Fixed Problem Reports

NX 11.0.2

 PR

  Description

1128285

Transform path does not work as expected with NX9 spline paths                  

1919987

Formboard shape segment fails to reposition connector                         

1931935

Cycle drill deep step value is used for subsequent drill deep operations        

1934516

Stock Offset Fixing moves instead of harness segment                            

1937574

Orient Branch results in incorrect results                                      

1938408

Working with SPACEPILOT PRO Rotation is slow and jerky when CutlevelDialog is up  

1938758

Face_milling creates non understandable little Movement when Blank Stock is defined

1940975

MemoryAccessViolation during Harness load operation                             

1942670

Show thickness by color generates wrong result                                  

1947497

Incorrect Cycle Time  in Synchronization Manager                                

1951730

Fitting Overstock placed incorrectly if overstock faces not it active ref set   

1958981

Multiple Blocks with the same Name exists after using Canned Cycles in Postbuil

1966382

Additional curves are not added to Flat Pattern                                 

1968760

mom_cycle_step1 is not reset at the end of an operation inside Postprocess      

1970900

Edit orientation of rectangular stock does not give correct results             

1979782

CAM environment move and rotate of part very slow                               

1980603

Electrical Routing: environment moves instead of spline path during offset rou

1983861

NX crash when import merge of HRN file into electrical connection navigator     

1984132

Edit orientation of rectangular stock does not give correct results             

1985101

Machine Tool Path Simulation not correct                                        

1986108

Creation of Stock solid body fails                                            

1986279

Rapid dimensions (inferred) prefers angular over horizontal or vertical         

1986660

After the move operation the RCP on the routing object disappears               

1989668

Create feature process doesn't use existing feature groups                      

1992951

Wrong location of Offset center point for arcs                                

1996884

Rapid Dimension usability                                                       

1997423

NX-CAM CYCLE95 missing CONTOUR events results in wrong NC-ouptput               

2199790

CPJ:Can not run Stock Fold in particular case                                

2206383

Split Run can't be performed if the run includes a direct-mount               

2206740

Unify Path does not work in the first attempt                                   

2209345

Move the component to separate assembly, Routing Characteristics disappears    

2209699

Incorrect Stock Length for the stocks having coped and mitred corners           

2210950

The tool path of Z-level profile is not smooth and with some wave motion        

2213373

Attribute added to Bend using the Attribute Templates is not displayed in proper

2223603

An angular dimension is given by inferred                                      

2228439

Tracking Point is not applied to NC data with  Machine Cycle motion output   

2233203

Sweep feature is split to multiple feature after playback and suppress operation

2235208

Auto Route cannot be executed  with Invalid guide string definition error mess

2235691

Interference curve removed while updating the drawing view                     

2242429

[CAD] The numerical value set by Qualify Part - Multi is cleared             

2242456

Wed like to add reference lines of base and center to a ship drawing         

6708714

When placing Lightweight Detail View: Memory Access Violation                   

6715810

Transform path error                                                            

6717508

If UNIFY_PATH is performed, the screw seat arranged to the elbow will shift or

6718089

Omission in processing to reducer at the time of performing a UNIFY_PATH  from  

6718111

Stock length doesn't change in Transform Path if we use in Stock as components   

6781656

With SAC, Transform Path can cause the routed system to become disconnected     

6784010

Stock offset ports move component instead of path                             

6807700

Routing segment fails to update after a placed part is moved                  

6832098

Wrong license used for Welding Callback                                          

6835606

GMC operation filtering out common XYZ moves, even though IJK are different     

6842858

Calibrate on Sphere $mom_probe_length_adjust_register is not set for tool adjust

6862557

Routing Stock does not use default seed part as expected                        

6887690

Cavity mill cut to bottom w/ 1 oper. but won't cut if user break into 2 oper   

6888383

Raster Image on Drawing in Part Family template is not in family member         

6906694

NX9.0 L10N CERT: Strings hard coded in cut region                               

6919922

Routing part raises Null Pointer Error during Part Cleanup and on Connect     

6919971

When Placing Part, null tag and bad pointer is returned                         

6926260

Result shows wrong for Endcut on L stiffener by neat trim                       

6926557

TPB simulation w/o machine drilling with tool axis inverted                    

6926774

Flange cut sketch is overextended and results in unexpected trimming           

6937547

NX Routing Move Part does not repair missing constraints in NX8.5 like NX8.0    

6957033

NX:  moving a point in a sketch looses its placement in the Flat Solid          

6971811

Reg: Overstock on Fittings not working                                        

6972188

Cutterpath skipping small area on part                                       

6977281

Endcuts End Treatment offset direction is incorrect                            

6979439

Fail to add FlangeL endcut into BUP L if it has web endcut                      

6981139

Scallop of TBA across collar plate is wrong                                     

6986792

Path should be offset along the ER system body                                  

6989214

Routing Overstock Density is wrong when overstock is applied to Stock           

6999973

Centered ER can get Flared-ER-L2 type of end cut                                

7100643

Regression from 8523. Modify path to offset clamp port - not complete & no ofst

7135193

Internal error Subdividing a path that contains Slack                        

7137553

Cutting Side Face colors for Built-Up cannot display after Plate Preparation    

7146709

Getting an Angular dim when you should be getting a linear dim                  

7149598

Can't modify extension length on Port in Qualify Part                           

7149989

Transform path copy original leaves behind segments                             

7150431

Datum plane layer is turned on automatically on Feature Replay                  

7150701

Dimension Issues                                                                

7157925

Dragging & dropping components via the ANT affects Routing Characteristics      

7160738

A zero Feed Rate in a Turning Teach Mode Operation not reported                 

7168698

Transform Path causes Inverted bends on legacy pipe data                        

7185464

Test is failing on Linux platform. Crosshatch is not updating correctly         

7186293

Backshell moves away from Connector after NX9 Spline conversion                

7189245

Motion Slow Animation in NX 9.0 when compared to NX8                

7191817

Importing hrn file crashes NX; reg wrt nx902mp2                        

7193890

Drafting image does not update properly in member parts                         

7199148

Much slower to load assembly in NX9.0.3 while NX8.5.2 can load the same assembly

7199282

Stock body creation fails in NX10 after converting mating and splines           

7215890

SIM15 sample file simulates incorrectly                                         

7217078

Circularity update when create another seam point at knuckle                    

7218857

Generic Motion Control - Rotary Point Vector Ignore-same pt. diff vector        

7247892

Flowcut Cut Regions, merge error                                                

7251062

Single Step Feature Replay in NX9 leaves a lot of layers visible               

7254570

CSE - Corner Rounding (RND) incorrect                                           

7277671

Rotate Component command in Routing Electrical does not rotate the selected comp

7286364

Convert Routing Splines failing on a part file                                  

7293424

Inferred Rapid dimension gives unexpected results                               

7316149

Associativity of Surf Fin Sym, GD&T lost when move View to other Sheet          

7317933

UGPOST- workplane switching not working on same part and  operations in NX8.5   

7326490

Problems with the simulation example sim09_turnmill_5ax_cam_sinumerik_mm.prt    

7340211

3D-Section curves did not update after change the arrangement                   

7348781

Tool motion doesn't follow the tool path during the tool path based simulation  

7388478

RCPs for corner bends are not getting deleted                                  

7392151

Overstock not using the expected seed model                                     

7400730

[1]Modeling ugnx1100_8.189 Autotest Failure:Nodes differ : original value 133.14

7420240

Inconsistent result when changing spline path length on a new\\existing part    

7434719

Post Builder : Probing Missing event for Probe Boss                            

7442816

Translator crashes on translating a block form NX to V5                         

7448369

Reg_8.5.3.3: During re-associating of Datum targets NX throws internal error    

7471447

SAC Overstock fails after merging covered underlying SAC SRs                   

7493531

[Deviation:Gauge] is not refer to the correct vector when using 3D with colormap

7500621

NX Motion animation performance in NX10 vs. NX8.5

7507455

Aligning Angular Dimensions arrowheads                                         

7510483

BETA - component groups: Order in ANT not as in NX8.5                           

7514970

Section lines do not update to real time when arrangements changed             

7515206

Formboard, rotate component does not actually rotate a component                

7518230

Length value calculated for mitered steelworks is incorrect                     

7521396

NX: Image embedded on pft drawing does not stay in pfm                          

7532378

When miter corner is present, stock length computation is not accurate         

7535294

[1] Sheetmetal ugnx1100_18 Autotest failure : Could not find object with name p2

7536587

Plate bounded by non-orthogonal square cut get wrong boundary                   

7542322

Unknown Error in Routing - when creating Formboard drawing                      

7553479

Unable to export drawing when there is assembly cut in the file                 

7556383

Setting Configuration with Role does not reread a custom ude.cdl                

7556807

Line that was erased using View Dependant Edit is regenerated                

7558468

Profile cutouts position is incorrect in Mirror Copy       

7567745

Applying Overstock to a Fitting causes the Fitting to be modified       

7574495

Wrong IPW display in CSE simulation - PREVIEW                                   

7576166

Can not load assembly - internal error                                          

7576853

Drilling : IPW not Updated when Blank Geometry Change                           

7581937

Need method for Operation Navigator-MB3-Tool Path-List Gouges           

7589370

Message showing Invalid inputs to create member identifier while creating ParF

7590212

[CAD] In NX11, Match Edge commands response was worse than NX10.0.3           

7590461

Dimension Extension Line changed after view update                              

7597844

Add the function to create weld group automatically in Import CSV File          

7602439

Migration autotests are failing for  XMl differences in NX11                    

7603769

Rapid Dimension with inferred Measure Method goes wrong                         

7607774

The problem that the blend face is displayed as Negative Outer                 

7613498

CAMFest16 - Feedrate display in verify not set                                  

7615350

Occurs Error when Open the part again                                          

7622436

It will be missed one of Subsystem in graphics window when check Split System   

7636656

PR: Wrong feature angle for stress averaging on first plot                      

7637567

KF nx_features_divideface not updating correct if part is not the display part  

7637731

Routing Weld part dragged from reuse library is not positioned correctly        

7637941

Broken link for AskEntityParents()                                              

7638705

Exporting a NX part to dwg R12, FCF symbols incorrect                           

7639314

Displayed probe retract moves do not match posted output for probing           

7640989

Cavity Mill with Trim Boundary is unpredictable with Top off Levels is set      

7646248

Bei der Parallelen Erzeugung wird eine Fehlermeldung erzeugt                   

7647157

Fail to edit the Groove Weld twice after reopen its saved assembly part         

7650287

Sniped Angle endcut is not shown if setback value is lager one                  

7651323

Machining and NX . Function GetInputIpw fails with exception Error 1850018   

7653358

Global shaping only deforms the first selected sheet - for some types   

7654665

NX10.0.3.5 doesn't honor cdl file changes during the session                    

7654743

Rapid Dimension with inferred Measure Method goes wrong                         

7659920

IC60688:Text misplaced in dxf exported with balloon notes                      

7660789

Display is not updated in static wireframe if Perspective is ON              

7661225

Rapid Dimension creates an Angular dimension when a Linear is expected          

7665054

Report of Copy Basic Design Object is wrong                                     

7665816

Objects on Disabled Layers continue to be exported using AutoCAD DXF/DWG wizard 

7670849

FBM: Operations from MKE are wrongly assigned to existing feature groups        

7673038

Modeling: Layer of first feature is made permanently visible by feature playback 

7675888

[1] TcinTest_FileOpen_PR7356594 new test plmxml fail                            

7677469

mom_next_oper_has_tool_change reports yes in some cases when it should not   

7679778

Cannot Open an IGES file, internal error returned                               

7680352

Cannot evaluate CSYS when create bracket based on mirror outcome                

7680420

Tilt_Tool_Axis_Negative_Stock_problem                                           

7680835

FBM: UDE parameter description with period marks parameter as incorrect         

7684758

[De-select All of Intent] does not work correctly                                

7685740

Show result cannot update correct after symmetric option is modified          

7685942

Boss-Milling with Chamfer cuts too depth                                        

7687937

ACIS export selected object fails with an error message                         

7687956

Block Name end_of_problem is not output with Linked Post                     

7689227

Wireframe colors not displayed correctly when import to work part        

7694027

NX415528: Replacement assistant does not work as expected to work part  

7694518

ACIS translator should not allow to select light weight bodies for translation  

7696105

Cannot make cells hidden, and error message is not clear for the user         

7697354

Not able to save as different item-type (item) out from a item-type STD     

7698022

Transition stiffeners didn't inherit flange free end cut shape               

7701747

[1]Patch_nx1003.13 ugmgr_MCD_t16 +++ Nodes in the master XML file are missing 

7703263

Structure inside ONT does not match correctly inside Structuremanager after Revi

7703293

Function Update Resource Revision does not work correctly for the Machine Kin

7708980

Routing LENGTH value incorrect on MITER cut non-round stock                   

7710130

Parts are marked modified on load (Mechanical Routing)                          

7715951

One seam curve was missing in expansion view                                    

7715966

Plate boundary wasn't highlighted when select related symbol in expansion view 

7716030

No Log file is written for ACIS translator on import and export                 

7716099

Delete Seam should take away the rep curve for the deleted subsystem            

7718159

AutoAssembly with NX10.0.3 is not working like NX10.0.2                        

7720944

Hidden lines are not like expected in PDF                                       

7723888

Can we prevent Feature-Process?                                                 

