Fixed
Problem Reports
NX 12.0
|
1127755 |
Invalid bend angle in .geo file |
|
1129408 |
SM bend tangent lines do not follow the setting (deactivating its creation) |
|
1479770 |
ug_thru_curve creates wrong geometry |
|
1840984 |
Replace Component dialog ignores entry in the Customer Defaults |
|
1890438 |
Cannot Import dwg file |
|
1895805 |
PRO: ModelingViewHighQualityImage > Save doesn't work in batch mode |
|
1929790 |
Z Level Mill produces wrong toolpath |
|
1932268 |
RPO: Pattern Feature with Slot and tangential position dim is not concentric. |
|
1938453 |
UF_DRF_draw_to_position_fn_t -> last_status parameter is always 0 |
|
1939430 |
Stress results incorrect when plotted with respect to the material csys |
|
1944776 |
NX does not import results when it contains CBUSH1D Stress output (axial force). |
|
1945109 |
Attribute mapping issue |
|
1947497 |
Incorrect Cycle Time in Synchronization Manager |
|
1950217 |
NX CAM Turning flip tool doesn't show correct internal tool path |
|
1950228 |
Missing Cutting-Line after creating Flat Pattern of Louver |
|
1950359 |
Incorrect interior Cutout after creating Flat Pattern of a lanced Louver |
|
1951328 |
Problem using sheet metal from solid in NX8.5 and NX9 ph18 |
|
1951454 |
PMI weld symbol displayed incorrect after rotating the model view |
|
1952183 |
edit hole click on the position dimension causes an short pop up |
|
1955170 |
Flat pattern view cannot be edited using view dependent edit |
|
1955669 |
Only the first UDF\236s expressions in Part Navigator |
|
1956170 |
Generation of a Fixed Contour Operation not finish because of Memory Overload |
|
1956577 |
element property fields cannot properly reference expressions with zero value |
|
1957161 |
Zlevel Profile with Extended Path will gauge the part without warnings. |
|
1959657 |
User Expressions do not display in part navigator after import part |
|
1966382 |
Additional curves are not added to Flat Pattern |
|
1970195 |
"mass setting is not set" only for customer routing file |
|
1970825 |
NX changed the User Interface Style during creation of tool path |
|
1970905 |
Routing stock is not correctly orientated to device |
|
1972169 |
The problem where countersunk hole not working on bend had been fixed in NX9.0. However the changes are too big to be ported back to NX8.5 or earlier releases. |
|
1973693 |
The flat pattern feature failure had been fixed in NX9. To verify the fix, you need to create a new flat pattern or flat solid, then you will see the correct result. |
|
1974223 |
The problem you reported with NX Sheet Metal Bead dialog legend was fixed in release NX 10.0 |
|
1976648 |
Import CATIA assembly components are missing |
|
1980939 |
NC: Error in PLANAR_PROFILE leads to machine crash |
|
1981446 |
Sheet metal part cannot update |
|
1981723 |
LINUX: Impossible change the value of sketch's dimension during creation |
|
1982537 |
Problem with hide/show after edit of wave link |
|
1984128 |
Routing stock is not correctly orientated to device |
|
1984396 |
Appropriate dialog options are not displayed in certain commands |
|
1986097 |
30.0.99 Edge blend cannot be created depending on selection intent |
|
1988839 |
The problem where "Save Warning in NX7.5 is now a Save Failed message in NX8.5" is fixed in NX12 |
|
1989207 |
Unwanted dimension show up after translation with UGTO2D |
|
1990152 |
VTK15.00.236 fix. RESIZE_BLEND fails with warning and puts session into unusable |
|
1990923 |
The problem where Highlight of hidden sketches, datum planes and axes has been investigated and the following has been found. Sketch feature is very different from other features. Sketch has its own highlight code. Highlight original doesn't support sketch because sketch has its own way to highlight. It would take a significant effort and a project to support sketch. We are closing the PR as an EN. |
|
1992008 |
MacOS: Not possible to enter a value after placing a dimension |
|
2110084 |
30.0.035 Sometime we can't create Face Blends in Cylindrical Face. |
|
2113252 |
PS30.00.025 - Edge Blend creates self-intersecting face. |
|
2135139 |
PS30.0.084 - NX7.5:Modeling, Error occurs by executing "Playback" |
|
2148498 |
NX7513MT-UAF64bit-020 Error occurs by executing "Playback" |
|
2155151 |
CPJ: Extension increases after editing the spline path. |
|
2173671 |
The problem where CreatePostView{} in Advanced Simulation fails does not occur in NX 12. |
|
2180058 |
Issue is fixed in NX12.
User needs to re-create project curve feature to be able to see the new
results. |
|
2182480 |
Add doc that Pattern Feature command don't support Hole Series Feature |
|
2184505 |
CPJ: When a path is edited, a sweep body in a hidden component is displayed. |
|
2197378 |
Migratin of Spreadsheet from Xess to Excel has data loss. |
|
2207576 |
SpecificColor() method always returns false. |
|
2207722 |
Shape of the feature changes by "Features/Mark" Value. |
|
2208732 |
VTK16.00.030 fix: Face corrupts by Delete Face. |
|
2210762 |
CPJ: Stationary face of flat solid is ignored. |
|
2221665 |
Turn on option "Cut between levels" cause tool path cut through 4 levels once |
|
2223115 |
The problem "Child features of mirrored body are not displayed in PNT" is fixed in release NX12 |
|
2223317 |
CPJ: The icon of the "Linked Exterior" feature is not shows as "Non-Associative" . |
|
2223424 |
"Flat Solid" command moves the Extrude feature to one side incorrectly. |
|
2225954 |
One PMI Label from 'Model Views' disappear after exporting to JT. |
|
2228446 |
When execute "Show (Ctrl+Shift+K) command" and cancel it, hidden object is shown |
|
2229122 |
After execution of UF_MODL_create_multiple_sews() object looks like empty |
|
2230384 |
[CAD]Flat Pattern cannot be executed on the supplied part |
|
2235134 |
The result of the minimum radius is wrong |
|
2235240 |
Global Deformation Error [Unable to create body] in NX9 |
|
2235776 |
TMG flow result not matching with experimental data |
|
2235877 |
The tool path generation cannot be run with Operation Parameter Error. |
|
2237285 |
Wrong tool path is generated to the slot when Intol/Outtol is set "0.01". |
|
2238595 |
A portion of PMI custom symbol is dislocated in the exported JT |
|
2238692 |
UAF Failure(NX9.0.2.2) Update error Edge Blend(329) |
|
2239363 |
NX900_SZK_MC_Shape of model is changed by feature playback. |
|
2240986 |
Light direction of "Scene Editor" displaces from the set direction wrongly. |
|
2243131 |
[Problem]When PMI is off, [Style] is not displayed. |
|
2244213 |
[Problem]The datum CSYS of top assembly is not exported to JT. |
|
2244268 |
PS30.00.119 - NX crashes when I create a Base View |
|
2245068 |
[CAD]NX crashes when I create a Base View |
|
2245269 |
Unnecessary hidden lines are displayed. |
|
2249259 |
Error occur when use "Oriented Section" command for sphere. |
|
2249371 |
The center points of 'Center mark' and 'Radius to center' does not match |
|
2249502 |
Change to documentation of 'Draft' command (Isocline Draft) |
|
2250617 |
Assembly constraints are not sorted as per the chronological order. |
|
2250862 |
The result of Projected Distance is changed. |
|
5988838 |
PS30.00.144 Cannot create Face Blend |
|
6226020 |
VTK15.00.188 fix: Unable to move faces of disjoint body in history free mode. |
|
6267508 |
Sketch Entity Dragging not working in NX7 64Bit |
|
6290151 |
PS_PS24.1.97: NX 7.5 UAF Testing - Part fails to update in NX7.5 |
|
6290273 |
NX 7.5 UAF Testing - Part fails to update in NX7.5 but updates with no issues in |
|
6367245 |
PS30.01.046 - Blend works in I-deas but fails in NX |
|
6367252 |
Blend works in I-deas but fails in NX. |
|
6709961 |
2 1/2 axis volume based milling has slow performance |
|
6718632 |
Cursor response became poor after dragging sketch dimension in Active sketch. |
|
6720391 |
replace face will lock up NX |
|
6743101 |
IGES file give memory access violation |
|
6796354 |
external iges translation gives memory access violation in 7.5 and 8.0 |
|
6816186 |
Touch-Align constraints fail with 2 touch-aligns between a torus and a plane |
|
6824664 |
Siemens PLM believes that the problem you reported where enabling Multiple Revisions caused a Studio Spline to behave unexpectedly. will be resolved by code changes made to the upcoming release of our software NX8.5.3 and NX9.0. |
|
6881390 |
NC: Face Milling operation is violating part geometry cut regions are corrupted. |
|
6900306 |
update_cb is called when setting Formula for Expression Block in dialogShown_cb |
|
6907637 |
Deform moves body in current work part on initial placement. |
|
6926417 |
3 bend corner won't update |
|
6931375 |
Editing an offset in face produces strange results |
|
6951189 |
Linked body will not display after show component |
|
6957033 |
NX: moving a point in a sketch loses its placement in the Flat Solid |
|
6968226 |
The problem where a hidden Sketch doesn't highlight when selected in the Part Navigator has been investigated and the following has been found. This is an enhancement to a future release of NX. |
|
6971426 |
VTK14.00.018 fix: Move face is moving other unrelated faces |
|
6972020 |
SOL106:NX fails to import op2 file when STRESS request includes CBUSH1D elements |
|
6975485 |
PS30.00.078: Can't create specific face blend |
|
6981083 |
Offset in face, extend to face edges produces curve far out of tolerance |
|
7000239 |
Streamline drive method dialog groups do not remain expanded |
|
7000482 |
Cannot create offset in face curves from specific intersection |
|
7103401 |
NXOpen -> CAM -> HoleBossSetList -> Clear() - severe error |
|
7106970 |
Specify plane value set in dialogShown callback is not correct |
|
7107026 |
UF_UI_write_listing window fails after XSPAWN/UFUN from GRIP in batch mode |
|
7126403 |
WEDM op that contains geometry can be drag/dropped under another geo group |
|
7136271 |
SOL106:NX fails to import op2 file when STRESS request includes CBUSH1D elements |
|
7142436 |
TC 4GD ; NX checkout of DCE w/ SRC PRT checked out has misleading message |
|
7145668 |
Can't get forces from a pbush1d element |
|
7176352 |
Sketch displays dual dimensions |
|
7186736 |
The problem where Datum Planes and Sketches do not preview in NX9, like NX8, has been investigated and the following has been found. Sketch and Datum Plane features are very different from other features. Sketch and Datums have their own highlight code. Highlight original doesn't support Sketches and Datums and the code making it work in NX 8 caused more serious issues, so it was removed from NX. It would take a significant effort and a project to support sketch and datums in this case, so we are closing the PR as an Enhancement Request to add the capability in a future release. |
|
7199262 |
ReferenceComponent Property is always Zero |
|
7205212 |
Using Measure Bodies on Polygon Bodies give wrong max and weight. |
|
7206290 |
(PS30.0.167): NX: Attempt to thicken crashes NX |
|
7240393 |
The positions of a component differ between NX and JT2Go/TC vis |
|
7244378 |
Renaming a particular port causes NX crash with a fatal error |
|
7244818 |
NX9 Sheet Metal interprets the flat-pattern view curves incorrectly |
|
7248962 |
Please let me know about "Change of a dimension". |
|
7255047 |
Tool Preview toggle button is not memorized in the tool dialog box. |
|
7258267 |
Serious problem with Reversed Axis Direction in 3-Axis Mill-Turn (XZC) PP |
|
7281465 |
Bloated file size for simple part with Divide Face from text curves |
|
7290203 |
lathe rough-machine cycle does not place start and end of path UDE's correctly |
|
7290574 |
"Placement solutions could not be generated" when selecting an RCP |
|
7291809 |
RESIZE BEND RADIUS failed |
|
7302222 |
Beam Orientations are incorrect at the top AFEM |
|
7319543 |
UDO update callback is not always invoked for link type 1 to a fixed point |
|
7319740 |
SetDisplay() and UF_PART_set_display_part() set displayed part but menus changed |
|
7319842 |
Sections "circular - two point radius" option does not maintain settings value. |
|
7322000 |
MacOS: Not possible to enter a value after placing a dimension |
|
7322020 |
Imported part's sketch is not displayed in quick pick list |
|
7323241 |
Can Mechatronics Concept Designer work as OPC UA Client? |
|
7323822 |
Secondary Tab is not possible to create after Three Bend Corner command is used |
|
7327508 |
[View Update] occurs "too many iterations" error. |
|
7334092 |
FacetedBody.SetParameters does not retessellate |
|
7337541 |
NX: View Dependent Edit does not allow to window selection on View Break |
|
7344088 |
taggedObjectManager.get fails when remoting and using part callbacks |
|
7361248 |
PMIs during the Ordinate dimension mirror-inverted. |
|
7364251 |
Shortcut Memory In Dialogs Does Not Work As Expected |
|
7365686 |
Takes a long time to 2D Exchange-Part |
|
7365884 |
PVM 30.1 fix: NX 10 crashes when working with Delete Face/Blend |
|
7373256 |
Part Module performance |
|
7377974 |
PS30.00.068: Curve - Projection is incomplete |
|
7381843 |
Example link mentioned in "NXOpen .NET API Reference Guide" doesn't work. |
|
7383122 |
Tap Number of flutes cannot be stored in the Tool Library |
|
7384028 |
Can't export to STEP when class selecting point features |
|
7384788 |
scale feature fails on body |
|
7395516 |
The reason draft fails by the setting of edge blend. |
|
7395880 |
Rapid Dimension for diameter is cumbersome in NX9 |
|
7396233 |
Linear Sketch dimension tangent to two arcs incorrectly displayed after edit |
|
7397020 |
Selection Block is changed to un-satisfied when component is loaded |
|
7398752 |
