DmRotaryFloorFinishBuilder Class¶
-
class
NXOpen.CAM.
DmRotaryFloorFinishBuilder
¶ Bases:
NXOpen.TaggedObject
represent rotary floor finish builder
New in version NX9.0.0.
Properties¶
Property | Description |
---|---|
CutDirectionType | Returns or sets the function for cut direction type |
CutPatternBuilder | Returns the cut pattern builder |
DirectionAxisType | Returns or sets the direction axis type |
DmSurfCutArea | Returns or sets the cut area |
DmSurfCutStep | Returns or sets the cut step |
DmSurfCutStepFirstCut | Returns or sets the first cut of cut step |
DmSurfCutStepSecondCut | Returns or sets the second cut of cut step |
DmSurfCutStepThirdCut | Returns or sets the third cut of cut step |
DmSurfGouge | Returns or sets the gouge action |
PartAxisBuilder | Returns the part axis builder |
StepIntolBuilder | Returns the builder of cut step intol |
StepOuttolBuilder | Returns the builder of cut step outol |
Tag | Returns the Tag for this object. |
TiltAngle | Returns or sets the tilt angle |
Methods¶
Method | Description |
---|---|
FlipMaterial | Flip material side |
GetCutDirection | Get cut direction. |
GetSurfacePercentageEndFirst | Get percentage end first @return the value of end first |
GetSurfacePercentageEndLast | Get percentage end last @return the value of end last |
GetSurfacePercentageEndStep | Get percentage end step @return the value of end step |
GetSurfacePercentageStartFirst | Get percentage start first @return the value of start first |
GetSurfacePercentageStartLast | Get percentage start last @return the value of start last |
GetSurfacePercentageStartStep | Get percentage start step @return the value of start step |
SetCutDirection | Set cut direction. |
SetSurfacePercentageEndFirst | Set percentage end first |
SetSurfacePercentageEndLast | Set percentage end last |
SetSurfacePercentageEndStep | Set percentage end step |
SetSurfacePercentageStartFirst | Set percentage start first |
SetSurfacePercentageStartLast | Set percentage start last |
SetSurfacePercentageStartStep | Set percentage start step |
Enumerations¶
DmRotaryFloorFinishBuilderCutDirType Enumeration | the types for cut direction |
DmRotaryFloorFinishBuilderCutDirection Enumeration | the types for start cut direction |
DmRotaryFloorFinishBuilderDirectionType Enumeration | the types for direction |
DmRotaryFloorFinishBuilderDmSurfCutAreaType Enumeration | the types for cut area |
DmRotaryFloorFinishBuilderDmSurfCutStepTypes Enumeration | the types for Cut Step |
DmRotaryFloorFinishBuilderGougeActionTypes Enumeration | the gouge action types for Rotary Floor Finish method/Gouge Check in scop |
DmRotaryFloorFinishBuilderMatSideType Enumeration | the types for flip material |
Property Detail¶
CutDirectionType¶
-
DmRotaryFloorFinishBuilder.
CutDirectionType
¶ Returns or sets the function for cut direction type
-------------------------------------
Getter Method
Signature
CutDirectionType()
Returns: the value of direction type Return type: NXOpen.CAM.DmRotaryFloorFinishBuilderCutDirType
New in version NX9.0.0.
License requirements: None.
-------------------------------------
Setter Method
Signature
CutDirectionType(cutDirectionType)
Parameters: cutDirectionType ( NXOpen.CAM.DmRotaryFloorFinishBuilderCutDirType
) – the value of direction typeNew in version NX9.0.0.
License requirements: cam_base (“CAM BASE”)
CutPatternBuilder¶
-
DmRotaryFloorFinishBuilder.
CutPatternBuilder
¶ Returns the cut pattern builder
-------------------------------------
Getter Method
Signature
CutPatternBuilder()
Returns: Return type: NXOpen.CAM.CutPatternBuilder
New in version NX9.0.0.
License requirements: None.
DirectionAxisType¶
-
DmRotaryFloorFinishBuilder.
DirectionAxisType
¶ Returns or sets the direction axis type
-------------------------------------
Getter Method
Signature
DirectionAxisType()
Returns: the value of direction type Return type: NXOpen.CAM.DmRotaryFloorFinishBuilderDirectionType
New in version NX9.0.0.
License requirements: None.
-------------------------------------
Setter Method
Signature
DirectionAxisType(directionType)
Parameters: directionType ( NXOpen.CAM.DmRotaryFloorFinishBuilderDirectionType
) – the value of direction typeNew in version NX9.0.0.
License requirements: cam_base (“CAM BASE”)
DmSurfCutArea¶
-
DmRotaryFloorFinishBuilder.
