positioning in Assembly |
ASSEMBLIES |
POSITIONING |
MOVE_COMPONENT |
1859 |
8391160 |
Loading part takes a long time |
ASSEMBLIES |
ASSEMBLY_MODEL |
PROD_INTERFACES |
1859 |
8397109 |
Suppress/Unsupress action is causing Update of Interpart Link |
DESIGN |
WAVE |
UPDATE |
1859 |
8399182 |
Wrong Geometry of Linked Body |
DESIGN |
WAVE |
UPDATE |
1859 |
8404780 |
Wrap Curve freezes NX session after adding hole to sheet metal parts |
DESIGN |
CURVE |
WRAP/UNWRAP |
1859 |
8405923 |
Specialist Durability Solver does not run with Tokens |
SIMCENTER 3D |
ADV_SIMULATION |
DUR_SPEC_SOLV |
1859 |
8408779 |
Misleading deprecated notes in NX 12 Routing APV XML and README files |
ROUTING_GENERAL |
ADMINISTRATION |
NXOPEN |
1859 |
8556473 |
Regenerate the NX8.5 toolpath in NX 12 and the cut levels changes to incorrect |
CAM |
ZLEVEL_MILL |
OTHER |
1859 |
8557103 |
Use Environment Variable UGII_PRESOLVER option of Fan noise simulation in SC3D |
SIMCENTER 3D |
ADV_SIMULATION |
SYSNOISE_SOLVER |
1859 |
9048499 |
component moves twice the intended distance |
ASSEMBLIES |
POSITIONING |
MOVE_COMPONENT |
1859 |
9169546 |
Part attributes dropped from part created with different item type. |
ROUTING_GENERAL |
PART |
PLACE_PART |
1859 |
9189662 |
Loading Drawing File from a Booklet takes a long time |
NXMANAGER |
DRAFTING |
DRW_BOOKLETS |
1859 |
9195242 |
Flat pattern bend radii callout does not maintain units |
NX_SHEET_METAL |
FLAT_PATTERN |
ALL |
1859 |
9199949 |
ANT Column are preforming a where Partitioned call taking time when expanding |
NXMANAGER |
FILE_OPEN |
PERFORMANCE |
1859 |
9201359 |
\225TextureSpace Type\226 is reset to \227Box\231 wrongly for custom system material. |
SYSENG |
VISUALIZATION |
MATERLSTEXTURES |
1859 |
9224893 |
Radial Popups under Windows10 not working reliably |
SYSENG |
UI_TOOLS |
TOOLBAR |
1859 |
9230608 |
Mandatory attribute not working for PTS Template while saving |
NXMANAGER |
FILE_SAVE |
ALL |
1859 |
9250193 |
Internal error when Tilt Tool Axis option is applied into an operation |
CAM |
TOOL_PATH |
TOOL_AXIS_TILT |
1859 |
9276314 |
Modified after opening |
SIMCENTER 3D |
ADV_SIMULATION |
PHYS_PROP_TABLE |
1859 |
9292990 |
Error message is not displayed/ouput if wrong value is entered in \225 Data Validation |
GATEWAY |
SPREADSHEET |
ALL |
1859 |
9295980 |
Load part from Reuse library raises Create dialog failed |
KDA |
REUSE_LIBRARY |
REUSE_TC_LIB |
1859 |
9296684 |
wrong angle with circular slot feature |
CAM |
FEATURE_BASED |
FEATURE_RECOGNI |
1859 |
9304144 |
Spreadsheet input restriction is disabled. |
GATEWAY |
SPREADSHEET |
ALL |
1859 |
9305356 |
Move Component gives error Incorrect object for this operation |
ASSEMBLIES |
POSITIONING |
MOVE_COMPONENT |
1859 |
9310692 |
Component in Sub-assembly moves twice the distance as intended. |
ASSEMBLIES |
POSITIONING |
MOVE_COMPONENT |
1859 |
9312513 |
Dimension loses associativity to hole on Section View after changes to model |