If a component is chosen in advance, a solid body will not be displayed by Show. |
|
7398897 |
Inconsistent result of Bend Taper based on the selection side of bend |
|
7399752 |
Unable to change component's color |
|
7412241 |
Bending part is not completely converted to NX Sheetmetal |
|
7413598 |
Few MMC (Mesh Mating Conditions) has been removed on "recreate & update" |
|
7413634 |
Bending part is not completely converted to NX Sheetmetal |
|
7425890 |
Small feature tolerance causes meshing issues |
|
7429534 |
ReferenceComponent() property returns always zero |
|
7432534 |
Activate Hidden Lines in Broken View is not working |
|
7432776 |
View not displaying some edges |
|
7433718 |
Drawing always opens out of date. |
|
7441369 |
"Stitch Edge Failed" error |
|
7447798 |
Drawing is always out of date after update save and reopen |
|
7455364 |
Replacing "Populate Title Block" using Menuscript only partially works |
|
7455837 |
Regarding "applyPMIRefset " in PVTRANS config. |
|
7460745 |
The problem where two flanges could not be created with the same input data as other flanges is fixed. Please recreate those two flanges in NX 12. |
|
7463564 |
Tool component is not opening when Assembly Load Options is "Structure only" |
|
7465341 |
Trying to improve performance in Electrode Design |
|
7467213 |
Highlight of bounding object is not released after "Trim curve" operation. |
|
7467230 |
Length of the spline path is not changed & no alert is displayed |
|
7472678 |
MOM-Parameter "mom_attr_TOOL_*" will not convert to uppercase as Doc. says |
|
7475430 |
NC:Client hangs up when using multiple .NET Remote connections on different port |
|
7478217 |
TCM: Wrong Location of the Tool_Tip_Junction with Auto-Assembly |
|
7486817 |
.NET Ref Guide has broken links to Open C Ref for UFModl class methods |
|
7491932 |
Centerofmass returned by EstabPartProps & EstabPartProps1 varies with interact |
|
7495858 |
Cannot create an ordinate dim. with intersection point |
|
7498502 |
Stock gets deleted on placing a valve. |
|
7499141 |
In NX Viewer, the "Close" icon no longer closes the parts. |
|
7505247 |
Python Reference guide is not processing all doc tags |
|
7507476 |
Internal error occurs when double clicking 'Path Length Measurement' in PNT |
|
7515018 |
NX11 Beta: User Expression List in PN does not update during interactive work |
|
7517095 |
Hidden Sketches in NX10 will not display when selected as in NX8.5 |
|
7521729 |
Please let me know about "Measurement of distance". |
|
7522878 |
Spline path can't be edited and internal error occurs |
|
7525470 |
Display format default setting of history in TCNX. |
|
7526703 |
"All blend faces" multiselect is not working in Midsurface by face pairs command |
|
7527536 |
Does Excel 2013 work with NX10, and does it create an add-in "UG" |
|
7530899 |
Flat pattern view fails to have all bend lines from original body, mirror works. |
|
7536422 |
"I-deas Drafting font" of the conversion will fail. (ugfontc tool) |
|
7543601 |
PMI Heavy Section fails to update if the sketch used to create it is re-attached |
|
7544530 |
Save Failed warning in NX for modified Read-Only parts |
|
7544679 |
Menu access denied when we open the item which is not classified. |
|
7545756 |
Number of Point is not output with MCOSMOS V4.0 post. |
|
7545757 |
Post Process outputs wrong code with "MCOSMOS V4.0" (m_i -> mi_i) |
|
7546553 |
Sketcher - unpredictable results -Dragging curves with Perpendicular to String |
|
7547484 |
NXSMD : Flat Pattern is very Slow |
|
7549189 |
Cant edit three point arc via point constructor |
|
7552724 |
CAM: FROM point is not displayed.by MB1 on operation |
|
7552842 |
Error saving Postprocessor in Postbuilder > 9.0.0 |
|
7555972 |
Export VRML file colors different and components moved from the original file. |
|
7556682 |
LoadDraftingStandardBuilder does not provide current Name |
|
7556907 |
Dual Dimensions in Sketch Environment do not show up correctly. |
|
7563466 |
Import Part fails with "The attribute that does not support handles" |
|
7566534 |
Unable to set single dimension for sketch dimensions |
|
7567548 |
NX: Open Wizard for Visual Studio 2012 incorrectly creates additional VS project |
|
7567762 |
JT opened in NX is missing named groups |
|
7567852 |
Drive Path is in wrong orientation after repositioning component. |
|
7571132 |
Wrong behavior or documentation of PartCollection.FindObject() in managed mode |
|
7572533 |
Missing parts lists after dxf export / ugto2d |
|
7577950 |
IN NX --- FIle/Open JT -> Some models have the wrong scale |
|
7585913 |
Flat Pattern displays wrong sheet metal line type |
|
7585939 |
Hidden Lines of Smooth Edges (which should be invisible) are visible in DrawView |
|
7586267 |
Safe Engage move in rough turning operation does not work in NX10.0.3 |
|
7591117 |
"Load Latest" option in assembly load option is not working as expected. |
|
7592488 |
Placement of control frame on narrow dimensions does not work properly |
|
7593453 |
Search result in the "Customize" dialog shows two "perspective" menu |
|
7594651 |
View Break command is not work correctly. |
|
7595791 |
Sol601-> Bolt Pre-Load -> measure the preload of the "Force on 3D Elements" |
|
7597614 |
Add limitations of 'Offset 3D Curves' to documentation |
|
7608556 |
NXOpen.View.Scale property return wrong value of expanded view scale |
|
7609034 |
Divided faces property are exchanged with each other by Pattern Geometry. |
|
7611050 |
[CAD] About display of the "At Timestamp" of "Interpart Link Browser". |
|
7611807 |
11.2 online help with SSL fails on ports other than 443 |
|
7612029 |
NX Post processing not showing Increment 0 for any step of imported .ODB |
|
7615337 |
Performance problems when opening a drawing |
|
7616362 |
Assembly Level Datum Csys does not translate to JT |
|
7617642 |
Flow cut operations dive/gouges into part. |
|
7617899 |
Acceleration is not shown in Mechanical load summary. |
|
7618809 |
Description for a createDirection function is not sufficient |
|
7618961 |
Editing Sketch takes longer than expected |
|
7619112 |
Laminate Spreadsheet Post Report lists Ply ID instead of Layer ID |
|
7620535 |
View break gives an incorrect result after updating view |
|
7621624 |
Cannot keep the text alignment setting when copying a Note by Move Object |
|
7621626 |
Cannot keep the setting for text over stub factor in Move Object command |
|
7622945 |
ufcre User Exit doesn't evaluate modified PARAM input, see PR-1619612 |
|
7625125 |
About a copy of the group. |
|
7626146 |
NC: Unable to copy a line in member view by null tag error. |
|
7626550 |
Aesthetic face blend creates discontinuities |
|
7627866 |
[CAD] Body does not move correctly by the "Move Object". |
|
7629885 |
Documenation of NXOpen.AttributePropertiesBuilder.OperationType needs details |
|
7630649 |
"Undefined reason for exclusion" message if adding master as component to altrep |
|
7632005 |
NX10 Sheet Metal Miter Corner Erratic Behavior |
|
7632304 |
Reset not working in NCM point dialog |
|
7634094 |
The set Locked length is changed when creating another path on the same port |
|
7634100 |
Internal error occurs when trying to subdivide a length locked spline path |
|
7634143 |
unreasonable data growth just by save operation |
|
7636133 |
Datum plane fails with "Datum undefinable" error message. |
|
7636188 |
Internal error occurs when a feature is copied from NX Manager session to Native |
|
7636504 |
Model geometry is not projected in a drawing view |
|
7640695 |
Changing post processing view layout using NX Open is not possible |
|
7644491 |
View style change "Include model curve" take too much time. |
|
7644556 |
PS29.0 Fix: Unacceptable performance with working on complexer sheet metal parts |
|
7649069 |
Use Layer is different if change the Driving Method of Rapid Dimension. |
|
7649543 |
NXOpen API Help Missing Figure Images |
|
7649963 |
ugmanager_refile -set_new_dataset_owner doesn't assign Item Revision owner to JT |
|
7652119 |
Operation dialog box moves across the screen after generate |
|
7653918 |
ApplicationSwitchImmediate - all undo marks are deleted after program completes |
|
7656541 |
Section Inertia analysis is not coming out correctly |
|
7657055 |
Assembly drawing part opens as Modified |
|
7657732 |
Custom ribbon tab buttons won't get translated completely but description only |
|
7657960 |
docs for Assigning materials to part family members missing details |
|
7659694 |
[CAD]About tolerance of "Align Axis to Vector"(mothion type of Move Object). |
|
7659751 |
[TC_NX_additional_columns] and [TC_NX_additional_item_revision_columns] usage. |
|
7659782 |
Input value of the mesh control on edge is not honored on meshing. |
|
7661004 |
Dimension is displayed wrong in NX10 and retained |
|
7662950 |
NX: Blockstyler program displays temporary markers sometimes but not always. |
|
7664561 |
NX: unable to select edge after creating Bridge Transition |
|
7665195 |
When changing the locked spline length, the connector is moved |
|
7665205 |
When editing spline path, the path end tangency direction is changed |
|
7666693 |
Apply Area Fill does not show selected color |
|
7667232 |
dialogShown_cb is unexpectedly invoked at each wizard step |
|
7668680 |
Internal error occurs while trying to subdivide a path |
|
7668858 |
Cannot create smooth and constant Aesthetic face blend by chord length control |
|
7669568 |
Documentation needs to explain Base Units for internal feature evaluation |
|
7671868 |
Illustration of sketch constraints after change emphasis setting blendcolor |
|
7672048 |
Multi-line text block ValuesConcatenated does not work as documented |
|
7673026 |
NX/10 install under WINDOWS 10 fails to include version specific command prompt. |
|
7673179 |
SYS: limitation for the installation path for the SPLM DOC Server |
|
7673676 |
When open a particular Assembly drawing part, the update error occurs. |
|
7673925 |
View label disappears after changing the height of a text. |
|
7675554 |
Dimension name field overlaps with value field when dialog is not wide enough. |
|
7676844 |
Arc is displayed in Part Cleanup operation and Update Views operations. |
|
7677902 |
Redo action is getting disabled once NXOpen program is called through .men |
|
7678872 |
Axis Point location is changed to other location when Edit Parameter Move Object |
|
7679601 |
Pattern Component not working correctly |
|
7679778 |
Cannot Open an IGES file, internal error returned |
|
7684016 |
"SB Flat Solid" fails for a "SB Hem Flange" |
|
7686454 |
Imported dxf lines do not honor the edited line font |
|
7686869 |
Save Work Part Only does not remove the Modified status. |
|
7688555 |
Moving Part family spreadsheet columns does not update rows without part names |
|
7689318 |
File/Open : MONOLITHIC JT with ULP geometry : some components are wrong scaled |
|
7689678 |
CBUSH forces from sol 129 not available for post processing |
|
7691433 |
PS30.0.049:Adjacent edge does not meet to the specified tolerance in TrimExt |
|
7692316 |
Plmxml viewer does not take "ugroute_elec.cfg" from UGII_ROUTE_ELEC_KIT_DIR |
|
7692707 |
CAEConnectionBuilder::Commit() returns NULL. |
|
7694230 |
Free body gives incorrect results. |
|
7694995 |
Unintended Font Color in Post Identify using a Node-only display |
|
7696112 |
Default WebPage not shown in Application Drafting |
|
7697380 |
Unable to create chamfer dim. on threaded c/sunk hole in Exact section view |
|
7698185 |
Please teach it about Bold setting (maximum / expression) of Note. |
|
7698455 |
Render problem with high quality material wrapped image |
|
7699029 |
PS30.00.062: Invalid values observed in "Advanced Mass Properties" results |
|
7701145 |
Docs incorrectly lists datum types as supported when they aren't |
|
7702211 |
Hidden datums and sketches are not highlighting in NX9 |
|
7703213 |
Contoureflange failed |
|
7704319 |
NXMGR: Part will not ugmanager_refile without error |
|
7704472 |
Open JT files in NX has bodies scattered and some not scaled correctly. |
|
7704679 |
No documentation on the syntax for the Load_options.def file. |
|
7704901 |
LowerMetricToleranceValue() returns wrong metric lower tolerance value. |
|
7705605 |
PS30.0.162 Fix: centermark and dimension are not keeping associative |
|
7706477 |
NC: NX: Application using NX crashes on shutdown in NX 10 and not NX 9 |
|
7707268 |
NX run out of memory if license Borrowing is used. |
|
7708081 |
Threadmilling generates mismatched threads without any warning. |
|
7710315 |
reference Number attributes brakes associativity after a save as in NX Manager |
|
7710333 |
A variety of memory leaks have been addressed in the NX11 and NX12 releases. |
|
7710336 |
The width of the line is changed |
|
7710922 |
Wrong Ply strain direction when using XDB file |
|
7711105 |
Post processing superelement is not working |
|
7711239 |
Title bar shows "Inch Model" having created a new part from supplied template |
|
7711923 |
Sketch Product Interface objects are going on the work layer |
|
7712960 |
BlockStyler -> SpecifyLocation -> DisplayTemporaryPoint persistent after Cancel |
|
7713815 |
"Bend relief" on Advanced Flange does not get created with Inset Bend Outside |
|
7714816 |
Unable to import drawing into TC using ugmanager_import |
|
7714890 |
About Results of when we appended constraint. |
|
7714912 |
Point object is not created in the position of the mouse cursor. |
|
7715888 |
Unable to select an existing point in Local Radius Analysis. |
|
7716883 |
PS30.0.083 fix : [CAD]"Offset Surface" and "Thicken" does not succeed. |
|
7717909 |