DmSurfCutArea
¶ Returns or sets the cut area
-------------------------------------
Getter Method
Signature
DmSurfCutArea()
Returns: the value of Stepover Return type: NXOpen.CAM.DmRotaryFloorFinishBuilderDmSurfCutAreaType
New in version NX9.0.0.
License requirements: None.
-------------------------------------
Setter Method
Signature
DmSurfCutArea(dmSurfCutArea)
Parameters: dmSurfCutArea ( NXOpen.CAM.DmRotaryFloorFinishBuilderDmSurfCutAreaType
) – the value of StepoverNew in version NX9.0.0.
License requirements: cam_base (“CAM BASE”)
DmSurfCutStep¶
-
DmRotaryFloorFinishBuilder.
DmSurfCutStep
¶ Returns or sets the cut step
-------------------------------------
Getter Method
Signature
DmSurfCutStep()
Returns: the value of Cut Step Return type: NXOpen.CAM.DmRotaryFloorFinishBuilderDmSurfCutStepTypes
New in version NX9.0.0.
License requirements: None.
-------------------------------------
Setter Method
Signature
DmSurfCutStep(dmSurfCutStep)
Parameters: dmSurfCutStep ( NXOpen.CAM.DmRotaryFloorFinishBuilderDmSurfCutStepTypes
) – the value of Cut StepNew in version NX9.0.0.
License requirements: None.
DmSurfCutStepFirstCut¶
-
DmRotaryFloorFinishBuilder.
DmSurfCutStepFirstCut
¶ Returns or sets the first cut of cut step
-------------------------------------
Getter Method
Signature
DmSurfCutStepFirstCut()
Returns: the first cut value Return type: int New in version NX9.0.0.
License requirements: None.
-------------------------------------
Setter Method
Signature
DmSurfCutStepFirstCut(dmSurfCutStepFirstCut)
Parameters: dmSurfCutStepFirstCut (int) – the first cut value New in version NX9.0.0.
License requirements: None.
DmSurfCutStepSecondCut¶
-
DmRotaryFloorFinishBuilder.
DmSurfCutStepSecondCut
¶ Returns or sets the second cut of cut step
-------------------------------------
Getter Method
Signature
DmSurfCutStepSecondCut()
Returns: the second cut value Return type: int New in version NX9.0.0.
License requirements: None.
-------------------------------------
Setter Method
Signature
DmSurfCutStepSecondCut(dmSurfCutStepSecondCut)
Parameters: dmSurfCutStepSecondCut (int) – the second cut value New in version NX9.0.0.
License requirements: None.
DmSurfCutStepThirdCut¶
-
DmRotaryFloorFinishBuilder.
DmSurfCutStepThirdCut
¶ Returns or sets the third cut of cut step
-------------------------------------
Getter Method
Signature
DmSurfCutStepThirdCut()
Returns: the third cut value Return type: int New in version NX9.0.0.
License requirements: None.
-------------------------------------
Setter Method
Signature
DmSurfCutStepThirdCut(dmSurfCutStepThirdCut)
Parameters: dmSurfCutStepThirdCut (int) – the third cut value New in version NX9.0.0.
License requirements: None.
DmSurfGouge¶
-
DmRotaryFloorFinishBuilder.
DmSurfGouge
¶ Returns or sets the gouge action
-------------------------------------
Getter Method
Signature
DmSurfGouge()
Returns: the value of Gouge Check Return type: NXOpen.CAM.DmRotaryFloorFinishBuilderGougeActionTypes
New in version NX9.0.0.
License requirements: None.
-------------------------------------
Setter Method
Signature
DmSurfGouge(dmSurfGouge)
Parameters: dmSurfGouge ( NXOpen.CAM.DmRotaryFloorFinishBuilderGougeActionTypes
) – the value of Gouge CheckNew in version NX9.0.0.
License requirements: None.
PartAxisBuilder¶
-
DmRotaryFloorFinishBuilder.
PartAxisBuilder
¶ Returns the part axis builder
-------------------------------------
Getter Method
Signature
PartAxisBuilder()
Returns: Return type: NXOpen.CAM.PartAxisBuilder
New in version NX9.0.0.
License requirements: None.
StepIntolBuilder¶
-
DmRotaryFloorFinishBuilder.
StepIntolBuilder
¶ Returns the builder of cut step intol
-------------------------------------
Getter Method
Signature
StepIntolBuilder()
Returns: The Step Intol builder Return type: NXOpen.CAM.InheritableDoubleBuilder
New in version NX9.0.0.
License requirements: None.
StepOuttolBuilder¶
-
DmRotaryFloorFinishBuilder.
StepOuttolBuilder
¶ Returns the builder of cut step outol
-------------------------------------
Getter Method
Signature
StepOuttolBuilder()
Returns: The Step Outol builder Return type: NXOpen.CAM.InheritableDoubleBuilder
New in version NX9.0.0.
