Fixed Problem Reports

6273244

A part which has Linked Composite Curve created before NX 7.5.1, and has source parts completely unloaded, may show curves in wrong position after Part Import

1127613

Misbehavior Wave Geometry-Linker 

1127821

Wrong tool path computation in PLANAR PROFILE 

1127824

Law Extension Miter Method 

1127845

Sketch coincident constraint snaps to opposite end point of edge than selected 

1127902

Routing Reuse search does not filter on previous selection 

1127927

Curve Length Bug in NX 9.0.3 

1127954

Error - Invalid view sequence number found, creating Stock Offset Spline Point 

1127974

Not able to open Partfile (last stored in NX 9.0.1) in NX 9.0.2.5 D3, 04Aug14 

1127978

Wrong Z direction of weld point created by existing points

1128001

Unknown IPW Collision Checking 

1128175

NXOpen can't get Dimension Hole AND Shaft tol values from FitSymbolsAndLimits 

1128277

Editing of spline path created Pre NX 9.0 takes a long time 

1128535

Constraints not displayed on screen when creating path with Lock Length _ Angle 

1128541

Routing assembly constraints show the incorrect value in the display 

1128678

Cannot add drawing for undercut blank due to missing EW_COMPONENT_TYPE 

1128688

Show exact fails on JT file 

1128705

Electrode Design Blank increases undercut REF_Z value on each Position Update 

1128757

Multiple bodies in global shaping results in scattered sheet bodies 

1128761

Studio spline in expand view 

1128937

PMI Reference Plane_Datum Plane not translated from NX 9.0.3.4 to JT 

1129052

Reference Text Attribute does not update after revise 

1129167

Strange behavior during edit reusable components

1129175

COM Error 80010100 while creating parts from complex part family 

1129227

Colors on faces are not preserved during Feature Playback 

1129234

Law extension surface doesn't meet quality 

1129704

Wrong dimension value in view break 

1129803

Cannot create desired development with One Step - Entire Uniform 

1760113

Mirrored faceted bodies get dimmed colours 

1791299

Streamline gouges in the part 

1793082

CAM: PR - Turning - Toolpath with Custom Stock Value is not created correctly

1814361

Problem with center marks 

1820370

Change in custom boundary stock values is not handled correctly 

1822765

Same Cylindrical centerline selection does not give the same dimension 

1835918

Retain Annotation font set to invisible does not work for 3D centerlines 

1842352

2D Centerlines not updated in Revolved Section View 

1845934

8251179- In the old part family template if we add any new member at last row, the last row was getting replaced with existing member at first row

1848798

NX hangs when creating Formboard 

1850987

Place part does not work in native environment 

1866971

Family Object Name is invalid with specified attribute and space character 

1870054

Orient branch fails following flip component 

1874908

Create interpart link default at off is still creating Wavelinked body 

1875433

Open whole assembly in NX 7.5 - opens only one level at time 

1878931

Keep switch settings in session memory in selection tool bar 

1884620

1D mesh direction change 

1891032

Stock Values for Custom Member Boundary work wrong when Curves have wrong direct

1903841

Points not added correctly when editing spline path 

1908820

Shell element stress results wrong if plotted vs material coordinate system 

1914851

Error in Sketch constraints after plotting un-displayed drawing sheet 

1916880

Dimension changes in NX 8 without reason 

1918104

Thread with "Move Object" Feature not possible to move, too 

1922140

Routing Port does not move with path when using deformable part TODO:VIS 

1922502

Lightweight representation icon shown when no geometry in JT file ref set 

1931502

Surface Finish Symbols do not migrate correctly from Ideas to NX via CMM 

1933385

Added support to translate the smart lightweight views using 2D Exchange translator

1936453

CMM Ideas: Surface Finish Symbols do not migrate correctly 

1936845

Surface Finish Symbols are not migrated correctly via CMM 8.5.1 

1937024

Surface finish symbols do not migrate correctly 

1939354

Section function fails at sectioning of Sheet Body with bad data quality 

1940563

CAM NX.8.5 - FloorWall Mill - Use Exact Inconsistencies 

1941064

Assign Corner - Mitre_Cope is grayed out in some routing mech. sub-applications 

1941448

Provide faster access to reference dim option 

1942299

Special signs in UDE-options causes error when MKE configuration is read 

1945025

Bolt Circle Centerline doesn't work correctly with Extruded holes 

1945926

A deleted or invalid class id was used when attempting to Remove a Spline Point 

1946314

The performance of dragging Spline Paths is slower in NX 9 v NX 8.5 

1947203

Cylindrical dimension with baseline attached to a 2d centerline 

1947660

BSH Check-Mate - order of features in error stack 

1948276

Molded Part Validation shows radial crossover faces as vertical 

1949117

Assembly components disappear in the graphics window NX after step import 

1949266

NX 7.5 tool path fails in NX 8.5 when stock is negative 

1949429

Z Level, Tool path shifted unexpectedly 

1952503

Get "The following circular update was detected:" but no more during update 

1953743

Pattern did not show all details 

1954588

Editing spline paths of a harness created in NX 9 is very slow 

1954601

Spline Path editing of some segments in an NX 8.5 harness is slow 

1954615

Attributes on Datum CSYS 

1956064

Simplified thread display in Drafting is incorrect when partially hidden 

1956347

Wrong dimension value when associating the dim to the boundary of a detail view 

1956365

Export flat pattern should allow to export curve to a chosen layer 

1956523

Incorrect angle measurement after geometry modification 

1957897

Open and Update JT facets by NXOpen without existing PRT needs excessive time 

1958439

Update performance is slow, also get errors in log file during update 

1958492

Stock is not displayed correctly after applying Miter Corner 

1958981

Multiple Blocks with the same Name exists after using "Canned Cycles" in Postbuild

1960208

Crosshatch of exported DXF is on the wrong position 

1961748

Missing surface data when importing Catia V4 .model file 

1962995

Smart lightweight views with dashed hidden line are creating huge cgm files 

1963865

Surface finish symbols do not migrate correctly 

1964099

Gouge Check - unreasonable increase in processing time 

1964177

Wrong dimension orientation by creation with method -Hole Callout 

1964498

Weld point command with option overlap calculates the reference sheet not always

1964791

Hang appears to occur when creating PMI Dim in a particular view 

1964816

Regression: System hangs when specifying hole dimension in sketch 

1965019

Context sensitive help cannot be displayed for Sussman Bathe or Shape Memory 

1965092

Out of Date Status after Component Replace in ANT 

1965800

NX crash - creating a Hole feature 

1965870

Active Feature Group gets lost 

1965876

NX Session hangs while creating PMI -- Radial Dimension with static wireframe 

1965894

Delete of the "New..." row in the Product Interface 

1965948

Extension Line of linear dimension points wrong when face is selected 

1966017

PNT tree do not open if a JointMark feature is selected 

1967696

Electrical Routing: Missing Tangency created After Wrong Point Deletion 

1967736

NXOpen.Display.DecalBuilder needs multiple Commit() call for correct orientation

1969527

Custom Symbol color not displayed correctly 

1969815

Zeros are displayed in the Surface Finish Symbol's after migrating with cmm 

1971193

This CP will fix issue to load custom item type property values in ANT

1971250

Associatively of datum lost after suppress_unsuppress feature 

1971862

Copying a sheet brings up Errors 

1975114

Added support to translate the smart lightweight views using 2D Exchange translator

1975133

MTD simulation with PP created in NX 9 

1975385

Cannot copy an existing operation - internal error 

1977380

Intersection curve consists of spline segments, only 

1977762

NX Motion Export: Wrong VRML Animation in result file 

1978845

Wrong holder collision detected in operation calculation and ISV-Simulation 

1979409

Part Module: Change Feature without make Part Module active 

1979507

ug_udfs incorrectly transforms sketch and ignores parameters in rotated frame 

1979836

Added support to translate the smart lightweight views using 2D Exchange translator

1980390

Angle dimension failed

1980419

Part CleanUp delete Geometry 

1981720

Zeros are displayed in the Surface Finish Symbol's after migrating with cmm 

1982792

Operations from the first setup get an update if Override Position is selected 

1983329

KF %ui_comp_selection doesn't keep objects reliably using OnInitialize callback 

1983845

Tiny Linear Moves in ZLevel Profile 

1983846

Tiny linear move in Planar mill 

1983847

Tiny Linear moves in Cavity Mill 

1984397

PartFamily COM error 

1984811

NXOpen::Die::DrawBeadBuilder::StartPoint::SetPlane needs ug_die_design license 

1985511

Deformable Parts are not working in NX_CAM but are able to select 

1986114

Single Sided Dimension not maintaining its "side" 

1986434

PMI Cylindrical Dimensions have additional leader lines when a face is selected

1986483

Too many RCPs after deleting a segment of a path 

1986565

Depended features of linked updates 

1986593

Part Module: Unable to Pick Datum outside PartModule for internal Sketch 

1986814

When I set the Generic Post placement I get memory errors when placing part 

1986929

PMI Cylindrical Dimensions have incorrect leader lines with user defined plane 

1988104

Unable to keep saved and unlocked toolpaths 

1988387

Cannot select face with specify plane after adding new set 

1988505

Simplified thread display in Drafting is incorrect when partially hidden 

1989295

Display in Views only if a new Model View will selected 

1989491

Pattern Feature (Circular) does not work as expected in NX 8.5.3.3MP4 

1989862

Extracting edge from surface is incorrect 

1990587

Marking lines 

1990658

Placing profile cutout takes too long time 

1990749

Changing parameter consumed a lot of time

1990992

ugnx_caemigrate_tc fails to convert old CAE model objects to new CAE model 

1992087

A registered save part callback can no longer be used to save another part 

1992090

Save of transient context ASM required, even for some non-associative & Position

1992418

Electrical Application: MoveRCP_MemoryAccessViolation 

1992422

Routing Electrical: TooManyRCPs_NewScenario 

1992923

2D exchange creates unwanted hidden lines in views 

1993237

Combine results command issue when performing products or divisions operations 

1993352

NX Partfile does not open 

1993412

Second refresh view in drafting cause wrong hatching for thread connection

1993446

Doppelte Verrundungen im Flat-Pattern 

1993534

Undo-function has no result on retain PMI 

1994309

Coloring of leaders with type Datum at PMI 

1994460

Toolpath has Circles inside by using Motion Output "Line" when Contact Data is O

1994657

Multiple break out sections cause display problems with Exact view 

1994661

Hidden geometry is visible in an Exact Section View 

1994690

Missing geometry after DXF import 

1994852

NX takes long time for an edge selection. 

1994867

Bend radius not changed after changing Sheet Metal Preference 

1994925

Broken Interface Links 

1995028

Extrude of a 2 circle profile to a conic pipe (as a flagpole) give incorrect res

1995318

Part Cleanup run create timestamp problem 

1995381

Broken Product Interface Links 

1995412

Check Mate Connected Part Check fails 

1995455

Transform did not work as in previous versions of NX. 