PS30.00.075 fix : [CAD]Surface continuity of the mirror geometry is changed. |
|
7718034 |
'Smart Selection Options' disabled while journaling |
|
7719409 |
Memory Leak during the work with borrowed license |
|
7720333 |
Documentation lists 'Rotation Parameters' method option as Measured Feature |
|
7721512 |
Dashed line is displayed by solid line when you import DXF. |
|
7721514 |
Plotting result is different before and after updating drawing sheet. |
|
7721573 |
"Create Log File" option is not available when select "Saved in Part" in 'HD3D T |
|
7721647 |
Ribbon tab order not remembered when docked/undocked in full screen mode |
|
7722255 |
arc diameter is not maintained when Side angle exceeds a certain value |
|
7722892 |
SB Flat Solid(5) and related feature are broken when playback in NX11. |
|
7723085 |
In static wireframe displays stitch doesn't show free edges |
|
7723826 |
Poor performance opening / updating drawings and changing applications since NX8 |
|
7724361 |
Hole Making, Tapping. No error check against hole pitch vs thread pitch. |
|
7725134 |
RHL drawing view (lightweight) of faceted model is scattered, poor quality. |
|
7725896 |
update of "0D mesh" fails. |
|
7726963 |
autoNameSanitize = false is not working for JT export |
|
7727471 |
Unexpected lines appear when creating customize symbol. |
|
7727494 |
User can enter Japanese characters to String block in NX10. |
|
7728420 |
In NX > Assign Material the option "Preferred Material" is not available |
|
7728506 |
UF_MTX4_multiply doesn't give expected results |
|
7728921 |
After changing the component to "Always Suppressed" component cannot be selected |
|
7729733 |
The object in a work part cannot choose by Geometric Constraints operation. |
|
7729956 |
NX Sheet Metal wrong chamfer lines in FLAT-PATTERN |
|
7732580 |
Sketch in View documentation is outdated. |
|
7734327 |
Unable to move fabrication PMI label after creation |
|
7734677 |
False gouges detected when using "Stop when Limit Reached" toggle |
|
7735855 |
NX10 Sheet Metal unreliable interpretation of Flatpattern curves |
|
7735908 |
Sheet metal deformable part inherits sheet metal parameters of the assembly |
|
7735951 |
Extrude, The input section is not valid |
|
7736624 |
About TC_NX_Navigator_Override_NX_Load_Option. |
|
7736631 |
Applying user specified image produces many dots on face in 'Scene Editor'. |
|
7736714 |
When DXF is imported, the line font is changed to a solid line. |
|
7736770 |
not able to open assembly with NX10 was possible in NX8.5 |
|
7738134 |
Gasket thickness uses the wrong units when inserted in inch assembly |
|
7738807 |
About the position where Feature is updated. |
|
7738851 |
identify result: information or export to Excel writes wrong values |
|
7738877 |
Flange moves when attached to second flange in mixed unit assembly |
|
7740304 |
NXOpen.UF.UFAttr.GetNextUserAttribute() doesn't iterate but enters endless loop |
|
7740449 |
NXOpen.PointCollection.CreatePoint needs solid_modeling but interactive NX not |
|
7742472 |
Checkmate HD3D doesn't show visual tag for failing Coordinate System objects |
|
7742986 |
Make Simplify Assembly part of the automated Reference Set process |
|
7743723 |
Components always have got the MODIFIED flag, although saving via SAVE ALL |
|
7743787 |
A warning is generated when there is a mismatch between the pitch from the tool and the modeled feature or pitch from table value. Fixed in NX12 |
|
7744021 |
NX: Incorrect Object for this operation |
|
7747316 |
run_journal utility fails in NX Manager mode if UDO applications are loaded |
|
7748336 |
Auto Heal issues at corner of two polygon faces |
|
7748685 |
Note and Feature Control Frame does not fit in other than the Top view. |
|
7748868 |
Null tag error when creating a Studio Spline. |
|
7749071 |
stl export error - can't create facet body |
|
7749467 |
Error occurs while updating a specific drawing view in NX11. |
|
7749468 |
Error occurs while updating a specific drawing view in NX11. |
|
7749469 |
Error occurs while updating a specific drawing view in NX11. |
|
7749470 |
Error occurs while updating a specific drawing view in NX11. |
|
7749472 |
Error occurs while updating a specific drawing view in NX11. |
|
7749476 |
A part file cannot be Saved As in a specific name |
|
7750294 |
Enhance NX Help Doc for Large Assembly management to include Simplify Assembly |
|
7750968 |
NX FLOW Ref guide\\\\ mistake in Equation 5-97. Thin perforated plate screen correlation |
|
7751098 |
VTK15.00.160 fix: Synchronous modeling - delete face crashes NX to desktop |
|
7751301 |
Docs need to explain UF_SF_ask_material may create new expressions in the part |
|
7751647 |
Attached error message is displayed when I start NX and cannot start |
|
7752175 |
Siemens PLM Doc Server can be run only as root user on SLES |
|
7752648 |
Break line incorrect during ordinate dimensions and crossed lines. |
|
7753300 |
[CAD] Movement of pole is reversed to the cursor movement in X-Form |
|
7754321 |
NX: Assembly Constraints for suppressed components do not update |
|
7755261 |
No Mention of variable UGII_CGM_RASTER_ELEMENT in NX help documentation |
|
7755279 |
Performance hit saving part with Material/Textures with Save JT Data toggled ON |
|
7756009 |
Level Based IPW with instanced operations out of date after tool path generation |
|
7756080 |
NX loop on UF_ASSEM_ask_component_data in NX1002 or loading comp in NX1003 |
|
7756173 |
Partfamily master does not open in NX An embedded object cannot be deleted in is |
|
7756328 |
NX: Modifying an Exact view to be Exact (Pre-NX 8.5) |
|
7756731 |
NXOpen.UF > UFDrf > AskObjectPreferences does not returns the correct tol value |
|
7758053 |
GetFaces method/function in Python fails with confusing error |
|
7758736 |
"Out of Date" does not appear on the sheet. |
|
7759010 |
PMI angular dimension flips |
|
7759530 |
About "Element Extrude" using a polygon edge. |
|
7759780 |
Gouge in rest milling operation |
|
7759899 |
AskNumberOfFaces incorrectly reports facet count instead of face count |
|
7759930 |
Hole callouts in specification drawing are retained after save as in NXmanager |
|
7761062 |
Part is keeping modified status in NX |
|
7761104 |
Unable to open the Run Navigator because of referenced part |
|
7762803 |
Internal Error with section views/lines after upgrading to NX10 |
|
7762955 |
NXOpen.Annotations > Dimension > SetDimensionText() failing to set dual dim text |
|
7763351 |
About the preview of an angular dimension which lies on 2 views. |
|
7763481 |
NX8.5 Assembly with changed component fails to open in NX10 |
|
7764244 |
Point on curve in UDF does not update correctly |
|
7764787 |
NX8.5 Assembly fails to open in NX10 with " Access violation - no RTTI data" |
|
7765563 |
When opening 2 NX parts together getting "Internal error" |
|
7765658 |
NX 10 Postprocessing with PERMAS *.post Files error with PERMAS "TRIM6" Elements |
|
7765685 |
NX 10 Post, PERMAS *.post File opening error with Contact zero Force Elements |
|
7766542 |
Part is keeping modified status in NX because of routing object |
|
7766697 |
Unable to open NX 8.5 assembly in NX 10. |
|
7768694 |
PS30.0.017: Trim Body fails with some values for offset distance of trim plane |
|
7769212 |
PMI Security Markings do not display verbose text |
|
7769483 |
the underflow setting is not reflected |
|
7769568 |
edge->GetFaces() is very slow compared to UF-APIs |
|
7769879 |
Incorrect View when Using Exact Pre-NX8.5 Representation |
|
7770484 |
In a 4-axis WEDM Internal Trim operation the wire orientation is wrong |
|
7771022 |
Structure Weld PMI Symbols and labels of new DF object can't be moved |
|
7771358 |
Unrelated Labels are changing in the Title Block.. |
|
7771424 |
doc example says that KF feature will be forced to the bottom of the tree |
|
7772003 |
Free body results |
|
7776323 |
Quick pick order is different depending on the type of view and boundary |
|
7777662 |
"Polygon Body" is removed in Simulation navigator. |
|
7777757 |
AskElementNodalResultAllComponents() returns wrong values for Beam Resultants |
|
7779090 |
Customer default - Save dialog memory between sessions - NX5 only? |
|
7779477 |
Heavyweight PMI section cut doesn't update correctly after reorienting sketch |
|
7779739 |
Wrong default template locations mentioned in documentation |
|
7779887 |
The message is not removed even if we delete the expression. |
|
7780269 |
SUBSTR function is returning Error code 1545031. |
|
7781576 |
Partially loaded parts does not cleanup components in contrast to the doc. |
|
7781753 |
RMS stresses for external superelement are not imported correctly |
|
7782809 |
Customer Defaults cannot recognize the CDF file if its path contains blank space |
|
7782812 |
PostviewGetUserGroupGids returning NXOpen.NXException: NX error status:1 error. |
|
7783059 |
NX Weld: Bead Weld |
|
7783354 |
UF_VIEW_fit_view in fem part unexpectedly includes absolute 0,0,0 |
|
7783864 |
Offset centerlines do not maintain the gaps in the extension lines in NX9 |
|
7784438 |
Docs need info re: checkers modifying parts |
|
7784809 |
CAM- Device built in device - Pocket unavailable |
|
7785931 |
Helix command - issues with links to expression for NX 7.5 parts - not locked. |
|
7787985 |
False Status reporting on Part Module Update |
|
7788292 |
Converting Units fails with Dimensionality errors. |
|
7789150 |
Attribute reference can't delete. |
|
7789437 |
Routing takes too long to load classification using direct NX to TC integration |
|
7791529 |
Some fixture elements are not exported to PLMXML file |
|
7791976 |
Part Family Members the JT file does not get the correct ownership. |
|
7793152 |
Calling UFWave.CopyComponentAs with wrong managed part names terminates NX |
|
7793627 |
|
|
7793962 |
By entering data in the library does not keep the number of cutting Flutes |
|
7794094 |
Part Family spreadsheet shows mandatory attribute name as real name |
|
7794270 |
NX: macro is not recording "save as" steps in NX11 |
|
7795902 |
Full journal code is not getting recorded for Analysis->Shape->Concave Faces |
|
7798407 |
About the objects information that are exported as DXF. |
|
7798415 |
An oval disappears when perform 2D-exchange. |
|
7799527 |
NXOpen C++ docs for AnnotationManager::CreateAssociativeText() needs extension |
|
7799566 |
Sheet Metal SB_Unbend Command is creating incorrect curve output |
|
7799694 |
Drafting Standard Drafting_draftTextFontStyle converted to BOLD from SITE level |
|
7800486 |
Open Parasolid - Attempt to build a cyclic assembly structure |
|
7801173 |
NX Surface finish symbols: ISO 1992? |
|
7801598 |
The PLCOpen XML export does not work in the MCD |
|
7801984 |
Replace Component behavior when component is loaded or not loaded. |
|
7802272 |
Unable to keep selections checked in Visualization Performance preferences. |
|
7803283 |
Rapid Sketch Dimension button using favorite not going into edit mode |
|
7803599 |
Please teach the reason which cannot create the blend if bodies united. |
|
7804531 |
Check-Mate %do_doc documentation needs to state "formula" is not evaluated |
|
7805476 |
Replace Part is failing for a clamp multi path, single path works fine |
|
7805989 |
PS30.0.35 We cannot create [Face Blend] in Cylinder Face. |
|
7806209 |
Alert occurs when "Pattern Feature" command executed. |
|
7806228 |
NX11 Documentation installer does not set environment variable UGII_UGDOC_BASE. |
|
7806310 |
PS 30.0.031 Featuregroup selection failed |
|
7806496 |
Unspecified extra buttons appearing in custom menu |
|
7807225 |
ug_curve_mesh class fails with tangency applied to cross curves only |
|
7807880 |
Unable to adopt Through Curves feature into KF |
|
7808563 |
Extra Arc points output on a full circle move if "self intersection" toggled off |
|
7808863 |
NX10 Memory Leak in manufacturing due to borrowed licenses |
|
7808982 |
AssembliesGeneralPropertiesBuilder doesn't return any correct value of component |
|
7810987 |
Measure distance color line setting does not work correctly |
|
7811045 |
This UDF does not update child features correctly |
|
7811373 |
Flat Pattern fails on a Sheet Metal part |
|
7811431 |
UF_FLTR_auto_create_box_zones requires Advanced Assemblies license |
|
7811901 |
Save As Non-Master dialog list Item Types as the Class Names. |
|
7812257 |
The Dimension is changed to the Retain annotation. |
|
7812550 |
Table cell settings don't work if the table has more than 35 rows |
|
7812932 |
Screw Hole Series doesn’t change Thread Pitch parameter if screw size changed. |
|
7813279 |
Turning: 2D Filled IPWs incorrect for tracking points other than P9 |
|
7813350 |
"Intersection Point" of "Point" dialog does not work when "Associative" changes |
|
7814926 |
File size increase with any save operation |
|
7816069 |
Export animated Gif don't take into account "synchronized frame delay" |
|
7816504 |
Annotation Editor window very slow to show up with these customer defaults |
|
7817482 |
Fully constrained is not granted by the sketch based on the creation procedure. |
|
7817613 |
Hole-Callout does lose associativity |
|
7817936 |
Error in NX 9.0, NX 10.0 and NX 11.0 documentation |
|
7818858 |
Selection::SetSelectionStatusOfUserDefinedClass() doesn't add UDO class in NX11 |
|
7818880 |
Invalid inputs to create member identifier |
|
7820027 |
User Expression not displayed in Part Navigator when created from auto dimension |
|
7820086 |
PS30.0.039 fix.UF_MODL_ask_face_uv_minmax returns unexpected values for trimmed |
|
7821226 |
NXMGR displays error after item_id is modified in TC and Part is closed in NX |