7723918

Current Issue:Dimension extension line changed after drawing update            

7725617

Internal error opening assembly that has promotion                              

7726489

NXPOST- tool path copied multiple times mistaken for last operation in group    

7726963

autoNameSanitize = false is not working for JT export     

7727498

[2]ugnx1100_31.2016052600Autotest Failure:+++ XML comparison failed             

7731078

Cannot delete expression in the part reopened with Symbolic installed in OS    

7734027

Datum not correctly displayed with format dd/mm/yyyy in tabular note cell       

7735486

Materials with thermal properties are not updated when update is selected      

7735543

UF_STD_import_stl_binary_file () does not import stl file as lightweight body   

7735944

NX locks after Turning operation is Copy/Paste from another file                

7737916

Scantling didn't update when stock of plate was changed                         

7738224

[FPV][SLED] Exception / Error during Export  CATIA V5                        

7739399

Step drill tool length reported incorrectly by mom_tool_length                  

7741231

Stiffeners flange cannot be properly cut by the flange free end cut            

7743266

Error when generating an operation with UDE and Refresh Before Display on     

7743282

Parallel Generation in TeamCenter does not delete the temp Item after closing   

7744321

Gaps between tool path in Floor Wall operation                                  

7744774

Customize From dialog shows internal names in managed NX session                

7746095

Hole Making/Manual Drilling/Model Depth CSYS behaviour issue                    

7747614

No parts is created even they are mirrored successfully and reported            

7747666

Cut Region is not recognized correctly and the wrong tool path is generated    

7748577

Offset face(7) get error when playback in NX11                                 

7748866

[1]nx11mr TcinTest_FileOpen_PR7356594 +++ NXException for error Cannot determine

7748882

[3]nx11mr TcinTest_DesignFeature_PRxxx XML comparison failedSS_recipe         

7749739

Unable to rotate components in formboards from earlier versions                 

7749810

Zlevel operation with Cutter Compensation and Output Contact Data is in NX10.0 

7750850

Edit the PlugSlot feature but its edge preview is wrong                         

7750911

Rapid dimension in Drafting creates Angular dimensions between parallel entities

7750979

Phantom Points shown on PDF - exported from NX, or on Plots from NX             

7751084

Some text and tables cannot be selected or edited                            

7751860

Post Builder - Axis Limit Violation Handling issue                              

7752515

Rapid Dimension creates an angular dimension when a linear is expected          

7752530

Rapid Dimension creates an angular dimension when a linear is expected          

7752788

Tool path divide gives warning                                                  

7754321

NX:  Assembly Constraints for suppressed components do not update               

7754350

Update view raises An attempt was made to decrement an already-zero       

7755945

Edge Name not existing anymore on one half of a bodyface                        

7755946

The gouged motions happen in the corner place in this Zlevel operation         

7755973

There are some sharp corner cutting paths happen in this Z-level operation     

7756011

The trim boundaries doesn't work if I toggle on the option Top off critical dept

7756033

Strange redundant cutting paths happen in this cavity case as the oblique axis  

7756044

There are some sharp corner cutting paths happen in this cavity operation case

7756076

Terrible cutting path faults happen in the corner place in this cavity case   

7756103

Option Common Parameters - In Process Workpiece does not update               

7756919

[8] Drafting NX1101_140: Autotest Failure: Drafting auto-tests are failing with 

7758724

Drafting Balloon origin not created at correct location                         

7762152

HoleMilling Not Updating to In-Process Feature Correctly                        

7762581

Make Unique removes Image Logo in titleblock                                    

7763934

[1]Modeling ugnx1200_1.75 Autotest Failure:Nodes differ : original value new val

7763960

Manufacturing Configuration file not working                                    

7764079

NX File Open Cannot Open File in NX 9.0.2                                       

7765027

Flat Pattern view does not update correctly when no sheet metal license present 

7765346

Error editing arrangement in these assemblies                                   

7765878

Feature update performance very poor when working with feature mapping          

7767290

Create PEDPRO feature, save and reopen, there was a redundant line appeared   

7767910

CAM NX10 - Customize From Template Not Appearing To Work In Managed Mode        

7768719

Internal error while editing the one step formability creating the new body    

7770526

User Expressions disappeared after Save the part, with Symbolica installed      

7771613

Wrong expression left behind after deleting its PI link, with Symbolica installed

7771760

Wrong error alert, cannot delete new created IPE, with Symbolica installed      

7772750

No ISV variable for mom_tool_tip_offset                                       

7774192

[2]Modeling ugnx1101_1_parasolid_29.1.0.91 Autotest Failures:Nodes differ : orig

7774866

Reg_NX1101IP0[1] TDC update autotest failed due to Assertion error on drawing up

7775131

CAM NX10 - Customize From... Library_Dialogs incorrect on Profile3D Operations  

7775775

Text parameters of circular burring are incorrect                             

7775969

Missing KF function interPlaneLine() in NX11 - NXSHIP license not available  

7776261

Boss milling incorrectly identifies feature when there is a chamfer             

7777583

[2]Internal Modeling ugnx1101_2 Autotest Failures:Nodes differ : original value 

7780378

Getting the GeneralName of FeatureGeneralPropertiesBuilder doesn't work         

7780409

Availability to set view depth per view for Fore and Aft                        

7781132

Edit SgRP of Base Data will generate extra points in feature group              

7781588

Weld Point Wizard doesn't allow multiple selection of Single Faces when Exploded

7782814

REG: Cannot select Curve or Point in Fill dialog in 4GD mode                   

7782899

Unable to create a Flared Bevel Groove Weld in a specific constellation        

7783051

Convis refsets incorrect if multiple bodies have same name                      

7783607

Can't open drawing part file in NX11                                            

7784636

Failing to create the new NXOpen Wizard project through VS2013 (JPN lan pac)    

7785098

Expressions incorrect evaluation and unit conversion for temperature            

7785416

New ude.cdl not loaded after selecting new configuration file                   

7785616

Wrong lines show for sectioned plates                                         

7785647

NX11 NXOpen Wizard for C/C++ doesn't work using German Visual Studio 2013       

7785835

Shop Documentation in Batch Processing does not work                       

7785940

Redo fails for the block feature if created using interpart expression        

7786897

Partially Copied Cutout on the plate                                            

7787625

Change the constraint type cannot work fine in the one-step                     

7787770

Change the Type to intermediate unform,constraint type cannot update            

7787885

Parts can not be opened with NX 10.0.3 MP7                                      

7788031

Getting Incorrect Bitmap File Format                                            

7788478

Probing Cylinder, Interior with the Radial Clearance set has 3 problems    

7788762

Internal error occurs when editing Local Un-trim and Extend                  

7788843

Should give an alert when the number of edges changes during copy               

7790108

Check World error after change base data source which due to feature fail       

7790212

Assertion failed after export ACIS                                            

7790409

Unable to select Feature in HOLE_BOSS_GEOM - invalid or unsuitable OM object   

7790569

CAM Configuration Reset to Default not applying UDE changes in NX10            

7790977

Cant give HydraulicValve as HydraulicCylinder in high level assembly parts  

7791195

Bracket not created during CBDO for Feature copy was failed                   

7791331

Secondary Geometry Line Color default overridden by background color            

7792155

Name of sheet body is mistaken                                             

7792232

Attribute in Parts List is Fetching Wrong Value                                 

7792578

Performance of feature mapping after a model update can be slow                

7793960

NX CAM cutting tool graphics preview in managed mode is slow                   

7794452

Stiffeners don't show in Expansion view                                         

7794457

Three Simple Holes disappear during feature replay                             

7794592

In the case of Japanese NX,[Rotate view] dialog is not localized              

7794829

Unable to create 2D Manikin                                                     

7795401

KF Adopted base DWG view fails to save once moved with bad pointer              

7796354

Trim boundary reducing Flowcut tool path on wrong side of boundary              

7797190

Tool Shank clearance distance not correct in Cavity Mill                        

7797390

Performance problem if Part Name Style Attribute is changed to OBJECT_STRING  

7798155

Can't de-select Profile if I toggle select intersecting profile                  

7799440

Only half of Edge reinforcement show in section view                           

7799549

Wrong reference to NXOpen library libnxopencpp_mfg.so in NX11 on Linux          

7799693

Assertion failed when try to save the User Defined Weld in 4GD mode             

7800339

Cannot create any Fill DF by Curve in 4GD mode                                

7800362

Turnings violates Part                                                          

7800880

NX481587: Geom Matching in Replacement Asst does not work for a simple cylinder

7801071

The value of electronic_cam in runtime inspector is error after restore snapshot

7801403

CAM NX10 - PointToPoint Allowed Selection Causing NX to Stop Responding         

7802737

Assembly loading error UPDATE/DELETE has gone through too many iterations       

7802758

Incorrect number of block when user restore snapshot and play simulation      

7803019

NX11 Routing - Extension issue on Fixture ports                                 

7803150

Part Family functionality doesn't work with attributes containing parenthesis   

7803674

No hide option for Driver Hand Control Reach                                    

7803892

For the inch part, there is a error about TL23                                  

7804022

Assertion while edit Glazing shade Bands                                        

7804658

NX paths behave differently depending on the faces being sewn or unsewn        

7805982

Component attributes not mapping/displaying correctly in NX                     

7806840

Edit the broken Surface Weld to be normal but the icon is wrong                 

7807058

Can not edit the precision of a tolerance                                       

7807096

Move Object (drafting) - when pick 2nd object, handles jump to lower left corner

7807319

Invisible layer is changed to Visible when executing Replay command          

7807332

Modeler error occurred when edit stiffener by support but can create in detail

7808325

Postbuilder 10 is turning on include UDE setting when it was turned off       

7808345

Proper UDE CDL file not read when change configuration .dat                     

7809166

Nested 3+ groups and long op name causes variable to default to YES             

7809564

Unable to close a part : Invalid Solid Object Tag                               

7809567

mqc_askRetainedDimensions() reports shadow dimension                            

7809675

CAM NX10 - Hole Milling Use3D Status Not Updating                               

7809764

Load part causes O/S ERROR: signal  11 and NX crash in Linux                    

7809848

Cavity CutLevels Graphics Causing 3DInput Device Performance Problem Ongoing    

7810227

CAM NX10 - Hole Making Feature List Not Updating Consistently                   

7811773

NXMGR:  fails to open Assembly the first time after renaming ItemID             

7812019

To use Check Wall Thickness the rolling balls are outside the body            

7812022

To use Check Wall Thickness the length and direction of the Ray is incorrect

7812415

The Welding Line was disappeared when you finished the analysis,it is wrong  

7813275

IPW is obscuring the path in a user defined op. Standard op does not do this   

7813506

Linked Feature is not displayed in Interpart Link Browser                   

7813543

Its not highlight to select the product before clicking the Check Wall Thickness

7813569

Its not highlight to select the product before clicking the Check Regions butt

7813674

Tool Path of Contour Area Operation generated in NX10 is different as in NX8.5  

7813769

Some plates are not highlight fully when annotate ship object                   

7813913

In Electrode Drawing,the two blocks you selected will be selected from two to on

7814312

Adding Component to BVR-4GD Sync causes new component to stay off when loaded 

7814930

Pocket update incorrect when edit fastener assembly counts                      

7814937

CAM - Incorrect Collision detection                                             

7814997

Curves still there and will cause assertion after suppress the feature          

7815826

The result is out of order ,when Electrode Drafting with Self Contained Type   

7815918

Using the Copy Electrude function to select face have issue                   

7816114

[4]TcinTest_4GD_SmartSave_Suite1 +++ XML comparison failedTargetEffectivity   

7816226

Gouge and Collision Check - unreasonable processing time                        

7816576

CAM NX10 - HoleMaking-ChamferMilling Alerts Not Indicative of Resolving Problems

7816693

Editing Floor Wall operation causes the status of the operation to Regenerate 

7817576

Reverse direction button not working when toggle on Use Inferred Constraints  

7817679

Incorrect tracking point data when using turning tool from library              

7817890

NXMGR:  Make Unique on NX Component cause Internal Error                        

7818677

Assertion failed when activate Show Dimension with Angle Measurement            

7818742

Some drawing views are not up to date in the CNC Sheet Type                    

7818880

Invalid inputs to create member identifier                                     

7819030

Loosing Part Boundary edge after Replace Component                              

7819836

Retain assignment in assembly while on clone assembly                          

7819944

Tool path calculation on groove with additional profiling results an error      

7820388

Thin Shell Mass using Curves and sheets gives incorrect mass value for kg-mm    

7821072

Collar plate located wrong place after copy to another plane                

7821307

Check world error after create pillar                                          

7821428

Failed to create bracket for modeler error                                      

7821565

An assertion failed when un-suppress body after Initialize Project              

7822213

NC: Wave PMI Linker displays Internal Memory errors when Frames have Custom Symbol

7822466

Workpiece is highlighted after using Transform in the Cavity Layout            

7822789

Ship Section view missing stiffener                                             

7822817

Some SBSs fail and some brackets find wrong face to reference in Transition     

7822957

Modeler error occurs when Extrude Facet Body                                 

7823383

Unable to find Pen Requests in the Pen Management Gadget using Source Control   

7823392

Fail to create Fillet Weld if created (h) Contour Height by Measure value       

7845567

Min Tool Axis Change does not work correctly.                                 

7846172

No NX Open or KF API to find retained section lines                             

7848512

Electrode Design drawing does not update Teamcenter attributes initially        

7848856

Replacing cable clamp with same part fails - incorrect obj for this operations  

7849097

NX has frozen when I tried MATLAB Integration                                  

7849678

Inferred dimension between to parallel centerlines creates angular dimension    

7849690

NX456475:[1]Modeling ugnx1101_6.133 Autotest Failures:Nodes differ:master-curve 

7849753

Unable to edit tool machining entry in machining data library                   

7850516

VAL Revise in NX fails when ItemRevision.item_revision_id is mapped             

7851163

The location of the point update incorrect when selecting a center of the circle

7851375

Parts failing to mirror                                                         

7851397

No need to create continuity symbol when stiffener systems are on both sides    

7851570

Add signal into inspector-play-stop-play...NX will freeze                    

7851863

You will find screws couldn't be pocketed when you drag the screws on the point

7853616

ugtopv does not return the correct errorlevel?                                  

7853980

To use Edit Parting and Patch Surface the display have issue                  

7854307

NX Hole Issue                                                                   

7854551

[1] ugnx1101_6_parasolid_29.1.146 Arch Autotest Failure: Test does not run because

7854579

[2] ugnx1100_6 Arch Autotest Failure: Test cases do not run because they cannot 

7854870

Un-suppress failed when click Checks of 2D manikin and Mirror_CERT             

7854922

Fail to find a reference face to reparent when other part is fully loaded       

7854934

Patch Color is wrong in the Patch Surface function                            

7855050

Error (null tag not allowed) when opening part from TC/NX                       

7855311

CSYSSupport: Component location update incorrect when CSYS namedORIGIN_CSYS1  

7855505

Drawing view not flagged as out of date if it contains a break out section      

7856037

Importing part files gives error                                               

7856268

Internal error occurs when using the Enlarge Surface Patch function            

7856322

Can't create stiffeners by support                                              

7856418

Assertion object ... that is no longer alive...left behind when cursor across 

7856451

Part family table containing formulas not updating correctly                    

7856459

Opening a CAM part gives Internal error: memory access violation              

7856622

CAM NX10 - Hole Making - Chamfer Mill - Inferred Diameter Not Correctly Identified

7857679

Edit Parameters causes updates but Edit with Rollback does not                  

7857807

G65 doesn't accept minus system for the M argument                              

7858722

Change base data source, Windshield Datum Points feature did not update       

7858728

Change base data source, Vision Planes feature did not update                

7858729

Autotest case fail:Move one branch from one run to another run                  

7858730

Change base data source, Close Range feature did not update                    

7858896

1101(6):Pre Proc-SIM:CaeTest_FieldInterpol_jat:No results for machine           

7858960

Wire EDM internal trim operation generates incorrect cutcom                     

7858993

The project KIA12R301_Perfect Costing Integration performance is too slow      

7859054

When select point and value is beyond range,it should pop up alert              

7859068

CAM NX10 - Hole Making - Re-selection of Feature Causing Issues with Existing Ops

