HeadImpactOPillarDetailBuilder Class¶

class NXOpen.Features.VehicleDesign.HeadImpactOPillarDetailBuilder¶

Bases: NXOpen.TaggedObject, NXOpen.GeometricUtilities.IComponentBuilder

Represents a NXOpen.Features.VehicleDesign.HeadImpactOPillarDetailBuilder.

This is an abstract class and cannot be instantiated.

New in version NX9.0.0.

Properties¶

Property	Description
CreateGeometry	Returns or sets the create construction geometry flag.
DaylightBottomLeft	Returns or sets the left Daylight Bottom additional geometry.
DaylightBottomLeftFlag	Returns or sets the left Daylight Bottom additional geometry flag.
DaylightBottomRight	Returns or sets the right Daylight Bottom additional geometry.
DaylightBottomRightFlag	Returns or sets the right Daylight Bottom additional geometry flag.
DoorTopLeft	Returns or sets the left Door Top additional geometry.
DoorTopLeftFlag	Returns or sets the left Door Top additional geometry flag.
DoorTopRight	Returns or sets the right Door Top additional geometry.
DoorTopRightFlag	Returns or sets the right Door Top additional geometry flag.
OP1Left	Returns or sets the left OP1 alternative point.
OP1LeftFlag	Returns or sets the left OP1 alternative point flag.
OP1Right	Returns or sets the right OP1 alternative point.
OP1RightFlag	Returns or sets the right OP1 alternative point flag.
OP2Left	Returns or sets the left OP2 alternative point.
OP2LeftFlag	Returns or sets the left OP2 alternative point flag.
OP2Right	Returns or sets the right OP2 alternative point.
OP2RightFlag	Returns or sets the right OP2 alternative point flag.
PT6Left	Returns or sets the left PT6 additional geometry.
PT6LeftFlag	Returns or sets the left PT6 additional geometry flag.
PT6Right	Returns or sets the right PT6 additional geometry.
PT6RightFlag	Returns or sets the right PT6 additional geometry flag.
ReqHorizontalLeftExact	Returns the left horizontal required approach angle.
ReqHorizontalRightExact	Returns the right horizontal required approach angle.
ReqVerticalMax	Returns the vertical maximum required approach angle.
ReqVerticalMin	Returns the vertical minimum required approach angle.
Tag	Returns the Tag for this object.

Methods¶

Method	Description
Validate	Validate whether the inputs to the component are sufficient for commit to be called.

Property Detail¶

CreateGeometry¶

HeadImpactOPillarDetailBuilder.CreateGeometry¶

Returns or sets the create construction geometry flag.

-------------------------------------

Getter Method

Signature CreateGeometry()

Returns:
Return type:	bool

New in version NX9.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature CreateGeometry(createGeometry)

Parameters:	createGeometry (bool) –

New in version NX9.0.0.

License requirements: nx_general_packaging (“NX General Packaging”)

DaylightBottomLeft¶

HeadImpactOPillarDetailBuilder.DaylightBottomLeft¶

Returns or sets the left Daylight Bottom additional geometry.

-------------------------------------

Getter Method

Signature DaylightBottomLeft()

Returns:
Return type:	`NXOpen.Point`

New in version NX9.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature DaylightBottomLeft(daylightBottomLeft)

Parameters:	daylightBottomLeft (`NXOpen.Point`) –

New in version NX9.0.0.

License requirements: nx_general_packaging (“NX General Packaging”)

DaylightBottomLeftFlag¶

HeadImpactOPillarDetailBuilder.DaylightBottomLeftFlag¶

Returns or sets the left Daylight Bottom additional geometry flag.

-------------------------------------

Getter Method

Signature DaylightBottomLeftFlag()

Returns:
Return type:	bool

New in version NX9.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature DaylightBottomLeftFlag(daylightBottomLeftFlag)

Parameters:	daylightBottomLeftFlag (bool) –

New in version NX9.0.0.

License requirements: nx_general_packaging (“NX General Packaging”)

DaylightBottomRight¶

HeadImpactOPillarDetailBuilder.DaylightBottomRight¶

Returns or sets the right Daylight Bottom additional geometry.

-------------------------------------

Getter Method

Signature DaylightBottomRight()

Returns:
Return type:	`NXOpen.Point`

New in version NX9.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature DaylightBottomRight(daylightBottomRight)

Parameters:	daylightBottomRight (`NXOpen.Point`) –

New in version NX9.0.0.

License requirements: nx_general_packaging (“NX General Packaging”)

DaylightBottomRightFlag¶

HeadImpactOPillarDetailBuilder.DaylightBottomRightFlag¶

Returns or sets the right Daylight Bottom additional geometry flag.