|
7821575 |
Moldwizard parting surfaces |
|
7822420 |
NXMGR: throws repeated warning messages on Part Save after Item ID update |
|
7822469 |
Tool path preview is not displayed even if "Display" button is pressed one time. |
|
7822719 |
Views with sketch views need a second manual update |
|
7823071 |
Bridge Curve, 'Use Nearest Point on Section" setting not documented |
|
7845498 |
Display conditions of the "Work in Progress" |
|
7846022 |
NXMGR: Listing Window still displays old ItemID |
|
7846580 |
[CAD] The settings saved in a visualization scene are not applied in a new part. |
|
7847637 |
trouble getting "start part" of native mode mirrored part |
|
7848007 |
welding symbol for front edge weld is not displayed according to standard DIN |
|
7848482 |
Environment UGII_UPDATE_FAIL_OPTION setting is not working. |
|
7850048 |
The NX11 Japanese Documentation installer does not set variable UGII_UGDOC_BASE |
|
7850983 |
Internal Error is raised attempting to open an assembly. |
|
7852141 |
Editing expression raises "Null tag not allowed" error. |
|
7853644 |
Different specifications for search paths in loadoptions.def |
|
7853657 |
About [Associative Alignment] of [View Alignment]. |
|
7854128 |
MAT8 / MAT5 combination doesn't import properly |
|
7855705 |
PS30.00.183: Incomplete curve projection Along Vector in NX11, while it was ok in NX10 |
|
7856037 |
Importing part files gives error. |
|
7856433 |
NX Motion after use EXCEL trouble |
|
7857070 |
Modeler Error when editing a sketch with spline points attached. |
|
7859076 |
Non Associative Datum Wave Link doesn't remember the color |
|
7860334 |
Attribute units are invalid (not known in this part) - during save |
|
7861295 |
View Section Preferences - No Help |
|
7861804 |
There is a setting which isn't output in Spreadsheet from Customer Defaults. |
|
7862599 |
Dialog Box Width doesn't work as expected |
|
7862902 |
"Report Shortest Tool" returns "No Colliding motions were found". |
|
7863990 |
CDF file loaded is not the same favorites in NX10 as in NX9 |
|
7864645 |
Axis Parallel in Linear Path does not create lines relative to RCPs |
|
7865567 |
Ray Traced Studio stops rendering |
|
7865901 |
Linux install doc needs correction for Korn Shell requirement |
|
7867086 |
Record Movie fails if destination is drive with large amount of free space |
|
7867589 |
Unable to load NX 8.5 Assembly into NX 11 |
|
7868448 |
package file of drawing opened in ExpresReview error " Failed to open Document" |
|
7869841 |
Results Probe Copy Problem - No Data |
|
7870229 |
"Nastran OP2 Files - Sort2 Results" of GPFORCE not in xy func navigator |
|
7870574 |
Save as custom item does not list as display name in BMIDE |
|
7871883 |
Can't create detailed threads longer than 3.85 inches |
|
7872477 |
Docs need to state that stacking annotation above reverses parent/child relation |
|
7872625 |
Matrix of plane changes when using XC/YC/ZC options in Specify Plane block |
|
7873043 |
AutoJoinCurves raises NXException with unregistered error code = 3 |
|
7873363 |
Divide Face (Divide Face cannot accept a degenerate curve) |
|
7873945 |
PatternMember.GetAllComponents causes access violation with deleted components |
|
7874554 |
Measured dimension (popup) is displayed with wrong value. |
|
7875203 |
NXOpen.CAE>ResultManager>DeleteResult() is failing to unload the result in NX11 |
|
7875352 |
External and internal applications initialization conflict |
|
7876703 |
Drawing view fails update due to Hole callout referencing old component name |
|
7877236 |
Using surf152 elements with extra nodes for convection effects |
|
7877326 |
NX Option 'Change Displayed Part' is greyed out when parts are loaded in session |
|
7877372 |
Inconsistent results in Distance Measurement |
|
7878624 |
Hole Callout for Countersunk Holes do not honor the decimal values set |
|
7878783 |
cannot lengthen a detailed thread on a simple rod |
|
7879270 |
What is ScCollector? docs say only "Sc Collector" |
|
7879630 |
Export 2 Jt sticks |
|
7879783 |
NXOpen.ExpressionCollection.ImportFromFile doesn't trigger feature update alerts |
|
7880012 |
Highlight Original does not work anymore for hidden sketches and datums |
|
7880432 |
UF_MODL_validate_body returns 2 unexpectedly & docs needs more info |
|
7880788 |
Cloning Hydrostatic Pressure which belong to folder (relationship is maintained) |
|
7880811 |
Formboard conversion failure |
|
7880835 |
Associativity of Hole callouts lost upon PDF Generation |
|
7880841 |
CAM NX10 - CAM Operations Custom Dialog Memory Inconsistently Applied |
|
7880854 |
mqc_isInternalObjectToCheck() returns TRUE for Linked Exterior feature |
|
7881172 |
Extend the section of Teamcenter Integration for NX |
|
7881359 |
GetAllObjectsOnLayer unexpectedly is including faces & edges |
|
7881626 |
Documentation of NXOpen.AttributePropertiesBuilder.OperationType needs details |
|
7882063 |
Wire-edm INTERNAL_TRIM tool path is wrong - Overlap Distance causes problem |
|
7882462 |
Creating/modifying
templates explains not all |
|
7882464 |
Creating/modifying templates doesn't explain TemplateFileType and UsesMasterMode |
|
7882505 |
NX 10 Flat pattern unable to generate an Advanced Flange, NX.8.5 had no issues. |
|
7883288 |
File size greatly increases after drawing is made |
|
7883784 |
UF_ASSEM_set_work_part_quietly is deprecated in NX11 not NX5 |
|
7884115 |
Selection does not stop at intersection even if "Stop at Intersection" is "ON". |
|
7884406 |
No longer possible to perform Save as after part modified on disk |
|
7884755 |
Edit electrical components via excel ends in crash |
|
7885098 |
Custom Feature creating a curve cannot name the curve |
|
7886228 |
Plot >> TIFF file >> Image File has 127 maximum characters limit |
|
7886580 |
Cannot click OK or Apply on Measure Point |
|
7887737 |
Creating Pattern Feature gives warning about under constrained sketch |
|
7887761 |
SDI environment does not provide explanatory message |
|
7888291 |
CAM NX10 - IPW Facet Body Noise |
|
7888425 |
Component reference set that is set to empty displays geometry |
|
7888936 |
NXOpen C++ docs need to explain when to delete pointer objects |
|
7889703 |
%ui_comp_expression blocks visible on create but not on edit |
|
7890413 |
Blend edge update wrong |
|
7891622 |
NX deformable part fails raising internal error |
|
7891624 |
NX11-Simulation - Rotate-not available when results displayed |
|
7891846 |
Origin of WCS is changed wrongly by the Sketch in Task Environment. |
|
7891984 |
HH-Parser NX10 has not implemented ID240 and ID270 |
|
7892018 |
Cannot import Catia V5 CATPart file as a solid |
|
7892119 |
NX11 CGM Export fails with non-displayed sheets now but worked in NX10 |
|
7893167 |
GRIP - &DSTATE does not work in NX10, NX11 as in NX9 |
|
7893477 |
cannot select bodies to unite |
|
7893670 |
Silent installation problem for NX10 in Japanese documentation. |
|
7894708 |
Update TC Integration TDoc for UG GEOMETRY setting in Structure Manager. |
|
7895733 |
SB Dimple Parameter for Rounding |
|
7896227 |
Memory Access Error occurs with "Identify Results" (CAE Post) |
|
7896388 |
"The horizontal reference direction is normal to the sketch plane" error occurs. |
|
7896422 |
AssembliesGeneralPropertiesBuilder>SpecificTranslucency returns wrong value. |
|
7896653 |
"Change Symbol" that is not displayed on the screen is output in DXF file |
|
7897852 |
NX - Design Offset Surface Issue |
|
7898485 |
PS30.00.075 Fix: subtract feature doesn't make sense - unexpected result |
|
7898772 |
Layer of Intersection Point cannot be changed timely. |
|
7898895 |
Null tag not allowed - after part CleanUp running |
|
7899014 |
Inconsistent change of NXOpen.Update.AddToDeleteList method in NX11 |
|
7900659 |
Motion Solver Simcenter Motion does not solve multiple 3D Contacts |
|
7901081 |
NX unable to load component which is duplicated by Structure Manager. |
|
7901224 |
JPQA:Line disappears in "AUXIL@8","RIGHT@3" view in NX11. |
|
7901310 |
JPQA:Line disappears in "ORTHO@109" view in NX11. |
|
7901335 |
JPQA:Crosshatch changes in "TOP@1" view in NX11. |
|
7901342 |
JPQA:Crosshatch changes in "Top@4" view in NX11. |
|
7901350 |
JPQA:Crosshatch changes in "Top@5" view in NX11. |
|
7901417 |
Part fails for Body Consistency and Face Self-Intersection after opening |
|
7901693 |
Create Hole Table needs very long time |
|
7901790 |
Sheet Metal: Pattern of SB Bend |
|
7902194 |
JPQA:Line disappears in "ORTHO@133" view in NX11. |
|
7902433 |
Abnormal termination occurred when making angular dimensions in PMI |
|
7902856 |
Edit, transform should not allow selection of a polygon body |
|
7903386 |
The Japanese translation of "Added DFA Files" is incorrect. |
|
7903641 |
About the Behavior of "At Phase Angle" when Using "Reference Node" |
|
7904015 |
assign part numbers and attributes no longer provide assigned number feedback |
|
7904085 |
Open Assembly: Attempt to delete an object in a partially loaded file |
|
7904324 |
Hole Callouts not maintaining correct associativity when copying drawings |
|
7904638 |
[PS30.00.160]Excessive file size caused by "Divide Face" features |
|
7904694 |
Creating of Spinning Geometry works different based on settings inside deformable components |
|
7905705 |
Features.DatumAxisBuilder.SetPointAndDirection(Point, Direction) doesn't work |
|
7905747 |
Favorite of Rapid Dimension doesn't consider drafting preferences |
|
7905960 |
Different behavior in FLAT SOLID between NX10 and NX11. |
|
7906154 |
undesired breaks in Listing Window during program execution |
|
7906450 |
JPQA: Offset Face feature fails by feature replay. |
|
7906648 |
PS30.0.091 - JPQA:Edge Blend(148) feature fails to update in NX11. |
|
7907561 |
Update drawing failed, 'exact curve could not be created' |
|
7907681 |
"Datum CSYS" not available in \221Detail Filtering\222 when \221Layer Settings\222 dialog up |
|
7907824 |
Unrelated objects are highlight by "View Dependent Edit" operation. |
|
7907956 |
Dispatcher error, if we have Cyrillic item_id. |
|
7908193 |
Sheetmetal Part from NX 6 cannot be opened after changes in NX 10 and save |
|
7909703 |
VTK15.00.217: Cannot draft the faces selected. |
|
7910197 |
Sheet Metal: Doc Flat Pattern Export |
|
7910500 |
IGES translator in TC is not working consistent after upgrade to NX11 |
|
7911138 |
Copy Edit Specification limits available attributes if active spec is not None |
|
7911362 |
unable to successfully unit convert |
|
7911625 |
Local Variable In Format Of PXnn In Okuma Python Parser Doesn't Work Well |
|
7912202 |
Width (W) representation in 'Gusset' dialog mismatches with actual width |
|
7912539 |
NX does not flag missing references when Sketches are internal to a feature |
|
7913001 |
When the point on curve is moved, the sketch does not follow the point. |
|
7913561 |
NXOpen Fam.DeleteInstance() does not work correctly in managed mode |
|
7913698 |
CAM NX10 - Session Ending NX Unresponsive but No Error whilst Generating |
|
7914013 |
"PK function PK_TOPOL_facet failed" error occurs while selecting faces. |
|
7914035 |
Defined status name is displayed on Status column of ANT. |
|
7916568 |
It's not possible to project the number 8 into a face |
|
7917261 |
About grouping Automatic balloons. |
|
7917606 |
PS30.00.109: Swept Volume fails when intersecting |
|
7917802 |
NX freezes when modifying sketch curves of an SB Tab |
|
7918365 |
Splines with Bad Data raises SUSPECT939 warning. |
|
7919068 |
Break line longer than the Body edges |
|
7919324 |
ISV machine "base node" right click options are not documented |
|
7921246 |
Export error AutoCAD DXF/DWG |
|
7921534 |
When editing an extrude, unexpected sheet bodies are generated |
|
7921842 |
Docs (uf_attr.h) need to mention using UF_ATTR_init_user_attribute_iterator |
|
7922456 |
Error explanation: A dimension subscript for an array attribute was out of range |
|
7922530 |
Flat solid failed. |
|
7923285 |
No or invalid default volume error when using Clone tool |
|
7923419 |
Fanuc CSE simulation-G98 Wrong at angle |
|
7923968 |
Flat pattern failed. |
|
7923980 |
Random Exception 0xe0434352 on TC Export using UFClone callbacks |
|
7924195 |
Incorrect stock trim when placing part that extends past stock end |
|
7924445 |
The tooltip window will not display when selecting Check-Mate results |
|
7924478 |
Some Customer Defaults are missing when exporting to Spreadsheet |
|
7924533 |
The cell size of tabular note became narrow by DXF export. |
|
7924693 |
Unable to open existing Excel file if NX is killed forcefully. |
|
7925970 |
Cannot save the Boundary condition settings. |
|
7926436 |
error: the objects selected for edit have changed such that the dialog must clos |
|
7928200 |
"Invalid registration pointer for reason" to load assy with PFM |
|
7929110 |
The NX 11 command prompt is not listed on Windows 10 |
|
7929119 |
ExecuteManagedProgram fails to run Python method when passing arguments |
|
7929656 |
Dimension reference position moves by adding constraint. |
|
7931283 |
Unexpected results sets from sol 129 |
|
7931432 |
Error NX Nastran Topology error in post-processing |
|
7932095 |
Delay response at section view with specific large assemblies |
|
7932132 |
Exported Item's name is not recognize in [Export Part] dialog and TC |
|
7933749 |
Layer control gets out-of-sync for sketch lines/curves in assembly context. |
|
7933801 |
Strange layer info when working in assembly context on Projected Curve in Sketch |
|
7933806 |
Edit Dual dimension is incorrect |
|
7934407 |
Tooltip of "Edit Multiple Interpart Expressions" is wrong in Japanese NX |
|