7859077

Symbol is still exists even its boundary has been defined                       

7859107

Profile cutouts on the subsystem are not copied successfully                    

7859123

The naming of the newly created collar plate feature is not correct             

7859186

In Electrode Drafting,when you select Use Instance and cancel select the Rename 

7859486

NXMGR:  Suppression lost for multi-level context when other part is suppressed  

7859620

[1]Modeling ugnx1101_7.143 Autotest Failure:Nodes differ : original value 11    

7859740

Floor and wall not cutting a wall face                                          

7860037

Mirror parts is slow                                                            

7860087

NC: Wrong behavior moving Signals in PhysicsNavigator when situation in assembly

7860140

Dumb point show in Mankin, when edit feature                                   

7860208

MODEL reference set of bracket should not including the Start Attachment face   

7860232

Must toggle off rear view section, Eyellipse can be finished edit               

7860366

Pattern Face not eligible to component pattern                                  

7860444

Cannot select Subordinate as component to create Easy Spot in 4GD mode          

7860519

Should not update the collar plate in preview when operate attribute type option

7860539

NX-CAM Tool Type LASER , missing mom-var results in post-run error              

7860583

Seat Lines can't undo, but after using other function can undo Seat Lines     

7860616

The value of Surface Weld connected part 1 is lost                          

7861488

Surface Weld connected part 1 is wrong when select the linked face in BVR mode 

7861531

Difference result after undo & redo                                               

7861684

Create Plate is slow                                                            

7861744

Cannot generate outer region while square cut                                   

7861785

The body face is grey ,but it can be selected                                  

7862038

Reuse Library Search index not working after upgrade to SPLM Docu Server v2.0   

7862094

Its different the nodal coordinate value                                     

7862150

Assertion Error while editing Deck feature                                     

7862327

Steel Feature Collar Plates do not have thickness direction option              

7862401

[5]Modeling Internal ugnx1101_7.144 Autotest Failures:Nodes differ : original va

7862424

Feature Replay turn on all layers                                               

7862467

[1]Modeling Internal ugnx1101_7.144 Autotest Failures:Nodes differ : original va

7862693

Feature Replay doesn't allow you run only to an earlier current feature         

7862758

NC:+++ General Fault Exception: cancelling 4GD Subset Previews current feature         

7862902

Report Shortest Tool returns No Colliding motions were found              

7862931

Add Reusable component update incorrect when Use Quantity in each operation     

7863070

[1]+++ XML comparison failed: NXOpen.ValidationMemberViewValidator            

7863135

NC: Internal error appears while changing vector direction after adopting object

7863162

Seam feature is gone during copy seamed stiffener system                        

7863170

RM object had an unsuitable OM class for this situation when editing Geometry   

7863172

In Check Wall Thickness,the Calculate time of the cone spent too much compared

7863183

Assertion failed when inserting misumi ejector pin after initialize project     

7863229

In Design Inserts,you will find the position of the Inserts were wrong         

7863263

Edge reinforcement on cutout is not copied correctly                            

7863385

Threaded Hole for End Body Automatically toggle off                           

7863419

fileexportDXFDWG CGM produces blank sheet                                    

7863979

Post - Siemens - quadrant limited arc output wrong                              

7864241

Support add PRP in context assembly                   

7864645

Axis Parallel in Linear Path does not create lines relative to RCPs             

7864921

In Process Feature CSYS Lost Position/Orientation when different tool used     

7864983

IPF CSYS Lost position when operation moved to in Program Order View            

7865412

Failed to create pocket for the reusable component when create pocket         

7865418

UI of Eyellipse dispaly incorrectly                                             

7865419

Calculate Area generated sheet body need to remove parameters                 

7865421

Pocket function need to support can choose to reuse component as a tool        

7865440

Internal error when remove parameters                                           

7865441

The UDF cannot be deleted                                                      

7865510

When no database, the Design Ejector Pin should not be can be specified point 

7865592

Reusable component pocket update incorrect when edit point list(after paste)    

7865627

Internal Error when create Remove Parameter                                      

7866244

UNDO/Rollback on KF UI error not working as expected since NX10                 

7866438

Internal Error:Memory access violation While doing a SAVE AS with altrep and dr 

7866489

Ship Manufacturing attributes should match Ship Design attributes            

7866490

Non Master Drawing is showing up in the Save As UI When doing save as of the Ugm

7866557

Edit Hand Reach feature and default value was changed                           

7866586

It is better add operation message on Information bar                        

7866608

In Calculate Area,the position of the  Bounded Plane is wrong if you select the 

7866686

Missing continuity symbol between two profiles of equal height                  

7866733

Along Vector should always grey out if there is only curve boundary              

7866782

We should add seam symbol for intersection seam on sectioned plate              

7866960

Support Quick CSYS and Offset CSYS process                 

7866969

Thickness of the separated face plate created by profile transition is wrong    

7867383

Zlevel Profile operation: NX hangs when generating Tool Path                    

7867433

Checker mqc_check_solid_faceted_matched fails for internal objects on layer 257

7867608

Edit Unparameterized Features in NX11 deletes from the solid          

7867848

REG:Assertion failed occurs when copy/paste bounding body                       

7867916

Modeler error: object is not of type expected when create P type bracket        

7867930

An issue about feature expressions                                              

7867937

Linear Dimension did not update occurred when I open Drawing part on NX11     

7868002

Autotest was failed by Athena run and XML comparison failed                  

7868131

Should add filter when select object in object_source                            

7868133

[2]ugnx1200_8.2016102600Autotest Failure:+++ XML comparison failed              

7868136

The Next button is inactive in the the Hand Reach Function                     

7868137

Mold Base Library Information doesn't show Catalog when editing component       

7868842

NX:  An attempt was made to decrement an already-zero ref count of an object    

7869025

Seam feature is gone when edit camber deck by Edit with Rollback                

7869046

Passenger position should not auto-loading Driver SgRP point.                    

7869072

Assertion failed and Internal error occurs when create Ribbon Builder           

7869230

Set the bigger radius,and return the assembly mode,there will be a error        

7869243

NX crash when user add prt and run simulation, then click the model in 3D view  

7869271

OM check Error after updating all features                                      

7869282

SOLID_PROFILE_3D Toolpath is Incomplete between 2 Check Geometry                

7869288

Reg: Fastener Assembly location update incorrect when rotate about ZC-axis      

7869292

Reuse Library folders get collapsed always by Mold Wizard component design UIs  

7869326

Internal error occurs when create project sheet in YC plane                     

7869346

Using Pneumatic cylinder and valve in NX MCD gives strange results              

7869452

In Ejector Pin Post Processing,Assertion failed appeared when select Rename Comp

7869681

Bad nodal displ csys in NX11 sim of afm with multiple levels                    

7870259

[2]ugnx1101_8.2016102900Autotest Failure:+++ XML comparison failed              

7870298

Plates are coincide when create plate                                           

7870330

Remarking date could not be calculated after created PIug-in for the plates    

7871197

The design blank name is not correct when open more than two Electrode Design Pr

7871202

Internal Error when EWR Global Shaping                                          

7871240

Assertion failed occurs when creating Merge Touching                           

7871425

Incorrect result when changing dimension arrows by hot spot                     

7871847

Check world failed when modify Fillet to Skip Welds                             

7871988

Setting Time Attribute Does Not Save if it is Set to the Same Day               

7872082

Getting a script error in Visual studio2013 with NX11                         

7872135

The library data type of Electrode Fixture is changed when change display part 

7872208

The Component Pattern wouldn't update when you changed the Angle or the Count of

7872249

Assertion Failed when delete the pattern point (circular pattern)              

7872286

Two CollisionBody not stick together in high assembly level after run simulation

7872626

Custom Standard Part is returning information to the Information Window         

7873184

Standard part bracket failed to mirror                                          

7873212

Fatal error of play when select elec_cam in operation and toggle on master axis

7873218

Fails to paint parameters between profile cutouts even in a simple case         

7873229

IE happens when delete requirement                                            

7873236

Serial number will not update if change the name rule in copy solid rename dialog

7873244

Tripping Bracket always reported as partially mirrored                          

7873247

There are several error on Mirror Certification command                        

7873249

Reference is not work in copy solid rename dialog                               

7873273

The View Results in Vehicle Packaging Validation button works only once       

7873290

After create PedPro and edit base data,there are two extra lines on the loading 

7873291

Assertion failed pop up when mirror a plate with ER                           

7873310

Incorrect result when edit positioning feature                                  

7873349

Assertion failed and seam feature fails to be copied                            

7873384

OM world failed check about Strip Layout after delete station                   

7873386

Context Attribute of the collar plate is changed after copy                     

7873406

Internal error when MB3 on the library node after define reusable object        

7873450

Reg: Internal error drag/drop the krx file to graphics window                   

7873485

Stiffener Subsystems cannot be created after check the Split System option     

7873542

In a Holemaking Operation, the See-Thru Preview fails in NX10.0.3 MP4 and MP8   

7873555

Internal error when delete sphere                                               

7873562

Internal error when edit minimum projected dist measurement                     

7873574

Request tag not in display according to the source control option               

7873583

Internal error when create udf                                                  

7873593

Internal error when copy feature                                                

7873612

Plate is missing in view after change the thickness                             

7874509

checkmate_execute_UAF.dat autotest Failure:+++ Found XML comparison difference  

7874544

No tooltip and cutline in Change owner Component dialog.                        

7874552

The result of editing a Master Model blank is incorrect in Electrode Drawing when

7874584

When MB3 on a PTS part when electrode on, the edit icon is electrode          

7874607

In Copy Electrode,when you select the Datum Plane  first,you will find the Elect

7874610

Initialize action type will be locked at Original even click reset and AF     

7874673

Cutouts fail to be mirrored after save and reopen the assembly                  

7874683

Pop up error when user select symboltable as object in change_owner_component   

7874802

Replay on a operation will give the message Internal error                 

7874856

When create All-around Vision,can not select faces from different components    

7874891

Die Engineering - Binder Ring operation fails                                   

7874970

Manufacturing attributes not copied during painting edge cut                    

7875204

NX CAM: Generate a Fixed Contour Operation gives inconsistent ToolPath          

7875807

Incorrect result when change location reference to #Top Face of Head          

7875812

Current work part not contain a valid reference set when redefine boundary 

7875817

Add points not deleted when toggle on/off Symmetrical Distribution            

7875918

Can't annotate plate                                                            

7875979

Null Tag not Allow when validate the longitudinal plate system                  

7876152

After loading the Mechanical routing is always modified                         

7876154

Modeler error occurs when editing global shaping                                

7876245

Some errors arise when edit one step feature                                   

7876259

[1] Drafting NX1101_IP8: Autotest Failure: Drafting auto-tests are failing with 

7876342

Automatic assignment of Dataset Name on altreps fails after creation of drawing 

7876382

Null Pointer Error while adding PF Template Asm as DE through Reusable Library  

7876937

REG: Assertion Failed when replace component after create pattern             

7876966

Internal error memory access violation in Mold Wizard Component Drawing         

7876967

Assertion when creating grid twice with different spreadsheets                  

7876972

Part Family instance position is wrong and it still can be modified in cooling  

7876974

[2]ugnx1101_8.2016110200Autotest Failure:+++ XML comparison failed              

7877194

Drive geometry group missing in drive geometry rotary floor                     

7877203

Operating Feature2Cost Stamping function appeared error in Bending Areas      

7877239

Wheel Covering is not associated with Base Data                                  

7877337

Ejector Pin will not rotate align with orient Z axis when it is a working part  

7877430

Failed to mirror Brackets                                                       

7877450

Assembly Import from NX to TC fails for Item Type Workarea                      

7878192

Import the specified file(csv),there will be Internal error                   

7878239

Cloning the assembly sets original parent as modified                        

7878381

The Reuse library cannot go back to normal reuse library after add an electrode 

7878411

Plate created with wrong region                                                 

7878706

KF function subString truncates string to 133 characters in NX11                

7879409

Select an object and find in navigator can't switch to the correct navigator  

7879558

AF when user run simulation and edit rigidbody for block in runtime time error 

7879586

There is an error message pop up when create Class Drop feature           

7879643

CFW setting UI show the secondary group for inappropriate types                 

7879704

Result error when toggle on the Use Inferred Constraints                      

7879728

NX cannot show the feed rate properly when verify drilling operations TP      

7879774

The recommend length does not work when select type MISUMI EPH-L ejector pin  

7879952

Edit Hinge joint will cause AF, which comes from change component               

7879979

While play,add rigidbody into RT-inspector from 3D view, its value isn't updated

7880136

KF ui_comp_selection not fetching global selected objects on initialization    

7880599

Group not be deleted after deleting the PEDPRO feature                        

7880631

[1]ugnx1200_8.2016110900Autotest Failure:+++ XML comparison failed              

7880675

Information of bend displayed by PMI is repeated                              

7880717

The knuckle HP stiffener isn't split after transition                           

7880776

Prod part does not become work part when we execute Design Ejector Pin         

7880796

Top assembly does not turn back to work part when we cancel Design Ejector Pin 

7880831

Should not use the seam curve from plate system to create transition result     

7880847

Rotate component functionality is not working for 90 degree rotation            

7880849

Modeler error occur and section view not generated                              

7880902

Wire-edm INTERNAL_TRIM tool path is wrong                                       

7880941

Setting of Dependent Files Save As option is not valid                        

7881219

Linux: O/S ERROR: signal  11 but no error with Win                              

7881586

CSE Error : Main Parser Error after reading CYCL DEF 241                        

7881637

Not of a valid type for reference set membership when edit positioning feature

7881648

In View Manager Navigator,open two top_part file will show an Internal error   

7881658

Reusable Object update incorrect when edit positioning feature                  

7881709

By calling NXOpen.UFUFViewCopyView failing to edit the lightwt section view   

7881729

[4]ugnx1101_9Autotest Failure:+++ Nodes in the master XML file are missing from 

7881737

Two curves should be deleted after PEDPRO feature created                      

7881760

Quality Dashboard Check-Mate Viewer only shows one check in Differences tab     

7881804

Fatal error when user change cyclic_type as Non-cyclic and export to scout      

7881886

Information of vertical lines can't displayed by PMI                            

7881931

Output of mom_current_oper_is_last_oper_in_program is wrong                     

7882760

The link body will be modified when edit a machine set or add a new machine set

7882819

Linked Datum Coordinate System for transition cutout should be hidden         

7882823

NX abort and back to gateway when user delete object source and restore snapshot 

7882832

Some decks can't be created when a boundary have an angle                       

7882833

Create Autotest failed with single part in the PEDPRO Function                 

7882875

Trim result of collar plate is wrong if its boundary plate is not fully load    

7882882

Check World failed with Assertion Failed after run Calculate Area               

7882903

Distance_sensors active no alter after changing active in operation and play   

7882912

Balloons disappear after closing components using (X) in the UI                

7882973

In runtime error,the error about snapshot can't delete                         

7882983

When make burring insert design ,there will be a error                        

7882996

Edit Glazing shade Banda, system will pop up assertion failed                  

7883115

CAM NX10 - FloorWallMill vs Journal - Settings Changing Unexpectedly            

7883137

Internal Error on doing Expression Debug in a new session                       

7883869

Direct Field of View Function create two features                              

7883873

Duplicate stiffener created at the same place and stiffener not finding boundary

7883876

Need to contain feature name with timestamp in the report                       

7883899

Wrong warning item in report                                                    

7883926

Preview of Oil Pan is incorrect                                                

7883946

Edit Design Blank function don't work.                                          