DRAFTING |
DRAWING/VIEW |
SECTION_VW |
1859 |
9317097 |
Save As Issue for Boolean Property in NX |
NXMANAGER |
FILE_SAVE_AS |
NEW_ITEM |
1859 |
9322795 |
Radial Popup menu does not work after applying Windows update program |
SYSENG |
UI_TOOLS |
TOOLBAR |
1859 |
9325427 |
Message The part contains a reference to a native part when trying to save |
NXMANAGER |
FILE_SAVE |
ALL |
1859 |
9325518 |
NX Iray Save Rendering Material not storing global texture configuration |
SYSENG |
VISUALIZATION |
MATERLSTEXTURES |
1859 |
9325536 |
dragging MEAS points returns internal memory errors |
CMM_INSPECTION |
PATH |
ALL |
1859 |
9326011 |
The behavior of the radial menu is wrong with Windows 10. |
SYSENG |
UI_TOOLS |
TOOLBAR |
1859 |
9326906 |
Overshooting Radial shortcuts in NX12 is inconsistent |
SYSENG |
UI_TOOLS |
TOOLBAR |
1859 |
9328938 |
RCPs defined in deformable parts stays at space |
ROUTING_GENERAL |
PART |
DEFORMABLE_PART |
1859 |
9331348 |
Wrong detection of a feature |
CAM |
FEATURE_BASED |
FEATURE_RECOGNI |
1859 |
9331517 |
Transparency in PNG image should apply to background only |
SYSENG |
VISUALIZATION |
EXPORT_IMAGE |
1859 |
9332770 |
Unable to open assembly due to memory access violation. |
ASSEMBLIES |
ASSEMBLY_MODEL |
COMP_SUPPRESS |
1859 |
9332878 |
Deformable part with Route control point gets modfied when deformed |
ROUTING_GENERAL |
PART |
DEFORMABLE_PART |
1859 |
9339194 |
Stock Report output changes depending on sort order of connection navigator |
ROUTING_ELEC |
CONNECTION_LIST |
STOCK_REPORT |
1859 |
9339656 |
Stock as Component in Tc Environment creates Stock ItemID with MFK string |
ROUTING_GENERAL |
STOCK_AS_COMP |
INSERT_STOCK |
1859 |
9340005 |
Radial Shortcut does not work properly in Windows 10. |
SYSENG |
UI_TOOLS |
TOOLBAR |
1859 |
9342667 |
Reload routing part library ignores active specification |
ROUTING_GENERAL |
REUSE_LIBRARY |
SPECIFICATIONS |
1859 |
9342957 |
Ghost Boxes in the image created by File Export Image |
SYSENG |
VISUALIZATION |
EXPORT_IMAGE |
1859 |
9347814 |
Export Image: Transparent Body + Transparent Background vs White Background |
SYSENG |
VISUALIZATION |
EXPORT_IMAGE |
1859 |
9352208 |
Error in external Library error when creating Adaptive Milling operation |
CAM |
ADAPTIVE_MILL |
ALL |
1859 |
9357497 |
add reusable component save error |
NXMANAGER |
FILE_SAVE |
ALL |
1859 |
9358809 |
Not setting FeedbackPoint in an MCD Joint causes MCD to crash on accessing it |
MECHATRONICS |
JOINT |
SLIDING |
1859 |
9361856 |
MCD crash/exit when using a Fixed Joint to attach a Rigid Body to a Proxy Object |
MECHATRONICS |
JOINT |
FIXED |
1859 |
9362334 |
Image export error with dimension and transparent background |
SYSENG |
VISUALIZATION |
EXPORT_IMAGE |
1859 |
9363516 |
Polygonised arc size exceeded 1Gb memory when running Verify |
CAM |
VERIFY |
3D_DYNAMIC |
1859 |
9365655 |
Error opening 4GD work set with obsolete DEs |