7935501 |
output sent to ListingWindow before last SelectDevice is never shown |
|
7935764 |
Return motion is generated instead of the cut one. |
|
7936408 |
Documentation error for NXOpen::Drawings::DraftingView |
|
7936940 |
Can be moved the feature under the parents feature without any error. |
|
7936989 |
EX: AssembliesGeneralPropertiesBuilder returns incorrect values of component |
|
7937012 |
4GD Create Subset fail for property load error |
|
7937104 |
Simulation does not move correctly while simulating Planar Profile op with G41 |
|
7938088 |
NX Sheet Metal help documentation server error |
|
7938874 |
[QA] Question about the Name column value in ANT to UGPART. |
|
7939188 |
EX: AssembliesGeneralPropertiesBuilder.ReferenceComponent returns false always |
|
7939344 |
Corner Radius out of SB Drawn Cutout not usable as Expr. for UDF |
|
7940076 |
[CAD] Big difference of stiffness between primary and secondary directions. |
|
7940427 |
ugtopv: ERROR 1600 line [7183]: [UFX_MODL_ask_mass_props_3d returned error code |
|
7941185 |
NX11.0.1 - Trim Curve not working as expected |
|
7941374 |
FBM: PMI not detected in rectangular features |
|
7941545 |
ZLEVEL_PROFILE - NX loads endless |
|
7942249 |
Unsuitable OM object error when first action is reset in cylinder dialog |
|
7942351 |
Associativity manager results are different with customer defaults setting. |
|
7942395 |
The result of executing Weld Advisor command is empty |
|
7943016 |
NXMGR: Part Family Member fails to find template part |
|
7943024 |
NXMGR: Import UI Auto Assigns Part Family Member ItemId |
|
7943030 |
Color face doesn't agree between a component and assembly |
|
7943701 |
CA-Configuration - Exporting 'Sinumerik SPF' - Error |
|
7944125 |
Reattach command flips sketch arcs and dimensions |
|
7944626 |
The dialog displayed by the Trim Curve operation is different. |
|
7945066 |
Flat Pattern fails depending on selected face |
|
7945709 |
Disappearing text in PMI using custom symbol with tabular notes |
|
7945772 |
NX Motion Class Activity Issue |
|
7945810 |
Can we make a part file name in Japanese? |
|
7945944 |
NX is forcibly terminated by STL Export operation. |
|
7946283 |
Problem the translation for "Auto Size Text Fit Method Warning". |
|
7946483 |
CaePart.CaeGroups excludes groups of fem part in sim part if assyfem is used |
|
7946648 |
disable "Importable part family template" results in error |
|
7946717 |
User defined welds and automatic weld symbols |
|
7947135 |
BooleanBuilder.Tools.GetArray sometimes returns ScCollector not Body[] |
|
7947416 |
"Siemens" is not displayed in the item of Publisher in "Programs and Features". |
|
7947437 |
We cannot change the angle of the letters of Balloon symbol. |
|
7947541 |
"SOLR Port" displayed during installation is "8282". |
|
7947708 |
NX11: File-New: Preview isn't shown for drawing template |
|
7948077 |
ReplaceComponentBuilder on lowest leaf component replaces all occurrences in ASM |
|
7948842 |
a deleted or invalid class id was used while using bulk part attribute edit |
|
7949127 |
NXOpen > Sketch > Deactivate() does not deactivate the sketch appropriately. |
|
7949432 |
When Ideas ASC file is imported, curves are not created into sketch. |
|
7949433 |
Edit item id in tc, after refresh nx and close, null pointer error happened. |
|
7949521 |
Not able to select Rotation Reference to "point" only "line" |
|
7949922 |
Deformable part not deformed correctly if it contains user expressions |
|
7950521 |
Environment variable NewEnvironment1 is registered when installing help |
|
7951344 |
There is a 3MB / second Memory Leak when running in Mfg Env on a Borrowed Lic |
|
7952284 |
Turning - 'First Plunge' documentation not up to date! |
|
7952738 |
"No curve projected" Along Face Normal |
|
7953130 |
Material Attribute reset did not match material assignment |
|
7953708 |
Stiffener representation on drawing different from model |
|
7953748 |
NX freezes if multiple Fixed Curves selected in \221OmniFree Transformer\222 command. |
|
7953947 |
Part is not listing in a Tabular Note, Attribute value is out of sync |
|
7954277 |
MOTION Inconsistent results between NX9 and NX11 in measure interface |
|
7954320 |
An embedded object cannot be deleted in isolation when opening Part Family template |
|
7954330 |
NX CAM Postbuilder 10 Fanuc template post Turning cycles have no output |
|
7954835 |
Incorrect Japanese translation for "Optimize Face" |
|
7954869 |
Incorrect Japanese translation for "Styled Blend" |
|
7955088 |
Attribute Mapping - Issue with "last-release_status" on Item Rev |
|
7955281 |
NXMGR: The BVR is not checked out |
|
7955375 |
NXOpen Custom Feature samples should not involve Parasolid toolkit APIs |
|
7955769 |
Response Sim input function different than the input node response |
|
7957227 |
How to create assembly level JTs from NX through dispatcher automatically |
|
7957391 |
CAVITY MILL- tool is plunging into Blank Stock |
|
7957579 |
Assigned Shortcut Key does not work for \221Switch Window\222. |
|
7957757 |
Faces selected by \221Slope Analysis\222 are deselected if original faces are edited. |
|
7958434 |
UF function for curve-curve intersection checking creates unwanted curves |
|
7958450 |
TC Preference TC_NX_additional_columns adding duplicate empty columns to ANT |
|
7958459 |
Cannot set the name of a KinematicConfigurator in C++ |
|
7958672 |
NX11.0.1: Trim Curve is not allowed in Drafting Application |
|
7959013 |
The Ordinate Origin settings button is not displayed. |
|
7959066 |
Wrong translation to German "DAM-Umgebung" |
|
7959479 |
The offset is not displayed under Details in the Part Navigator |
|
7960257 |
The position of the advanced flange is not within the end limit planes |
|
7960333 |
[CAD]NX stops when "Custom Symbol" is updated. |
|
7960357 |
How to configure NX manager to show display name of custom release status |
|
7960654 |
Missing coloring of Electrode Manufacturing Geometry faces |
|
7960794 |
Unable to change Radius of Tangent Arc instance |
|
7960924 |
inherit weld information |
|
7962577 |
Welds are requiring Entire Part Ref Set |
|
7963014 |
UAD Failure(NX 11.0.1) Ordinate Dimension retained after update views. |
|
7963604 |
NX11 Electrode Drawing doesn't move MSET/BLANK CSYS to layer 20 anymore |
|
7963708 |
Check-Mate does not save |
|
7963779 |
F1 does not open help with update filename error: 500 Server error. |
|
7963961 |
Up-To-Date Drawing is modified after opening depends on load option |
|
7963978 |
Cannot open Catia V5 file |
|
7964001 |
drawing update is very slow |
|
7964332 |
file export part returns error and corrupts NX session |
|
7964540 |
AssembliesGeneralPropertiesBuilder doesn't return any correct value of component |
|
7964637 |
Failed to open assembly data using Partial Loading. |
|
7964820 |
memory access violation stamping output in die engineering application |
|
7964888 |
USER_RCOMP (ufrcp) omits components from global selection list in NX11 |
|
7965021 |
Save & Reopen changes some non-ASCII object names to uppercase |
|
7965346 |
NXMGR: Attributes linked to expressions broken after a "Save As New ItemType" |
|
7965483 |
Need to locate NX command prompt |
|
7965891 |
"Fix the link without joint" is translated to incorrect word in Japanese |
|
7966566 |
Problems with ordinate dimension after exporting by 2D Exchange |
|
7966730 |
NXOpen.JtCreator doesn't load/use options from ConfigFile property |
|
7968114 |
How to create Custom Feature by programming using NXOpen |
|
7968931 |
JPQA:NX9 drawing view changes after update in NX11. |
|
7969017 |
DWG export issue of Hatches in Assembly drawings |
|
7969044 |
Cannot create "Mesh Mating (Glue-Coincident)". |
|
7969316 |
NX Japanese translation of the [Extrude dialog] contains the wrong words. |
|
7969605 |
Environment Variable "FLEXLM_TIMEOUT" has to set during Installation |
|
7970092 |
Export Part using 'New' option in NX Manager is not working |
|
7970163 |
Ship Insulation will not wrap profiles with endcuts |
|
7970236 |
Associative Arc flips on Edit |
|
7970486 |
NX11 takes too much time to open drawing iges data more than NX10. |
|
7970885 |
\221Trim Curve\222 command converts Arc into Spline wrongly. |
|
7971688 |
PMI arbitrary region crosshatch not showing correctly |
|
7971863 |
Incorrect Japanese Translation for "Show Body(s) Without an Assigned Material" |
|
7972437 |
NC-Program field empty although external machine-code file is in use |
|
7973270 |
When outputting a solver input file(.inp), the axisymmetric element is inverted. |
|
7973356 |
Multiple selected Notes are not deselected after \221Customize\222 dialog is closed. |
|
7973567 |
The Tool moves down in the Operation |
|
7974160 |
NX: check-mate docs fail to load. |
|
7974323 |
Not recognizing custom Item Type in Clone or Save As New Item Type. |
|
7974427 |
Override Position constraint doesn't update after constraint was redefined |
|
7974535 |
Through face does not intersect path of the tool when creating Detailed Thread |
|
7974638 |
NX11 Save As allows user to inappropriately change revision ID |
|
7974818 |
NX session downs when UFPlot.AskDefaultCustomWidths() is called on NX11.0.1. |
|
7974940 |
We cannot update the section view. |
|
7975183 |
Unknown Error when attempting to edit with rollback or change current feature |
|
7975874 |
Exporting JT result : color gradient in legend is less accurate |
|
7976409 |
About updating section view. |
|
7976425 |
Cannot search UF_UGMGR in NX Open for .NET Reference Guide in NX11. |
|
7976442 |
Getting Fatal error when pressing OK button on Quick Pick dialog |
|
7976621 |
\223Count\224 column in \221HD3D Tools\222 shows incorrect number of logged objects. |
|
7976626 |
Getting Fatal error with Touch Panel or Touch Tablet roles |
|
7976748 |
AssembliesGeneralPropertiesBuilder.SpecificColor returns false for components |
|
7977102 |
Bevel Groove creates a bad quality center line |
|
7977804 |
No Access: Internal Memory Access Violation Error save as to new Item |
|
7977840 |
Extrude a "Spline of Trim Curve" raises "The input section is not valid". |
|
7977872 |
CreateGroup is slow when Groups are open in Part Navigator |
|
7978155 |
When install NX11 Documentation, "Solr Port" is different. |
|
7978289 |
NXOpen.UF > UFPlot > SetSessionCustomWidths returns Internal error: memory access violation |
|
7978761 |
Factory Cad library object imported in NX whose interface is in inches |
|
7978820 |
The "Find in Navigator" command doesn't work for sketches |
|
7979491 |
The problem same as PR7751647 occurs in NX11 |
|
7979703 |
ANAV UNDO: Undo causes wrong Check-in/out status shown in ANAV |
|
7980027 |
Performance degrades when Bookmarks Tool is active |
|
7992274 |
On the German interface, English terms appear in the (ANT) Assembly Constraint |
|
7992313 |
Customer Default for Basic Design does not seem to work |
|
7992507 |
CAE NX display inconsistency between US customary units model and metric results |
|
7992621 |
Incorrect styled sweep depending on where you click to select the guide curve |
|
7993149 |
[NX]0058_Sketch line cannot be selected on the section |
|
7993151 |
[NX]0059_Parallel dimension icon is not displayed on short cut tool bar |
|
7995325 |
net_ref.chm must be downloaded every time to be displayed correctly! |
|
7995399 |
Datum axis Width does not update. |
|
7995754 |
File Export Part - Internal error |
|
7995902 |
Issues when the collision checking is ON |
|
7996129 |
Cannot import STL file |
|
7997277 |
Attributes that were referenced to Annotation Notes cannot be completely deleted |
|
7997325 |
Text Profile does not stay linked to the expression value |
|
7998073 |
No syntax for def file to import dwg to drawing sheet |
|
7998160 |
Japanese Translation for UI string "Fix the link without Joint" is incorrect. |
|
7998202 |
UI "Select Edge 2" in Edge to Edge Type of Surface Continuity is not localized |
|
7998468 |
Hide option of context menu is not working in NX Line Designer module |
|
7998727 |
String Parameter in a "cycle" UDE is not possible to edit. Normal EVENT Strings are working |
|
7998840 |
Flattening and Forming problem |
|
7999445 |
NX: Unable to cut hole through both tabs |
|
7999523 |
Need ability to weld across pipe assemblies using ports |
|
7999835 |
Only "Constraints" setting does not return in "Export Simulation". |
|
8000067 |
"Inherit PMI Tolerance Features" causes view update during section line change |
|
8000199 |
NX - Drafting - Reattaching a retained Center Mark results in an error |
|
8000387 |
MW Offset Positioning doesn't show the true value and it's very confusing |
|
8000902 |
NX11 does not update datum plane at correct distance |
|
8000912 |
Select Part from List block loses selection on Next/Back of Wizard |
|
8000919 |
Unable to create a Face Blend |
|
8000926 |
error occurred when updating hidden line display |
|
8001666 |
Reuse Library: Component Name is wrong |
|
8001755 |
Reuse Library management, problem with a library assembly and Load Options |
|
8002359 |
JT conversion problem |
|
8002931 |
CMM: "Tip type" returns to "automatic". |
|
8003373 |
SamCef embedded in NX11.0.1 aborts before writing .res file |
|
8003465 |
vertical/horizontal limits for scallop height stepover control cause memory leak |
|
8003770 |
Unable map User ID for Signoff. |
|
8003988 |
bolted connection fails with coincident and coaxial holes |
|
8004144 |
Shaded view is plotted wireframes and missing edges |
|
8004237 |
NXMGR: Some attributes mapped to Workflow missing in NX 11.0.1x |
|
8004748 |
Partially Shaded View in modeling not showing all bodies |