7883978

Expression is locked by the following part                                     

7884158

There is an object which depends on itself                                    

7884183

Theres no attribute in corner face created by corner design                  

7884186

[1]nx1101/tc10.1.7 TcinTest_IMP_PR7250116 remaster                              

7884289

[6]nx1101/tc10.1.7 TcinTest_MFK_FileNew_Suite1 needs tc spec remaster           

7884381

Fastener Assembly location  incorrect when change Start point from 0 to10     

7884583

Part cleanup deletes UDF when Delete Unused Objects is ON                       

7884649

Possible spelling mismatch for fonts in drafting standard vs. preferences       

7884781

Fusion odbc does not properly handle SQL_DECIMAL and SQL_NUMERIC data types     

7885096

Checkmate vda_multi_solids Multi-Solid Part fails for solids on layer 258    

7885118

Hull Stiffeners and thruster structure failed to transition                     

7885197

Face Color Management function can't box selection face                       

7885213

TBH on section boundary with thickness dir inside section transition to cache 

7885215

Can't check on/off all expressions                                              

7885230

Internal error when using the function MOM_load_definition_file in the TCL file 

7885270

Collision Violation appear when Tool Path Simulation in sim10                   

7885277

Scraps shouldn't be cleared after close Standard Part Management in Die Insert

7885324

Cursor focus lost when switch Type to Structure system                          

7885344

Circular reference when do Transition Deck_0 with seam through a cutout         

7885397

Pillar failed to transition                                                     

7885487

Some Brackets failed to transition                                              

7885509

[1]TcinTest_ReplaceComponent_PR7278098 +++ XML comparison failedchecked_out   

7885512

Component Properties dialog box does not remember last settings                 

7885667

Clone error: Attempt to write to freed object                                   

7885820

When inserting an operation the file memory usage grows until the w/s hangs     

7885891

SHOP DOC- Browse to an Output file-How to change file type listing options      

7886260

Pillar naming index not work in manager mode                                    

7886273

Assertion failed: Close Edit Child List Rule dialog and double chick packed Comp

7886299

Wrong judgment on the normal direction between plate systems due to cutout      

7886306

Edit color in Edit Child List Rule not update in NX1101,update in NX9034        

7886311

Duplicate linked body created for the same object during copy feature           

7886315

The range of master is wrong after changing the cyclic type                    

7886413

Error During Update when click Edit Pocket button                           

7886476

Fail to match the subsystem that is symmetric                                   

7886784

CAM NX10 - New Boundary Selection - Performance Reduction vs Member Selections  

7886810

In Replace Solid,the bounding box couldn't be created                          

7886853

In Sub-insert Library,it will show a message There is no visible component for 

7886869

Creating of Operations ,with internal IPW inside, takes too much time although  

7886989

Cannot de-select weld point solid body during creation                           

7887149

Onestep Trimline benchmark issues                                               

7887226

Trying to change UDE file through preference manufacturing configuration           

7887303

Custom Enterprise Identification not update a site selection field             

7887499

Manufacturing parts for Pillar (C-Beam with cap) cannot be created              

7887506

REG:Parasolid tag occurs when creating global shaping                           

7887516

Miss marking line for one limit bracket                                         

7887518

While re-select the physics object will cause an error and AF                 

7887523

Incorrect result when edit fastener assembly                                    

7887524

IE when user hide rigid_bodys parameter of object_source in runtime_inspector  

7887629

Internal error when select a blank in copy electrode function with using mirror

7887681

The result is incorrect in Delete Body/Component with more than two head body  

7887693

OM failed when user input negative value in time_scale and check world          

7887703

After operating for MCD , reopen the original file, close the NX will cause AF  

7887722

Cutout feature disappeared from the translated plate after run transition       

7887745

Support use cavity trim sheet first to calculate CATALOG_LENGTH for SIDE A type

7887751

SAW_MASS of manufacturing profiles which density is not 0.00000783 is wrong     

7887762

Reg:Operation should support change owner component in high assm_level          

7888359

Import into Tc  The value being set is not contained in the list of values  

7888482

Linear cam creation should give message when no movement                        

7888565

Plates are created in unexpected regions when select knuckled edge              

7888581

IE when user create display_changer for RigidBody in assembly and run simulation

7888731

No response when perform Specify Cutout after request is rejected             

7888739

Update view raises An attempt was made to decrement an already-zero ref count 

7888740

Feature Replay makes hidden layer to display                                   

7888803

AF after checking world when user change logical owner component in assembly    

7888842

NXship - attribute exclusion list not working for mirror body                   

7889003

Ship structure basic design - unexpected result after running CAE preparation   

7889043

About Point of support in NX ACIS Translator in NX11                         

7889163

Tool get removed during retrieve machine tool from library                      

7889264

Modifying a Tool inside Edit Machining Data Libraries is not possible - NX cra

7889755

IE:Change the axial vector in operation dialog,invoke operation dialog again    

7889810

Objects failed to save in product outline in NX11                              

7890086

NX10 and NX11  client crashes , in gouge check                              

7890345

Hole Table: Origin Point via Between Two Points, no hole selection possible   

7890402

NXOpen::Drawings::DetailViewBuilder::BoundaryPoint1 returns 0 for Custom type   

7890784

Internal errors pop up when deleting marking line for 4GD Reuse DE              

7890792

Serial number cannot update when the second time enter the rename dialog        

7890840

Failed to copy plate (Shape DE) and collar plate (Reuse DE) to multiple datums  

7890876

TcinTest_ReplaceComponent_PR7278098 fails with  *** EXCEPTION: Error code 352003

7890890

Failed to created bracket for modeler error                                     

7890897

The multiple choice issue about change owner component                         

7890908

Intersection seam between stiffener systems are unexpected                      

7890930

Fail to identify moldf face when define multiple brackets                       

7890978

AF when user add existing component in logical and refresh the logical model   

7891031

Wrong result of Special Piercing when ZC of part is different from simulation  

7891141

Unable to perform save as to new item id on specific part                       

7891270

TCIN: Stress Wizard File Naming                                                 

7891391

Length gets changed when editing a spline path created in older version         

7891456

Wrong display of thread length in hole table                                    

7891570

DxfdwgCreator.Commit method is not exporting model view as .dxf in external mode

7891678

The active of object has changed after restoring snapshot                     

7891744

Boundary Between Child and Adult value must be greater than start value       

7891797

Change in Jt file names in manage mode                                          

7891840

Ship Navigator autotest issues                                                  

7891850

Cannot make work part for the new added part node                               

7891934

Rapid move gouges not recognized                                                

7892014

Re-edit the edw_addendum section,click preview and there will be an error        

7892222

Overstock not included in Cableways Fill Percentage calculation                 

7892408

CAM:Execution of Divide by Holder creates two ramp angles for engage lamp     

7892560

Direction of stiffener section symbol is wrong                                  

7892567

No Machine Set type in Initialize Project function does not support Autotest  

7892836

Attribute of special piercing is wrong                                        

7892922

NX11 Feature Replay displays hidden layers                                      

7893202

Breaking API changes in Mechatronics in NX1101                                  

7893211

Breaking API changes in STLCreator in NX1101                                    

7893222

Breaking API changes in Tooling in NX1101                                       

7893224

Breaking API changes in Diagramming in NX1101                                   

7893300

Unable to open the Layout Drawing                                               

7893778

An warning Invalid part tag will show when you cancel select Concept Design an

7893820

Error occurs when edit the Vision Planes feature                               

7893912

Reg: Set Height Above Road to 200, rear  Crash Barrier location is error     

7893952

Internal Error when delete shim                                                

7894009

Number of selected body cannot be modified in Initialize function               

7894309

Required attribute is breaking save-as-new-revision dialog in NX                

7894559

Rapid Dimension message Input is Wrong                                          

7894568

Valid expressions containing temperatures return unexpected errors in dialog    

7894828

Operation of NX11 is stopped when executed Convert to PMI                   

7894860

Add Apply and Reset button to Process Description                        

7894956

Reference line naming clarity                                                   

7894969

Select an object and find in navigator can't switch to the correct navigator  

7894973

IE when user export special cam_profile to SCOUT and import back as same cam    

7895030

Project plane position by mesh calculate result does not correct                

7895070

Some issues about translations in NX11 Chinese version                        

7895078

NX11.0.1 L10N CERT: Un-externalized strings in Signal Adapter dialog            

7895104

Polygon body display is incorrect                                             

7895129

NX11.0.1 L10N CERT: Un-externalized strings in General Relinker dialog          

7896039

Mom_machine_time gives bogus machine time when max rpm option un-check          

7896074

Report this Column does not work with DE Properties                             

7896136

Shape of Fill created by Curve does not match the defined line                  

7896186

Fail to create Fill by curve when specify four points in 4GD mode               

7896245

Apply Use-existing Action to All Read-only Components doesn't work           

7896306

Quick CSYS update and display incorrect                                         

7896368

Initialize Project don't work if theres no opened part                        

7896370

Attempt to add a component to a part flagged as a piece part when click      

7896374

[QA] Cannot open prt file by internal error                                    

7896457

Projected face geometry isn't correct after changing tolerance                   

7896512

Error reading image data when edit the Custom Symbol                            

7897085

[1]Modeling ugnx1101_9.172 Autotest Failure:+Child nodes from master XML file

7897406

Regression - UF_UI_update_listing_window has no effect in NX11                  

7897422

UI of curve method has changed after click apply                                

7897609

Select operation created with Paste with Reference gives Memory access violation

7897676

Port and Starboard will be replaced by In and Out after the bracket is created  

7897839

Drawing part flagged as modified after opening pop up menu via right click      

7897891

Internal Error pops after delete duplicated Default Group                       

7897908

It will show an Assertion failed when you finished some special steps          

7897920

In Local Untrim and Extend,it will show an Internal error when you moved the V 

7897942

In Cooling Circuits,it will show an Assertion failed when you select another two

7897970

Memory consumption seems to increase as list of weld joint Increase             

7898250

[15]Internal Modeling ugnx1101_9.172 Autotest Failures:Nodes differ : original v

7898305

Cannot Select One Side of a Plate when creating a Point Request Pen Request     

7898547

[3] TcinTest_4GD_SaveAsRevise_SmartSave_Suite2 tests failing                    

7898590

Only a small part of attached structures show in view                           

7898595

line front becomes bold after edit the shell expansion feature                  

7898618

The problem that cannot be open UGPART by Open With                         

7898728

Extracted/linked body does not create using copy solid function                 

7898729

In Component Drawing,Internal error appeared when you open the component in Asse

7898794

Symmetrical display is wrong when view direction is AF                          

7898806

Internal error occurred after EWR Face Blend                                   

7898837

Ship attributes didn't add to several faces after doing plate preparation       

7898838

Standard part type collar plate are always displayed in solid line              

7898867

Reg: Eyellipse - A syntax error occurs when set base data source              

7899113

Deformable Routing Component: Assembly constraints gets broken                  

7899233

[8]Internal Modeling ugnx1101_10 Autotest Failures:Nodes differ : original value

7899505

Edit the updated Joint Mark but its CSYS doesn't update to latest               

7899640

Contour Profile Step over moves plunges into the material                       

7899686

Post Builder outputs tiny Error difference on Y and Z locations in NX11        

7899724

Clearance shouldn't be created when select punch as offset side                

7899991

XML out prints multiple labels for reference line that is splitted                 

7900215

IE while mirror a TBH                                                           

7900729

Cannot edit the Arowhead to Filled                                              

7901237

Match Edge dialog of NX11 displays the value of G0 in meters ( not in mm)     

7901463

No Alerts about Fill pop when delete the comp of Fill                           

7901646

Add a new curve path set but Rediscover button appeared in UI                   

7901908

NX9 and earlier material definitions result in property mapping errors in NX11  

7902163

There will be an error when using the one-step                                  

7902272

Inconsistence behaviour of update all on editing the coordinate system value 

7902303

Internal error when Mirror ship structure                                       

7902321

Assertion failed on Close NX after Fail to create weld Fill                     

7902324

The specified direction disappeared after change Angular_Spring_Joint owner comp

7902523

1101(4):Pre Proc-SIM:CaeTest_FieldInterpol_jat:XML Differences                  

7902702

GRIP EDA &ATTVL ignores IFERR label and shows misleading error code 512008      

7902909

Deformable Hose Misbehaving                                                     

7903184

Export fails on Define Naming Rule/Rename large assemblies over 100 components 

7903208

NX 11.0.1 L10N CERT: Unexternalized strings in Drafting Preference              

7903220

Different View Manager menu in customer default of MW and PDW.                  

7903259

Ugmanager_clone fails with error ERROR: 3025001 - The Clone operation has not

7903296

Wrong result of super offset for overlap and some scraps                      

7903411

Output Directory function don't work in Set Component Names of Cooling Fittings

7903446

The overbend in NX9.0.3 is different from NX9.0.2                               

7903506

Specify Vector block has been reset add Fastener Assembly                       

7904289

Error message not clear in the Pedestrian Protection Function                 

7904391

Wrong result of Intermediate unform                                             

7904409

[1]ugnx1200_10Autotest Failure:+++ Nodes in the master XML file are missing from 

7904426

[1]ugnx1200_10Autotest Failure:+++ XML comparison failed                        

7904695

Reg: Cannot create/move expression under Default Group                          

7904718

The toolpath has some sharp corners that did not previously exist               

7904920

Deformable Parts does not work anymore                                          

7905000

UF_UI_save_listing_window creates blank file     

7905004

Fatal error Set Work Part in Sheet Metal  if comp part was saved in Drafting    

7905089

Toolpath divide by  holder created  gouges that crash at machine                

7905237

TC3.2.9- No Weld Characteristic output for User Defined Weld in new Validation

7905351

[1]ugnx1101_10.2016121200Autotest Failure:+++ XML comparison failed             

7905352

Some CollarPlate fail to mirror                                                 

7905400

[1]TcinTest_IMP_t115 EXCEPTION: +++ XML comparison failedprecise_reprev_state 

7905448

[1]+++ XML comparison failed:Attribute                                       

7905451

The internal error when switching create parting surface method in Design Partin

7905467

Reg: When import the reusable object to TC the legend image work incorrect      

7905472

File open dialog or add component dialog suddenly use wildcards in NX11     

7905473

Can't drag & drop part to assembly if another version of the same part is already 

7905513

Edit Context Attribute in Ship Basic Design is not changing attribute           

7905574

Create Component Pattern option work incorrect in the assembly context          

7905580

A40 was not recorded after back and next with JUN1997 revision                  

7905583

The thickness of CollarPlate no equal to Plate thickness                        

7905726

Preview no update after change the direction for Plate System                   

7905730

1102(1):NASTRAN sol:CaeTest_ufunconverted_nxn_solve1_jat:ResultsValidation Diffs

7905753

Issue in KRUNAV_check_repalce_pts_template,KHC_TE_do_template_explorer          

7905889

1102(3):Pre Proc-SIM:CaeTest_FieldInterpol_jat:XML Diffs                        

7905914

Licensing change prevents parts in some folders from loading                    

7906154

Undesired breaks in Listing Window during program execution                     

7906207

[1] Modeling ugnx1101_10.181 Autotest Failure:*** EXCEPTION: O/S ERROR: signal  

7906210

[1] Modeling ugnx1101_10.181 Autotest Failure:Nodes differ : original value False

7906337

Profile Cutout function not making linked bodies for some profiles              

7906501

Edit Context Attribute loaded all parts                                         

7906530

Tool position error when Sim09 turnmill sample run tool path simulation         

7906536

[1]ugnx1101_10.2016121300Autotest Failure:+++ XML comparison failed             

7906546

[1]ugnx1101_10.2016121300Autotest Failure:+++ XML comparison failed             

7906553

[1]ugnx1101_10.2016121300Autotest Failure:+++ Null tag                          

7906554

[5]ugnx1101_10.2016121300Autotest Failure:+++ XML comparison failed             

7906579

Internal error occurs when create Glass Drop feature                           

7906653

Collar Plate not matched the Stiffener                                          

7906848

PLMXML file not referring JT files from disc on Linux                           

7906852

stpx file not creating on Linux                                                 

7907022

Date type attribute cannot export to XML file by the new Validation Tool        

7907170

LD: rename function doesn't work properly                                       

7907447

Welding characteristics inherit setting fails to hold value                     

7907450

Gone through too many interactions when attempting a Constraint w/partial load   

7907635

The Type of TTB Collarplate cannot display in Ship Section Drawing              

7907742

Move part does not deform flexible hoses correctly                              

7907818

IE when define TBH with an offset                                               

7907864

NX internal error alarms when generating operations and when changing stepovers 

7907919

Both Direction On Reference and Primary on Reference are not work               

7908426

Importing Ideas symbol raises an Internal error                                

7908642

Restore the snapshot will cause the unknown error in runtime error dialog     

7908718

Direction arrow disappear after change the direction options                    

7908719

Some arc weld features failed Publish if the linked face changed to Position Ind

7908864

Selectable region lost after modify the offset                                  

7908874

Enhancement: Support smart filter in reuse library navigator                    

7908994

Native UDF-ReUseLibrary in managed NX11, no native Library is visible           

7909237

No solid type export to XML file for BIW Locator by the new Validation Tool     

7909265

No linefont and width export to XML file for Welding Joint by the new Validation

7909288

No any info exports to XML file when Welding Joint created by New Component     

7909755

The window couldn't be change after canceling Electrode Drawing.                