ASSEMBLIES |
ASSEMBLY_MODEL |
USABILITY |
1859 |
9367339 |
Assembly part file cannot be loaded with components due to IE |
ASSEMBLIES |
PART_FILE_OPS |
OPEN_UG_PART |
1859 |
9368282 |
Problem loading CAM assembly parts in NX 12.0.2 |
CAM |
OPERATION |
OTHER |
1859 |
9374379 |
Rendering tool System Scenes does not work in Simcenter |
SIMCENTER 3D |
PROCESS_STUDIO |
APPLY_WIZARD |
1859 |
9379338 |
Floor stock is not applied to the intermediate floor faces. |
CAM |
ZLEVEL_MILL |
OTHER |
1859 |
9411937 |
Opening CAM-Setup needs extremely long time |
CAM |
OPERATION |
OTHER |
1855 |
1986655 |
Component is spuriously flipped during formboard update |
ROUTING_ELEC |
FORMBOARD_V2 |
UPDATE_FMBD |
1855 |
8386410 |
Expressions Dialog: ENTER and TAB functionality |
SYSENG |
UI_COMPONENTS |
TABLE_EDIT_BLK |
1855 |
8388993 |
Complement Arc flips to wrong side when applying Arc/Circle UI |
DESIGN |
CURVE |
CIRCLE/ARC |
1855 |
8391160 |
loading_part_takes_a_long_time |
ASSEMBLIES |
ASSEMBLY_MODEL |
PROD_INTERFACES |
1855 |
8391875 |
Save Abort |
DESIGN |
FEATURE_MODEL |
EXTRACT_FACE |
1855 |
8395771 |
PI_out_of_date_with_delay_update_on |
DESIGN |
DESIGN_GROUPS |
UNDETERMINED |
1855 |
8397109 |
Supress/Unsupress action is causing Update of Interpart Link |
DESIGN |
WAVE |
UPDATE |
1855 |
8399182 |
Wrong geometry of Linked Body |
DESIGN |
WAVE |
UPDATE |
1855 |
8403772 |
Object contains geometry not in the current reference set |
CAM |
OPERATION |
OTHER |
1855 |
8404474 |
Placement of a cut elbow in Routing adds item as Part Family Member |
ROUTING_MECH |
TOOLS |
CUT_ELBOW |
1855 |
8522338 |
Cavity mill gouge the model |
CAM |
CAVITY_MILLING |
OTHER |
1855 |
8535144 |
gouge motion in cavity mill |
CAM |
CAVITY_MILLING |
OTHER |
1855 |
8556124 |
About PLOT element ID error of Nastran model based on UNV file |
SIMCENTER 3D |
ADV_SIMULATION |
FEMALTREP_SET |
1855 |
8961308 |
DPM feed rate is not correct from the post |
CAM |
POSTBUILDER |
POSTPROCESS |
1855 |
8971812 |
NX11 regression - Library is missing required entry point |
ROUTING_GENERAL |
ADMINISTRATION |
NXOPEN |
1855 |
9009913 |
G74 (Pecking cycle) Cycle Z value is not output correctly |
CAM |
POSTBUILDER |
INTERACTIVE |
1855 |
9204842 |
Tool Vector become different after adding new toolpath lines through API |
CAM |
JOURNALING |
ALL |
1855 |
9220909 |
WEIGHT value is being transformed during PLMXML route list import |
ROUTING_ELEC |
CONNECTION_LIST |
IMPORT_ALL |
1855 |
9266653 |
An error occurred during computation of part off cut |
CAM |
TURNING |
IPW |
1855 |
9280573 |
NC: Internal error while check sheets of profile sketch |
DRAFTING |
AUTOMATION |
BOOKLETS |
1855 |
9285688 |
sim09 runs with limitations and collisions |
CAM |
POSTPROCESS |
ALL |
1855 |
9288403 |
Incorrect Posted output in the middle of operation |
CAM |
POSTPROCESS |
NX_POST |
1855 |
9290549 |
unable to edit operations where the Cut Area selection uses removed faces |
CAM |