|
8005714 |
Adding detail view is changing drawing border note fonts |
|
8005929 |
"Maintain Helix Handedness" of Mirror Feature does not work. |
|
8006037 |
Safety Factor on Stress Wizard |
|
8006177 |
UF_UI_set_dialog_directory doesn't work for 'Save Bookmark' initially |
|
8006487 |
Create new arrangement results in Internal Error with Enable Multiple Revisions |
|
8006761 |
Pattern Features with sketches and continuous auto dimensioning regression |
|
8006895 |
LD: can't delete connectors |
|
8007510 |
NX 10 Gouge issue |
|
8007612 |
Edge lengths are different after executing Flattening. |
|
8007755 |
Non make work part component display is strange. |
|
8008264 |
Mold Wizard NX11 is slower to edit Moldbase configuration |
|
8008821 |
Overlap "Diameter Symbol" and "Dimension Value" during dxf translation |
|
8008833 |
BugHunt(NX 11.0.2ip3) The "2D Component Library" set in customer default, will not be displayed in the Reuse Library Management dialog |
|
8251871 |
PS30.0.069 Fix: Feature update becomes very slow due to later subtract |
|
8253751 |
Internal Error when selecting point on curve for spline path |
|
8254337 |
Spline path is not constrained when using option Lock to selected objects |
|
8263265 |
TAP tool missing FN in tool_databas.dat. |
|
8265652 |
Closed Corner faces become B-Surfaces instead of Planar faces when using Miter |
|
8266232 |
NC: NXOpen Signing tools still need error checking for API type |
|
8269298 |
In the Upper Roof Selection Wizard of the function Head Impact the correct required component should be the front and rear in X direction outermost edge of the roof interior instead of the windshield trim |
|
8269862 |
Memory is full |
|
8270543 |
Unable to create Three Bend Corner -> "Cannot create feature body" |
|
8272437 |
PartModule DatumAxis only Within Active PartModule |
|
8273777 |
PR : NX is not able to read *.op2 from SOL 159 |
|
8275296 |
Too Small Tet-Elements on planar face |
|
8277455 |
CAM: FlowCut Single UI opened-closed state lost |
|
8280743 |
PS30.00.74 Fixed-Subtract fails with intersecting bodies |
|
8283949 |
FTL - Spline Path Loss Of Tangency Settings Defined By User On Modification |
|
8284691 |
This JT file has unknown length units when opening Monolithic JT |
|
8285500 |
Multiple Pattern Component give Error if to use Cyrillic Item ID |
|
8285781 |
NXOpen.Preferences.LoadDraftingStandardBuilder.Name doesn't return value |
|
8292728 |
Stress in beam calculated from element force by NX provide small values. |
|
8293137 |
Standard Part Assembly Constraints have invalid RM references to components |
|
8295947 |
Defining origin/orientation for custom reuse library parts for Fastener Assembly |
|
8297211 |
Wrong result from WCS Orient inferred with CSYS of moved components |
|
8297994 |
NX9 : Update all views does not update all views. |
|
8298376 |
Command Finder only finds custom commands from *.men menuscript files |
|
8298421 |
Hidden Sketches in NX10 will not display when selected as in NX8.5 |
|
8298476 |
Only nodes have been imported (with load activated). |
|
8300428 |
mom_from_status variable has undocumented value |
|
8301373 |
NX - Update Part Family update with Assign in column skips next Rev |
|
8302771 |
Contextual help not mapped for "Create Graph" command in Command finder help |
|
8303121 |
Snap.UI.Selection.Result.PickPoint fails with InvalidOperationException |
|
8305877 |
2D _mapped mesh element size is not saved if units = meter |
|
8306767 |
Missing popup in Nx10 Part Families management for Verify Part and Apply Values |
|
8306864 |
NX SAMCEF: Spot weld with Beam |
|
8307283 |
Open C++ Matrix3 constructor creates wrong matrix with ZX_Input |
|
8307669 |
Part family spreadsheet seems corrupted |
|
8308512 |
Error when trimming: Through face does not intersect path of tool |
|
8309290 |
NX10 Confusion about deprecated API UF_UGMGR_reg_new_part_no |
|
8309415 |
Error when using envelope with specific settings. |
|
8309420 |
Problem of performance for envelope |
|
8310205 |
Dimension creation fails after changing snap point settings |
|
8310990 |
PS30.0:Rebuild of Face Blend Fails - Door Inner Panel |
|
8311107 |
Sheet Bodies needs Surface Normal reversible |
|
8311418 |
Trim of an Intersection Curve fails |
|
8311502 |
Extrude of Sketch with Spline Error -Wrong Geometry Representation |
|
8311610 |
Sketch - Intersection Curve different behavior between Fillet and Corner |
|
8311784 |
Symbol "GAP 125" missing in angular dimension line coming from NX9 |
|
8311907 |
Faceting Error |
|
8311908 |
Width setting affects Arial Unicode MS TTF appearance for drafting symbols |
|
8312216 |
Results combination: incorrect results for Native CSYS. |
|
8312318 |
Assembly Sequence - Internal Error Message while using Extraction |
|
8312530 |
Helix command, issues with links to expression Turn option: drop down missing |
|
8313705 |
Failure for context sensitive Help on sketcher for existing sketches |
|
8314146 |
Change Window to Drawing with TIF let RAM raises |
|
8314372 |
uc4620 reads wrong switch caused by ambiguous first character match |
|
8314685 |
LawExtension: Selfintersection although there is visible no intersection |
|
8314751 |
PS30.0.022:Draft is failing at 0.00001 offset dist. of the parting plane created |
|
8314899 |
Minimum Simulation Time equals zero |
|
8315483 |
Through Curve Mesh: Edges exceeding specified tolerance |
|
8315647 |
NXOpen.Validate.RequirementBuilder.Formula returns empty strings |
|
8315657 |
NXOpen.Validate.RequirementCollection is empty unless opening HD3D palette |
|
8316757 |
post-processing/identify/output -> excel/new excel process created each time... |
|
8317216 |
Using as first object the NX Facet Body or JT Facet, user cannot select a face or line as second object |
|
8317564 |
PS30.00.052 Fix: "Aero Rib" command gets segmentation |
|
8317572 |
"Blend pocket" command processes not all ribs |
|
8317783 |
Inherited PMI do not keep orientation |
|
8318046 |
Windshield Vision Zones are not correctly created |
|
8318059 |
Link to NX Open Programmer's Guide failed. |
|
8318099 |
DatabaseAttributeManager.LoadAttributesRecursively fails with 650004 error |
|
8318224 |
Command Finder finds "Load Role" at wrong (old) place |
|
8318470 |
RAMSIS in NX: Selection filter for UDO Elements not working/available |
|
8318634 |
Different Results in same position |
|
8319466 |
UI bug in FEA Pre/Post application when loaded via custom interface |
|
8319610 |
Part is non_geom in spite of TC_NX_Unit_Of_Measure_As_Geometric_List |
|
8319645 |
Draft Possible only after splitting the body |
|
8319855 |
ALT key not working for horizontal and vertical Alignment infer constraints. |
|
8319860 |
Adding comment to expression by using // |
|
8320056 |
PS 30.0.147 fix: Variable Offset Face fails with specific region boundary |
|
8320248 |
PS30.0.176: Provide solution of draft body matching if repair not possible but on |
|
8320529 |
Renew Feature on Unite(1712) fails with NX11.0.1.8 which is a regression problem |
|
8320740 |
object Components are missing in the XY Viewer in relative with Simcenter solver |
|
8321353 |
Update of embedded XTJT Brep JTs fails |
|
8321637 |
Insert of a Deo-Feature takes a long time if a Part Navigator Filter is active |
|
8322151 |
Open C Reference Guide UF_UGMGR is missing links to sample codes in NX11 |
|
8322268 |
Using tkinter with external Python distribution fails with 'argv' AttributeError |
|
8322608 |
NX Assembly open in NX 10.0.2 but fails in NX 10.0.3 and above |
|
8323081 |
Wrong translation of "Pitch" in German callout dimension menu to "Vorschub" |
|
8323363 |
Set Rotation Reference not available in Command Finder |
|
8323520 |
Generated STL cannot be imported again |
|
8323595 |
Command Flattening and Forming deliver the wrong result |
|
8323718 |
It is not possible to paste a feature if the body belonging to this feature ha |
|
8323725 |
Excel process remains running after update from spreadsheet |
|
8323770 |
'pload4' deck entries are not imported into nx |
|
8323827 |
Umlauts cause all caps in feature name after part save |
|
8323994 |
New NX11 NXOpen::STLCreator class is missing Docs and Journal Indicator |
|
8324027 |
Problem with Rigid-Flexible Contact with friction. |
|
8324063 |
Copy / Paste takes too long |
|
8324093 |
"Has Position" column in pending components dialog always says "yes" |
|
8324855 |
Sketch Project Curve: "Mixed selection of points and curves is not supported" |
|
8325107 |
Make Sketch command Project Curve the same as 3D command Project Curve |
|
8325326 |
Deviation Gauge: The deviation does not have the same direction |
|
8325671 |
Update To End needs a long time |
|
8325787 |
PS30.00.127:Update to End(without any geometry modification) causes geometry deviation |
|
8325931 |
Contents tab of NXOpen .NET API User Function Reference is mixed up |
|
8326129 |
Deleting a feature, which is no longer required for the further design, takes too long |
|
8326404 |
Paste CSYS definition of the needed parents not clear enough. |
|
8326455 |
Wrong Region Status Update for Abaqus Solutions after a geometric modification |
|
8326476 |
Paste Feature, in parent definition for CSYS are double spaces, information |
|
8326597 |
Variable edge blend works only, if the basic surface is created by face blend. |
|
8326602 |
Unstable Display of User Expressions in Part Navigator |
|
8326844 |
measure distance between solid and convergent bodies does not update |
|
8327096 |
Symmetry Plane BC error |
|
8328085 |
incorrect 'finish' deck entry when exporting thermal transient analysis to ansys input deck |
|
8328940 |
NX11 - Incorrect handling of Cutter Compensation in OOTB FANUC post |
|
8328980 |
Hole_Table_cannot_be_referenced_to_3D_Sketch_Curves |
|
8329321 |
NXOpen.Options.OptionsManager is missing the Customer Default Scope |
|
8329456 |
Problems importing simulation into TC |
|
8329620 |
PS30.0.182:Extend Sheet has different behavior with a mirror-based geometry |
|
8329739 |
Section Surface too long |
|
8329912 |
NX11.0.1: Trim Curve is not allowed in Drafting application |
|
8329972 |
Trim Curve doesn't work in this mp (regression) |
|
8330479 |
MRL: Mapping for Auto-Assembly in NX11.0.1 does not work for CAM_TOOL_ATT |
|
8330622 |
ISO1302 (2002) Secondary Roughness use the wrong list for menu input |
|
8330668 |
exp() function and units |
|
8330885 |
PP-Output is incorrect with variable UGII_CAM_PTP_SUPPORT_CHAMFER_MILL |
|
8331218 |
Assembly - Add Component error |
|
8331802 |
Persistent frozen wave linked bodies update unexpectedly |
|
8332167 |
G76 is calling G74 - Okuma controller |
|
8332169 |
G4 - floating point - error - Okuma controller |
|
8333122 |
Swept with Orientation Method Face Normals produce Distortions |
|
8333127 |
Modeling Preferences Optimize Curve activated produce erroneous results |
|
8333129 |
Swept with Orientation Method Another Curve produce Distortions |
|
8333422 |
Curve Analysis- Multi Curve Measures incorrect |
|
8333561 |
Pattern_Geometry_Examine_Geometry_Fault |
|
8333893 |
Indexed Expression Value is getting changed when an expression in same category |
|
8333927 |
Error when adding similar attribute as existing array attribute with suffix "_1" |
|
8333966 |
Export GEO flat pattern issue with bend angle 180 deg. |
|
8334211 |
Memory increase and performance slowdown while creating new mesh (1d connection) |
|
8334258 |
Closed Corner fails from imported SE part |
|
8334589 |
Orthotropic material orientation lost after import. [TFPR-1362] |
|
8334605 |
Cannot append material with 2 dependencies (temp-pressure) [TFPR-2297] |
|
8334717 |
[PS30.0.196] Thicken fails with specific offset values |
|
8334726 |
[PS30.0.196(Patch 2)]Cannot apply Thicken |
|
8334756 |
Flattening and Forming does not work correctly |
|
8334776 |
Fill Surface Out of tolerance edges |
|
8335159 |
Questionable log file information during Mesh update |
|
8335190 |
Break-out Section View, background parts missing. |
|
8335282 |
NX12 Beta: ErrorMessage raised on opening assembly "Attempt to delete an object ..." |
|
8335447 |
Sketch becomes under constrained (warning) during mirror thread by PMI |
|
8335540 |
Unable to create a Contour Flange |
|
8335609 |
NXPOST: Wrong arrow direction for CGAP Element Force |
|
8335662 |
Edit reusable Component - primary Parameters did not change if selected |
|
8335784 |
Abaqus: Issue with rotational acc. loads: only positive acc. will be translated |
|
8335791 |
Extrusion doesn't work when we use "ply extensions" |
|
8335813 |
NX hangs when processing an ABAQUS input file |
|
8336024 |
Use a "face from mesh" as "Face of Solid" to define a Beam Section. |
|
8336416 |
Hole Callout on cylindrical face not changing position when hole is changed |
|
8336718 |
Issue with Parent-Child relationship of a Boolean feature and its corresponding tool bodies |
|
8337030 |
Some free edges not visible |
|
8337053 |
No longer possible to change reference set of Non-Geometric parts to Empty |
|
8337451 |
'mesh collector, edit display, element shrink' modifies mesh display color |
|
8337478 |
'simulation navigator, color column' does not show the correct mesh color |
|
8337625 |
custom mesh color not retained when a mesh is dragged to a different collector |
|
8338161 |
Inconsistent sketch dimension |
|
8338983 |
Resultant 2d mesh is incorrect |
|
8339059 |
Mirror Parts with PMIs Number Type Attributes Error |
|
8339079 |
Thicken sequence is changed after moving the split object (Ex: CSYS) to higher value |
|
8339092 |
SUSPECT939 warning while loading drawing |
|
8339125 |