7909925

In Part Name Management,the serial number wouldn't show in the top_part        

7910061

Internal error appearing after clicking Part family tab in NX                   

7910616

[5]ugnx1102_0.2016121900Autotest Failure:+++ XML comparison failed              

7910637

[2]ugnx1102_0.2016121900Autotest Failure:+++ XML comparison failed              

7910642

[1]ugnx1102_0.2016121900Autotest Failure:+++ Could not find object with name SK_

7911096

REG_NX1003IP5: Series of Assertion error while using Trim Angle Check          

7911129

Not possible to add sketch dimension in clip section view                       

7911145

File corrupted, impossible to delete the last feature       

7911393

Nx Fatal Error - Standard C++ exception caught       

7911404

If no active node is set plate system does not show in navigator                

7911679

[1]ugmgr_MCD_t16 Nodes missing AttributeInformation                             

7911840

Result of uniform/User Defines display in CheckWallThickness are different      

7912058

In Unused Part Management,it shows an wrong result through some special operation

7912183

Bracket created with wrong cut                                                  

7912303

Session.ApplicationSwitchImmediate puts UI in unusable state easily             

7912633

The height of Initialize Electrode Project UI will been changed when click apply

7912661

[1]ugnx1100_33_mp4Autotest Failure:+++ XML comparison failed                    

7912681

Assertion Failed when create Initialize Project in Mold Wizard                   

7912705

Need to support the ACTION: REFER and TCE_CLONE, defined in the cooling_reg.xls

7912725

Exclude sharp edge display is wrong in Check Wall Thickness function            

7912789

When there is a flat pattern view it is not possible to create projected views  

7912827

Pillar doesn't show in view                                                     

7913038

NXTOOLS/GRIP &ATTVL reports error 512008 with IFERR label                       

7913421

Mirror Obstruction Ratio is wrong and Ratio decrease although obstruction increa

7913586

Support to add false body in quick CSYS pattern of family part in Pocket     

7913779

The value of Segment Length export to XML file is wrong by the new Validation To

7913990

[2]ugnx1102_0.2016122200Autotest Failure:+++ XML comparison failed              

7913993

The Axis Type of SpringDamper disappeared when we edit SpringDamper           

7914017

Display incorrect when select the Show Shortcuts for the Add Points block     

7914102

Wrong preview and reference set about user defined relief                     

7914323

Cooing part family instance position is not correct if converted from symbol    

7914335

[2]ugnx1102_0.2016122600Autotest Failure:+++ XML comparison failed              

7914371

H17 can not be changed in Hand Reach Function                                

7914377

In Part Name Management dialog,appears a warning message The folder            

7914450

Reusable component update incorrect When to replace a component in pattern      

7914455

Views are out of date after just changing display window                         

7914588

Model View of JT created from NX does not have PMI                              

7914840

In Cooling Circuits,it shows an Internal error through some special operations

7915325

Passenger position should not associate with Driver SgRP point                  

7915412

NX Layout - Move Object command causes already constrained component to move  

7915539

ExecuteQueryForCount NXOpen API method takes much longer than in previous NX MP 

7915713

No information for Surface Weld  export to XML file by the new Validation Tool  

7915817

Error opening assembly - UPDATE/DELETE has gone through too many iterations     

7915960

Fatal Error during Assembly Loading (failed to reopen stream)                   

7915991

When move mouse to add loading button there should has a message:Add new loading

7916078

Mold Wizard Stock Size UI doesn't restore individual Clearance values         

7916310

Working Comp still exists under the asm tree when choosing no working part type 

7916312

Center points of opening filling line for some tank are outside of tank         

7916313

Editing relief that doesn't have corner and has been copied, IE will popup     

7916419

Enhancement: Support default libraries order when switch to MW/PDW application  

7916594

Striking points of opening filling line is not good for some cases              

7916626

Edit Parameters of Move Object Feature loses Rotation Origin                    

7916724

Part Attribute cannot be deleted, hidden cached reference                     

7917178

NX crash when there are more than 100 subsequent XY Points in the edito         

7917248

After edit operation and edit subsequence node will cause an error and AF      

7917643

Internal error when create section view                                         

7917669

The value of axis about speed is wrong in operation after select transport_suf  

7917676

Tool path generation raises internal error                                      

7917729

Wrong Electrode Z_OFF_DISTANCE if MSET CSYS not aligned with WCS                

7917746

In Electrode Drafting,select Use Instance will appear some displayed issue   

7917788

In Direct Channel,it will appears some displayed issues through some operations

7917915

Duplicate Attributes stored and displayed for part when loaded structure only   

7918254

Fatal non recoverable error from PK_BODY_imprint_body                           

7918442

Plate region not work                                                           

7918674

Internal error,Close top part,Operating Initialize Project function            

7918703

When editing Bounding Box appear an extra solid in Replace Solid and Trim Solid

7918713

After Hide/Show and Suppress/Un-suppress,Demo Cylinders disappear                

7918745

No warning message shows up when selecting conflict face in Copy Electrode      

7918773

Placement block display incorrect when toggle on/off Create Component Pattern 

7918781

Cannot create sub-insert part with an error                                     

7918796

Hide line displayed after un-suppress the Hood Visibility line feature          

7918810

Change the parameters pattern components update incorrect                       

7919275

[1]Modeling ugnx1101_11_delta_1 Autotest Failures:Nodes differ : original value 

7919279

NX 8.5 Structure part loads as modified in NX 11.0.0                            

7919654

Crash saving prt-file after deletion of a UDO Turning operation in NX11         

7919693

Check-Mate checker Update All Features ignores the Log Option setting           

7919726

Toggle off show point doesn't work in the Bumper Function                     

7919763

Type is Traverse by not normal work in the assembly of Patch Surface         

7919768

Change Stock Direction will lost the preview                                    

7920005

Wrong result of Special Piercing when ZC of part is different from simulation

7920117

Positioning Feature can't change the location when toggle on Use Face Center    

7920211

DIMPAR does not change the arrow size of the label                              

7921107

IE shows up when creating pocket after delete one of the pattern component      

7921196

Wrong result of Cutting Areas                                                  

7921299

Feature2Cost Stamping function appears an display error                       

7921424

Effectivity time changes after opening part                                     

7921516

To Focus Select Curve when Until Extended/Selected  is used                 

7922086

There are two errors, when set Resolution to Customized                        

7922120

NX CRASH when creating pocket after click show target & tool bodies option twice  

7922296

Reference part name not normal work in Part Name Management of Ejector pin Post 

7922411

Selection group could not record creating select faces                        

7922493

Switch in Reuse Library the revision of members by using Teamcenter Revision not

7923010

Output group issue from Solid from Shell meshing                              

7923342

Internal error,Rename Universal sleeve elector pin in Ejector pin Post Processing

7923365

Collar plates are failed after split the parent plate                           

7923402

Some issues about Burring Insert                                                

7923430

Glazing Shade feature cannot be suppressed and have assertion fail              

7923457

When moving the relative coordinates, design ejector pin position is wrong    

7923467

Cannot change V1 point in the Windshield Datum Points feature                  

7923513

Features name should not be changed after re-selecting a same loading           

7923514

Position of PMI information for Auxiliary is not appropriate                   

7923545

Change Optimization type will cause NX stop working                            

7923602

Error when defining a kinematic chain in a kinematics model                     

7923646

Create Component Pattern incorrect if drag/drop to the origin CSYS              

7923778

Reusable component position incorrect when using quantity in each operation    

7923969

UDE-data not loaded after changing manufacturing configuration within NX session

7924253

[1]Modeling ugnx1102_0.204 Autotest Failure:Nodes differ : Different number of a

7924555

In Design Ejector Pin,the symbol you build couldn't be edited if you build other

7924563

Loading update issue in the Bumper,Vision Planes and Windshield Datum Points com

7924606

Can't reverse direction when drag/drop the external KE-Part to CSYS             

7924651

Click Reverse Direction first time not work when toggle off Create Component

7924666

In Electrode Drawing,the Use Instance couldn't work as usual through some spec

7924682

Modeler error while create bracket with size=D                                

7924726

[1]ugnx1102_0.2017011101Autotest Failure:+++ XML comparison failed              

7924766

One step customer default in PDW is useless                                     

7924942

IE: click the save search in the ribbon                                         

7924949

Wrong result of Entire Uniform                                                  

7925366

Problem with deform of flexible hose while move part in routing                 

7925885

IE while double click linked body after create CAE Prep.                        

7926079

REG: Incorrect operation when change the positioning features location         

7926091

Drag/drop PTS template to CSYS not support undo/redo when create CSYS pattern   

7926117

Unused Part is not listed,no list of all Closed parts in Unused Part Management

7926127

Incorrect result when edit positioning feature                                  

7926227

Result error when drag/drop usable component to pattern positioning feature     

7926252

View not shown in sheet if change front proximity when create section view      

7926368

Regression with font file regarding case sensitive preference                   

7926375

CUTCOM differences when posting in NX10.0.2 and NX10.0.3                        

7926436

Error: the objects selected for edit have changed such that the dialog must close

7926452

Holetable is not working                                                        

7926602

Assemblies load performance in NX11 vs NX8.5                                    

7926808

Copy of Subtract Fails  if Interpart link exist                                 

7926828

Transition does not create correct topology for planar part on a datum plane    

7927106

Constraints marks can't be used to identify/edit the strings & constraint faces 

7927110

Result error when drag/drop reusable object on different node in assembly       

7927284

Operate Delete Suppressed Parts in Assembly function,an error,the UI shut down 

7927347

Cannot modify workpiece body if turn on Rename component option                 

7927388

Sheet body should not be pre-selected at the first time use Initialize project  

7927558

1102(5):Post Proc:MULT:ResultsValidation value Diffs                            

7927895

NXTOOLS/GRIP &ATTVL reports error 512008 with IFERR label                       

7928312

Standard should not hide, when set Requirements to User defined                 

7928325

Eyellipse could not loading when first invoke Vision Planes command            

7928414

Replace solid function cannot be used if bounding body dialog is opened         

7928415

[2]ugnx1200_11Autotest Failure:+++ XML comparison failed                        

7928424

[1]ugnx1200_11Autotest Failure:+++ XML comparison failed                        

7928458

After changing value of Pedal Reference Point,new point was generated but the pr

7928469

Passengers points was generated,even if the data of passengers was deleted      

7928570

\227Show Interval Areas Crosshatched\231 option in \225Stone Impingement\226 command cannot

7928630

Mirror obstruction ratio output is error                                      

7928885

Import Assembly into Teamcenter failure                                         

7928912

Cut Region Divide followed by an Undo displays a General Fault error            

7929608

Internal Error when insert Slug Hole by selected sketch                       

7929906

H17 mark should be disconnected after editing and using HPD to define points     

7929956

Links disappears after re-naming it from PNT                                

7930068

Internal error when using edge blend and quick CSYS function                    

7930695

REG: Null tag not allowed warning When toggle off the Create Pocket         

7930724

Find Intersections Automatically can't remember when add component            

7930824

Need to refresh to display in member select area when the item not have UG maste

7930833

Copied geometry does not pass selection filter in Bead on 4GD mode              

7930946

An Internal error that memory access violation appeared throuth some special ope

7931152

UF_VIEW_set_center() is not wrapped correctly for .Net                          

7931182

Incorrect object for this operation when use to be joint mark function        

7931230

Not possible to update section view of component                                

7931356

Java environment error after upgrade to 8_121                                   

7931360

Unable to open assembly in NX11                                                 

7931843

Proximity isn't working when create specify plane section view                  

7931893

NX/KF has not been initialized yet error occurs while try to open the assembly

7931978

NX crash when user delete the WriteDevice and restore the Snap_shot             

7932006

Failed to create the pocket pattern when Drag/drop component to CSYS pattern    

7932068

Process Description don't update Orientation of text                          

7932128

REG: Internal error when drag/drop reusable component to positioning feature    

7932131

Open assembly fully results in fatal error                                       

7932136

Weight issue in Ship Design                                                     

7932171

Copy & paste basic design drawing view across sheets leads into update failures 

7932179

Result error when delete reusable component                                     

7932450

NX9 Flat pattern view fails to be added in NX11 Drawing                        

7932986

Reusable component update incorrect when toggle off the Use Inferred Constraint

7933031

Reusable component update incorrect when click the Reverse Direction button 

7933043

In the special case, Cooling Circuits function operation, Result error         

7933050

NC:Create signals from operation will cause AF                                

7933053

Unfolded Minimum Rectangle load all parts                                       

7933055

Wrong result if create a cooling circuit start from the middle of channel       

7933074

Change Planar to Spherical, Instruction field in mirror ratio is error         

7933082

Changed Pitch when creating Strip Layout, the Pitch isn't changed              

7933102

The property value in Runtime Expression should not be translated              

7933124

Object supplied is of the wrong type when edit the datum coordinate(2)      

7933150

NX does not read the correct baffle cooling fittings from the register xml      

7933156

Region of stiffener generated from mirror is changed                            

7933228

Both delete the RigidBody and its children CollisionBody will cause NX error    

7933245

IE occurs when change Instruction Field Position in the Mirror Certification  

7933273

Edit all-around Vision feature,Window Geometry does not be recorded            

7933276

A deleted or invalid class id was used when copy to multiple locations          

7933349

One edge of plate didn't show in expansion view                                 

7933507

Wire Edm missed LOAD-UNLOAD Wire Events                                         

7933655

Internal error when add reusable component and click back button              

7933750

PTS does not show datum CSYS                                                    

7934327

NX Motion Simulation Recurdyne Solver Extremely Slow; Unusable           

7934344

ROTARY FLOOR- divide by holder linking moves have incorrect tool axis          

7934414

NX crashes when executing Run Optimization                                    

7934425

Change Rotation Angle in Mirror Joint Mark have wrong result in NX graphic window

7934477

[1]ugnx1102_1.2017012300Autotest Failure:+++ XML comparison failed              

7934526

Internal Error when using Entire Unform and P2P constraint for attached part   

7934554

Loading displaying in dilog is wrong and not consistent with a used loading     

7934611

Cannot avoid the Model Setup Check Error                                  

7934749

Tripping Bracket is created with wrong shape                                    

7934803

A default Revision Rule can't be set in Reuse Library ( Classification)         

7934878

[1]EXCEPTION::+++ XML comparison failedLinked_Feature=Angle Measurement       

7934881

[5]TcinTest_PID_DeapSupport_Suite5 +++ Could not open master file               

7934941

CSYS, PLANE cannot be used as input in PTS Author (integrated)                  

