Package | Description |
---|---|
nxopen |
Provides classes and interfaces for the NX Open Common API.
|
nxopen.annotations |
Provides classes and interfaces relating to Dimensions, Notes, Symbols, PMI, and other Annotations.
|
nxopen.assemblies |
Provides classes and interfaces for Assemblies.
|
nxopen.assemblies.productinterface |
Provides classes and interfaces for Assembly Product Interfaces.
|
nxopen.blockstyler |
Provides classes and interfaces for the Block Styler.
|
nxopen.bodydes |
Provides classes and interfaces for Body Design.
|
nxopen.cae |
Provides classes and interfaces relating to Advanced Simulation and Design Simulation.
|
nxopen.cae.ftk |
Provides classes and interfaces relating to Advanced Simulation and Design Simulation.
|
nxopen.cae.modelcheck |
Provides classes and interfaces for Model Check.
|
nxopen.cae.optimization |
Provides classes and interfaces relating to Optimization.
|
nxopen.cae.responsesimulation |
Provides classes and interfaces for Response Simulation.
|
nxopen.cae.xyplot |
Provides classes and interfaces for XY Graphing.
|
nxopen.cam |
Provides classes and interfaces for Manufacturing.
|
nxopen.cam.fbm |
Provides classes and interfaces for Manufacturing.
|
nxopen.die |
Provides classes and interfaces relating to Die Engineering and Die Design.
|
nxopen.display |
Provides classes and interfaces for display.
|
nxopen.drafting |
Provides classes and interfaces for the Drafting.
|
nxopen.drawings |
Provides classes and interfaces for Drafting Drawings.
|
nxopen.facet |
Provides classes and interfaces for Faceted Representations.
|
nxopen.features |
Provides classes and interfaces for features.
|
nxopen.features.sheetmetal |
Provides classes and interfaces for Sheet Metal Features.
|
nxopen.features.shipdesign |
Provides classes and interfaces for Ship Design.
|
nxopen.features.subdivision |
Provides classes and interfaces for Manufacturing.
|
nxopen.features.vehicledesign |
Provides classes and interfaces for the Vehicle Design.
|
nxopen.fields |
Provides classes and interfaces for Fields.
|
nxopen.formboard |
Provides interfaces and classes to the Routing Electrical Formboard functionality.
|
nxopen.gateway |
Provides classes and interfaces for Gateway.
|
nxopen.geometricanalysis |
Provides classes and interfaces for Geometric Analysis.
|
nxopen.geometricanalysis.sectionanalysis |
Provides classes and interfaces for Section Analysis.
|
nxopen.geometricutilities |
Provides classes and interfaces for Geometric Utilities.
|
nxopen.issue |
Provides classes and interfaces for the Issue Management.
|
nxopen.layer |
Provides classes and interfaces for layer.
|
nxopen.layout2d |
Provides classes and interfaces for Manufacturing.
|
nxopen.markup | |
nxopen.mechatronics |
Provides classes and interfaces for Mechatronics.
|
nxopen.menubar |
Provides classes and interfaces for the Menu Bar.
|
nxopen.modldirect |
Provides classes and interfaces for Direct Modeling.
|
nxopen.motion |
Provides classes and interfaces for Motion Simulation.
|
nxopen.optimization |
Provides classes and interfaces for Optimization.
|
nxopen.options |
Provides classes and interfaces for options.
|
nxopen.partfamily |
Provides classes and interfaces for Manufacturing.
|
nxopen.pdm |
Provides classes and interfaces for PDM.
|
nxopen.physmat |
Provides classes and interfaces for Physical Material.
|
nxopen.positioning |
Provides classes and interfaces for Assembly Positioning and Constraints.
|
nxopen.preferences |
Provides classes and interfaces for preferences.
|
nxopen.routing |
Provides classes and interfaces for Routing.
|
nxopen.routing.electrical |
Provides classes and interfaces for Routing Electrical.
|
nxopen.shapesearch |
Provides classes and interfaces for Shape Search.
|
nxopen.sheetmetal |
Provides classes and interfaces for Sheet Metal.
|
nxopen.sim |
Provides classes and interfaces for Machine Tool Builder and CAM-Simulation.