1995456

Incorrect positioning of a Datum Feature Symbol leader on a circular centerline 

1995535

Feature Playback failed in NX 9.0.1 in NX 8.5.2 it works (2) 

1995544

ChangeAngle.prt Feature Playback fails in NX 9.0.1 in NX 8.5.2 it works 

1995774

New part family configuration could not be created results in com error 

1995823

Lightweight move collision detection not working for certain JTs 

1996112

Replace Font with character font utility - cause move of a text 

1996187

Import Part imports an old version of the component loaded in session 

1996473

Law Extension Self Intersection 

1996714

Unable to edit and reattach a constraint 

1996781

Reordering of Features results in wrong timestamp 

1996783

Missing split view for linked objects 

1997428

Part import with reposition leads to exception error 

1997453

Wiring slow performance to edit splines of 85 harness in NX 9025 

1997488

NX displays different object direction in linked part 

1997625

Changing settings of view raises error: "Settings are rejected because one..." 

1997635

Interpart update does not catch 'out of date' links 

1997648

Links lose references after synchronize 

1997703

Inconsistence of body selection in link edit window 

1997890

Place Part Query 

1998095

Feature Vector Malfunction Selection 

1998118

Law Extension with Folded Surface 

1998235

Assembly opens as modified, even after repeated saves and updates 

1998364

Move command is inconsistent with respect to Datum plane 

1998413

Show_Hide does not work in specific scenario 

1998417

JT import delivers wrong orientation of parts 

1998420

Product Interface selection is wrong from Part Navigator and Graphics 

1998521

Internal error in WAVE Geometry Linker 

1998549

Lock perpendicular Leader for text not working correctly 

1998551

Null Tag error from remove spline point after detach a spline 

1998596

Orientation of parallel dimensions changes after view update 

1998689

Fine Finish Offset in Turing produced wrong Toolpath 

1998741

Export to dxf missing values and dimensions 

1998774

Unable to get Reverse Direction option on Baselines to appear 

1998805

Change in the parent part is not shown as Out of Date in linked child part (PNT)

1998878

Need API'S to access Alert messages that are provided during weld edits 

1998890

Parent of broken expression listed as not loaded and has wrong status 

1998901

Pattern Curve in Drafting does not update when count value is from expression 

1998927

Change the selection priority of product interface bodies 

1999032

Replace Feature makes link 'Out of date' and Synchronize Links shows 'No Change'

1999035

Clone "edit existing assembly" internal error 

1999092

Horizontal dimension are incorrect 

1999100

No complete hiding of initial feature after extract body 

1999129

Body measurement does not update automatically when material is changed 

1999130

Incorrect out of date ANT column value after replace component 

1999154

Nastran import including Materialdata NX 9 vs. NX 10 

1999165

Wrong results for profile endcuts 

1999211

3D Tetrahedral meshing of the part is not possible

1999215

Wrong update status with wrong synchronize reason 

1999224

PdmSearch Simple causes the TC Nav to error on a simple search 

1999226

NXObject.HasUserAttribute() returns unexpected results for attribute arrays 

1999233

Cannot save part after creating render set by NXOpen without drawing view 

1999277

Updating legacy weld elements individual 

1999279

Open by Proximity not working for certain JT files 

1999286

WAVE Update very time consuming 

1999295

Update to End takes longer than in NX 9.0.2 

1999301

Make Current Feature is slower than NX 9.0.2.5 

1999319

Open C API UF_DRAW_ask_render_set_parms and Wrapper fail with NULL_TAG input 

1999503

Regression on exporting NX to DWG 

1999528

Fit Method Curve Quintic creates wrong open curves when extracting edges 

1999537

KF %ui_comp_selection OnInitialize fails on NoHostPointer with fix of 1983329 

1999673

Law Extension Gap 

2137349

CSW : Retained 2D centerline mark is displayed at the absolute origin

2137927

CPJ: The result of 2Dexchange is not correct when drawing have UserDefinedSymbol

2148879

NX7513MT-Part_Open_Error, Cannot open NX 5 part in NX 7.5 

2150055

 [Routing Mechanical] Inconsistent results observed using Place Part 

2155147

CPJ: Internal Error occurs reporting stock information 

2163939

HNS-TWS2 Redefine "Stock offset Point" vector direction causes Internal error 

2164397

HNS-TWS2: Replace 2 occurrence of a component raises an Internal Error 

2165932

Routing: "Overstock" deleted when I "Detach" and "Move" path point

2167015

i-Test : Radius Dimension is not placed correctly 

2167956

An internal error occurs when the user moves the custom symbol

2173887

Routing: Cannot determine type of stock for specify item. Dialog will not launch

2182328

CPJ:comments in "uf_object_types.h" are insufficient

2184729

Inconsistent view display when executing "Invert Shown Hidden"command 

2195219

2d centerline only half display in NX 8 with GCtools environment 

2197682

After play macro the color block dialog is gray

2198372

Line Arrow config is not used dimensioning to centermarks

2201567

Posting output shows mom_contact_point error in NX 7.5 

2204645

Can't perform additional bend to the existing Run in sub-assembly of routing app

2205140

uf5947 consumes memory and does not release it 

2206496

CPJ:Cannot remove a placement position when edit master 

2206865

Transform path disconnects the segment from path 

2211849

Minutes to Delay option does not work and "Batch Processing" runs immediately

2215177

Spline path cannot be moved by Transform path 

2216781

Surface Finish Symbol of .asc file imported into NX 8.5 is different with NX I6.3 

2218055

Internal error occur when I detach the path point

2218282

C9 Need "Show as Reference Dimension" option in "Textâ200235 hotspot menu 

2218340

Tolerance setting list in popup menu does not have "Reference" 

2219922

NX 8 has stopped working 

2220089

Transform path moves routing objects partially if other command is used in b_w 

2221345

The control character of Note appears by "2D Exchange" 

2222403

Dimensions move by "2D Exchange"

2222405

Target: Select Body is missing a selected object is consumed by another feature

2222514

Unable to transform path by selecting the RCP at bend 

2223446

Spline path point get created in incorrect position

2223719

Customer would like to edit Jog by using shift key when editing the Ordinate dim

2224311

Added support to translate the smart lightweight views using 2D Exchange translator

2226256

CAM: Teach the meaning of the message outputted by Create Feature Process 

2226295

Display Springback and "Output Springback Facet Body" give unexpected results 

2227008

CPJ: Internal error occurs when a point from spline path is removed 

2227411

NX 900-EAP2:Rapid dimension command falls 

2227996

LawExtension outputs wrong result on NX 8.5.1mp3

2228587

Save response is unusually slow

2228589

Bend Relief is not created by Convert to Sheet Metal command 

2229228

 Drawing Update causes Datum Feature Arrowhead shifted

2229331

Leader is changed, when tryed to change the style of datum feature symbol 

2229335

NX freezes when creating sketch dimension with selecting point of datum CSYS 

2229408

Creating Branch Path is caused Internal Error 

2229417

Spline Path options failed 

2229425

About move of "Custom Symbol" 

2229795

Remove point of Spline Path with Built-in Path component 

2231384

The Drafting Standard is not applied to the new component part

2231549

Molded Part Validation results differ in different versions of NX

2231678

Assign Corner->Bend->Inner Radius gives incorrect result for certain anchors 

2231761

Routing: Null pointer supplied to Routing error occurs while editing an S-Bend

2231762

NX crashes while trying to create S-bend 

2232056

Getting message "Could not get input entity's class" while using ugtopv 

2232774

The arrangement position of Datum Feature Symbol is changed

2232967

SM Attribute already existing on this entity message while translating JT 

2232970

View dependent edit do not work correctly for "delete selected erasures"

2232989

[CAD]The broken Bend RCP is missing in NX 8.5.3MP1HF 

2233315

[Problem]COM error 80010100 occurs in NX 9.0.0 

2233554

The display of the facet body changes when the scale is increased or decreased

2233784

Phantom font of section line is displayed like solid font

2234302

CPJ: "COM error code 80010100" error is displayed in Part Families

2234546

When you import as the Real Dimension "Folded Radius", position shifts

2235058

Batch Process does not work in NX 9.0.1 and TC10.1.0.1 

2235206

NX crashes while changing the stock diameter equal to adjacent diameter 

2235411

Leader line does not switch the position, when slide a Text to left side 

2235665

Can not exported to JT 

2235795

User defined sorting order is removed 

2236263

NX900_SZK_OD Selected point of dimension is shifting while open drawing in NX 9 

2236305

Spline shape is not reflected when changing Shape Type from Slack to None 

2236564

URG:Connectors rotate while fixing path length 

2236612

The editing contents of the "Custom Symbol" are not reflected 

2236655

A view label letter cannot be changed into an unused letter 

2236665

Internal error occurs when a spline path created with slack is edited 

2236957

iTest: Adding a path point causes an update erro 

2237709

Autoroute fails in Electrical Routing NX 8.0.3: "Stock not found" 

2237830

A part cannot be opened with an error "'A deleted or invalid class id was used' 

2237851

Batch Processing does not work in NX 8.5.3 and TC9.1.2.4 

2238399

The length of the path gets longer than length between Ports 

2238690

CPJ-VUP: UAF Failure(NX 9.0.2.2) Update warning for Convert To Sheet Metal 

2238751

When export the dxf format, position of view is different 

2238803

Exactly the same checker is not identified in NX 7.5 and NX 9.0 

2239326

Revolved features and the Tool body are created when generating the operation 

2240126

Resultant shape of Convert to sheetmetal differs from earlier versions in NX 9 

2240189

[CAD]When the spline path is subdivided ,Space Reservation is deleted 

2240291

When united component is selected in PNT only target body is highlighted 

2240560

[CAD]NX crashes while creating a connected spline path with space reservation 

2240574

[CAD] NX crashes while subdividing a spline path with space reservation 

2240989

The tool and the holder collisions occur by using 3D IPW

2241153

When existing sketch is modified and switched to Advanced Role -Internal Error 

2241162

Unable to hide tabs in blockstyler through hide method 

2241172

Error recovery completed for the following error, while to plot TIFF image 

2241246

File in use by another process error occurs while saving part file 

2241318

Memory access violation When trying to change the role to "Advance" 

2241356

Density value "1e-006" or less cannot be set in Customer Default 

2241431

Incorrect Unbend output for cascaded Sec Contour Flange on curved edge 

2241487

Invalid Hem flange output 

2241894

Show hidden objects in comp with Ctrl+St+K (Show Selected Objects) not working 

2241920

NXOpen.CAM>CAMSetup>TiltToolPaths() gives an exception as "NX error status: 1" 