7935176

CAM11087: CP NX459043 causes 7 autotests to fail with XML differences           

7935536

Excel Automation Error when editing Tabular Note using Spreadsheet              

7935647

In Cooling Circuits, the Set Component Names works abnormal                  

7935671

Change base data loading, Blind Volumes Validation does not update           

7935680

Assertion when create annotation again after modify the view                    

7935684

Change is not saved when switching different BOM template                       

7935727

AF:Use the method of Face/Plane Normal to choose surface                      

7935767

General wave re-linker does not show link browser in top assembly               

7935798

Wrong result of Pocket if turn on component pattern after show target only      

7935876

Broken links happens while update the grid part                                 

7935918

Pocket function operation,The multiple Linked Body features merged into one    

7935986

Unable to save simulation file to Teamcenter                                   

7935992

Hole Table doesn't show all holes in the drawing                                

7936041

Only the copied components on the first to position can be created successfully 

7936228

[1]Modeling ugnx1102_1.215 Autotest Failures:Nodes differ : master-curve  ModlT

7936231

[1]Modeling ugnx1102_1.215 Autotest Failures:Nodes differ : original value 16   

7936234

[1]Modeling ugnx1102_1.215 Autotest Failures:Nodes differ : Different number of 

7936239

[1]Modeling ugnx1102_1.215 Autotest Failures:Nodes differ : original value 3    

7936403

Editing groove DF in 4GD gives error for missing faces                          

7936440

Cannot select the guide curve when back to its page from Settings               

7936460

Journal uses different licenses for playback compared to interactive NX         

7936461

Cannot Next to Review page to complete the weld point creation                  

7936914

No open Mold Wizard application, View Manager Navigator function can be used   

7936988

Linear dimension become corrupted after attaching angular dimension to it     

7937094

Part Cleanup with Delete Unused Objects deletes suppressed features             

7937358

Qualify Sketch (shipbuilding) does not call correct spreadsheet                

7937386

[1]KDa ugnx1200_11_parasolid_30.0.901 Autotest Failures:ErrorMessage: Test raise

7937826

NX Optimizer, Global Sensitivity Two types of Spreadsheet management        

7937923

Drawing shows incorrect value of Linear Vertical Dimension                      

7938050

EXCEL always error message 80010105 and 800401 warning failed to.0X80028018     

7938070

NXOpen SignJar or executing signed JAR fails with Java 1.8.0_121                

7938845

1102(1):PreProcSIM:bcc: GetIsLoadGroupAllowed toggled to false                  

7938847

1102(1):PreProcSIM:LRG_Bcfem: SimSolution.GetAbstractionType lost               

7938997

1102(2):MAYA Trans:MULT:SimSolutionStep value Diffs                             

7939127

Error - Could not find schema transmit file when opening PTS assembly in 11.0.1 

7939719

NXShip - Unable to split migrated profiles using Split Ship Structure.          

7939976

The behavior of KF subString() for Japanese string is different in NX10 & NX11

7940176

Cannot open older NX parts in NX11.0.1                                          

7940308

Error - Could not find schema transmit file when opening PTS assembly in 11.0.1 

7940427

ugtopv: ERROR 1600 line [7183]: [UFX_MODL_ask_mass_props_3d returned error code 

7940430

DWELL is not triggert at Back Csink operation                                   

7940830

NX10 CAM - Tool path visualization cannot be stopped                          

7941332

NX12IP12:Performance suit showing increase in time for some of cases            

7941333

Wrong UGPART-Datasetname, if using Reusable Part with inline cloning           

7941418

Source: [1] Drafting NX1102_IP1 parasolid 29.1.214: Autotest Failure: XML Diff  

7941494

[CAD]Behavior of PMIs Orientation CSYS is different for NX 8.5 & 10          

7941522

Hole Table not working correctly                                                

7941547

1200(2):Motion_RD:CaeTest_motionU7Solver_jat:NXOpen.Motion.MotionSolution Diffs 

7941552

1200(1):Motion_RD:CaeTest_motion_RD_solve2_jat:NXOpen.Motion.MotionSolution Diff

7941743

1102(2):MPost Pro:CaeTest_motion_postprocessing3_jat:NXOpen.Motion.ResultMeasure

7941864

[1]KDa ugnx1102_1_parasolid_29.1.214 Autotest Failures:Nodes differ : original v

7942145

Unable to switch to Drafting application for a certain prt file                 

7942497

Capture Studio image flips / reverses the background scene                      

7942597

NX fails to execute signed NXOpen.Java JAR using Java Update 1.8.0_121          

7942667

CAM: memory access violation when clicking on operation                         

7942914

[1]Kda ugnx1102_2.2017020100 Autotest Failures:Nodes differ : original value 115

7943503

Wrong result of Bending areas                                                 

7943699

1200(1):Response Anal:CaeTest_rs_enh_jat:AfuData value Diffs                    

7943848

Post Builder - error when adding custom command to event                        

7943893

Electrode Design Multiple Sparking Positions only creates one transformed blank 

7943999

NX Sheet Metal model in assembly freezes after Edit Flange                      

7944118

[1]Kda ugnx1102_2 Autotest Failures:Nodes differ : original value 29433.08026511

7944260

DXF layer mapping are not maintained when opened in Autocad                    

7944470

Positioning Feature and family part is not the same parent,support pocket      

7944517

If the part existed analysis data, analyze it again, the result is wrong   

7944735

PDW - Request for a smaller  Customer Default value for Shim Profile Offset     

7944844

No edit reusable component MB3 menu in the PTS DE                               

7944855

TNC, drill parameter Q202 interpreted wrong in cycle 200                        

7944901

[1]TcinTest_Save_PR7767851 +++ XML comparison failedObject(ItemRevision)      

7944915

Error is displayed on saving  new .prt file as .stp file                        

7945037

[4]ugnx1200_12_parasolid_30.0.113Autotest Failure:+++ XML comparison failed     

7945143

Java Error when calling Realtions Browser with Update 121                       

7945212

Graphics view is not updated after promote body is deleted in NX                

7945709

Disappearing text in PMI using custom symbol with tabular notes                  

7945833

In Bill of Material,the Hide List will wrongly switch to Bom List by some op

7946042

Migrate the dimension tree enhancement(allow edit even locked) to NX11.0.2    

7946063

Edit eyellipse feature, system will popup error message                        

7946364

Make unique makes NX session corrupt (Internal error: memory access violation)  

7946401

NX session crashes when adding base view to drawing                             

7946612

NX 11.0.1 Maintenance update causes Electrode design Multi Spark function fail  

7946822

A Transform Case recorded by new Validation Tool is failed in NX12              

7946860

NXMGR:  ug_ip_menu_export_step is not found in the database                     

7947141

Global Shape by curve - start flat vs curve line                                

7947276

In Direct Channel,it will cause two display issues through some operations    

7947339

[2]ugnx1102_2.2017020700Autotest Failure:+++ Update not protected in JA call Cre

7947463

[1] Drafting NX1102_325: Autotest Failure: Drafting auto-tests failing XML DIFF 

7947693

[11]nx11mr/tc10.1.7 import tests  +++ XML comparison failedObject(UGPartAttr) 

7947760

Pillar Point for new created PillarSystem failed to create when running CAE Prep

7948014

When there is a flat pattern view it is not possible to create projected views  

7948964

Internal error when add points in the edit positioning feature dialog           

7949091

1102(1):Pre Proc-SIM:CaeTest_bcc_jat:SimSolution value Diffs                    

7949102

Error during update when add reusable object and add points(arc center)    

7949248

Some plate systems are fully load when use Unfolded Minimum Rectangle           

7949269

Wrong result of Entire Unform for attached case                                

7949324

Windshield Vision Zones didnt record windshield face                          

7949361

Importing STEP, turn ON Flatten Assembly, ItemID is assigned to components 

7949800

KF function ug_deleteInstance unavailable without NXSHIP license as of NX10     

7949867

REGBB : Components from Reuse Library are not displayed                         

7949920

Knowledge fusion will not launch                                                

7950198

[1] ugnx1102_2 Arch Autotest Failure Macos ONLY : could not load library libshap

7950305

NX1101 OneStep Entire Unform regression                                         

7950347

NX1101 One-Step Trim Line issue                                                 

7950377

Omnicad functionality will not work on cloned virtual machines                  

7950585

Default value for toggle Default Element Size should be on according FS       

7950587

Internal error when mirror seamed hull stiffener systems                        

7950643

Enhancement for user defined punch and slug hole                                

7950662

Internal error while transition plate systems                                   

7950670

Highlight is not removed while delete node                                      

7950749

Proper alerts should display when the input element size is smaller than 0.0mm  

7950756

2D Mesh Collectors created wrong for plate subsystem                            

7950840

Category of new added attributes for HP are wrong in both basic  and CAE part   

7950929

Use tool bodies on invisible layers option meaning will lead to misunderstanding

7950940

FEM model fail to update after modify basic design model and CAE Prep model     

7951044

Error during update when change the align to face normal in quick CSYS          

7951079

AF when Use the quick CSYS function.                                            

7951084

NX:  Angular Dimension Extension Line on Section Line in Detail View            

7951107

When Initializing a Project in Managed Mode, MW hangs after creating Cooling    

7951497

Attempted to set invalid part to be the work part failing to add template assy

7951633

Baseline Generated Dispatcher Tasks get Cancelled for unknow reason

7951763

The number of reusable component update incorrect when switch to the clone   

7951859

1D mesh collectors are created wrongly at the second time                       

7951944

[1]ugnx1102_2.2017021000Autotest Failure:+++ XML comparison failed              

7951951

Units do not match warning and expressions failed to update on MW assembly    

7951991

Can't get ExportMeshProperty of NXOpen.CAE.Mesh objects                         

7951998

A severe error occurs after un-suppress Hood Visibility Line                   

7952004

Auto Mesh for new added CAD geometry failed                                     

7952055

Bracket size didn't change with stiffener size when its driven by stiffener size

7952178

In Work Piece:it will shows an Assertion failed through some special operations

7952272

Put file to the recycle bin function does not work correctly                    

7952696

AreaMill Cut Regions Collision Preview is Incorrect                             

7952736

CAE Preparation part fail to update if deleting some stiffener systems          

7953235

[1]ugnx1102_2.2017021300Autotest Failure:+++ XML comparison failed              

7953253

1D element update wrong                                                         

7953254

Performance issue: takes 1 hours to copy 38 parts to 18 frames                  

7953372

2D MeshCollector should be controlled by Plate Thickness+Material+Material Grade

7953393

IE occurs when edit the legacy Point Measurement after parent deleted         

7953407

Error occurs when change different moldbase types and also disables its function

7953427

KF function nxship_askTCPartRev not available without NXSHIP license since NX10 

7953492

Excel automation error COM error code 80010105                                  

7953808

EX: ApplicationSwitchImmediate() causes NX to enter recursive loop of errors    

7954354

Connected Face Finder needs to work on non-retained welds                       

7954483

ElementTranslateBuilder has no method to get newly created Mesh objects         

7954520

NX11 crashes in managed mode if Revision and Name attributes are invisible    

7954742

[7]ugnx1200_12.2017021300Autotest Failure:+++ Get date on  failed, ifail = -1   

7954784

[1]ugnx1200_12.2017021300Autotest Failure:+++ Error creating body of feature Li

7955310

Machining Knowledge Editor does not support vector and point UDE attribute     

7955769

Response Sim input function different than the input node response              

7955971

Builtup stiffener is missing when create expansion view                         

7955972

Weld Point can be selected twice in Weld Advisor in Customer Part               

7955999

When edit feature,Show Interval Areas Crosshatched will be toggled off          

7956015

Bracket in another view is also annotated when select bracket by rectangle drag 

7956032

Filter type display incorrect when switch classification to general lib         

7956159

Internal error while mirror plate system                                        

7956208

Stitch edge pair data get wrong result for special case                         

7956223

Collar Plate size are not update while copy                                     

7956237

The result of bounding box is incorrect when selecting an object in an assembly 

7956246

STEP214 Export with PMI fails with IM0522 Un-handled exception                 

7956261

1D element (Edge Reinforcement) offset value should be matched with CAD model   

7956272

In Feature2Cost Molding,it will shows an IE through some operations            

7956293

In Feature2Cost Molding,it will shows an AF through some operations            

7956339

Groove runs not over three faces                                                

7956394

Profile Cutout read the incorrect tightness of its target plate system          

7956581

[10]ugnx1102_2.2017021401Autotest Failure:+++ XML comparison failed             

7956592

[2]ugnx1102_2.2017021401Autotest Failure:+++ XML comparison failed              

7957333

Run_ugtopv.bat aborts on failure                                                

7957606

Part failed to mirror when selecting multiple parts                             

7957808

CAM - FLOOR WALL - Angle Head gives Internal Error                              

7957852

unv name is saved as Solution name only in Teamcenter mode                      

7957899

Error Failed to get column value for column DB_PART_NAME_EN expanding ANT   

7957977

1102(2):Post Proc:CaeTest_1637_post_jat:ResultsValidation value Diffs           

7958140

IP classification prevents saving the preview in NX                             

7958198

Access to Drafting View Settings 5-6 seconds versus NX9 was instant.            