|
nxopen.tooling |
Provides classes and interfaces for Tooling.
|
nxopen.uf |
Provides classes and interfaces to the UF API.
|
nxopen.uistyler |
PProvides classes and interfaces for User Interface (UI) Styler.
|
nxopen.userdefinedobjects |
Provides classes and interfaces for User Defined Objects (UDOs).
|
nxopen.userdefinedtemplate |
Provides classes and interfaces for Manufacturing.
|
nxopen.validate |
Provides classes and interfaces for Validation Utilities.
|
nxopen.visualreporting |
Provides classes and interfaces for Visual Reporting.
|
nxopen.weld |
Provides classes and interfaces for Weld.
|
Class and Description |
---|
ApparentChainingRule
Represents a
SelectionIntentRule that collects curves which appear connected or tangent connected in a particular drafting view. |
ApparentChainingRule.Data
This class holds the data returned from
ApparentChainingRule.getData() |
ApparentChainingRuleSelection
Selection Intent filter method to use with apparent chaining.
|
ApparentChainingRuleType
Selection Intent method to use with apparent chaining.
|
Arc
Represents an arc curve.
|
ArcCollection
Represents a collection of arcs.
|
ASCImporter
Represents a
ASCImporter . |
ASCImporter.Units
The Part Units selection Enum
|
AssembliesUtils
Contains various assembly utility methods
To obtain an instance of this class, refer to Session Created in NX6.0.0 |
AttributeManager
Provides methods for querying and updating attributes.
|
AttributePropertiesBaseBuilder
Represents an
AttributePropertiesBaseBuilder to be used for creating attributes. |
AttributePropertiesBaseBuilder.BooleanValueOptions
The value choices for an attribute of type Boolean
|
AttributePropertiesBaseBuilder.DataTypeOptions
Specifies the data type of the attribute, this cannot be changed once the attribute
has been created
|
AttributePropertiesBaseBuilder.ObjectOptions
Deprecated.
Deprecated in NX8.5.0. Use
AttributePropertiesBaseBuilder.setAttributeObjects(nxopen.NXObject[]) instead.
|
AttributePropertiesBuilder
Represents an
AttributePropertiesBuilder . |
AttributePropertiesBuilder.OperationType
Indicates the operation currently being performed.
|
AttributeTemplatesBuilder
Represents an
AttributeTemplatesBuilder to be used when creating attribute
templates. |
AttributeTemplatesBuilder.AccessKey
Specifies the available access keys that determine which objects will have access to this attribute template.
|
AttributeTemplatesBuilder.ConstraintOptions
Specifies the constraint data associated with the template.
|
AttributeTemplatesBuilder.DefaultBooleanOptions
Specifies the default value for a template of type Boolean.
|
AttributeTemplatesBuilder.TemplatesOptions
Specifies the templates option when setting or displaying templates.
|
AutomaticTraceline
Represents an automatic traceline.
|
AutomaticTraceline.ModeOption
Controls the mode used when evaluating an automatic traceline
|
AutomaticTraceline.SegmentConstraintsData
This class holds the data returned from
AutomaticTraceline.getSegmentConstraints() |
AxisCollection
Represents a collection of
nxopen.Axis . |
AxisOrientation
Specifies axis orientation .
|
BasePart
Base class for an NX part.
|
BasePart.BookmarkOption
Controls the information written to a bookmark file.
|
BasePart.CloseAfterSave
Used to specify whether a part should be closed after it is saved.
|
BasePart.CloseModified
Indicates how part close should handle component parts when they are modified
|
BasePart.CloseWholeTree
Used to specify whether or not to close a part's components during a close operation.
|
BasePart.CollaborativeContentType
Represents the collaborative content type corresponding to this part
|
BasePart.HistoryEventInformation
Contains part history event information
|
BasePart.IncompleteStatus
Incomplete part return data
|
BasePart.PartPreview
Specifies the preview mode of the part file.
|
BasePart.PreviewImageData
This class holds the data returned from
BasePart.getPreviewImage() |
BasePart.ReopenData
This class holds the data returned from
BasePart.reopen(nxopen.BasePart.CloseWholeTree, nxopen.BasePart.CloseModified, nxopen.PartCloseResponses) |
BasePart.SaveComponents
Used to specify whether a part's components should be saved (if modified)
when the part is saved.