2242262

[CAD]Law Extension face has a large gap than tolerance value for the input curve

2242291

Cannot create single sided Cylindrical dimension with outer dimension arrow 

2242338

[CAD]Selection intent of Trim Curve disappears in editing 

2242373

Cannot create Jog to Linear dimension which is created for '0'mm distance value

2242385

[CAD]Law Extension:Change distance tolerance,after vector is reversed

2242392

Some commands cannot be found in Japanese env 

2242424

Hem Flange does not work on specified edges with "Material Inside_Outside" 

2242635

If the display of an object is changed, it will be in the status of OUT-OF-DATE

2242764

In [Merge Disjoint Facet Body], facet's Shading display changed 

2242938

Spline path's shape type 'Lock length' gives incorrect result 

2243057

NX 9.0.2.5 Power drafting issues after import of AutoCAD file 

2243201

Match Edge gives error as 'unable to build surface' when ref edge is a line 

2243238

Shipbuilding weld seam, drafting command doesn't work

2243565

CXPOM_wrong_class Error occurred while creating setup in NX CAM

2243707

Ordinate dimension-> Place Automatically behave strange after drag dimension 

2243819

The name of "Expressions" is not normally reflected by "Reuselibrary" 

2244840

UF_DRAW_set_view_display is failing to set hidden line width as Original 

2245086

Holes are not created when we do [Subtract] with outside work part as Tool 

2245493

NX cannot change History-Free Mode by Internal error 

2245777

Reset occurs to Transparency of solid body when using the MPV 

2245948

&CSLANT does not control text angle for NX font created in NX 9 

2246125

The thickness inputted as formal has changed to the constant 

2246501

When Descriptive Part Name Style is changed, PartName of PartList isn't correct

2246708

It is very slow to opening a motion data without loading its child dat

2246872

NX 9 hole table does not recognize all holes 

2247291

When I execute Part cleanup to drawing part, NX change position of Note 

2247292

[CAD]When I execute Part cleanup to the drawing part, NX break Note 

2247496

Update Error occurs by "Merge Module" 

2247508

Notation difference in a filename extension pull-down at import I-deas ASC_DWG

2247535

Drafting element is selected unintentionally 

2247548

Unable to merge facet bodies by Merge Overlapping Facet Bodies 

2247593

NX display line of spline that is made by studio spline on the drawing 

2248072

The created trim length exceeds "Minimum Length" value with the warning message

2248291

Cannot select lines after export 2D part with no associatively to 3D part 

2248471

Alert indication is not displayed in PNT though parent body is missing 

2248732

The behavior of Check Regions of MPV 

2248810

Unable to convert all drawing sheets to IGES in NX 8.5 

2248814

NXOpen C# Wizard creates external (batch) program that will not execute 

2248853

ExtractFaceBuilder.CommitCreateOnTheFly throws an error 

2248905

Wrong translation for "OPEN" in Reuse Library 

2248909

Copy Template as New Design in Reuse Library is not translated

2248936

UDF body color display changes when inserted 

2248971

UGMASTER is not assign when saving as New Item with Automatically Assign option 

2249161

Attributes using expression from Reference Text become incorrect Value

2249327

The name of body changes by split body operation 

2249328

The element in the non-indication layer of UDF is displayed 

2249356

Process of creating a dimension using "Rapid dimension"is slow

2249493

Cannot able to select the same dividing object datum twice in "Divide Face" 

2249504

Angular dimension is changed when execute plot

2249529

When exporting 2D to autocad, balloon circle disappears 

2249546

NX output wrong result with node information 

2249857

Can not save the suppress information when save drawing file 

2249910

NX crashes when double click on "Expression Check" 

2250055

The Vector arrow of Ribbon builder is not displayed 

2250205

Problem when inserting in [Note] the expression including 2byte characters 

2250337

Extra NC path generated in Flowcut 

2250351

NC path twisted in particular area in flow cut ref tool operation 

2250474

Non Uniform NC path generated in flow cut reference tool operation 

2250476

A extruded tool path is created 

2250573

Dashed line changes to a solid line by NX Plot

2250687

In Transform, Mirrored Lightweight Body's (JT) normal direction is inverted

2250705

[CAD]Law Extension create incorrect surface without error 

2250808

Exceptions occur when ug_body instance uses 0 for color in NX 9 

2250942

Engage of non cutting moves is cut over 

2251030

Adjacent spline path's shape gets changed when double-clicking a spline 

2251097

Inconsistent about the display of SubCategory in Material Information 

2810191

Ballons don't update during the update of a part family member 

6248511

Bend taper fails if applied to bend on bend 

6305080

Note linked to an interpart expression rounds differently 

6386183

Datum associated to stacked FCF produces gap 

6400356

Geometry Linking Failure 

6424822

CenterMark referencing ThreadCircleSymbol will be retained in update 

6472032

Center marks become retained after updating view 

6487324

Invalid section string definition 

6496575

It is copied by wrong distance 

6498114

Unable to create angular dimension 

6498459

Routing: Neither endpoint of segment near RCP 

6499312

Internal error during transform path 

6502266

Angular line at current segment option not applying Fine Finish Offset correctly

6559724

Dimension missing gap on centerline 

6561267

UDF with Feedback expressions - Apply does not create new expressions 

6566556

Retract move not in Inverse time (FRN_G93) feedrate mode. Engage and Cut are

6570966

Fourth axis limit violation fails and then outputs incorrect A word 

6603636

Planar Profile tool path is not following the pre-drill point 

6631793

Linked ports created by filter setting Face_Two Lines are not have associatively

6632138

Assembly Exploded View Trace Lines do not translate into sidecar.jt 

6634232

Drafting dimension extension line gaps not reliable

6647078

P8.0.1 - Transform path on routing branch removes corner bends in other areas

6681423

Routing corner angle dimensions are off by small amount 

6687752

After generation the main dialog has a new option 'Verify Pre-Drill Points' 

6700641

Unable to use function "Path Length Annotation"-part of Drafting module in NX 7.5

6713291

Show = False on a Tab Page hides container items rather than the Tab itself 

6717554

After execute Import Bend Radius Table command, it could not find Bend table

6718129

If segment end RCP selected on Transform Path, it was moved only RCP

6718165

Number attribute value rounds when added as a relationship in the Note editor 

6718800

Replace Stock is not working if overstock created only with Routing connection 

6720314

Incorrect stock display for Transform Path from one routing path RCP to other 

6720951

Transform Path is not working for distance value measured by Measure distance 

6723898

Cannot use Discontinuity RCP as path start point 

6725087

Post builder; not getting circular moves output for G18 plane 

6732556

When creating a formboard get the message "an attempt was made to associate ....

6745860

Define Run-> Member Items does not auto-select Path 

6747193

Tabular note cell text is not updated with attribute value after import part 

6751549

Transform path- incorrect results moving "TEE" & branch along path 

6754338

Radial Bend is leaving connector and removing stock on Formboard 

6776759

The same title cannot be used on two different attributes error opening assembly

6783887

Transform Path move or copy does not succeed on entire harness 

6787919

Unable to open part file due to same attributes of different type 

6792884

Empty line is removed from posted output file and when viewing in synch manager 

6796983

CenterLine is not adjusted to manual boundary 

6802602

PMI Datum Target: Symbol leader not associative to point in assemblies 

6816157

Routing Length: "The same title cannot be used on two different attributes" 

6832974

Rotary axis incremental and sign determine direction causes wrong output 

6844669

Spline path end node hanging when using Control D in Routing 

6851770

PrintPDFBuilder Commit fails when used on a non-displayed part 

6857961

Routing Run Nav Place Part not handling attributes correctly 

6867051

Incorrect results from Check-mate "Report Features without Children" 

6873282

Predrill Start Points order not followed in Planar Mill Profile operation 

6878962

Ordinate dimension will not associate to centerline 

6879827

Boundary order not following Region Sequencing -> Follow Pre-Drill Points 

6880816

Check body not being recognized. Tool is cutting through it 

6886712

Error saving JT: Failed to import remaining data from foreign multi-CAD file 

6888187

Documentation specifying nx_pmi_attribute leader_leaders leader_value is vague 

6888421

Reference style on tolerance pull down for dimension edit 

6891680

Autoroute fails in Electrical Routing NX 8.0.2: "Stock not found" 

6892275

Transform path on a RCP creates unwanted edits 

6892318

Adding Bend causes undesireable edits turning Transform path 

6893189

Convert Legacy Spline to V9 Spline on Selection for Edit 

6898282

Mechanical Routing: Transform Path not updating edited path as expected 

6907497

Dimension line passes through appended text when dragged 

6910642

Transform path affecting paths down the route 

6910694

Transform path does not dynamically update paths

6925479

Customer Default "Teamcenter Ship Name Format" option for Item Name vs ID 

6932644

Lock axis with right angle head fails 

6938319

Predrill Start Points order not followed in Planar Mill Profile operation 

6939350

2D Centerline used to dimension Flange radius sends leader endpoint into space 

6940940

Possible values for mom_rotation_mode incorrectly show ANGLE instead of ATANGLE 

6942194

Getting incorrect results on stock bends when transforming path_stock 

6955239

Law Extension Builds out of tolerance with no warning or alert 

6962826

Null tag not allowed to edit ordinate dimensions 

6968811

NX 9.0, Edit Spline path "Detach" is not available 

6972365

Part Cleanup (Delete Unused Fonts) changes the Symbol Font File Font 

6976274

Routing stock inverts at bend corners 

6980142

Unable to open CAM file in NX 9.0.2 and up

6987003

Routing Assemblies are Modified when opening in the context of a Reuse DE 

6987730

NX 9 Drafting save Work Part only. takes about 1_2 hour 

6988503

Circle_Helix moves are not linear moves in NX 9.0 when 840D UDE Compressor is ON 

6988562

Adding support to translate the smart lightweight views using 2D Exchange translator

6991672

Opening a JT file, what defines the units _ comps are scattered

7001160

Part clean up "delete unused fonts" switches the symbol font 

7104392

No information on mom_operation_has_path variable 

7112865

Exporting face mills to update libref fails to update - creates new libref 

7121536

If a block template name begins with a number, NX issues a parse error 

7127193

NX Thicken not removing Gashes 

7127252

Routing Electrical - No tangency created when creating a branch path 

7127258

Routing Electrical - Extensions at fixture ports can cause RCP to be offset to e

7127261

Routing Electrical - Duplicate RCPs can be created when connecting one spline pa

7127797

SME bridge curve UI dialog memory issue 

7128731

Engage going opposite direction when comparing NX7554mp10 to NX9013 

7131552

Export CGM or Save drawing CGM data is creating large files 

7132153

Fixed contour operation cut region tool collision avoidance gives internal error

7135193

Internal error Subdividing a path that contains Slack.. 