7958264

[5]Modeling internal ugnx1102_2.230 Autotest Failures:Nodes differ : original va

7958280

Recreate missing stock component flag on refile_part.exe command does not work  

7958916

In Design Blank,the component couldn't build through some operations         

7959025

NX returns wrong shortest tool report with the env                             

7959516

Unable to open assembly because of A part is not loaded-message               

7960244

 Can not select a mesh point though its available in selection filter           

7960260

IE when use clone and reference in the same time                                

7960503

ISV simulation - NX crash                                                       

7960575

Error - Could not find schema transmit file when opening PTS assembly in 11.0.1 

7960620

Hole Making  Operation doesnt show FeedRates during Verification ToolPath      

7960782

Edit Spreadsheet failed in wizards e.g. add a new material into PDW project     

7961137

1102(1):MotnPostProc:motion_postprocessing3: Result measure time diffs          

7961191

1102(1):NXN Slvr:ufunconverted_nxn_solve1C: results validation diffs            

7961278

MMCs failing to create as glued coincident                                      

7961515

Assertion error while creating Non-Master drawing after suppressing the PMIs in 

7961834

Open the Electrode Design application,The information window still start up    

7961879

Temperature calculation gets unexpected result                                  

7962276

Error when importing the expression in to the part                              

7962577

Welds are requiring Entire Part Ref Set                                       

7962889

REG: Connected Part Attr of Exsting Type Weld Point is wrong on PNT             

7962995

UAD Failure(NX11.0.1) Dimension option has changed                            

7963001

UAD Failure(NX11.0.1) Dimension Reference Object is moved in Liner Dimension  

7963003

UAD Failure(NX11.0.1) Dimension position slightly moved when open drawing file

7963014

UAD Failure(NX11.0.1) Ordinate Dimension retained after update views         

7963032

Enhancement: support using relational operators to perform Classification search

7963071

NX throws assertion error if user inherits preferences in drafting preferences d

7963130

In Design Ejector Pin,the symbol you build couldn't be edited                   

7963164

[2]ugnx1200_13Autotest Failure:+++ XML comparison failed                        

7963470

Post Builder remembers command from one PP that doesn't exist in other PP       

7963573

[1]Sheetmetal ugnx1102_2.232 Autotest Failure:Nodes differ : original value 5246

7963754

Unable to open part with overstock, Null pointer supplied to Routing           

7963943

Bead created in wrong position on Promoted Body                                 

7964315

Initialize Project in TC creates over 2000 items and hangs NX                   

7964469

Edit Hand Reach feature, Base-data-dependency should not change                  

7964820

Memory access violation stamping output in die engineering application           

7964832

[5]ugnx1102_2.2017022200Autotest Failure:+++ XML comparison failed              

7964874

Dimension changes after Drawing Update                                          

7965480

Cannot create different types of slug openings                                  

7965920

Cannot display Detail  Boundary Format settings value 0.25 mm dialog box     

7966265

[1]TcinTest_IMP_t109 +++ XML comparison failed AttributeInformation           

7966268

In Operation,the value of CollisionMaterial shouldn't be changed to negative   

7966295

Bodies at incorrect location in Ray Traced Studio Window                        

7966321

UI issues about slug hole when switching Cavity Type                           

7966329

[1]ugnx1102_3.2017022500Autotest Failure:+++ Nodes in the master XML file are mi

7966343

[1] Drafting NX1102_IP3: Autotest Failure: Drafting auto-tests are failing with 

7966379

1102(1):IPart:CaeTest_ms_mixedfp_complete_jat:FacePair_Feature_Record Diffs     

7966409

1102(2):Meshing:CaeTest_2dElemThickness_jat:thcikness_summary Diffs             

7966673

Wrong scale after Import Part                                                   

7966769

Inconsistent beam orientation between Fem and Sim mode                          

7966840

Make Unique removes Image Logo in titleblock                                    

7966876

The BACK button does not allow you to return to the interface of the MW library

7967183

Can no longer get Correct Wire Segment From Stock Body                          

7967224

Reg_NX1102.3:The number count disappeared in MemberSelect                       

7967405

Dependency is changed when PEDPRO type changed from Head Impact to Leg Impact 

7967428

Signal Adapter still work as a deactivate state                                 

7967592

SpeedControl is not available after edit it in runtime error dialog           

7967601

In operation,the gears slave and master axis can select the same joint       

7967645

ui_comp_angular_dim always resets angle to the value of the MinRadius attribute

7967871

Performance Autotest case which passed in NX1102IP2 failed in NX1102IP3         

7968247

Keine Java Author-Lizenz verfügbar beim Starten vom NX Beziehungsbrowser        

7968262

Different WP selection result for Impact Analysis between Assembly and Weld part

7968483

Missing Smart Object parents in NX11 from UFSo.AskParents                       

7968557

Distance Measure is not correct in context of Assembly                          

7968646

UF_UI_ask_open_part_filename no longer works for some Foreign dataset types     

7968908

Some error arise when message Cannot mix units from root to work part popup  

7969318

The tool path of Contour Area has a sharp corner in NX1102.3                    

7969365

Edit physics in Runtime Error,it can't work                                   

7969463

FBM - Undesired Cut Area selection for Mill Area geometry parent                

7969803

Assembly components can not be open                                            

7969927

WELD Edit Parameter ( on welds) get INCORRECT OBJECT FOR THIS OPERATION        

7969958

[1]Modeling ugnx1102_3.238 Autotest Failure:+++ Error creating body of feature 

7969968

[1]Modeling ugnx1102_3.238 Autotest Failure:Nodes differ : original value EDGE *

7970021

ELEC Provide API to provide capability available in NX 9 to map stock           

7970316

In Operation,some joints should not be selected as Axis Joint                  

7970356

Dependency is incorrect when use eye from component\\Display Part in the WVZ  

7970379

Flat ejector preview is not right display after rotate prod assembly by 90°    

7970393

Sorting after the column was mobile does not work in the Bill of Material     

7970403

Assertion fail happen after changing A40 value                                  

7970493

Face Color Management don't work in assemblies                                 

7970817

Reg:Standard part cannot transition                                             

7971696

Error while opening drafting files in NX                                        

7972962

Points On Face Do Not Update When Part Is Replaced                              

7973280

BaseDataDependency is incorrect when only toggle on Eyellipse or Head Position 

7973387

Physical properties of 1D element will miss if delete old mesh and recreate new 

7973463

CAE Preparation geometry fails to update when adding new plate system           

7973631

Mesh collector update wrongly when modify scantling of plate system             

7973729

Imprinted edge of moved plate get wrong attributes when CAE Prep model update   

7973793

Model Setup command shows a wrong error message                               

7974215

Display Color missing when importing mixed unit model in Assembly Fem           

7974582

Blank is a valid value for Group ID in NX 9.0. Invalid in NX 11                 

7974583

Can plane method in skecth dialog be changed in defaults     

7974600

PBPOST NOT SAVING in NX11.0.1.11 MP1    

7974638

NX11 Save As allows user to inappropriatlye change revision ID                  

7974735

Reg: Bend information of XML Output result is wrong                             

7974818

NX session downs when UFPlot.AskDefaultCustomWidths() is called on NX11.0.1   

7974852

If drawing and part in different folder, the drawing can't be exported         

7975002

Cannot edit ordinate dimension in electrode drawing                             

7975260

Postprocessor - Different postoutput with NX11.0 und NX11.0.1                   

7975579

MoldWizard - More steps to delete the surface patches                           

7975643

[1]Modeling ugnx1102_3 Autotest Failure:Nodes differ : master-curve  ModlTest3_

7975650

[2]Modeling ugnx1102_3 Autotest Failure:Nodes differ : master-curve  ModlTest3_

7975745

Moving Legacy Broken View results in Memory Access Violation loop      

7975998

Ped Pro gtr test case trimmed wrong area       

7976009

Ped Pro corner bumper points       

7976012

UF_UI_update_listing_window no longer works  

7976017

Ped Pro side reference lines issue   

7976037

Ped Pro bumper reference lines upper and lower   

7976084

Unable to search for the image dataset stored in TC for Raster Image            

7976397

Loadings dont match in the Bumper                                           

7976414

Imprinted edge of three supported bracket failed to create for some cases       

7976479

IE when the second time using replace solid function in other part              

7976737

Development severe error processing occur when right click patch surfaces    

7977108

NX11 cannot avoid Cut Area for MILL_AREA add-on                                 

7977225

Corrupted tool paths in fixed contour - area milling                            

7977781

X Y and Z not populating using electrode design                                 

7978023

About the relationship box when creating a new drawing    

7978215

PostInt:The time sum of timing chart is empty                                  

7978289

NXOpen.UF  UFPlot  SetSessionCustomWidths returns Internal error: memory acces

7978401

[1] Drafting NX1102_349: Autotest Failure: Drafting auto-tests are failing with 

7978611

NX crash using accent key in expressions with German keyboard                  

7978843

NX10 - CAM drag and drop from one program to another the Icon changes           

7979499

[298]ugnx1102_3.2017030700Autotest Failure:+++ OM check world: 2 failures - UGS:

7979508

[39]ugnx1102_3.2017030800Autotest Failure:+++ OM check world: 1 failures - UGS::

7979521

[5]ugnx1102_3.2017030800Autotest Failure:+++ OM check world: 2 failures - UGS::W

7979527

[4]ugnx1102_3.2017030800Autotest Failure:+++ Update not protected in JA call Cre

7979548

[2]ugnx1102_3.2017030800Autotest Failure:+++ Tag -870899776 not OM_methodic_obje

7979586

Reg: Select Curve button do not function on Die Design tool bar command        

7979781

The direction of the draft need from TCM inheritance,cancel the Draft Angle Sett

7979805

Internal occurs when create Extrude Facet Face                                  

7979952

Undo of Split Shell command occurs Internal Error        

7980854

The ugtopv.exe translator is versioning the NX dataset in Teamcenter twice. style="mso-spacerun: yes;">        

7991933

Create Snapshot data has failed to update drawing error                         

7991971

The scaling in cam prpfile to be off or tend to disappear in special range value

7992225

Displacement field represented with the wrong coordinate system                 

7992249

File-Open-STEP always uses STEP203                                              

7992946

KdaTest_Expression_PR2187965.cxx 10^3mm units problem         

7993066

UF_UI_save_listing_window creates blank file          

7993091

In Design Blank,it shows an display error when change the parameter of the blank

7995250

Set translucency of the link body value to 0 in Pocket before cutting pocket   

7995444

Regression issue, Trim Region Patch fails when using Traverse boundary option   

7995605

1102(4):Core:MULT:NXOpen.Expression value Diffs                                 

7995644

Memory access violation - Corrupted Operation                                   

7995906

KdaTest_Expression_Import_func_floor.cxx 10^3mm units problem                   

7996504

When use a point as reflection object and edit feature,Resolution option should

7996512

Assertion fail happen when create Reflection Data feature with correct operation

7996533

Wrong result of copy electrode if selecting a datum plane from a renamed blank  

7996543

[2]ugnx1102_3.2017031400Autotest Failure:+++ XML comparison failed              

7996555

The new blank is not right after doing Delete Body/Component with using Sparking

7996631

[570]NODE ERROR: Cannot find output element Current Fill Percentage in new nod

7996742

Cooling fitting failed to rename with an error saying Encountered NULL point    

7996837

Internal error while switching tab in Feature2Cost -molding dialog            

7997535

Invalid body found when run CAE Preparation for special case                    

7997761

NX Instance attributes are not updated completely in parts list                 

7998078

NXException occurred with error message Tool path event index is out of range 

7998180

Reg: Select Curve button of Die Design do not work in the assembly             

7998215

Stocksize autotest case failed while compiling XML file                         

7998223

[1]ugnx1102_3.2017031401Autotest Failure:+++ Found XML comparison difference

7998244

BaseDataDependency of PEDPRO is error                                           

7998265

Bend information is not created if toggle on Transform Flattened Part         

7998337

Reg: Cannot run profile cutout in manager mode                                   

7998386

AF:Use the method of Face/Plane Normal to choose surface in Operation       

7998456

Reg:Edge reinforcement created in NX1102 cannot transition                      

7998525

NX Crashes on simulating external machine code file                             

7999163

Reg:Internal error when create a Fill  

7999452

Reg:Lightweight Section view in NX is not displaying correctly in Vis   

7999932

FrameXY, frame3Point and UF_KF_make_frame unnecessarily set part modify flag    

8000078

REG: Fastener Assembly configuration library miss when retrieve KRX from TC     

8000588

NX11.0.1 MP1 doesn't release file handle after open part initially              

8000672

Publishing a thousand split welding joints has an enormous performance issue    

8000680

Internal error in Part Cleanup for a specific NX4 file                          

8001049

Drafting balloon flipped 180 when translated to JT                              

8001162

When the parent hidden,from edit return to add Ejector Pin does not display   

8001457

In NX Manager,Initialize Electrode Project couldn't work                       

8001635

Read the Number Attribute need is associated with the unit in Bill of Material 

8002815

Null tag not allowed is happened by related node                            

8002996

Adding a table template which includes some attributes                          

8003123

1102(2):Post Processing:MULT:PostAnnotation value Diffs                         

8003988

Bolted connection fails with coincident and coaxial holes                       

8004098

REG:Global Shaping feature changes on suppress/unsuppress                       

8004314

IE when click Workpiece after initialize ED project then initialize MW project  

8004316

Wrong information in information window when getting object information        

8004404

NX will terminate when play back One step TrimLine autotest                    

8004463

When insert Eject Pin, recommend length function does not work                  

8004635

Internal Error when creating Pinjig for plate which has profile top line on     

8004706

Failed to play back autotest about One step Entire unform solid                

8004807

When select multiple faces as target face to intermediate unform, autotest fails

8004946

Modeler error: modeler error: please report fault - making a new sketch fails   

8004973

Standard Parts are not working in NX11 as they have in NX10 and earlier         

8005467

Need to re-create an invalid autotest in NX11.0.xx                              

8005923

ug_excel_open_file returns value as 0 for excel file named with multibyte chars

8006065

Internal error occurs while pasting reusable object                            

8006115

No feature be created when use Extend channel                                 

8006185

TC Naming Rule problem with NX11                                                

8006550

NXOpen : AssignMaterial crash in NX11                                           

8007348

Need to support the choice of Sheet Body, support multiple choice edit for Ribs

8007479

Bad Performance if adding reuse components because of partslist update          

8007616

Click Delete Component function appear Incorrect object for this operation error

8007987

NX11 old ship application update Library in Teamcenter                          

8008046

NX11 old ship application Edit limits after placing the profile                 

8008064

NX11 old ship application Edit end cut afther placing the profile               

8008195

PLANAR MILL - set all boundary to same tool side in NX11.0.1 worked in NX11.0   

8008815

NX crash or IE after delete one head set in sparking position dialog            

8008826

Ejector Pin Search Sleeve Region cannot find the hole with blend                

8008906

BugHunt(NX11.0.2ip3) An internal error occurs after canceling the editing of 

8009006

[6]ugnx1102_4Autotest Failure:+++ XML comparison failed                         

8009015

[4]ugnx1102_4Autotest Failure:+++ Call to ES_solid_ask_parasolid_tag with occur

8250221

EE-ReUse Instantiate Template Part with Error                                   

8250484

Encountered Null pointer attempt to convert MultiLevel Flex mating conditions   

8250964

Logo disappears from drawing frame when component is Make Unique              

8251462

Schnittkurven in Anordnung werden nicht aktualisiert                            

8251715

Problem with assembly constraints and position if loading NX7.5 assem in NX9  

8254081

Toolpath Simulation with Turning Tool Assembly inside Spindle (B-Axis) is wrong 

8254592

Error - Encountered unexpected NULL pointer, creating Formboard                 

8255628

FTL-Use of NX Simplify Path Function Results in Support Removal from Electrical 

8261089

No pause when generating multiple toolpath and a warning occurs               

8263262

Bad Tap behavior when wrong volume becomes selected                         

8264874

Wrong PNT Visualization with DeleteBody Features                                

8269631

FTL - Switching Between Centerline And Simple Style On NX9 Harness in NX10   Res

8270011

Routing Spline Path edit performance investigation of user error on constraints 

8279482

Section surface created on multiple surfaces only outputs part of desired faces 

8281824

Broken Expression produced endless Update                                       

8282681

Performance is slow and results of mirror are wrong                             

8282768

Mirror ship structure / save                                                    

8283956

Interpart Expression have wrong up-to-date status                             

8284935

Product Interface: Inconsistent Behaviour Delete                                

8285866

CAM: No_Change_of_Tracking_Point_for_Avoidance                                  

8287892

Wrong Out of date status in PNT & ANT when data partially loaded                

8288479

Status of linked Expression not ok                                              

8292867

Rapid Dimension with inferred Measure Method goes wrong                         

8293235

Different output of variable mom_pos[2] in NX 10 from NX8.5                    

8296782

Internal Error: Memory Access Violation when changing Role                      

8298058

Replace Feature is very time consuming                                          

8298068

Replace Feature has too many faces to map                                       

8298071

Replace Feature did not show all needed mapping inputs          

8298321

Information window for Analysis-Deviation-Checking scrolls to the bottom           

8298416

Unexpected behaviour of Product interfaces links deleting from Keyboard         

8298546

Components move to wrong position upon orient branch of 2level components       

8300242

The created feature of the function Vision Planes and Head Contour cannot

8303279

Deviation Gauge dialog will be canceled after using Show Parents                

8303280

Wrong CL code in Verify when Cutcom ON                                         

8303951

Directory of dfa files created in UGII_TMP_DIR each time file opened / created  

8305241

Points shown when generating HPGL,CGM or PDF files of NX drawing view           

8307669

Part family spreadsheet seems corrupted                                        

8308384

Incorrect tracking point for Groove Face in Turning                            

8308744

NX10 unable to create some Groove welds (while it was ok in 8.x)                