OPERATION |
OTHER |
1855 |
9292465 |
Failure to follow feed rate values from short segments |
CAM |
TURNING |
FINISH |
1855 |
9302264 |
Toolpath Insert API create different Tool Vector |
CAM |
JOURNALING |
ALL |
1855 |
9303699 |
Arc command does not function unless used with non-associativity |
DESIGN |
CURVE |
EDIT_CIRCLE/ARC |
1855 |
9311026 |
Realize Shape Cage Control Entities Remain Stranded on Original Layer |
STUDIO_DESIGN |
SUBDIVISION |
SELECTION |
1855 |
9312496 |
Individual Routing Segments not selectable in NX 12 in Modeling Mode |
ROUTING_GENERAL |
PREFERENCES |
ROUTING |
1855 |
9319909 |
Getting no such variable error when opening a post in Post Builder NX 12.0.1 |
CAM |
POSTBUILDER |
INTERACTIVE |
1855 |
9325199 |
NX 12 Issue - Reference set error on generating operation |
CAM |
OPERATION |
OTHER |
1855 |
9325481 |
Elbow boots flip 180 degrees on formboard update |
ROUTING_ELEC |
FORMBOARD_V2 |
UPDATE_FMBD |
1855 |
9325629 |
NX CAM Tool with holder insertion longer than tool length no longer possible |
CAM |
TOOLS |
ALL |
1855 |
9326336 |
Open in Window cause display flickering problems |
DESIGN |
FEATURE_MODEL |
MOVE_OBJECT |
1855 |
9326362 |
Toolpath Time computed 0sec with negative length |
CAM |
BASIC_FUNCTIONS |
UNDETERMINED |
1855 |
9328709 |
NX Materials Management/Assign not updated after setting customer defaults |
SIMCENTER 3D |
ADV_SIMULATION |
MATERIALS |
1855 |
9333875 |
Placement of a cut elbow in Routing adds item as Part Family Member |
ROUTING_MECH |
TOOLS |
CUT_ELBOW |
1855 |
9336876 |
Formboard Rotate Component not working for elbow boots |
ROUTING_ELEC |
FORMBOARD_V2 |
FLIP_COMPONENT |
1855 |
9339244 |
No cut regions are found in NX 12 |
CAM |
TURNING |
IPW |
1855 |
9343308 |
No tool holder geometries are created if the turning tool is a parametric tool |
CAM |
ISV |
MACH_CODE_BASED |
1855 |
9349727 |
User Exit USER_SCOMP2 (ufscpi) does not preset component in NX 1847 |
ASSEMBLIES |
ASSEMBLY_MODEL |
COMP_REPLACE |
1855 |
9353997 |
Port update renames ports and removes pins on an electrical connector |
ROUTING_GENERAL |
PART |
QUALIFY_PART |
1855 |
9356314 |
Machine Simulation - material removal with dual tracking point Groove tool |
CAM |
TURNING |
IPW |
1855 |
9359955 |
Operation cannot be generated the reference is not found |
CAM |
OPERATION |
OTHER |
1851 |
7568837 |
MRL: unable to create or update ICOs for part family members with Graphicsbuilder |
CLASSIFICATION |
ADMIN |
UNDETERMINED |
1851 |
8382872 |
NX session freezes when opening part file |
DESIGN |
FREE_FORM_MODEL |
TRIM_EXTEND |
1851 |
8382981 |
File Open takes more than 10 minutes |
DESIGN |
FREE_FORM_MODEL |
TRIM_EXTEND |
1851 |
8390954 |
Threaded Hole - Inch BSP: Inch value changes to MM. value |
DESIGN |
FEATURE_MODEL |
HOLE |
1851 |
8395265 |
Fixed Unfolded Length Type for Resize Bend Radius changes geometry of the part |
NX_SHEET_METAL |
RESIZE_BEND_RAD |
ALL |
1851 |