7141930

Excel automation com error code 80010100 creating part family 

7149735

Update formboard will not save last update 

7151420

Unable to export PLXML netlist 

7151453

SIMPLIFY PART HAS UNEXPECTED RESULTS 

7153468

PDF Export of Drawing has extremely poor performance 

7155067

NX: Part is showing "Missing Reference" alert after interpart update 

7158156

Tool path lock remains locked in current version 

7159379

Given object does not have the required csys matrix to create angular dimension 

7162788

NX 8.5:suspect geometry warning with no tool motion; nx8.0.3 has tool motion 

7162958

Raster image causes Internal Error when creating Part Family member

7166681

Reusable object created result in user defined expression name lost 

7166980

Smart Lightweight view performance issues 

7170902

Import plmxml files into Electrical Connection Navigator crashes NX. 

7172711

Properties attribute column width is not maintained if modified 

7172738

Contour profile operations will not generate; operation terminates 

7172867

JT_NX mismatch in component positions 

7173718

Surface Finish symbol exported to JT is rotated 

7178300

NX 8.5.3.3 MP1 plot generation take an excessive amount of time 

7179210

Editing a datum feature symbol creates unwanted Jog 

7179278

NXMGR: Replacing assembly part family template with member gives error 

7179528

Relations and Interpart link browser fails to show linked curves 

7179535

NC: Unable to open file in NX 8.5:null tag not allowed after upgrade from NX 6 

7181152

mp6 udf fails when changing udf scale from 2 to 1 

7182280

NX 9 Routing Spline path conversion performance 

7183415

Creating a hole, sketch csys goes to last hole created. 

7185242

DWG file in NX 9 is not maintaining layers - everything is placed on layer 256 

7185561

NX- Legacy material Library Issue - read error 

7185734

No link status change after PI name change; can't update 

7186716

Datum CSYS reorient will not recognize arc center point snapping

7186912

HD3D pop-up for Analyze Pockets has incorrect spelling - information 

7187083

PMI - Section curves of Lightweight Section disappear with the solid 

7187490

Optimization & Sensitivity fields snap back to their original size 

7187890

Scale value disappears with customized view label 

7188549

KF FrameXY issue in ug_udfs in NX 9 versus NX 8 

7188966

After using Adopt Existing Object, error creating new part

7189340

Elec Lock Length on a spline moves the component 

7189438

WELD ISSUE - Welds failed MDM Consistency check 

7189444

WELD - CFF no longer lists previously Connected part number 

7189451

Unable to select legacy welds to Export CSV 

7190075

Mirror feature - unable to recreate feature owner deemed the feature failed 

7190132

Crosshatch Settings dialog is not closing (open directory) handles 

7190615

UF_PART_reopen() does not post confirmation dialog 

7191032

NX-View Updates in Drafting 

7191225

IPW 'out of date' status is inconsistent 

7191819

NX 6 Environment Variable 

7192308

Routing assemblies cycle through updates to features of loaded part unexpectedly

7192332

PMI Custom Symbol leader arrowheads detached in JT export 

7192996

Save All should only save all showing in the preview list 

7194290

NX allows checkout of "out of date" subordinate DE's 

7194313

No Alert is issues if Weld Point is not on the top or overlap sheet 

7194316

Linked Face created on the fly are not put on the welding construction layer 

7194335

Drawing Revision block (Tabular Note) updates position in TCIN but not native NX

7195365

PR7489819 Linkpmi fails to finish PR7195365 Use proto tags to find underlying geometry

7195452

Line Profile FCF applied to multiple curves in PMI produces incorrect CMM tol

7196000

Published Welds are removed when file is saved without publish option checked

7196005

Welds re-publish to Teamcenter with new ItemID without a change to NX weld 

7196474

Log is displayed even after using UF_CLONE_set_logfile(NULL) 

7197259

Lock length changes the Shape of subdivided spline at the takeout point 

7199952

KF adoption different in NX 9 than NX 7.5 

7200065

Cannot create a single scan path XSECT pattern 

7200157

Edit Parameters with Multiple Feature Selection forces all Active Features 

7200243

batchShadeOptions crashes JVM the second time it is used 

7201310

GetEvaluatedText throws "Second parameter is invalid" NXException unexpectedly 

7201418

TORUS MINOR Diam shows 'Failed' in Measured Status column but actually passes 

7202422

Part file opens in NX 9.0.2.5 but not NX 9.0.3.4 

7204075

Electrical Cable editing is excessively slow in NX 9 when slack is applied 

7204201

Adding slack to a cable in NX 9 takes WAY TOO LONG compared to NX 8.5 

7204218

Importing CGM into a Front view breaks apart the CGM data 

7204219

Creating a spline path the performance degrades after selecting multiple points

7204248

Top level assy structure is wrong after UF_UI_ask_open_part_filename 

7204727

Selecting Named Centerline produces inconsistent results 

7205173

Unable to delete reference object in layer created by View Alignment 

7206011

Added Wire EDM Tool - Verified the Path - Path can not be edited... 

7206025

True shape customer defaults need honored, should not be controlled by registry 

7206111

Customize button on the radial toolbar and it doesn't stay after save user role 

7206387

NX 6 to NX 9.0.3.4 MP1 Turning "Cut Region" incorrect when regenerated 

7206451

Opening a previous version of an assembly deletes occurrences in TC 

7206498

Search in NX Manager is displaying wrong results, attribute is boolean 

7206903

Export IGES and is missing sheet 2 and later, only sheet 1 exports

7207057

Thread Milling Instances Lose Feature Geometry 

7207275

UNLOAD_WIRE & LOAD_WIRE output 

7207276

Standard Part Management Drawing Issue 

7208090

Syslog shows "Couldn't find object for" errors for check-mate checkers 

7208817

Corruption: Manufacturing part file cannot be opened Null Tag reported 

7208841

Creating Part Family members crashes-COM Error - 80010100 

7209357

WAVE Out of Date column has a Sys Delayed Link Out of Date on Layer 1 and 27 

7209392

Moving from NX 4 to NX 9, wave links are broken 

7209667

Hidden sketch curves don't display when Editing a Sketch 

7209788

KF - different behavior in NX 9 than in NX 7.5 

7210519

Moving from NX 6 to NX 9 and output rotation in DPM in NX 9 is wrong 

7210780

Suppressed Drafting Objects Displayed in DWG Export in NX 9 

7212173

Memory leak in NXOpen API involving annotation associatively data 

7212277

EvaluateAnyAsString throws "Internal error: memory access violation" 

7212599

Tool Axis specified as 'Vector' not maintained in an MCS when re-entering dialog

7213425

Linear dimension does not connect to Baseline

7214318

Absolute function is ignoring the unit it has been assigned 

7217444

Existing Validation Results Summary (VRS) Is Not Updating 

7217464

Differences between NX 8 versus NX 9 trim vector direction location

7217705

NX Shape Search error with UGII_GENERATE_MULTI_CAD_JT=1 

7217767

NX takes a long time to accept the selected feature that was picked

7218446

PMI light weight section not update when rotated about a point 

7218517

UF_UI_ask_ribbon_vis & UF_UI_set_ribbon_vis don't work for Groups 

7219284

UGMGR_Remote_cico Customer Default is ignored 

7219549

NX: Flat Solid fails and Cleanup Utility does not resolve 

7219655

Harness Un-Routes when running 'Part Cleanup' with the "Clean Routing Objects" 

7219749

Specification drawing fails to load due to 630035 null tag error 

7219767

Electrode Design: Patterned components have suffixes duplicate in BOM 

7219944

Send UGMaster dataset from TC to NX result in modified but no check-out state 

7220673

WELD - CFF unable to select face 

7221407

Electrode Design - BOM issue 

7222200

NX: export flat pattern does not keep layer settings from preferences 

7222326

Trying to place a component in Routing Electrical, OK not available 

7222627

mqc_drawing_askViewData does not return correct info for label and scale on_off 

7223654

IPW not updating, ONT column does not show IPWs as out of date 

7224120

Deformable Part not functioning properly in NX 9.0.3.4 MP1 

7225295

Progressive die wizard Collision check problem 

7226331

AFEM update resulting in Internal Memory Access Error 

7226332

Unable to delete certain features 

7227078

Macro playback fails when menu has a nonselectable separator line 

7227259

Notes linked to IPE are not updating when parent files in Excluded state in NX 8 

7227981

Reposition Component (legacy) - wrong results when using fractional input 

7227986

File fails to open 

7228118

Parallel generating hangs NX 

7228212

Manufacturing Assembly will not open in NX 9.0.3 but does in NX 7.5.5 

7228330

PMI Custom Symbol translates to jt incorrectly 

7228885

Export of a SE drawing using DXF_DWG into NX is poor  Line two times in Runner,appear Internal Error 

7230663

Offset Face feature doesn't display ! in PNT when needs attention 

7231190

Importing a JT file stacks all imported solids on top of each other 

7231606

Internal memory error when creating face on mesh 

7232084

THREAD MILLING - operations getting flagged as edited when retrieved into NX 9.0 

7232482

Not able to create XML output on a single part 

7232506

Excess Material is not taken over into XML Output for straightbrake parts 

7232686

Error adding exploded view to drawing 

7233945

What is "Nose Angle" on Customer Defaults controlling 

7234393

Dialog popping up Performance of almost all Manufacturing features are very slow

7234476

KF mqc functions for reporting template of family instance report wrong value 

7234532

Plate preparation on Planar parts need to be at the end of the feature tree 

7234573

Smart flag isn't updated correctly 

7234638

Plate preparation is not working on some Straightbrake parts(Not making it flat)

7234648

Textblock Position in XML output is sometime not correct 

7234953

CAM tool axis vector in MCS object not retaining after edit 

7235014

When the revision rules are changed variant rule is deleted_cleared

7235599

Shiptools placing profile_plate returns Unable to approximate guide string 

7235637

3919 Extension does not save the effectivity set on DCE 

7235745

Spline paths change significantly when they are converted to the New NX 9.0 spl

7238319

Check-Mate results are not getting updated after upgrade from NX 7.5 to NX 9.0 

7238823

NX Edit Boundary NX 9 replacement is not compatible to the NX 8 

7239696

Accidentally selecting Inspection module locks user out of CAM 

7239705

Cannot disable menu items in NX 9 using UF_MB_set_button_sensitivity 

7240036

Mold Wizard - tooling motion simulation run the second time fails 

7240515

Startposition for Cutcom is not usable when NO Engage_Retract is set

7240578

Auto Route in NX8.5 Electrical module fails to display the assigned wire stock 

7240702

Creation of detail view causes "unsuitable OM object" error 

7244999

[medium] Teamcenter Naming Rule not used for PTS Parts 

7245409

Symbol Font File is not loaded from Customer Defaults 

7245475

Cylindrical dimension using baseline does not work 

7245488

Not able to open part file in NX 9.0.3 -Plate preparation - directions are coplanar