-------------------------------------

Getter Method

Signature DaylightBottomRightFlag()

Returns:
Return type:	bool

New in version NX9.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature DaylightBottomRightFlag(daylightBottomRightFlag)

Parameters:	daylightBottomRightFlag (bool) –

New in version NX9.0.0.

License requirements: nx_general_packaging (“NX General Packaging”)

DoorTopLeft¶

HeadImpactOPillarDetailBuilder.DoorTopLeft¶

Returns or sets the left Door Top additional geometry.

-------------------------------------

Getter Method

Signature DoorTopLeft()

Returns:
Return type:	`NXOpen.Point`

New in version NX9.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature DoorTopLeft(doorTopLeft)

Parameters:	doorTopLeft (`NXOpen.Point`) –

New in version NX9.0.0.

License requirements: nx_general_packaging (“NX General Packaging”)

DoorTopLeftFlag¶

HeadImpactOPillarDetailBuilder.DoorTopLeftFlag¶

Returns or sets the left Door Top additional geometry flag.

-------------------------------------

Getter Method

Signature DoorTopLeftFlag()

Returns:
Return type:	bool

New in version NX9.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature DoorTopLeftFlag(doorTopLeftFlag)

Parameters:	doorTopLeftFlag (bool) –

New in version NX9.0.0.

License requirements: nx_general_packaging (“NX General Packaging”)

DoorTopRight¶

HeadImpactOPillarDetailBuilder.DoorTopRight¶

Returns or sets the right Door Top additional geometry.

-------------------------------------

Getter Method

Signature DoorTopRight()

Returns:
Return type:	`NXOpen.Point`

New in version NX9.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature DoorTopRight(doorTopRight)

Parameters:	doorTopRight (`NXOpen.Point`) –

New in version NX9.0.0.

License requirements: nx_general_packaging (“NX General Packaging”)

DoorTopRightFlag¶

HeadImpactOPillarDetailBuilder.DoorTopRightFlag¶

Returns or sets the right Door Top additional geometry flag.

-------------------------------------

Getter Method

Signature DoorTopRightFlag()

Returns:
Return type:	bool

New in version NX9.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature DoorTopRightFlag(doorTopRightFlag)

Parameters:	doorTopRightFlag (bool) –

New in version NX9.0.0.

License requirements: nx_general_packaging (“NX General Packaging”)

OP1Left¶

HeadImpactOPillarDetailBuilder.OP1Left¶

Returns or sets the left OP1 alternative point.

-------------------------------------

Getter Method

Signature OP1Left()

Returns:
Return type:	`NXOpen.Point`

New in version NX9.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature OP1Left(op1Left)

Parameters:	op1Left (`NXOpen.Point`) –

New in version NX9.0.0.

License requirements: nx_general_packaging (“NX General Packaging”)

OP1LeftFlag¶

HeadImpactOPillarDetailBuilder.OP1LeftFlag¶

Returns or sets the left OP1 alternative point flag.

-------------------------------------

Getter Method

Signature OP1LeftFlag()

Returns:
Return type:	bool

New in version NX9.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature OP1LeftFlag(op1LeftFlag)

Parameters:	op1LeftFlag (bool) –

New in version NX9.0.0.

License requirements: nx_general_packaging (“NX General Packaging”)

OP1Right¶

HeadImpactOPillarDetailBuilder.OP1Right¶

Returns or sets the right OP1 alternative point.

-------------------------------------

Getter Method

Signature OP1Right()

Returns:
Return type:	`NXOpen.Point`

New in version NX9.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature OP1Right(op1Right)

Parameters:	op1Right (`NXOpen.Point`) –

New in version NX9.0.0.

License requirements: nx_general_packaging (“NX General Packaging”)

OP1RightFlag¶

HeadImpactOPillarDetailBuilder.OP1RightFlag¶

Returns or sets the right OP1 alternative point flag.

-------------------------------------

Getter Method

Signature OP1RightFlag()

Returns:
Return type:	bool

New in version NX9.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature OP1RightFlag(op1RightFlag)

Parameters:	op1RightFlag (bool) –

New in version NX9.0.0.

License requirements: nx_general_packaging (“NX General Packaging”)

OP2Left¶

HeadImpactOPillarDetailBuilder.OP2Left¶

Returns or sets the left OP2 alternative point.

-------------------------------------

Getter Method

Signature OP2Left()

Returns:
Return type:	`NXOpen.Point`

New in version NX9.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature OP2Left(op2Left)

Parameters:	op2Left (`NXOpen.Point`) –

New in version NX9.0.0.

License requirements: nx_general_packaging (“NX General Packaging”)

OP2LeftFlag¶

HeadImpactOPillarDetailBuilder.OP2LeftFlag¶

Returns or sets the left OP2 alternative point flag.