8397165 |
Drawn Cutout wrong result using side angle and Material Outside |
NX_SHEET_METAL |
DRAWN_CUTOUT |
ALL |
1851 |
8400639 |
2 NX sessions/users can save same NX part. They overwrite each other’s data |
ASSEMBLIES |
PART_FILE_OPS |
PART_SAVE |
1851 |
8404532 |
Flange not working no OK available |
NX_SHEET_METAL |
FLANGE |
ALL |
1851 |
8555240 |
The applying of the Magnitude/Phase data on Simcenter 3D Table Field |
SIMCENTER 3D |
ADV_SIMULATION |
FIELDS |
1851 |
8825055 |
NX CMM and Mfg Planning |
CMM_INSPECTION |
TC_INTEGRATION |
ALL |
1851 |
8925750 |
Electrical routing component not selectable when adding to component navigator |
ROUTING_ELEC |
CONNECTION_LIST |
CREATE_CONN |
1851 |
9008238 |
TC 11.2.3 patch 1: Classification Admin and part measurements |
CLASSIFICATION |
ADMIN |
UNDETERMINED |
1851 |
9129448 |
In classification we cannot get the Imperial and Metric class to accept both |
CLASSIFICATION |
ADMIN |
UNDETERMINED |
1851 |
9213556 |
Divide ToolPath Corrupt the Part. Part cannot be saved |
CAM |
TOOL_PATH |
DIVIDE |
1851 |
9231200 |
Threaded Hole fixed depth mixed unit is incorrect depth |
DESIGN |
FEATURE_MODEL |
HOLE |
1851 |
9233936 |
Post Builder PPs produce incorrect output when read ahead is active |
CAM |
POSTBUILDER |
POSTPROCESS |
1851 |
9244932 |
Advance Flange does not give the right unfold bend length |
ADV_SHEET_METAL |
ADVANCED_FLANGE |
ALL |
1851 |
9254441 |
Event MOM_cutcom_off missed with Turbo Mode |
CAM |
POSTPROCESS |
NX_POST |
1851 |
9258391 |
NPT Threaded hole threads not shown properly |
DESIGN |
FEATURE_MODEL |
HOLE |
1851 |
9262077 |
point to point operations are not assigned correct cycle type in NX 12 |
CAM |
POSTBUILDER |
POSTPROCESS |
1851 |
9264866 |
Newly created thread definition disappears when NPT thread hole is reordered |
DESIGN |
FEATURE_MODEL |
HOLE |
1851 |
9274836 |
DE attribute values on manufacturing parts not retained |
NXMANAGER |
FILE_SAVE |
WORKSET |
1851 |
9282553 |
Missing or Wrong Mom Variable mom_arc_start_angle in NX 12 |
CAM |
POSTPROCESS |
ALL |
1851 |
9283729 |
Post Configurator gives Wrong MOM Variable mom_cycle_type |
CAM |
POSTBUILDER |
POSTPROCESS |
1851 |
9285609 |
Wrong value with Solid Property Check |
SIMCENTER 3D |
ADV_SIMULATION |
CHK_MASS_PROPS |
1851 |
9295477 |
Closed Corner: the SM part is cut off at one side |
NX_SHEET_METAL |
CLOSED_CORNER |
ALL |
1851 |
9297844 |
Heal Path Spline missing 2 Assembly Constraint (Slope Constraint) |
ROUTING_GENERAL |
PATH |
HEAL_PATH |
1851 |
9298549 |
Missing Assembly Constraint on Heal Path |
ROUTING_GENERAL |
PATH |
HEAL_PATH |
1851 |
9298814 |
Editing feature affects component display state of other window |
ASSEMBLIES |
ASSEMBLY_MODEL |
REPRESENTATION |
1851 |
9300257 |
Sheet Metal - U cutout changes |
NX_SHEET_METAL |
CLOSED_CORNER |
ALL |
1851 |
9300686 |
Save failed after divide tool path |
CAM |
TOOL_PATH |
DIVIDE |
1851 |
9300826 |