7245509

Plate Preparation is not taken over the solid specified by METAFORM_LAYER 

7245561

Null tag error when manufacturing XML output is created 

7245578

Excess Material not correctly placed on the planar metaform solid

7246100

UF_ASSEM_deform_part() fails with error code 580025 

7246221

Question about Continuity 

7246931

G2 Continuity is not updated correctly in 'Match Edge' dialog 

7247038

PR2221699 was not fixed in NX 9.0.3 

7247370

The vector of "Fixed Tool Axis" is not stored in MCS dialog 

7247430

About the spline editing by X-Form 

7248034

JT part not visible in drawing after insert base view (view from part) 

7248110

Thread Milling hangs when selecting each hole 

7248301

Excess Material is not working on knuckled plates 

7248477

Move Object doesn't move associative text to specified location 

7248545

Cannot de-select run members to remove from run when workset is displayed part 

7248586

Identify command VKI Error Number 1 Function : vis_GroupSetEntFlag 

7248854

Optimization setup gives a memory error 

7248945

Electrode Drawing will not update to show the correct attribute information 

7249382

NX: Performance Issue with sketcher or drafting dimensioning 

7250527

NX 9 does not write Relative Transformation Matrix to TC10 

7250615

REG: Simple Pattern Feature of Groove fails to update in NX 10 

7250649

Query conic edge blend parameters 

7250725

Editing a Surface Wrap recipe checks out two "nx_adv_fluid_mod" licenses 

7250904

UF_CLONE_perform_clone returns error code 720100 

7250914

Error happens while output shop doc during the tool path verification 

7251156

Create interpart link option is not remembered by Routing Spline Path 

7251175

Modeler error opening a parasolid file 

7251203

CMM Inspection results do not match the results reports from eM-Measure 

7251305

NX 9 shows only 6 Error Estimates but NX 8 shows 7 Error Estimates 

7251934

Feed Slowdown in Corners value is not output into CL list in NX903MP2. 

7252286

Moldwizard cut pockets change color when component is moved 

7252306

LocalStorage not supported in NX9 internal browser 

7252381

Can't delete leader line 

7252915

To specify the boundary for CAM operation NX 9.0.3mp2 takes more time

7253005

Tabularnote with "Evaluate Cell as Formula" -> no calculated value in DWG export

7253230

Imported mesh does not conform to CAD geometry after morphing 

7253881

MeshName property does not set mesh name 

7254351

Bead Weld ignores Construction Layer Preference 

7254452

Flowcut-User defined cut order shows cut regions on part before it was mirrored 

7254620

Unable to add Base View in Drawing -> Error: There are no curves in the boundary

7254631

Empty Predefined View list if MW Assembly Drawing template doesn't contain note 

7254771

NX Part Family Assemblies fail in TcVis 

7254795

Wrong View Orientation using Electrode Drawing Template 

7254883

USER WARNING MESSAGE 2070 (MTRXIN) 

7255393

Force load applied as a spatial distribution is incorrect... 

7256378

File in use by another process error occurs while saving JT data 

7256749

Rules Based Structure Welding Callback Requires Weld Assistant License 

7256758

PatternFeature with boolean operation gives memory error when asking for bodies 

7259032

Internal error when trying to open a drawing 

7259085

Tool holder and IPW Collision in Cavity mill operation 

7259542

NX returns an Internal Error when opening a drawing if the ugmaster is open 

7259639

Element Modify Order does not work fine for the mesh made in the body with MMC

7259764

Wrong thickness of Belts 

7259871

Save As dialog does not function when Item_id and item_revision_id are mapped 

7260083

Flow cut operation does not generate Toolpath with the stepover value specified 

7260263

ug_extract_curve needs info on UpdateAtTimestamp parameter 

7260419

Offset in Face cannot create correct output 

7260939

Customer Default "Teamcenter Ship Name Format" not working with Naming Rule 

7261591

Order of commands of View Shortcut Menu is changed when restart the NX

7261643

Multi-CAD assemblies are opening as modified and being modified by update 

7261964

PDW Tooling Motion Simulation Mounted does not get reset 

7263544

Electrode Wizard Drawing template All Views have a wrong orientation 

7264204

No response from native NX Shape Search 

7266198

Table field - Spatial map: surface gives wrong result with meter units 

7267123

NX: Unable to open part in NX 9 - Error during Update 

7268516

Component color change has no effect on sketch curves 

7268524

Changeover Management doesn't change to second part when creating drawing 

7268811

No locked tool path when opening a NX 8.5 holemill operation in NX 9.0.3mp3 

7269620

Cannot directly open parasolid file in NX 10 

7269692

Square cut not working using Stiffener by support 

7271613

Edit Spline Path results in Modeler error: coincident control or spline points 

7272054

MEMORY_ERROR 

7272544

Cavity Mill Corner Slowdown not working 

7273528

Spline Path creation in NX 9.0.3MP3 does not have parallel constraint 

7273881

UFKf askListCount throws exception for an empty list 

7274038

Freebody result on cross-section of rectangular tube of solid elements is wrong

7274837

Interpart expression not being picked up causing component incorrect orientation

7275351

Can not change the width of the column of "XY Function Editor" 

7275902

Enable Multiple Revisions and Load Interpart Data(all levels) cause failure 

7276241

'Extend at edges' in Flow cut reference tool generates unexpected path 

7276455

Questions about setup NX 10 Doc server

7276469

Can't edit appended text in text fields on Gwif for PMI dimensions 

7277144

Legacy splines converted to NX 9 and perform transform path results in broken spl

7277922

UF_UI_select_with_single_dialog() displays garbled Japanese characters 

7278186

Analyze Formability odd Shape of Curves

7279064

UF_UI_select_with_class_dialog() displays garbled Japanese characters 

7280728

Promote body with View Section command 

7281152

NX 9 cam turning tools rotating in visualize to the proper orientation angle (OA)

7281186

Corner slowdown feed rates not being retained 

7283638

Angular dimension is switching to incorrect value after performing edit 

7283852

AssertErrorCode reports asserted error code rather than the one which was thrown

7285267

Tool path gouged the part in the combination of the bull-nose and Floor Wall 

7285563

Textblock text still not correct placed with XML output 

7285581

View Break problems with ShipBuilding Annotation 

7287051

Object supplied is of the wrong type using partial loading 

7288299

Lost customization when choosing "Save Role" 

7288817

Tag Error reported after deleting Blank geometry in a Floor Wall operation 

7289348

The symbol converted into DXF is not correctly displayed 

P291752

NXOpen GetBendParameters() fails on Blend with Bead with active Unbend feature 

7292256

NX 10 Hole Table has 2 Through Holes rather than 1 C'bore hole 

7297361

Transform linear path in NX 9 breaks the connected splines fixed constraint 

7303696

Error drill 

7304633

Reverse direction does not work in spline path 

7306094

Defect of "Suppress Hole" during 2D mesh Edit 

7306506

Lowest Save Z should be 3mm _ 0.1 inch for all hole machining operations 

7307005

GRIP truncates object names at 31 characters 

7307943

ELEC - Update_Delete has gone thru too many Iterations Error 

7309871

Surface finish symbols do not migrate correctly from Ideas to NX 

7311168

Export DXF option does not export the groups with geometric entities 

7311266

Excel does not close after "Cancel" in NX_Part Families dialog 

7312187

Built in Path does not move with deformable routing harnessTODO:VIS 

7314924

Routing Electrical Auto-Route Speed Issue 

7317562

Internal memory access violation in Mold Wizard Check Regions 

7320011

[CAD] NX_JT facet cannot fill out to Column of Comment in Part Navigator

7321443

NX routing hangs & freezes 

7321459

Issues with 2D Exchange 

7322223

When cloning the Motion object, an error occurs 

7323208

Tool neck is not taken into account in Gouge Check 

7323671

Replace stock command does not work for replacing overstocks 

7323850

Flow operation fails to find all cut areas when ref. tool is a button cutter 

7324151

Coordinate Plane Label, create Height Specification of an Air Duct_Cable Tray 

7324967

Post Builder does not store_lose canned cycles settings 

7325314

Unexpected route line appears after deleting an elbow component 

7326604

Deform Part Shows both deform and undeformed body 

7327280

PMI with custom symbol is WRONG on the jt model when viewed with TcVis 

7328032

Patch tool inconsistent in Mold Wizard 

7328486

Generated Java code has some spelling errors 

7328655

Can't see the tool path from a defined goto point in the machine control 

7329681

Can't enter appended text with environment variable set 

7330441

KF ug_odbc_recordsetOpen() fails subsequently after re-opening part 

7331569

About zero inner diameter for BEAM sections 

7331743

Letter of view label is changed unintentionally in Stepped Section Line

7331836

Problem selecting component face with ID-Sybol _ Balloon in section view 

7334954

Opening NX 7.5 CAM part file and regenerating in NX 9 produce 3 times extra output

7335606

Translucency of the blank geometry is changed automatically

7336750

Zlevel fails to generate 

7338346

Commands of "Graphics Window Manager" dialog cannot get recorded 

7339437

Symbols in Hole callout dimension appear bold 

7340006

Dimensions and annotations go retained when out of date NX 7.5 drawing is updated in NX 9. The problem occurs when a boolean operation is performed. This is a regression introduced by the fix for PR 2184195 in NX 8.5 and NX 8 MR

7340087

In NX 9, disappear component model in the view

7340136

[View Update] flip extension line gap

7340173

Leader location of the labels having no text changes on view update

7341153

Update Part Modules icon unavailable.