Mesh properties lost during Abaqus export. |
|
8339475 |
Edit with Rollback - Long time until Feature Dialog appears |
|
8339495 |
Bracket issue during XML creation |
|
8339568 |
Internal Error on create Electrode Drawing as Master Model. |
|
8339717 |
Incorrect layer allocation after an update |
|
8339926 |
samcef export options are not stored from session to session |
|
8340205 |
Wrong error message when creating attribute from expression with wrong data type |
|
8340223 |
view alignment does not operate correct |
|
8340309 |
Deviation Gauge count down Objects To Compare |
|
8340480 |
coupled-transient according a mission profile produces warnings |
|
8340731 |
Memory Access Violation of linked Sketch in PTS |
|
8340937 |
Crash NX when stacking Custom Symbol |
|
8341064 |
Assembly Clone unable to clone Motion dataset |
|
8341269 |
PFM creation doesn't work with custom attribute in NX 10 but worked with NX 9 |
|
8341395 |
UFAssem.InitDeformPartData fails with RuntimeBinderException in NX11.0.1 |
|
8341444 |
CSYS Global Shaping |
|
8341445 |
Selection Intent in Studio Surface is not retained |
|
8341745 |
Physical properties lost during Abaqus import. |
|
8341752 |
Sheet Metal part is not rebending properly |
|
8341787 |
Help Documentation on Simplify Body Command incorrect |
|
8342622 |
Composites - laminate inflation/extrude laminate - incorrect analysis results... |
|
8342848 |
i_deas tmg '.unv' file import fails if boundary condition group includes nodes |
|
8342952 |
Memory Access Violation Error after loading Part |
|
8343032 |
Evaluation peak strain - result: no valid node found |
|
8343125 |
NXOpen API References inconsistent with "Obsolete" API notes |
|
8343183 |
PS30.00.051 Fix: Boolean Unite does not work for default tolerance of 0.01 |
|
8343229 |
Not able to Switch to Modeling Application |
|
8343391 |
Part Cleanup "Clean Drafting Objects" on an assembly fails. |
|
8343419 |
Add base view (flat pattern) failed |
|
8343652 |
Data cannot be opened with NX! |
|
8343667 |
NX crashes when opening a part file which was last saved in NX 10.0.1.4 D4, 27M |
|
8344021 |
NC: VDA/Crash Barrier: Transformations in assembly context ignored |
|
8344166 |
Help for pattern face is not loading correctly o F1 |
|
8345970 |
NX/TCUA : Edit parameters on Wave links takes over 30 minutes |
|
8346276 |
Flat pattern problem in drawing view of master model |
|
8346446 |
NX/TCUA : Performance problem with Wave Interface linker |
|
8346447 |
NX/TCUA : Double Click on Wave links takes over 20 minutes |
|
8346550 |
Open component fully is not possible, Encountered unexpected NULL pointer |
|
8347182 |
Order of weld points change during edit |
|
8347651 |
Internal error using static joint friction |
|
8348256 |
SaveAs Non-master does not offer to close the Non-master anymore. |
|
8348651 |
CustomFeature callbacks requires to be loaded from 'application' folder only |
|
8504531 |
PSB 30.0 fix: Optimize face changes the model. |
|
8507614 |
When exporting 2D to dwg, translated Partlists is different from original. |
|
8512498 |
Cannot avoid plunge motions anyway with Min Ramp Length == 70%Tool_D in Zlevel |
|
8514931 |
NX does not create a mapped mesh correctly on a spherical surface. |
|
8517183 |
NX does not export correctly a value of a component force to the JT file. |
|
8517200 |
Non-geometric component is retained in cloned assembly by Create Clone Assembly |
|
8524531 |
The new Links folder in PNT does not works in Chinese NX11 |
|
8524615 |
cavity mill path with "top off critical depths" does not remove all material |
|
8525541 |
Samsung: "Exceptions were encountered" occurs while performing Clearance analysis |
|
8525542 |
Samsung-"Through face does not intersect path of the tool." in Trim body |
|
8525886 |
PS30.0.41: Body turns invisible when convert to convergent body. |
|
8526557 |
Pattern feature error "sketch becomes under constrained due to edit" |
|
8527073 |
We got "Nastran Model Setup Check error" with Model Setup. |
|
8529821 |
Value is still doubled when we change back the reference dimension to driving. |
|
8530709 |
Result of Slope Analysis is not updated when reverse direction of vector is used |
|
8530711 |
Fanuc CSE simulation G43 Wrong with G68 |
|
8530712 |
Fanuc CSE simulation-G28 Retract Overtravel X |
|
8530958 |
Inconsistent results of draft analysis when the angle of faces = limit angle |
|
8531151 |
"Use Drawing Sheet Widths" information is not updated in the NX documentation. |
|
8531363 |
Sketch on face is listed in application list. |
|
8531402 |
direct traverse moves gouge the part |
|
8532995 |
30.0.211 The result of "Trim body" is not correct. |
|
8533508 |
Unable to show hidden components in Sketch mode. |
|
8533707 |
Weld symbol size factor is not applied correctly to weld reference tail |
|
8534486 |
A specific DFA file cannot be imported with tcin_import.exe |
|
8534616 |
PS30.00.214 A part of Target body disappears after trim body. |
|
8534857 |
unable
to translate dxfdwg file for simcenter |
|
8535659 |
The die design setting does not update the clearance in cavity and slog hole |
|
8537511 |
Cannot edit sketched features copied to 3D |
|
8537924 |
level-based IPW cause the wrong tool paths |
|
8538212 |
With "Make unique" option in NX11 Non-master is not created. |
|
8538966 |
Help for "spine curve" command not displayed. |
|
8709569 |
Watermark got smaller in NX9 |
|
8711219 |
Sketch on-screen input boxes for MAC |
|
8711775 |
Non Consistent Avoidance Non Cutting Moves |
|
8711874 |
The collision is not reported using Replay mode |
|
8713305 |
Error while performing static equilibrium analysis |
|
8713867 |
Export of JT does not create complete files |
|
8714769 |
Stress Wizard cannot be accessed from the Gateway application |
|
8800416 |
Missing alert when Datum CSYS for Sketch have been deleted |
|
8801488 |
Toolpath Simulation - Incorrect collision |
|
8801765 |
NX not opening AutoCAD drawings correctly 3D geometry not represented in drawing |
|
8801864 |
Sheet Metal: FlatPattern Curve on wrong layer after adding an additional flange |
|
8801915 |
Check-Mate classes and functions quick reference link is broken in online documentation |
|
8802025 |
Move sketch curve entities of a custom symbol, NX crashes |
|
8802532 |
Contour Profile - Internal Error: Memory access violation |
|
8802599 |
When right clicking on the existing constraint or object it is considered as selected |
|
8802794 |
Cannot import STL Data with error "Parsing error in file". |
|
8802971 |
About the solution types supporting the Mooney-Rivlin materials. |
|
8803367 |
Shaded drawing views shown as wireframe when exported to PDF file |
|
8804457 |
NX session downs when UFPlot.AskDefaultCustomWidths() is called on NX11.0.1 |
|
8804467 |
NXOpen.UF > UFPlot > SetSessionCustomWidths returns Internal error |
|
8804697 |
Using borrowed license induces RAM leakage in CAM sessions |
|
8804881 |
UFCgm.AskSessionCustomColors terminates NX11.0.1 (MP1) |
|
8805070 |
Plotting Grid Point Forces - no data for a transient plot across iterations |
|
8805183 |
SaveAs Non master dialog does not pops up during Save As |
|
8805416 |
Load Interpart Data does not report failures |
|
8805717 |
Error in Post processing of Topology optimization analysis |
|
8806734 |
IPE's have been broken for unknown reasons |
|
8807866 |
Geometry optimization converges to an incorrect result. |
|
8808130 |
NX: Memory Leak when borrowing a license. |
|
8808377 |
Operation status is repost when clearance plane has changed |
|
8808597 |
NX Online Help Correction Request |
|
8808678 |
Can't do [Check Wall Thickness] with Internal error "memory access violation". |
|
8809445 |
NX9 Clinch weld point and custom weld point not published in NX11 in legacy mode |
|
8809601 |
Intersection Point defined inside sketcher doesn't travel along with sketch |
|
8809848 |
Cannot add the Tab Page using "BLock UI Styler" in UGII_LANG=japanese. |
|
8810094 |
Specific shape is moved when [Flat Solid] is executed. |
|
8810466 |
Modeling preferences not saved with part file |
|
8810653 |
Incorrect tool position when simulating grooving tool with 90 degree holder |
|
8810884 |
Sketch on rigid body destroy joints attached on rigid body |
|
8811406 |
Tool path is not getting displayed in NX11.0.1 by calling GENPTH Grip function |
|
8811550 |
NXOpen Python: wrapped UF functions in second source file fail |
|
8812609 |
Display Problem on Switch Window command |
|
8812713 |
Slope Analysis, Reverse Direction function fails to work NX11.0.1. |
|
8812929 |
NXOpen Python Custom Feature: Documentation problems |
|
8813247 |
In some cases, it may not be hidden by "Hide Components In View" command. |
|
8813562 |
NXOpen.NXObject.GetUserAttributeAsString returns null rather than empty string |
|
8813682 |
Moldwizard Cooling Component Design doesn't flip components |
|
8814840 |
Multiple Coordinate systems with symmetric constraint |
|
8815398 |
Switch from Exact to Lightweight shows body not used in Ref Set |
|
8816465 |
Classification Attributes will not be mapped to NX since the upgrade to NX11 |
|
8816617 |
Unable to add a flat pattern view, for parts with components. |
|
8816633 |
Attributes on Item IMF and IRMF set in UGMASTER are locked in UGPART |
|
8817179 |
Generated DXF File contains wrong definition for GD&T Symbols |
|
8818291 |
TC_NX_nonps_occurence gets created during cloning |
|
8818526 |
How to use the selection filter "Bodies in Group" in Wave Geometry Linker. |
|
8818675 |
SaveAs Non master dialog does not pops up during Save As |
|
8818692 |
Cannot change associative point to a non-associative point. |
|
8818945 |
Ship Section tool is not trimming ship body. |
|
8819515 |
Deactivation "Check Tool above Ball" causes displaced tool path |
|
8819540 |
Patch command joins target body faces |
|
8819830 |
Cavity Mill: Tool gouges Part geometry |
|
8819989 |
Smart Light weight view cannot dimension radii |
|
8820023 |
The part has mismatched unit-of-measure between Teamcenter_NX |
|
8820025 |
Information message pops up when using NXOpen.CAE.CAEConnectionBuilder |
|
8820889 |
Menu File Format: wrong syntax for BITMAP (typo: BIMAP) in online help |
|
8821466 |
We have questions about [Smoothing Factor] of [Global Deformation] command. |
|
8821681 |
Tab Control block of Block UI Styler has problem in Japanese NX. |
|
8821743 |
Active Tab Page cannot change correctly in Block UI Styler dialog. |
|
8821918 |
detail view leader is not point to the center of the view as in NX 8.5 |
|
8821959 |
Results Probe does not correctly identify divide by zero case |
|
8822279 |
Loss of data due to significant figures displayed in dialogue box |
|
8822460 |
NX11.0.1 - tool does not display when setting tool axis as interpolate vector |
|
8822620 |
Error while creating a Post Processor with "service" inside the pathname |
|
8822658 |
Internal error while drag & drop comp in Assembly Navigator. |
|
8822785 |
Sketch dimension are selected when picking section curves for extrude/revolve |
|
8823669 |
NX 8 GRIP FMPOS Command does not work in NX 11 |
|
8823818 |
Teamcenter fails to create the proper revision when creating from a Family table |
|
8823895 |
[CAD]The position information of the exported STEP file is incorrect. |
|
8824143 |
error: memory access violation when accessing Solution Samcef menu (right click) |
|
8824485 |
Request RMS tensor stress but results are scalar |
|
8824782 |
"Inherit PMI Tracking" - Not possible to change options after saving DWG to TC |
|
8824834 |
Family instance: SaveAs different filetype silently modifies the original part |
|
8824872 |
Face Blend fails in NX11 where is works in NX9 |
|
8824925 |
helical milling a stepped bore with fixed contour operation violates the part |
|
8825518 |
Save as IPW part file with machine code simulate is empty |
|
8825772 |
Tooling Manufacturing Geometry UI hangs up and NX needs to be terminated |
|
8826360 |
PS30.00.174 fix. Offset surface fails in NX11 where it worked in NX9 |
|
8826681 |
|
|
8826947 |
NXMGR: CGM is incorrectly attached to model instead of drawing dataset |
|
8827285 |
A Catalog value which should not display is displayed in information window. |
|
8827573 |
About the graph of MAXIMUM TEMPERATURE CHANGE. |
|
8827596 |
Problem in CAE preparation |
|
8827951 |
PS30.00.174 fix. Offset Surface fails with a value 46mm, works with 45mm and 47mm |
|
8828264 |
User defined symbols are not displayed correctly in NX11 view |
|
8828314 |
'Rules' folder is missing in NX11 |
|
8828959 |
Editing Sketch with Roll-Back and not making any changes causes update |
|
8829024 |
NX: Invert Selection behavior in the Hide function inconsistent |
|
8829086 |
Gouge Checker not working properly for certain programs. |
|
8829245 |
mom_next_oper_has_tool_change is not correct if optimized groups are used |
|
8829553 |
Changing Analysis units with gwif displayed updates units but not the value |
|
8829640 |
Import of LS-Dyna Mat054/055 does not populate NX Pre-Post material correctly |
|
8829885 |
MRL: Performance Problem Tool search in NX-CAM |
|
8830032 |
Multiple coordinate system of symmetric constraint |
|
8830086 |
Problem that Incorrect data is created if pressure is set on pyramid element. |
|
8830142 |
Problem that the pressure set on the pyramid element is not imported correctly. |
|
8830162 |
In NX Drafting: Section View Letter Disappears after updating the view |
|
8830457 |
Failure With New Trim Curve - Swept fails update after Replace operation |
|
8830542 |
Wrong translation in German user interface |
|
8830708 |