The update mark of the drawing does not disappear |
DRAFTING |
DRAWING/VIEW |
VW_STATUS |
1851 |
9301737 |
Flat Pattern fails after Move Face |
NX_SHEET_METAL |
FLAT_PATTERN |
ALL |
1851 |
9302440 |
Show Hide of assembly geometry no longer possible when component is work part |
GATEWAY |
BLANK_UI |
SHOW_AND_HIDE |
1851 |
9303598 |
Flat Pattern fails when Circular Cutout is created |
NX_SHEET_METAL |
FLAT_SOLID |
ALL |
1851 |
9303795 |
Units - Inch Part - Metric Thread - thread depth is interpreted wrong |
DESIGN |
FEATURE_MODEL |
HOLE |
1851 |
9304885 |
Single Port Pipe Welds Does not reach the Joint Set Type Callback |
KDA |
WELD_ASSISTANT |
SURFACE_WELD |
1851 |
9305356 |
Move Component gives error Incorrect object for this operation |
ASSEMBLIES |
POSITIONING |
MOVE_COMPONENT |
1851 |
9305596 |
Line Designer license gets checked out automatically when starting NX |
MFG_LINE_DESIG |
GENERAL |
ALL |
1851 |
9305708 |
VSTS12775 - Probe Structured Field create - incorrect values for Radial(axis) |
SIMCENTER 3D |
ADV_SIMULATION |
POST_PROBE |
1851 |
9307285 |
A Flange can be changed and cannot be changed |
NX_SHEET_METAL |
FLANGE |
ALL |
1851 |
9308531 |
Flat Pattern fails |
NX_SHEET_METAL |
FLAT_SOLID |
ALL |
1851 |
9310151 |
Material is getting removed after running a feature playback. |
ROUTING_GENERAL |
STOCK_AS_COMP |
OVERSTOCK |
1851 |
9311018 |
Units - Inch Part - Metric Thread - thread depth is interpreted |
DESIGN |
FEATURE_MODEL |
HOLE |
1851 |
9312821 |
Failed to send large assembly data to NXVR |
SYSENG |
VIRTUAL_REALITY |
USER_INTERFACE |
1851 |
9315191 |
Assembly with replica part causes nxtocgmdirect to leave UGPART checked-out in TC |
NXMANAGER |
LOCKING |
CHECKIN_CHKOUT |
1851 |
9319533 |
slash character not honored in plmxml import |
ROUTING_ELEC |
CONNECTION_LIST |
IMPORT_UPDATE |
1851 |
9325690 |
Differences in hiding bodies when using Make Work Part in Assemblies |
GATEWAY |
BLANK_UI |
SHOW_AND_HIDE |
1851 |
9328167 |
while making a make unique NX returns an Internal error: memory access violation |
ASSEMBLIES |
ASSEMBLY_MODEL |
COMP_REPLACE |
1851 |
9328414 |
Line Designer license gets automatically checked out after NX is launched |
MFG_LINE_DESIG |
GENERAL |
ALL |
1851 |
9330083 |
ld_line_designer license is pulled without reason |
MFG_LINE_DESIG |
GENERAL |
ALL |
1851 |
9331111 |
Line Designer license gets automatically checked out after NX is launched |
MFG_LINE_DESIG |
GENERAL |
ALL |
1851 |
9336205 |
Overriding Nominal number in Tolerance Operation does not work anymore |
CMM_INSPECTION |
OTHER |
ALL |
1851 |
8406889 |
Catia V4 External Translator does not start |
SYSENG |
INSTALL_ISSUES |
ALL |
1851 |
8406892 |
STEP AP203 External Translator does not start |
SYSENG |
INSTALL_ISSUES |
ALL |
1851 |
8406893 |
STEP AP214 External Translator does not start |
SYSENG |
INSTALL_ISSUES |
ALL |
1851 |
9365346 |
Catia V5 External Translator does not start |
SYSENG |
INSTALL_ISSUES |
ALL |