7343227

Symbolic Threads in Promoted Bodies are visible in PMI Lightweight Section View

7343657

Translucency - preference setting problem in Manufacturing

7345967

Values on dialog are incorrect when editing MAD

7347546

Missing bending information in XML output 

7347671

Search Reuse Library can't work when place Electrical Part with Logical Type 

7347820

Turning tool rotates on FROM point 

7348049

SimpleUDO Example Code will not work properly 

7350916

Material change in Modeling has no effect in Adv. Simulation 

7350950

SH_MASTER_PART_NAME in title block disappears when flat pattern view is placed 

7351827

Parts List needs to be updated twice to correct callout order

7352603

Sheet Metal - UAF: SM Solid Punch: Could not thicken the sheet tool body 

7353538

NX: UF_ROUTE_find_path not finding path when component is not on RCP 

7354585

Selection NX Assembly Component in an NX Assembly Model as an NX CAM Geometry 

7355284

Profile cutout in angle to target gives wrong cutouts 

7355564

Assembly containing deformed part always opens as modified 

7355778

Fixed contour cut region dialog does not retain overlap region setting 

7356726

The SM01 & SM02 cannot be opened & internal error-memory access violation 

7357253

Dimensions suppressed and should not be, when broken view is created 

7358110

Problem selecting component face with Quick Pick section view 

7358297

NX Search fails to find items with Display Rules 

7359169

Curve on Surface result seems incorrect 

7362888

NX 10: Supported DXF_DWG versions : 'version unknown' in logfile 

7366386

Cycle time incorrect for drilling operations due to non cut units = ipm 

7367322

Contour Area operation failed 

7367434

Surface finish symbol migrates incorrectly

7367650

NX questions 

7368418

Obscurity with Boringtools 

7368810

Expression linked to attribute breaks on Save As to new revision in TC env

7368871

NXMGR: Getting error saving files to new revision 

7369360

ScCollector > GetObjects takes a very long time to return tangent faces 

7370182

Base string specified name rule no found in part name is not displayed in NX 10

7370717

Tracking point issue with grooving 3d tool 

7370960

Ship design structure reporting double volume in TC mass properties form 

7371557

Event MOM_part_attributes missing in CSE simulation 

7371833

Thread Mill post output changes in different versions 

7372191

Postbuilder - right click on word in block cause "Forced" white bar to disappear

7372509

Reference Text Attribute does not update after a Save -As in NXmanager 

7372523

Delay Geometry, Expressions, and PMI Update cannot be resolved 

7372731

Part cannot be closed with 'An illegal file was given to the tag system' error 

7376506

Unable to save an NX 9 post in postbuilder NX 10.0.1 mp1 

7376627

Part Attributes that are synchronized are not updated using Edit Stock operation

7376769

xml out not working on part with chosen textheight for markinglines 

7376871

Unable to Create Surface Weld on Face 

7377508

Pre NX 9 saved namred references in Teacenter as

7377944

It fixes following issues 1. PR#7377944 Input list for refile with Dataset CLINames is not working as -part option 2. ugmanger_refile not honoring user specified load options 3.Native refile doesn't have -help switch

7379136

The problem where the datasetname for PDF export can be changed if it contains a colon or slash is fixed

7379509

NC: Internal error when updating views

7380212

File -> Print to PDF, first page prints OK, second page fails - v9.0.3 SPECIFIC

7380721

CAM Toolpath "ParallelGenerate" don't delete temporary Datasets in TC

7380792

Pattern feature on UDF gives incorrect results 

7381332

Texts are lost when translating to dxf (UGI_GROUP_EXPORT=BLOCK) 

7381714

NX 10 MACH ISSUE CUTTING REST MACHINING CONTAINMENT 

7382137

UDF with rectangular slots gives alerts after insertion 

7382199

Tire Envelope command creates incorrect geometry

7382213

File -> Print fails every second time with Internal error in NX 9.0.3.4 MP6 

7383182

Printing Problems with a 2 sheet drawing 

7384035

Need to disable View Tool Bar in NX 9.0.3.4 

7384414

VASC, engage_ retract swing angle not working for Against Part_Check 

7384816

Specify point block is not honoring snap point enabled property 

7384847

Internal Error 

7385572

Expression value will not update with delay part module update on 

7385619

NXMGR: Multiplying quantity of NX assembly components. 

7385674

Memory access violation while trying to print in drafting mode 

7385894

Area milling create the unnecessary toolpath between the cut area

7387531

Internal error trying to edit or regenerate a lathe operation

7387729

Deviation gauge impacts performance during edit of geometry 

7388095

File -> Print is returning an Internal Error on second File -> Print execution

7388900

About display the full list of item types in the New dialog 

7389230

Normal vector of the plane in which the line lies not correct for LINE feature 

7389532

NX 9 part will not open gets a Modeler error: Coincident control or spline points

7389778

Moldwizard sub-assy not updating to the INTER-PART expressions 

7390013

NC data is not output with Batch Process with Background mode 

7392030

NX 9.0.3.4 MP6 can not print more then one or two drawings 

7392113

Dimension value changes when opened in later NX version 

7392151

The overstock or stock function when using stock as component creates a new component but does not honor the seed file.

7392623

Leader location of the labels having no text changes on view update

7393312

Custom symbol leader arrow heads change orientation in TcVis for VDG 2.

7395405

A changed Path Display Colors will not remain for Mill User Defined operations 

7395408

Displayable Name in Teamcenter Navigator in NX - Display additional attributes 

7395622

Unable to create Hole callout dimension on a threaded hole 

7395844

mqc_askDimensions() function returns two tags for a single dimension in drafting

7396007

Annotations of deleted bodies not marked in drafting 

7396080

Parser (Python) error received calling OGE05 subprogram with comments

7396264

Getting an Internal Error when selecting a Hole Making operation in the ONT 

7396748

Separate Feature for Each Body option fails "Make Position Independent" 

7396828

NX351172: UPDATE_DELETE has gone through too many iterations, pattern of UDF 

7397031

Unable to open part NX 9 MP5Modeler error: coincident control or spline points 

7397240

The problem where the datasetname for PDF export can be changed if it contains a colon or slash is fixed.

7397281

Cannot use environment variable for MW_Wizard_View_Manager XML file

7397357

NX: bad size for allocation request in storage manager

7397818

Floor Wall operation not generate profile if two front faces on same side

7397826

Cannot save post in PB 10.0.1 MP2; corrupts post

7397960

PartSymbolFolderCollection does not work as expected 

7398128

How to set not to copy UGPART when "Save As" is executed in TCNX. 

7398159

Problema con la funzione Print (internal error_crash when printing twice) 

7398344

Printing problem 

7398600

Unable to display "Text to Line Gap" option if set "Text above Stub" 

7398751

In PDW Measure distance tool not working after strip layout process 

7398903

CAM Setup has not been stored inside History (because using gives Internal Error

7399045

Weld Assistant does not honor Feature Sets 

7399195

An invalid tag was passed to the tag module 

7399631

Post Builder post reports errors when selecting G Code tab 

7399914

NX freezes when we execute "View Update"

7399920

Unable to delete view 

7400098

The customized command icon does not appear when restart NX 

7400183

Unable to create TIFF file in NX10 from nxplot.exe 

7400254

Tilt Angle is not applied when generating the tool path from MB3 or BatchProcess

7400388

Error "Invalid geometry attached to operation" for Wire EDM operation

7400505

File -> Print fails every second time with Internal error in NX 9.0.3.4 MP6 

7400622

Transfer method ignored with floor stock 

7400742

Comparison Expression variables not assignable using Okuma Parser 

7401527

Failures with interpart expression in NX10, worked in NX 8.5 

7401549

Unable to export JT file, when I have added a radial PMI to a hole-feature 

7401873

Convert Mating condition doesn't work: "Object supplied is of the wrong type" 

7402243

NX 9 Post Builder dropping custom UDE reference 

7402494

PartSymbolFolderBuilder method getPartSymbols throws InvalidCastException 

7403036

The display result of 'View Section' is not consistent 

7403504

Point selection order determines associatively in Teach Mode Operation 

7403552

Refresh Before Each Path when de-selected still refreshes the path 

7404291

The node label can't be corrected 

7404604

Assembly components with occurrence type "MEConsumed" are not displayed in NX 

7404634

PTS Copy template as new design does not transfer classification to new item 

7405841

Cannot change selected body in concept from spreadsheet 

7407057

NX 10.0.1 Post Configurator post cannot be used in NX 8.5.3 as advertised 

7407411

Parts fail to Open using NX 8.5.3 MP9 after attempting to run refile 

7407434

Defpart naming is wrong after update 

7407552

Neat trim fails to trim when angle is too large 

7408111

mill_tool_change UDE does not pass variables to Post Builder 

7409177

Replace Component resulted in not loading object attributes 

7409329

WCS is moving to MCS when cam object is edited(MCS or Operation) 

7410068

Unreliable toolpath hole mill operation with temporary geometry 

7410142

Error at a choice «Fanuc» or«Heidenhain» in NX postprocessor 

7410245

Deleted (-77) shows up in "Show Out of Date Objects" 

7411220

Routing: wrong engagement value in mm-inch couple part-assembly 

7411333

CUTCOM creates additional Circle which returns in a full Circle Move Simulation 

7411917

Deleted or Invalid Class ID error on sim file export 

7412011

Unable to revise part family member in excel, if original part already existed 

7412848

Unable to Create Surface Weld on Face 

7413284

Getting "Tool Holder Clearance must be greater than or equal to zero" 

7413303

Performance problem when loading assemblies 

7413532

Updating part modules updates out of date features multiple times 

7413692

NC assistant misses a face with Levels option

7413716

Material properties related help statements refer to incorrect system attribute 

7413734

Editing a custom electrode blank component terminates NX 9 session 

7414817

UF_SF_locate_material() cannot get material tag from 2D mesh 

7414899

NXOpen GetBendParameters() returns weird bend angle value of 1145915 as of NX 9 

7415877

Measure Bodies causing NULL tag error when measure certain assembly 

7416422

Wrong behave of Attributes (ENG OK but GER not OK) 

7417089

Create 0D Elements -- Incorrectly changes all Mesh Associated Data 

7417439

[CAD] The twisted shape is created by the "Tire Envelope"

7417550

Mirror electrode fails to clone blank part from TC in NX managed mode 

7417597

NX hangs when the operation name which has 128 characters is copied and pasted 

7417645

Gallery name is displayed incorrectly 

7417650

Some icons are not shown when restart NX if using a customized mtx 

7417795

Incorrect rotary axis movement for Fanuc G91 

7417994

Mesh update slower in NX 9 and NX 10.0.1 compared to NX 8 

7418280

Attributes do not update in Part Family members after modification 

7418501

Viewers don't see assembly level color with NX managed data 

7418523

NX ShapeSearch fails for Body with UGII_GENERATE_MULTI_CAD_JT set 

7418531

NX: Info.WeldInfo object LogMessage outputting inaccurate message

7419493

A part which has Linked Compoiste Curve created beore NX751, and has source parts completely unloaded, may show curves in wrong position after Part Import

7419790

Subops in Generic Motion templates are limited to a certain amount 

7419848

Zlevel profile operation violates the part geometry 

7420183

Unable to keep sorted result after output spreadsheet by customized BOM template

7420240

Inconsistent result when changing spline path length on a new\existing part 

7420328

Internal error occurs while opening NX drafting part

7420433

Add additional column "last modifying user" in open part file dialog in NX 

7420440

Teamcenter Navigator in NX - custom attributes are shown with real name 

7420442

MW Drawing inherits Symbol Text Font from Defaults with own Drafting Standard 

7420858

Tool holder collides with part geometry in floor wall operation 

7421004

Reduce Ordinate Dimension origin label size, changes to default editing dimension

7421361

Linear Counts on cutter path increased from 75 to 547 

7421708

GetTaggedObjectVector & GetSelectedObjects does not returns selected object 

7422218

Prefix_Suffix location from shipbuilding dimensions will be switched 

7422566

Copying a Tool in NX causes the tool to disappear from TC View display 

7422712

Getting large Initial Move from out in space at absolute CSYS zero 

7422960

Copy and paste of a feature can't be done

7423221

Existing attribute does not allow to edit the value 

7423310

Cannot select the Coincident Curve of Face blend

7423766

Bug in tcin_cam_template_setup.bat - tries tcin_cam_template_setup.bat.bat 

7423882

Pre-NX6 group resize Grow_Shrink -> None (please backport PR 7393956) 

