WedmCutParameters Class¶
-
class
NXOpen.CAM.WedmCutParameters¶ Bases:
NXOpen.CAM.CutParametersRepresents a
NXOpen.CAM.WedmCutParametersNew in version NX7.5.0.
Properties¶
| Property | Description |
|---|---|
| CheckIpwCollisions | Returns or sets the value to Check for Ipw Collsions |
| CheckSafeClearance | Returns the Check Safe Clearance |
| CutDirection | Returns or sets the Cut Direction |
| HolderClearance | Returns the Holder Clearance |
| Intol | Returns or sets the intol value |
| IpwType | Returns or sets the IPW type |
| LowerGuideOffset | Returns the lower guide offset |
| LowerPlaneBuilder | Returns the lower_plane builder |
| NeckClearance | Returns the Neck Clearance |
| Outtol | Returns or sets the outtol value |
| OverlapDistanceBuilder | Returns the overlap_distance_builder |
| PartSafeClearance | Returns the Part Safe Clearance |
| PartStock | Returns the part stock |
| ShankClearance | Returns the Shank Clearance |
| Tag | Returns the Tag for this object. |
| Tolerances | Returns the Tolerances builder |
| UpperGuideOffset | Returns the upper guide offset |
| UpperPlaneBuilder | Returns the upper_plane builder |
| UseToolHolder | Returns or sets the use tool holder |
| WedmStepoverBuilder | Returns the WedmStepover builder |
| WireDiameterBuilder | Returns the wire_diameter builder |
| WirePosition | Returns or sets the wire position |
Methods¶
Enumerations¶
| WedmCutParametersCutDirectionTypes Enumeration | the types available for wedm cut direction |
| WedmCutParametersWirePositionTypes Enumeration | the types available for wire position |
Property Detail¶
CutDirection¶
-
WedmCutParameters.CutDirection¶ Returns or sets the Cut Direction
-------------------------------------Getter Method
Signature
CutDirectionReturns: the Cut Direction Return type: NXOpen.CAM.WedmCutParametersCutDirectionTypesNew in version NX7.5.0.
License requirements: cam_base (“CAM BASE”)
-------------------------------------Setter Method
Signature
CutDirectionParameters: cutDirection ( NXOpen.CAM.WedmCutParametersCutDirectionTypes) – the Cut DirectionNew in version NX7.5.0.
License requirements: cam_base (“CAM BASE”)
Intol¶
-
WedmCutParameters.Intol¶ Returns or sets the intol value
-------------------------------------Getter Method
Signature
IntolReturns: the intol value Return type: float New in version NX7.5.0.
License requirements: cam_base (“CAM BASE”)
-------------------------------------Setter Method
Signature
IntolParameters: intol (float) – the intol value New in version NX7.5.0.
License requirements: cam_base (“CAM BASE”)
LowerGuideOffset¶
-
WedmCutParameters.LowerGuideOffset¶ Returns the lower guide offset
-------------------------------------Getter Method
Signature
LowerGuideOffsetReturns: the lower guide offset Return type: NXOpen.CAM.InheritableDoubleBuilderNew in version NX9.0.0.
License requirements: cam_base (“CAM BASE”)
LowerPlaneBuilder¶
-
WedmCutParameters.LowerPlaneBuilder¶ Returns the lower_plane builder
-------------------------------------Getter Method
Signature
LowerPlaneBuilderReturns: the lower_plane Builder Return type: NXOpen.CAM.InheritableDoubleBuilderNew in version NX7.5.0.
License requirements: cam_base (“CAM BASE”)
Outtol¶
-
WedmCutParameters.Outtol¶ Returns or sets the outtol value
-------------------------------------Getter Method
Signature
OuttolReturns: the outol value Return type: float New in version NX7.5.0.
License requirements: cam_base (“CAM BASE”)
-------------------------------------Setter Method
Signature
OuttolParameters: outtol (float) – the outol value New in version NX7.5.0.
License requirements: cam_base (“CAM BASE”)
OverlapDistanceBuilder¶
-
WedmCutParameters.OverlapDistanceBuilder¶ Returns the overlap_distance_builder
-------------------------------------Getter Method
Signature
OverlapDistanceBuilderReturns: the overlap_distance_builder Return type: NXOpen.CAM.InheritableDoubleBuilderNew in version NX7.5.0.
License requirements: cam_base (“CAM BASE”)
UpperGuideOffset¶
-
WedmCutParameters.UpperGuideOffset¶ Returns the upper guide offset
-------------------------------------Getter Method
Signature
UpperGuideOffsetReturns: the upper guide offset Return type: NXOpen.CAM.InheritableDoubleBuilderNew in version NX9.0.0.
License requirements: cam_base (“CAM BASE”)
UpperPlaneBuilder¶
-
WedmCutParameters.UpperPlaneBuilder¶ Returns the upper_plane builder
-------------------------------------Getter Method
Signature
UpperPlaneBuilderReturns: the upper_plane Builder Return type: NXOpen.CAM.InheritableDoubleBuilderNew in version NX7.5.0.
License requirements: cam_base (“CAM BASE”)
WedmStepoverBuilder¶
-
WedmCutParameters.WedmStepoverBuilder¶ Returns the WedmStepover builder
-------------------------------------Getter Method
Signature
WedmStepoverBuilderReturns: the Stepover Builder Return type: NXOpen.CAM.StepoverBuilderNew in version NX7.5.0.
License requirements: cam_base (“CAM BASE”)
WireDiameterBuilder¶
-
WedmCutParameters.WireDiameterBuilder¶ Returns the wire_diameter builder
-------------------------------------Getter Method
Signature
WireDiameterBuilderReturns: the wire_diameter Builder Return type: NXOpen.CAM.InheritableDoubleBuilderNew in version NX7.5.0.
License requirements: cam_base (“CAM BASE”)
WirePosition¶
-
WedmCutParameters.WirePosition¶ Returns or sets the wire position
-------------------------------------Getter Method
Signature
WirePositionReturns: the wire position Return type: NXOpen.CAM.WedmCutParametersWirePositionTypesNew in version NX7.5.0.
License requirements: cam_base (“CAM BASE”)
-------------------------------------Setter Method
Signature
WirePositionParameters: wirePosition ( NXOpen.CAM.WedmCutParametersWirePositionTypes) – the wire positionNew in version NX7.5.0.
License requirements: cam_base (“CAM BASE”)