License requirements: None.
TiltAngle¶
-
DmRotaryFloorFinishBuilder.
TiltAngle
¶ Returns or sets the tilt angle
-------------------------------------
Getter Method
Signature
TiltAngle()
Returns: the tilt angle value Return type: float New in version NX9.0.0.
License requirements: None.
-------------------------------------
Setter Method
Signature
TiltAngle(tiltAngle)
Parameters: tiltAngle (float) – the tilt angle value New in version NX9.0.0.
License requirements: cam_base (“CAM BASE”)
Method Detail¶
FlipMaterial¶
-
DmRotaryFloorFinishBuilder.
FlipMaterial
¶ Flip material side
Signature
FlipMaterial()
New in version NX9.0.0.
License requirements: cam_base (“CAM BASE”)
GetCutDirection¶
-
DmRotaryFloorFinishBuilder.
GetCutDirection
¶ Get cut direction.
Signature
GetCutDirection()
Returns: the value of cut diretion Return type: NXOpen.CAM.DmRotaryFloorFinishBuilderCutDirection
New in version NX9.0.0.
License requirements: None.
GetSurfacePercentageEndFirst¶
-
DmRotaryFloorFinishBuilder.
GetSurfacePercentageEndFirst
¶ Get percentage end first
Signature
GetSurfacePercentageEndFirst()
Returns: the value of end first Return type: float New in version NX9.0.0.
License requirements: None.
GetSurfacePercentageEndLast¶
-
DmRotaryFloorFinishBuilder.
GetSurfacePercentageEndLast
¶ Get percentage end last
Signature
GetSurfacePercentageEndLast()
Returns: the value of end last Return type: float New in version NX9.0.0.
License requirements: None.
GetSurfacePercentageEndStep¶
-
DmRotaryFloorFinishBuilder.
GetSurfacePercentageEndStep
¶ Get percentage end step
Signature
GetSurfacePercentageEndStep()
Returns: the value of end step Return type: float New in version NX9.0.0.
License requirements: None.
GetSurfacePercentageStartFirst¶
-
DmRotaryFloorFinishBuilder.
GetSurfacePercentageStartFirst
¶ Get percentage start first
Signature
GetSurfacePercentageStartFirst()
Returns: the value of start first Return type: float New in version NX9.0.0.
License requirements: None.
GetSurfacePercentageStartLast¶
-
DmRotaryFloorFinishBuilder.
GetSurfacePercentageStartLast
¶ Get percentage start last
Signature
GetSurfacePercentageStartLast()
Returns: the value of start last Return type: float New in version NX9.0.0.
License requirements: None.
GetSurfacePercentageStartStep¶
-
DmRotaryFloorFinishBuilder.
GetSurfacePercentageStartStep
¶ Get percentage start step
Signature
GetSurfacePercentageStartStep()
Returns: the value of start step Return type: float New in version NX9.0.0.
License requirements: None.
SetCutDirection¶
-
DmRotaryFloorFinishBuilder.
SetCutDirection
¶ Set cut direction.
Signature
SetCutDirection(cutDirection)
Parameters: cutDirection ( NXOpen.CAM.DmRotaryFloorFinishBuilderCutDirection
) – the value of cut directionNew in version NX9.0.0.
License requirements: cam_base (“CAM BASE”)
SetSurfacePercentageEndFirst¶
-
DmRotaryFloorFinishBuilder.
SetSurfacePercentageEndFirst
¶ Set percentage end first
Signature
SetSurfacePercentageEndFirst(dValue)
Parameters: dValue (float) – the value of end first New in version NX9.0.0.
License requirements: cam_base (“CAM BASE”)
SetSurfacePercentageEndLast¶
-
DmRotaryFloorFinishBuilder.
SetSurfacePercentageEndLast
¶ Set percentage end last
Signature
SetSurfacePercentageEndLast(dValue)
Parameters: dValue (float) – the value of end last New in version NX9.0.0.
License requirements: cam_base (“CAM BASE”)
SetSurfacePercentageEndStep¶
-
DmRotaryFloorFinishBuilder.
SetSurfacePercentageEndStep
¶ Set percentage end step
Signature
SetSurfacePercentageEndStep(dValue)
Parameters: dValue (float) – the value of end step New in version NX9.0.0.
License requirements: cam_base (“CAM BASE”)
SetSurfacePercentageStartFirst¶
-
DmRotaryFloorFinishBuilder.
SetSurfacePercentageStartFirst
¶ Set percentage start first
Signature
SetSurfacePercentageStartFirst(dValue)
Parameters: dValue (float) – the value of start first New in version NX9.0.0.
License requirements: cam_base (“CAM BASE”)