Synch linked mirror body not reported out of date |
|
8830863 |
Unable to Update or Verify Part Family members |
|
8831165 |
"Create Clone Assembly" fails when I execute this command to Sim Item. |
|
8831434 |
NX12 Beta: All instances of a created pattern feature have a warning |
|
8831473 |
Beta-Error occurred when updating view bounds |
|
8831627 |
Cannot create Edge Blend due to differences in target body selection of Unite. |
|
8831664 |
BETA-Break by Ordinate Dimension work not correct |
|
8831811 |
Encountered unexpected Null pointer during open part |
|
8832014 |
Selection of Non-Sectioned Objects fails in Section View |
|
8832113 |
Simulation Machine does not display tool in Variable Streamline Interpolate vector |
|
8832744 |
Internal error occurs when changing the assembly structure. |
|
8832921 |
BETA: Assembly Navigator "Constraints" collector name not localized |
|
8833592 |
Solid Profile 3D ignores custom data stock values on part geometry |
|
8833679 |
Unchecking "Inherit PMI Tracking" will not be honored |
|
8833743 |
Issue reverting to value angle option when creating datum plane |
|
8834417 |
Cross hatch will not follow. |
|
8834829 |
not possible to save changes in Inherit PMI Tracking in managed mode |
|
8835118 |
component opens modified when no work was done |
|
8835526 |
Save As Non-master Parts Dialog Box Does not appear |
|
8835721 |
NX11.0.1 - issues when batch exporting with external dxf/dwg translator |
|
8836078 |
copying material from one fem to another |
|
8836330 |
graph of cbush forces vs load factor in 106 |
|
8836671 |
NX drafting - view break causes several errors (1) |
|
8837167 |
Checkmate PMI GD&T Syntactic Validity Fails on Composite FCF |
|
8837291 |
Can't update flat solid in NX11 works fine in NX10 |
|
8837567 |
two spring-dashpot resultant results from sol106 |
|
8837634 |
General Relinker fails when source is set to Parts In Assembly |
|
8838259 |
Incorrect IPW generation when simulating machine code file |
|
8838263 |
it's no longer possible to get tracking points via user function |
|
8838976 |
When changing a linked expression path, the change is not reflected in the PNT |
|
8839483 |
Contour Flange: Fails on lines on opposite side of an arc |
|
8839520 |
Null Pointer Exception While Open Part in Teamcenter |
|
8839845 |
tcin_import error pops up, but it is only a warning |
|
8840227 |
NX9 Motion Analysis - Mechanism export / import fails |
|
8840465 |
Cannot create flat pattern drawing view when a part has a component |
|
8840693 |
Convert to PMI causes NX to crash |
|
8840967 |
Drawing cannot be opened in NX managed mode |
|
8841142 |
Rapid Inferred dimension is placed with incorrect orientation |
|
8841468 |
Missing parents on Feature, yet no Alert |
|
8841483 |
ugpart & ugmaster save same time and QAF of ugpart now in ugmaster |
|
8842094 |
ISV - problem with Spindle Orient on B axis millturn |
|
8842416 |
NX11 Import quality is bad while same in NX10 is ok |
|
8843195 |
Unexpected behavior - Line Normal To Surface fails with selected plane |
|
8843751 |
Cannot create "Crosshatch" On a specific data with "Point in Region" option in Japanese |
|
8844140 |
nx/abaqus interface - incorrect abaqus input for temp. dependent properties... |
|
8844152 |
Extrude Limits doesn't work with open profile |
|
8844929 |
Unable to save Part family: Com errors. NX crashes. Work stopped. |
|
8845328 |
Unit changing values are not reflected in object information. |
|
8845474 |
Sol 601 Rotational force not applied |
|
8845580 |
NX Hangs and crashes after midsurface creation |
|
8845652 |
Studio Surface - Fails when picking Body Faces |
|
8846094 |
changes in planar mill noncutting moves cause difference in posted code |
|
8846412 |
ship section tool fails |
|
8847164 |
Linked Feature is shown up to date when it is not |
|
8847305 |
Sketch not appearing in view in combination with manual rectangle |
|
8847508 |
UF_PART_file_name_for_display no longer works as documented |
|
8847918 |
NX486813: replacement assistant shows many more faces for mapping |
|
8848364 |
Faces cannot be selected until the part file is reopened. |
|
8848727 |
NXOpen.Features.Feature.ShowBody documentation needs to explain parameter |
|
8848738 |
"Could not connect to the Spreadsheet" error occurs when starting Excel from NX. |
|
8849196 |
NX crashes when manipulating layers on Linux |
|
8849714 |
UF_WAVE_ask_delay_status returns internal error for some update delay options |
|
8849775 |
The projection curve is divided at the intersection. |
|
8849807 |
NX11 created poor quality mesh that causes analysis error |
|
8849983 |
View Dependent Edit is not able to trim Extracted edges consistently/correctly |
|
8850178 |
Point turns fixed after losing parent object, no persistent warning or failure. |
|
8850515 |
Bolt circle centerline gives Invalid Radius for some holes in circular pattern |
|
8850680 |
"Tool Without Holder" Display setting does not work initially. |
|
8850996 |
Unable to find gouge motions for Variable Contour operation |
|
8851163 |
Incorrect Flute Length Warning |
|
8851280 |
Every time a standard component is added to an assembly there is a material message |
|
8851524 |
after "Save as" in NX, not mapped Master Form attribute is set to initial value |
|
8851577 |
Replace Feature - Inconsistent Edge and Face Mapping selection. |
|
8851707 |
Expressions DO NOT relink correctly using General Relinker |
|
8852208 |
Incomplete flat pattern view |
|
8852384 |
A Wrong warning message in Japanese was displayed when export motion -TC Vis |
|
8852440 |
A strange element appeared in part of the element shape of the updated 2D mesh. |
|
8852782 |
2D Exchanges moves objects outside of the drawing sheet |
|
8852858 |
Borders and Zones cannot make normal width labels. |
|
8852988 |
Resultant 2d mesh is incorrect... |
|
8853379 |
Adding flat pattern view of a sheet metal part with wave structure failed |
|
8853393 |
assembly component takes a while to move |
|
8853429 |
Opened drawing in Drafting, chose Convert to PMI, Crashed. |
|
8853947 |
When placing the "User Defined Feature", a warning message is displayed. |
|
8853965 |
The internal error occurs when I open item with the certain "Revision Rule". |
|
8853971 |
The internal error occurs and the dialog is down when I execute import operation |
|
8854036 |
The motion dataset isn't cloned when I execute "Clone Assembly" in Tc-NX. |
|
8854648 |
NX hangs up with "Given invalid view sequence number 0" |
|
8855023 |
PR 1955170 fix in NX12 be applied to NX10.0.3 MP15 or MP16 if possible. |
|
8855413 |
[CAD]The selected of the curve selected by "Composite Curve" is canceled. |
|
8855673 |
ApplicationSwitchImmediate() is retuning an Error code 896084 while setting PCB |
|
8855947 |
HD3D Visual Reporting - Comparison of dates seems not to work |
|
8856498 |
Errors when adding a standard deformable hangar to an Assembly |
|
8856545 |
NX Response Dynamics version 11 get wrong stress results for contours |
|
8857082 |
Please correct the character of the Japanese [Analysis Job Monitor] dialog. |
|
8857286 |
UF_ATTR_assign() API giving "This is a reserved attribute title" error. |
|
8857498 |
No result shown during Surface Continuty analysis |
|
8857505 |
Browser Shows Unexpected / Ghost Children After Replace |
|
8857753 |
Use of Secondary Geometry within drafting views causes SEVERE performance issues |
|
8857941 |
Interpolated tool axis fails to display tool/holder when machine is loaded. NX11 |
|
8858169 |
F&W Engage & Retract problems |
|
8858225 |
Hole Milling engage/retract not recognizing part geometry |
|
8858520 |
[CAD] Python journal fails when script path contains some Non-ASCII characters. |
|
8858528 |
NX11 - component position moved in step214 file |
|
8858604 |
Tracelines are not created in the correct position. |
|
8858757 |
When UDF is placed, the shape of the sketch is changed. |
|
8858805 |
The internal error occurs when I use the command [Ctrl+J] with keying in. |
|
8859336 |
Converting part from Inch to mm is failing with expressions |
|
8859453 |
Drawing Tabular Note Table Manipulation Performance Degraded by Large Assemblies |
|
8859906 |
NXOPEN: How to enlist Mesh Control objects |
|
8860023 |
UDF placement fails with "Unable to Paste" message. |
|
8860257 |
Auto Balloon position - problem (change position view) |
|
8860696 |
NX10 CAM - Divide face gives poor graphical result |
|
8860759 |
Unable to open drawing after saving in NX10.0.3 - Internal Error |
|
8860799 |
feature browser shows inconsistent parent/child relation |
|
8860902 |
Part family children sometimes do not inherit Release Status from Template part |
|
8861443 |
Please correct the character of the Japanese [Analysis Job Monitor] dialog. |
|
8861647 |
Problem about [Display only Part Module] behavior is incorrect. |
|
8861745 |
Unable to open part. Structured Storage Error: Object not found in file. |
|
8862006 |
Selecting Center of Electrode fails to populate location in documentation |
|
8862172 |
Mold Wizard Pocket Find Intersection Internal Error - If suppress feature |
|
8862270 |
Adoption of JT to steel in Ship Structure Detail Design |
|
8862274 |
Internal error when creating or editing an arrangement |
|
8862507 |
The error occurs when I open an idealized part without FEM and SIM in NX. |
|
8862660 |
Weight and Center of Gravity is not giving correct weight. |
|
8862688 |
Wrong Material Side is selected with Grip |
|
8862731 |
Unable to add part attributes in Part Family dialog using macro playback |
|
8862841 |
Internal error occurred when select origin of CSYS in [Center Mark] command. |
|
8863052 |
When Posting the Information window displays G-Code output at the end of program |
|
8863746 |
NX11.0.1 Save As - New Revision doesn’t follow BMIDE setting copyasreference |
|
8863770 |
Extension of curve/edges limited to 200% |
|
8863903 |
Welding symbol ID line does not correspond to the norm |
|
8864057 |
Problem with Normal CutOut Feature |
|
8864526 |
Cut/Paste Hole table query in drafting |
|
8864632 |
Section Drawing not giving correct result, Additional Structure is missing. |
|
8864775 |
Area milling - unexpected path |
|
8864805 |
Display of \221Face Edges\222 is not maintained if \221True Shading\222 turned off and on again |
|
8864830 |
Unable to fully load CAM assembly -> invalid or unsuitable OM object (580014) |
|
8865018 |
NXOpen.Positioning.ComponentPositioner.DisplayConstraints has no visual effect |
|
8865757 |
Can Unbend but can't Rebend |
|
8865792 |
Edges are disappear by turning ON Show Referenced Edges Only. |
|
8866294 |
Cannot open drawing: A deleted attribute id was used (580042) |
|
8866444 |
wire edm start hole does not allow selection of a plane |
|
8866546 |
Get "Invalid Foreign Expression" when opening assembly and the File -> Open fail |
|
8866617 |
Needs assistance with updating the SOLR files with the upgraded collection |
|
8866668 |
Incorrect Max Value On Surface Continuity Analysis |
|
8866682 |
Section Surface to new curve fails using feature curve but not single curve. |
|
8866872 |
Interpolated Vector, Tool and Holder are not visible when adjusting the vector |
|
8866938 |
SC Area Milling Spiral Smoothing clipping path |
|
8867471 |
Incorrect Result with "Reusable Pocket" |
|
8867477 |
Error occurred when bringing the cursor close to My Saved Searches in NX. |
|
8867853 |
NX quits while creating edge to edge connection |
|
8868086 |
Cannot extend a member more than 200% in the new Boundary dialog |
|
8868136 |
having Issue creating an Arrangement with Enable Multiple revision switch on |
|
8868202 |
Docs need to explain configuration to show Reusable Pocket -> Hole Series option |
|
8868702 |
mqc_logObjectSet docs need more info on using reference points and vectors |
|
8883322 |
NXMGR: Save as new item makes item non-modifiable: "part structure out of date" |
|
8883595 |
General Simcenter Motion Solver error by sensor about force |
|
8885145 |
Receive Memory Access Violation error using Draft Analysis |
|
8885857 |
NX9 Design simulation post processing bug |
|
8886074 |
Different behavior of nxclone with teamcenter and NX11 |
|
8886076 |
"Too many geometry elements in workpiece definition" generating tool path |
|
8886116 |
Any excel files don't open after we export to spreadsheet in Motion Simulation |
|
8886305 |
Feature replay on part results in endless update loop |
|
8886394 |
Redefine of "Datum Feature Symbol" leader not working correctly. |
|
8886599 |
EX: NX11 Output sent to ListingWindow before SelectDevice also written to File |
|
8886720 |
Unable to extend a planar mill boundary more than 200% in NX11 |
|
8887524 |
MKE - Materials/Machines tabs available for feature mapping rules but don't work |
|
8887862 |
Impossible to handle model because too slow |
|
8888372 |
Selecting any Turning operations in the part locks up NX11.0.1.11 |
|
8888383 |
Nominals don’t match between IE and NX |
|
8888641 |
With "Make unique" option in NX11 Non-master is not created. |
|
8888755 |
tcin_import does not import certain assemblies |
|
8888804 |
"Radius" was written as "Radial" by mistake. |
|
8888950 |
Component patterns moves if distance is changes between part and sketch |
|
8890053 |
NX Sheet Metal: Curve topology is not valid. Loops must be closed. |
|
8890077 |
[CAD]New import mode fails when assign new itemID although legacy import success |
|
8890138 |
Decimal Places from defaults not used in Electrode BOM Edit Stock Size UI |
|
8890194 |
Fail to create 1D Connection of Edge to Face type |
|
8890315 |
Unable to open the part file, input is wrong. |