8310406

Run Navigator does not update when properties are changed on an object          

8310417

Incorrect result when snap point is selected during Rapid dimension creation    

8310746

CAM Face_Mill_Manual - Engage Height always 3mm                                 

8310885

PS29.1.184:Update fail - Trim and Extend fails with Unable to extend the       

8311134

Re-mesh model when switch ON/OFF Export Mesh to Solver                           

8311286

Resize Bend Radius on imported part causes NX11 to crash                        

8311457

Total loss of data during Save As in a drive with not enough drive space        

8311663

SPCD errors (wrong sign DOF6) during export to Nastran                         

8311893

GRIP &ATTVL ignores IFERR label and throws error message anyway in NX11         

8312267

Internal errors - could not convert weld points                                 

8312525

Global Shaping - Bend only on Sheet                                             

8314261

Spline path shape change intermittently leaves control points in previous pos   

8314368

Expression: problems while creating new Expressions                             

8314383

Bad curve distance given when part w/ coincident studio splines open in session 

8314464

GRIP &ATTVL ignores IFERR label and throws error message anyway in NX11         

8314511

GRIP &ATTVL ignores IFERR label and throws error message anyway in NX11         

8314697

Branch with no content by using Paste Special                                  

8314899

Minimum Simulation Time equals zero                                             

8315610

Save IPW is incorrect when Optimize Curve is checked                            

8315752

Where Used report fails to give correct information                             

8315845

Selection Error Animation Post Tools Measurement                                

8316235

ugautomotive ribbon bar customization cannot be applied from UGII_SITE_DIR      

8317190

Wrong clamp ports orientation                                                   

8317452

Dimensions in Detail View loses associative after view update                 

8317867

CAMSetup.Postprocess API doesnt create tool and time listing with TC config    

8318028

NX export to ACIS does not release license after translation                    

8318047

Hole Table creation not work correct in new created view                        

8318217

A Contour_Area using a Bull tool and Steep/ & Non-steep will leave islands    

8318724

Unable to save simulation file (.sim) in NX11                                   

8319241

CAM: See-Thru All state not available in Specify Geometry                       

8319468

Save part not possible after deletion of an extract feature                      

8319485

EXP: different behavior with Tab or selection                                   

8319514

Availability of Model View sort order-buttons not consistent                    

8319554

Edge Blend loses Variable Radius Points after Deleting Cutout                   

8319555

PatternMember.GetAllComponents has incorrect remark in API documentation        

8319664

No move of the label of a detail view possible by using rectangle boundary      

8319701

10.0.3-MP8 - File/Export JT - Open JT in Vis, PMI highlights wrong Solid Body   

8319719

Rapid Dimension creates an angular dimension when a linear is expected          

8319808

Improve usability of Extrude until next start limit                             

8319828

Navigate to Parent View not available                                           

8319903

If a sub assembly is moved (transformation) the weld locator preview is wrong   

8319920

Measure function does not work for distance between NX facets  and Datum plane  

8319939

Confusing Status Bar Description with Delay Product Interface Update ON         

8319999

CAM NX10 - Problem with Stop in Verify -  3D Dynamic                        

8320027

Limitation in the update status shown in the Assembly navigator tree            

8320040

LinkBrowser: ParentInterface dont show delayed PI status                       

8320046

Server rtb file no longer overrides client for ugautomotive application         

8320051

StatusIcon: strange Icon for linked Bodies after delete the PI                  

8320071

Product Interface Curves are shown when all objects are hidden                  

8320073

Product Interface Showing Handles for some object types                         

8320108

Customer default settings (simulation, general, fe model create) not honoured   

8320120

Any changes to Expressions dialog tool is expanding all                        

8320126

Copy Overstock gives wrong alert if WAVE links are broken                       

8320131

Wrong Parent Part of a link                                                     

8320214

NX hang during update of draft body                                             

8320305

SurfaceContinuity: checkbox automatically de-selected                            

8320334

Value of cylindrical dimension changes when the position of dimension is changed

8320352

Number of Bodies changed is not shown                                           

8320442

Cannot rotate fixing part in formboard assembly via Rotate Component            

8320543

Control of window size not working in TreeListWidthDemo.vb                      

8320563

Link: status of CSYS Links  are wrong                                           

8320598

Missing Selection Scope in The Surface Continuity Analysis                      

8320784

Moving feature outside feature group causes very long update time               

8320788

Wave unfreeze -  ANAV column Symbol (ice cube) does not disappear                

8321078

Attribute exclusion list not working for mirror body                            

8321307

First ellipse feature is not always recognized in NX 11.0.0.33 MP0 D2         

8321403

It is not possible to reorder a feature from feature group to feature group     

8321542

Customized Contour Profile Template Gives Internal Error after Part is saved    

8321732

Different value of pitch in thread                                              

8322334

The Target Points RP1 and RP2 (Rear Pillar) cannot be created in the correct p

8322577

The Point RH (Rear Header) can not be created                                   

8322584

The Target Points FH1 and FH2 (Front Header) cannot be created in the correct 

8322715

The Target Point SR3 (other side rail target) cannot be created                  

8323361

Create Project is incomplete                                                    

8323557

Wrong result at point to point section with activated secondary geometry        

8323718

It is not possible to paste a feature if the body belonging to this feature

8323826

Curios results after STEP import                                                

8324082

Cannot Create MMC                                                               

8324420

Welding Export to XML does not take into account the Chordal Tolerance          

8324690

Saved results do not get updated when Calculate is used on modified body        

8324816

Deviation after Update                                                          

8325063

Export Welding Joints have incorrect Vector when other than ABS-Csys is used  

8325076

IPW Transfer doesn't use same component with Product Interface as with wave_link

8325101

PDF Export with Variable UGII_PDF_ACROBAT_VERSION=1.5 doesn't work              

8325195

Error in Runtime Behavior                                                       

8325321

Leader Arrowhead gets incorrect orientation if the Annotation with   Lettering A

8325526

Ped Pro NCAP standards update - corrections and refinements                     

8325657

The input angle contains non-numeric data                                       

8325774

Show Parents of a Global Shaping Feature in Part Navigator                      

8325876

Regression - Vehicle grid plan incorrectly positioned                           

8326182

Studio Surface don't update                                                    

8326272

Replace Feature takes too long for replacing a simple curve                    

8326280

Studio Surface don't update-2                                                   

8326364

Error Message missed after changing invalid Entries in Class  TA_DRILL_50_30  

8326396

Transform immediate - drives the mechanism in the opposite direction            

8326437

User cannot change path - NX Expressions with relation to Excel                 

8326615

Drawing Hole Table Does not contain all holes                                   

8326728

NX 10 does not use localized query names in advanced search drop down list      

8326792

NX 11.0.1 unable to load a part saved in 11.0.0                                 

8327052

Error - Could not find schema transmit file when opening PTS assembly in 11.0.1 

8327064

WeldAdvisor shows different results checking the same points (Point Face Distance

8327301

Error: An operation was attempted on an invalid or unsuitable OM object         

8327417

NX sticks during assembly opening                                               

8327531

TCNO.- Probleme mit MCP - VNCK crash after Save SRAM                            

8327849

Message Process Secondary Geometry is off but Secondary Components list exist

8327866

Incorrect 2D and 3D IPW in Turning after regeneration of a program             

8327956

Copy paste let NX freeze                                                        

8327968

Incorrect 2D and 3D IPW for a turning operation                                

8328078

NX Relations Browser fails in NX11.0.1 again by unsigned JAR files              

8328082

NX UI freezes after calling UF_PART_open in UF_CLONE_end_part_clone_cb          

8328268

ISV does not consider cutter compensation Tracking Data for drilling operation

8328634

Mold Base Library UI doesn't populate values when editing Hasco Guide Pillar    

8328637

Memory access violation when clicking on Lathe Machine Control Operation        

8328767

UF_PART_open() throws Sig11 in NX11 from UIStyler OK callback in NoPart status  

8328962

Changing_CSYS_Scale_makes_Link_Position_Independent                             

8329211

NX1101 Copy Electrode throws internal error with renamed/deleted EW_FOOT_NAME   

8329400

Measure angle shows a wrong value in a special case                             

8329568

CAM: memory access violation when clicking on operation                         

8329731

File  Execute  Check Java for NX fails by unsigned VerifyJava.jar file        

8329911

BaseData update fails                                                           

8330080

Replace feature does not work for weld features                                 

8330644

Parts contain invisible Wave-Links, which could not be deleted                  

8330897

The Edit Reusable Component function can not be used                            

8331210

After replacing sheet-body, the downstream Variable Radius Blend is losing    

8331637

Delete only Feature Group did not respect active Feature Group      

8331841

Ped Pro BLE Location       

8331842

Ped Pro SIL incomplete       

8331843

Ped Pro Head Impact Zone incorrectly trimmed       

8331870

Ped Pro Desired Type and Assesment - zone trimming       

8331932

Ped Pro ENCAP Evaluation surface trim error       

8331950

Ped Pro ENCAP Evaluation grid points not projected       

8331986

Ped Pro ENCAP block out curves not mirroring       

8332450

The feature type for Develop Trim Line Feature is missing in PNT                

8332716

Extrude can not be created                                                      

8332805

RU installation only: Unit value issue in Constant Type                         

8333007

Ped Pro Desired Type and Assesment - BRRL and SIL incorrect                 

8333175

CAM: memory access violation when clicking on operation                

8333568

Transform Bead :adding user attribute to the bead feature behaves different     

8335390

The SRL(Side Reference Line) is defective in NX11.0.1 for the Standard Europea feature behaves different     

8335813

NX hangs when processing an ABAQUS input file      

8336491

Electrode Drawing fails with The second object associativity type is invalid feature behaves different     

8337842

Ship Section Tool (manual) wrong deck relations    

8337843

1102ip6 - Mp Structural - Augmented times not exported to deck from bun    

8338719

Slope Analysis takes too much time in NX 11 compared to NX 10.0.2    

8339163

Problem fixed in MP2 replicates again with the latest MP3 (Java error with IE)    

8512186

Customer default: Coverable Stocks are lost after Routed with connection list   

8513966

The results of Max value and Min value are changed by order of edge selection   

8520888

Trim boundary doesn't work in CM                                                

8523423

Overstock remains before the stock created in Timestamp order                   

8523656

Gouge motion in cavity milling                                                  

8523914

The dimension value is wrong and different from the 3D model                    

8526489

Getting error while replacing the part (Routing elec)                          

8526644

NX Crash: NX closing automatically when updating Spread sheet                   

8526782

Wire EDM internal trim operation give incorrect CUTCOM                          

8527528

Naming Rule under NX PDW command DEFINE INTERMIDIATE                            

8527663

NX leave some uncut areas in some levels                                       

8529357

Update simulation does not works                                                

8530616

Internal Memory error while solving Geometry Opt                                

8530763

Check Wall Thickness allows selection of Sheet body                           

8531299

Datum Axis construction impossible with inputs in Perpendicular to vector option

8531309

Memory access violation when updating expression       

8531317

Guided Curve : Tool path violates the part geometry after Divide        

8531363

Sketch on face is listed in application list                                   

8531383

NX11 has stopped working while saving assembly                                  

8531385

Edit during update error when stock replacement                                 

8531506

Report NX routing problem message occurs when Replace Stock                  

8531560

PMI Cyl Dimensions Created on sketch is exported to JT as Assorted part object

8531575

NX Manager - How to add Description field                                     

8711874

The collision is not reported  using Replay mode                                

8800632

Internal error when select parent weld points to Export CSV File                

8800966

Unacknowledged exception 3420003 while saving a part                           

8801210

If you don't select bounding faces in forming insert, user can't create datum plane 

8801262

Unable to access Simcenter Durability Wizard  

8801269

Display incorrect when clone the assembly with drafting specification dataset   

8801335

NX11 - toolpath crashes manufacturing operation                                 

8801580

NX11.0.1 MP1 NX Relation Browser is asking for java_author license            

8801621

Assertion failed when check world after analyze the body.                       

8801765

NX not opening AutoCAD drawings correctly 3D geometry not represented in drawing

8802898

Turning Internal error: memory access violation                                 

8804066

Where used report in NX comes up empty in managed mode first time               

8804457

NX session downs when UFPlot.AskDefaultCustomWidths() is called on NX11.0.1     

8804467

NXOpen.UF  UFPlot  SetSessionCustomWidths returns Internal error              

8804483

Reg: Plate subsystem attributes failed to update                                

8804766

New (Cooling) Standard Parts interface problem                                  

8804881

UFCgm.AskSessionCustomColors terminates NX11.0.1 (MP1)                          

8805012

Subcase labels are not correct when importing Nastran sort2 functions           

8805674

Arrowhead moves when drawing update in NX8/NX11    

8806756

nx10 nxtopvdirect errors causing dispatcher jobs to go terminal     

8806816

Encounter Tool path event is not of the correct type error                    

8806965

[4]ugnx1102_4.2017033100Autotest Failure:+++ XML comparison failed              

8807041

Invalid object found when update CAE Prep after delete some feature             

8807201

No tool body attribute exists in the nx_features_swept_volume KF class          

8809754

Attribute templates not checking for duplicates correctly                       

8809971

PIN_CATALOG_DIA value isn't recorded in UM_STD_OPT_DIM if recommend length  

8812878

parts from NX7.5 will not open in NX10   

8813419

Plate cannot be created                                                         

8813538

Special Openings/Insert find wrong in Feature2Cost Molding    

8813730

Centerline symbol can not be selected when using [Two Curve Intersection]     

8815741

1102(1):NXN Slvr: SOLVE Python syntax error (indention)       

8817054

Parallel dimensions no longer work with Drawing Automation in NX11        

8817371

Law Extension becomes self-intersecting after renewing in NX11        

8818038

Export PDF creates non-compliant file format when view label has a prefix...        

8818128

NX pops An invalid tag was passed to the tag module while delete part have PMIs        

8818945

Ship Section tool is not trimming ship body        

8819083

Orientation of 1D element at port side is wrong        

8819494

If gravity is defined, .dat files cannot be output in SOL111 Vibro-Acoustic        

8820299

Issue: Update delayed constraints in part does not work (NX11.01 issue KBE setti        

8820521

Object Information function (Ctrl - I) fails to report to the visual WCS         

8822108

Sketch geometry modified after re-linking broken Wave Link Body         

8823155

Point on Curve fro a Start Pont goes off the curve         

8826947

NXMGR: CGM is incorrectly attached to model instead of drawing dataset         

8832268

NX subset command ADD CONNECTED BY ELEMENTS fails in NX 11.0.1         

8833456

NX: Unable to load part in NX11         

8835247

When using part history the info window automatically scrolls to the bottom         

8835532

Hole Milling-Copied operation-remove existing geometry - Memory Access Violation         

8838443

Weight and Center of gravity does not include stiffeners         

8838577

Slope Analysis Reverse Vector doesnt work         

8839810

fatal error using tcin_import         

8841085

Wrong weight on stiffener subsystem none         

8841483

ugpart & ugmaster save same time and QAF of ugpart now in ugmaster         

8845800

Internal error while moving component in manage mode         

8845961

NX Crash inserting custom symbol         

8847787

Cannot access the PTS template of MW/PDW Standard Parts         

8853965

The internal error occurs when I open item with the certain Revision Rule