7425246

Overstock not processing Reference Characteristics 

7426049

Regression problem: File works in NX 6 but cannot open in NX 8.5 

7427065

Operation does not generate because of "Internal error" 

7427386

Save As New Item Type with different Rev ID as assigned is not possible 

7427456

Repeated use of UF_PARAM_CLRPLANE_USAGE makes NX crash 

7427544

Node drag is not working in NX 10 

7427641

DXF converter is not reading options from the dxfdwg.def 

7428456

Part Family Member part is modified message after post placement of gasket 

7428706

Assembly constraints not immediately displayed when placing routing part 

7428719

Routing Reuse Search dialog does not show values for search criteria 

7428739

Rename non-master by saveAs New Item in NX is no longer possible 

7429441

ExportAfu() cannot export correct magnitude and phase values in external mode 

7429662

Opening part family dialog is takes more time compare to earlier version of NX 10

7429756

Internal error occurs when point dialog icon on "Select Object" block is pushed 

7430627

Feed and Speed -> Failure while generating Toolpath 

7431105

The problem where NX STEP AP203 and AP214 translator products are not exporting and importing Nested External References files is fixed

7431329

Delete core pin causes part model linked body in core file to be deleted 

7431439

Old Alt Rep component replaced in SM BOM continues to load when sent to NX 

7431930

The user cannot select point & snap point on point dialog in drafting view 

7432001

[CAD] By specifying the "Lock to View" can not control the helper line

7432003

Clearance handles are not shown when selecting curves with zero clearance 

7432113

File open performance is worse in NX 10.0.1_TC10.1 than NX 8.5.3_TC9.1 

7432166

Auto Weld Symbol not working in 

7432774

Reversed offset direction in mirror feature 

7432928

Search object By Name fails with internal error 

7432988

The problem where the template region overflow logic should play role only when contents from different regions overlap each other (this is mentioned in TDoc) and not when the content of high priority region crosses over the boundary of low priority without crossing/overlapping the content in low priority region is fixed.

7433907

Unable to save as Specification drawing when Save as new item 

7434233

Layer changes when export to dxdwg

7434936

NX Crash on AskEdgeFeats call on specific assembly drawing 

7435201

The problem where the customer cannot save their Routing assembly due to stock descriptor characteristics (i.e. DB_PART_NO) being applied is fixed

7435507

While moving assembly file,it throw error "Parts in this session may be corrupt 

7435528

Start SpreadSheet of PartFamily in NX 10 takes more time compared to earlier version

7435547

Closing part family dialog takes more time compared to earlier versions of NX 10

7435658

Opening part family dialog is takes more time compare to earlier version of NX 10

7435666

While add component and loading in NX 10 takes more time compared to earlier version

7436198

Centermark does not shows correct position after changing the hole position. 

7436385

MKE does not accept special characters in UDE Label 

7436438

Different numbers of curve if Edit parameter or edit with rollback is selected 

7437460

Batch Process only calculates the last operation selected on ONT

7437576

UF_MODL_export_udf() is limited to 13 parameters 

7437744

Custom cycle GROUP is always open, even though DEFVAL is "start_closed" 

7438056

Invalid Filename while open parts with NX 10 because of desc part name style 

7438229

Hide Business Object rules in BMIDE cause item to not display or searchable NX 

7438787

CAM: Can not delete some Milling Operation 

7439067

MW Standard Part cannot create geometry expression link from different parts 

7439169

Edit arrowhead in mixed state to Closed Solid Arrow fails 

7439339

Part cleanup generates retained 2D centerlines 

7439411

Cavity Mill Profile gouges Part 

7439445

NX: The specified expression variable does not exist 

7439794

Attempting to delete category 'ALL' corrupts session 

7440155

[CAD]"Make unique" command cannot control the copy behavior of Direct Model 

7440262

NX hangs and crashes Fatal error 

7440282

Save part family in spreadsheet takes more time in NX 10 compared to earlier version

7440284

MW Standard Part position on plane incorrect depending on point selection method

7440387

Design part not replacing the seed part when creating a MENC file using File-New

7440419

Wrong dimension values in Ordinate Dimension 

7440684

Channel 1 and 2 swap places when opening sync manager 

7440762

Cannot Weld Pipe to Pipe with Hot Fix

7440907

General Packaging - Windshield Vision Zones & Wiper Zones not correct

7441308

After part cleanup if you save the work par then an error occurs (Attempt to save bad pointer, save aborted)

7441821

Edit Attributes in NX shows two non-editable fields for Value in German UI 

7442102

Cannot get values of interpart expression references in NX 10 anymore 

7442175

Drawing shows out of date (!) in header unable to update 

7442375

Unable to save to a new rev. via part family

7442664

Overlap Distance is not inherited from the template part. in Area Milling

7442666

Tool path at the steep area is not connected correctly with Z level ZigZag

7442928

The total resistance value of the solver input data is zero 

7443347

Loading a specific role when starting NX is not working 

7444361

Not possible to save Assembly as Altrep 

7445049

Edit Line Segment - Detach Active Control Point changes pipe angle 

7446190

Error XML out in NATIVE SHIP DESIGN APP NX 9.0 

7446738

Cannot open the FEM file 

7446913

A problem that does not open the OP2 file of MSC Nastran 

7447052

Error XML out Ship application. 

7447661

.NET remoting no longer works with an external server process 

7447946

Getting an "Internal error" when pressing "All other Parameters" icon

7448083

NX 10 with TC takes a huge time to open the dialog of "part family" 

7448089

Start Spreadsheet of Part Family in NX10+TC takes more time compared to earlier 

7448096

NX10+TC takes huge time to save "Spreadsheet of Part Family" compared to earlier

7448104

Closing Part Family dialog in NX 10+TC take more time compared to earlier version

7448108

While add component and loading in NX10+TC takes more time compared to earlier 

7448143

Selecting elements based on polygon geometry using related elements does not work

7448145

Component status not returning properly 

7448270

Machining Knowledge feature teaching and angular dims of conical surfaces 

7448382

PDW - Initialize Project - Internal error: memory access violation 

7449784

NX 10 fails to load Parts having expressions 

7449991

MW: New project drawing does not show images in the titleblock in NX 9 

7450283

Polygon Edge cannot select once it fails in "Stitch" 

7450423

Unable to de-select the Pole by "Shift key + select Pole" in X-Form operation

7450599

Missing Home Button in NX10 Web Browser 

7450940

CAM Batch Process is executing only the last operation 

7451146

File > Close: illegal file given to tag system due to exploded view in drafting 

7452545

Auto Part Size, Diameters 

7452717

Shortest Tool stopped working after upgrading from MP2 to MP7 

7452858

Post error on cycles if tool does not fit in hole 

7454195

Assembly raises Update Event Viewer when opened in NX 10 

7454752

NX 10 cannot open files from Teamcenter when User has log on name with Umlauts 

7454784

[CAD] When saving a UDF in TCNX, an error is displayed 

7455488

General Fault Exception when trying to divide cut regions 

7455564

Wrong excess material in Analyze

7455796

GRIP EDTEXT causes "Stack Overflow" and terminates NX 10 

7455899

Tooling Manufacturing Geometry doesn't maintain Face Rule setting 

7456072

Tooling Manufacturing Geometry UI hangs up and NX needs to be terminated 

7456166

Problem where STEP file containing locale characters was not importing correctly is fixed

7457681

File size has increased 10 fold (7385237) 

7458015

Unable to create hpgl file through nxplot.exe command line in NX 10.0.2 

7458337

Internal error: memory access violation (11) while opening assembly file 

7458745

Tire Envelope Wizard yields a sheet body which cannot be used in modeling operat

7458765

Routing:Null pointer supplied to Routing 

7459058

FitCurveBuilder - problem extending both Start and End 

7459212

Follow Predrill Points are incorrect in Cavity Mill 

7459258

Stop At Intersection does not work correctly in provided case 

7460164

Macro playback with long part file name fails with IE or terminates NX 

7460165

FBM: Calculation of ThreadLength attribute is wrong in NX 10.0.2.6 

7460678

Can not open the assembly file 

7460903

Invalid part tag - Error occurred in editing a Reusable Component 

7460914

Input is not a valid parameter when changing font size in table note 

7461011

DecalBuilder.SetImageFromPart causes An illegal file was given to the tag system

7461153

Error "Invalid File Name" when loading Parts with referencing InterPartExpr 

7461207

FBM_HOLE_MAKING: 'COUNTER SINKING' does not support 5-PAR. MILL with Tip Angle 

7461299

FBM_HOLE_MAKING: 'HOLE_CHAMFER_MILLING' does not support 5-PAR. MILL 

7461929

Part and IPW in Intersection Strategy does not work correctly

7462429

Overlapping columns in the HTML file created by Export to Browser command 

7463185

Start and End reversed after adding End Cut(Flared 2-Side) to BUP Stiffener 

7463255

Select an object to edit the leader "Internal error" occurs 

7463269

In special case, Operation Runner function appear error, and can't work

7463342

Internal error when try to create Joint Mark in 4GD mode 

7463501

Structural Welding cannot generate Weld Preparation on ends of a Profile 

7463992

Same issue as PR 7340087 - component disappears in model 

7464051

NX 10 post does not output correct UDE cutter compensation register value 

7464751

Countersinking does not work with Standard (Twist) drilling-Tool 

7465928

PMI Cylindrical Dimensions have incorrect extension lines 

7466062

Internal error when change Depth per Cut 

7466193

Wrong NX 10 attribute dialog when using the German user interface 

7466281

Weld Publishing of Pipe Welds Doesn't Work with Our Latest Hot Fixes 

7466597

NX: GRIP EDTEXT causes "Stack Overflow" and terminates NX 10 

7467273

The display of assembly parts for grooving tools with an tool tip junction at a different corner then the first was wrong

7467425

NX 10 hangs when using "Body(s) Without Assigned Material" and a promoted body 

7467555

Neutral Factor Value in unfolded view with SB Convert To Sheet Metal problem 

7468391

Failed mapping units in information window when you import materials 

7469125

Coolant Flow defined within "DEEP_HOLE_DRILLING" is not printed to CLS" 

7469153

There is no "Depth Increments" in Deep drilling with chip breakage Cycle 

7469161

Dwell at Starting Point is not outputted into CLSF in DEEP_HOLE_DRILLING

7469163

Datum feature symbol is not created correctly on FCF having stub length zero

7469284

Internal error: memory access violation error occurs while opening part file

7469432

GRIP EDTEXT causes "Stack Overflow" and terminates NX 10 

7469599

Light on polygon body issue in assyfem context

7469700

Object Type wrong if ASM will be load by "partial loading" 

7469857

Error with "point to Face" 1D connect: a tag was passed belonging to an object

7470336

Old tool path not removed from graphical view when generating from oper dialog 

7470464

Unknown region is displayed in the graphics window when you create a FEM

7470623

Dialog for Partattributes corrupt in German NX 10.0.2.6. Version 

7470757

Unable to open Drawing File with "Null tag not allowed" error

7471437

Edit Angular dimension requires re-defining it where Settings does not 

7471779

Memory Access Violation while open a UGMASTER partfile 

7471816

Memory Access Violation during view update 

7472467

Tool Paths are not refreshed when the operation is regenerated 

7472594

Samples machines posts sim01 thru sim09 won't open in Postbuilder 

7473258

General Relinker description incorrect 

7473423

Cycle Force display strange in post builder 10.0.2 

7474064

The specific dimensions has become a cause that causes an error when "Part clean

7475859

Invalid Filename error when fully loading components 

7476349

Operation not refreshing old tool path when re-generating 

7476697

Wrong value is imported in <(kgf)(mm)(kgf-s^2_mm)> unit system

7476719

EX: GRIP EDTEXT causes "Stack Overflow" and terminates NX 10 

7478090

Leader location of the labels having no text changes on view update

7478092

Attributes dialog contains 2 unusable input fields for value+wert in German UI 

7478292

Edit Plate Thicken option from two sided to symmetric doesn't work properly 

7479634

NX freezes when defining constraints during add component

7480074

Display button does not refresh image files 

7480118

A Documentation operation can be assigned a tool for reference purposes, but does not contribute to motion in the tool path, so the operation should be ignored when judging for a tool change.