-------------------------------------

Getter Method

Signature OP2LeftFlag()

Returns:
Return type:	bool

New in version NX9.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature OP2LeftFlag(op2LeftFlag)

Parameters:	op2LeftFlag (bool) –

New in version NX9.0.0.

License requirements: nx_general_packaging (“NX General Packaging”)

OP2Right¶

HeadImpactOPillarDetailBuilder.OP2Right¶

Returns or sets the right OP2 alternative point.

-------------------------------------

Getter Method

Signature OP2Right()

Returns:
Return type:	`NXOpen.Point`

New in version NX9.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature OP2Right(op2Right)

Parameters:	op2Right (`NXOpen.Point`) –

New in version NX9.0.0.

License requirements: nx_general_packaging (“NX General Packaging”)

OP2RightFlag¶

HeadImpactOPillarDetailBuilder.OP2RightFlag¶

Returns or sets the right OP2 alternative point flag.

-------------------------------------

Getter Method

Signature OP2RightFlag()

Returns:
Return type:	bool

New in version NX9.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature OP2RightFlag(op2RightFlag)

Parameters:	op2RightFlag (bool) –

New in version NX9.0.0.

License requirements: nx_general_packaging (“NX General Packaging”)

PT6Left¶

HeadImpactOPillarDetailBuilder.PT6Left¶

Returns or sets the left PT6 additional geometry.

-------------------------------------

Getter Method

Signature PT6Left()

Returns:
Return type:	`NXOpen.Point`

New in version NX9.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature PT6Left(pt6Left)

Parameters:	pt6Left (`NXOpen.Point`) –

New in version NX9.0.0.

License requirements: nx_general_packaging (“NX General Packaging”)

PT6LeftFlag¶

HeadImpactOPillarDetailBuilder.PT6LeftFlag¶

Returns or sets the left PT6 additional geometry flag.

-------------------------------------

Getter Method

Signature PT6LeftFlag()

Returns:
Return type:	bool

New in version NX9.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature PT6LeftFlag(pt6LeftFlag)

Parameters:	pt6LeftFlag (bool) –

New in version NX9.0.0.

License requirements: nx_general_packaging (“NX General Packaging”)

PT6Right¶

HeadImpactOPillarDetailBuilder.PT6Right¶

Returns or sets the right PT6 additional geometry.

-------------------------------------

Getter Method

Signature PT6Right()

Returns:
Return type:	`NXOpen.Point`

New in version NX9.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature PT6Right(pt6Right)

Parameters:	pt6Right (`NXOpen.Point`) –

New in version NX9.0.0.

License requirements: nx_general_packaging (“NX General Packaging”)

PT6RightFlag¶

HeadImpactOPillarDetailBuilder.PT6RightFlag¶

Returns or sets the right PT6 additional geometry flag.

-------------------------------------

Getter Method

Signature PT6RightFlag()

Returns:
Return type:	bool

New in version NX9.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature PT6RightFlag(pt6RightFlag)

Parameters:	pt6RightFlag (bool) –

New in version NX9.0.0.

License requirements: nx_general_packaging (“NX General Packaging”)

ReqHorizontalLeftExact¶

HeadImpactOPillarDetailBuilder.ReqHorizontalLeftExact¶

Returns the left horizontal required approach angle.

-------------------------------------

Getter Method

Signature ReqHorizontalLeftExact()

Returns:
Return type:	`NXOpen.Expression`

New in version NX9.0.0.

License requirements: None.

ReqHorizontalRightExact¶

HeadImpactOPillarDetailBuilder.ReqHorizontalRightExact¶

Returns the right horizontal required approach angle.

-------------------------------------

Getter Method

Signature ReqHorizontalRightExact()

Returns:
Return type:	`NXOpen.Expression`

New in version NX9.0.0.

License requirements: None.

ReqVerticalMax¶

HeadImpactOPillarDetailBuilder.ReqVerticalMax¶

Returns the vertical maximum required approach angle.

-------------------------------------

Getter Method

Signature ReqVerticalMax()

Returns:
Return type:	`NXOpen.Expression`

New in version NX9.0.0.

License requirements: None.

ReqVerticalMin¶

HeadImpactOPillarDetailBuilder.ReqVerticalMin¶

Returns the vertical minimum required approach angle.

-------------------------------------

Getter Method

Signature ReqVerticalMin()

Returns:
Return type:	`NXOpen.Expression`

New in version NX9.0.0.

License requirements: None.

Method Detail¶

Validate¶

HeadImpactOPillarDetailBuilder.Validate¶

Validate whether the inputs to the component are sufficient for commit to be called.

If the component is not in a state to commit then an exception is thrown. For example, if the component requires you to set some property, this method will throw an exception if you haven’t set it. This method throws a not-yet-implemented NXException for some components.

Signature Validate()

Returns:	Was self validation successful
Return type:	bool

New in version NX3.0.1.

License requirements: None.