7480165

MOM variable mom_tool_number does not update 

7481066

NX MCD crash _ unexpected behavior with objects created by source 

7482641

"Problem description:

1) When Item objects are classified in the classification tree, we do not load them properly into the NX session via the Routing re-use library

2) When a classification hierarchy is defined with intermediate nodes as type StorageClass (instead of abstract), we do not find the start nodes properly during our search

Problem solution:

1) For Item objects, set the TEMP_PART_SPEC correctly in the charx data for the individual member rows so that we know that we have to look up the specific revision based on the current revision rules when we go to load the part into NX

2) Traverse the classification of the hierarchy, including StorageClass nodes, to find the starting nodes for the Routing re-use library tree.  We actually reversed the search order and no longer due a depth first search, find the Classificaiton node with the specific identifier and make sure that node lives under the passed in start node.  This is much more efficient and does not require searching the entire classification tree."

7483079

Unable to open part files with "Attempt to free already freed object" error 

7483306

UF_cs2_constraint_type entity error in checkmate 

7484543

Tooling Stock Size shows wrong dimensions with existing pattern feature in part 

7485037

NX 10 does not recognize template parts in TC11 

7485152

Create a box function changed in NX 10 

7485419

CLSF Export Bug When Exporting Multiple Toolpaths in a Project Group 

7486816

The tool path API support for Helix motions was incomplete and had a couple of issues that needed to be addressed

7488773

Internal error caused when saving part file

7492187

These issues are EB related issues and solves the LWSV cases

7492862

When moving some sliders on the legacy Standard Part Management dialog box, the labels are being truncated

7498845

The problem where the datasetname for PDF export can be changed if it contains a colon or slash is fixed

7500262

An error occurs when deleting an operation

7500467

Progressive Die Wizard Collision checking is not accurate. When running the Collosion Check on the provided Transfer Die, the whole upper die is highlighted as a collision when in fact it should be a few components

8250013

Teach Mode - Cut pattern changes 

8250187

Opening Replica Assembly -Error " Attempted function idsm_distributed_app @site 

8250222

Curve Length fails 

8250244

NXOpen doesn't return contained features of Pattern and Mirror instances 

8250484

Encountered Null pointer attempt to convert MultiLevel Flex mating conditions 

8250508

PMI LightWeight Section View doesn't move section entities to other layer 

8250513

File > Save fails with the message: BVR is not checked out 

8250570

Performance issue to convert Wiring cable V1 to V2 specific Locked Length Spline

8250633

Blend Corner fails 

8250957

Reuse library symbol in drawing title block is not translated to DXF_DWG format 

8251000

NX Measure Point - Show Dimension display incorrect values 

8251033

Top Selection Priority in quick pick changed 

8251149

Global Shaping updates to error since MP2 

8251168

Adding an NX 6 UDF does not work anymore with NX9: cannot paste sketch 

8251179

In the old part family template if we add any new member at last row, the last row was getting replaced with existing member at first row

8251385

Standard parts created does not get recognized by Cutting Side 

8251440

2D Exchange translator doesn't handle file errors 

8251510

Note -> Insert Object Attribute doesn't list any drawing sheet attributes 

8251644

Law extension - merge faces results in gap 

8251660

JT - Name of NX-Facet-Body is not converted 

8251785

Unable to update views on drawing 

8251844

Law Extension - merge Face if Possible - not update Stable 

8251875

Weld symbol edit failed

8251932

Große Dateien beim CGM-Exportieren 

8252012

Vehicle Design Automation: Close Range Visibilty - maximum length for blind vo

8252262

Unsuppress of last feature takes too long 

8252470

Curve Smooth does not work correctly 

8252485

Global Shaping does not work all around and not correct 

8252571

Baugruppe NX 7.5 kann nicht in NX 9.0 geladen werden 

8252781

Interpart expressions are multiplied by 1000 

8252795

Diameter Baseline Dimension not work for invisible Centerlines 

8252860

Deleting marking lines takes long time and ends with error 

8252994

Datum Coordinatesystem losses associatively when changing from offset to dynamic

8253096

UF_UI_set_minimal_graphics_window() regression in NX 9 

8253219

When edit a CAM Operation appears "Null tag not allowed" 

8253332

CAM: Paths unlocked manually are locked when part is reopened 

8253410

NX 10 MP - RR Issue 3616 - Results Probe with DR point function gives wrong result

8253785

Reg_NX 9.0.2: internal errors (Parasolid ifail 934 from ENPBEN) with NX 9.0.3 

8253791

'auto. coupling' constraint - opening .sim and switching from .fem to .sim slow 

8253806

Electrical Routing: NX crashes during renaming of Multi Port 

8253826

CAM Face_Mill_Manual Regions have Gouges - Wrong error message 

8253865

Part Name Management, cannot change to Reference if part contains drawing 

8253960

Zero thread dimension after updating the view (lost references) 

8253977

Switching between solutions slow if 'automatic coupling' constraints defined... 

8254175

Changing 'automatic coupling' constraint display affects '.sim' file open time 

8254277

RR Issue 3643 - Bug in Time Step Control - edited values are not retained 

8254350

Check mate failure 

8254369

MultiCAD: Error when saving parts with references to JT components (RC 580163)

8254534

WIR V2 Reattach Spline Removes Lock Length 

8254611

Intersection Curve is Out of Tolerance after modification of an area that has 

8254724

Law Extension Deviation 

8254760

Can't create a detail view 

8254798

PDW toolbar workflow reorganization 

8254861

Replace Feature of a Sew by a Trim and Extend Feature doesn't work 

8254867

Not able to open partfile or make it the displayed part in Assembly Context 

8254877

CAM Cavity_Mill Problem IPW and Holder Collisions 3 

8254940

Tool Axis Decimal Places Output Problem 

8255022

Find in Navigator - Warning 

8255041

Product Interfaces not visible in the target 

8255061

Reg_NX 9.0.3_D1 - Uable to pick PMI Centerline or Center Mark to create Linear Dims

8255065

SAE Manikin Wizard input field looses control to feature after reordering 

8255077

Error occurred when updating hidden line display 

8255092

Cannot create stock offset fixture port 

8255123

Using 'Stock offset Point' clears extension and back extension 

8255154

Relations Browser does not show links of fully loaded part 

8255182

Inconsistent display of new curve direction 

8255193

Problem with dimensions associated to view dependent centerlines 

8255229

Missing alert about legacy product interfaces 

8255235

Interpart Expression does not get updated after replacing component 

8255256

Weld Point Wizard Distance Tolerance setting 

8255270

Offset curve oif 50mm causes NX to hang 

8255298

It has to be possible to disable the "Resistance Spot" in Customer Defaults 

8255301

Not possible to change associativ translated weldpoint to fixed see PR1959880 

8255321

UDF loses color definition 

8255329

Display will freeze after undefined actions of big assemblies

8255338

Open a parasolid file leads to error 

8255360

Replace component breaks links 

8255368

Selecting node within group via "Nodes by Group" fails for single node group 

8255379

Call of a Builder in User Exit causes disorder in Part Navigator 

8255385

ID Symbols do not show text in NX 9.0.3, was fine in NX 7.5 

8255409

Unable to replace links in part 

8255420

In NX 10.0.1 ip1 we are not getting the same PMI report that we saw in NX 9.0.3 

8255422

Alert Internal error during update of weld points 

8255435

Incorrect Change Reason Status In the Synchronize Links 

8255496

Law Extension should give an alert when the desired miter cannot be created 

8255528

Link changes unexpected to pos. independent after synchronize in displayed part 

8255542

Selecting comp (ANAV Dependency panel) is slow

8255549

Up to date part displayed as out of date 

8255588

The Meshing of some solid body is not possible with NX 10 

8255670

Useless points after reopening a file with a projected point 

8256313

Pedestrian Protection - Wrong WAD curves 

8256356

RR Issue 3885 - Solver time heat transfer plugin - function builder ignores cert

8256625

Unable to open partfile -> internal error 

8256692

Regression: Method "Import" of the interface "UFPatt" creates the min-Max-Box 

8256925

ANAV: Error 11 while calling callback with reason 553 

8257809

G17_19 issue 

8257928

Memory access violation in NX 10.0 using KF ODBC 

8258457

Trim angle check is not associativ 

8258603

Spline Length Constraints cause poor performances when editing a RSpline 

8259018

Sketch lose Midpoint Constrain 

8259895

Exporting a Drawing with 2DExchange some dimensions lose the referenced objects 

8260340

Assign button for dataset name is missing 

8262206

When using Mill Boundary by Points, the first point gets lost 

8263130

Bad Performance in NX 9 Spline Path with 15+ points 

8263681

NX Sheet Metal - bead over cutout 

8263688

NX Sheet Metal - bead ending in cut out 

8266572

NX: Report Shortest Path gives a wrong result causing the collision path 

8268277

Replace of Thicken not possible 

8268280

PS27.01.209 - Feature Playback failed 

8268321

Performance problem of Divide Face 

8268602

Feature Playback Error T0929 

8268732

Update starts during load even if delay update is active 

8268751

Selection during Animation 

8268851

Failure returning outline of body at cut level 

8269080

File-Print crashes NX on second print 

8269298

In the Upper Roof Selection Wizard of the function Head Impact the correct req