|
BasePart.TransientStatus
Transient part return data
|
BasePart.Units
The units of the part file.
|
BaseSession
A base class for NXOpen session classes
|
BasicEffectivityBuilder
Represent an interface class for basic effectivity block to assign or edit discrete effectivity unit values.
|
Body
Represents a Body
.
|
Body.FacetedBodyData
This class holds the data returned from
Body.getFacetedBody() |
BodyCollection
Represents a collection of bodies in a part
To obtain an instance of this class, refer to Part Created in NX3.0.0 |
BodyDumbRule
Represents a
SelectionIntentRule that collects bodies without any intent i.e. as if collected with Single Body rule. |
BodyFeatureRule
Represents a
SelectionIntentRule that collects all bodies created or modified by a feature. |
BodyGroupRule
Represents a
SelectionIntentRule that collects all bodies of a group. |
Builder
A Builder is an object that is used to create and edit other objects.
|
CaeObjectType.CaeSubType
Used to specify the sub type of selected objects e.g face of an element, edge of an element ..etc
|
CartesianCoordinateSystem
Represents a cartesian coordinate system
To create a new instance of this class, use CoordinateSystemCollection.createCoordinateSystem(nxopen.Point3d, nxopen.Matrix3x3, boolean) Created in NX4.0.0 |
Catiav4Creator
Represents a
Catiav4Creator to be used when exporting the CATIA V4 Data
This class is created using DexManager . |
Catiav4Creator.SolidBodyOutputOption
Options for outputing solid bodies to CATIA V4
|
Catiav4Importer
Represents a
Catiav4Importer to be used when importing the CATIA V4 Data
This class is created using DexManager . |
Catiav5Creator
Represents a
Catiav5Creator to be used when exporting the CATIA V5 Data
This class is created using DexManager . |
Catiav5Creator.ExportFromOption
Export from options
|
Catiav5Importer
Represents a
Catiav5Importer to be used when importing the CATIA V5 Data
This class is created using DexManager . |
CDF
Represents a
CDF , which is a representation of an NX color palette. |
CGMBuilder
Represents a
CGMBuilder to be used when exporting the Current Display
or drawing sheets to a CGM. |
CGMBuilder.ActionOption
Specifies the action option to be used when running Teamcenter
|
CGMBuilder.Color
Specifies the color option to use when creating the CGM
|
CGMBuilder.ImageResolutionOption
Specifies the image resolution when exporting a raster image
|
CGMBuilder.MultipleOption
Specifies how to export multiple drawing sheets in Native mode
|
CGMBuilder.OutputTextOption
Specifies the text option, as either text or polylines
|
CGMBuilder.RelationOption
Specifies the relation to use when exporting a CGM to Teamcenter
|
CGMBuilder.SizeOption
Specifies the size option of the CGM.
|
CGMBuilder.UnitsOption
Specifies which units are associated to the dimensions
|
CGMBuilder.Vdc
Specifies the VDC coordinates to use when creating the CGM
|
CGMBuilder.Width
Specifies the primary selection of which type of width assignment to use.
|
ClipboardOperationsManager
Used to create importer objects.
|
CollaborativeContentManager
Represents the manager for the various collaborative design contents and this class is usable only when NX is running in managed mode.
|
CollaborativeDesign
A collaborative design is created in Teamcenter.
|
CollaborativeDesignCollection
A collection of collaborative designs.
|
ColorDefinition
Represents a
ColorDefinition , which is a representation of one color
on an NX color palette. |
ColorDefinitionRgb
Specifies rgb values for color
|
ColorManager
Contains functionality pertaining to colors
To obtain an instance of this class, refer to BasePart Created in NX5.0.0 |
ColorWidth
Represents a
ColorWidth used by WidthDefinition to
define a custom width for each color. |
Conic
Represents a conic curve.
|
Conic.OrientationData
This class holds the data returned from
Conic.getOrientation() |
ConvertToFromReferenceBuilder
Represents a
ConvertToFromReferenceBuilder
To create a new instance of this class, use SketchCollection.createConvertToFromReferenceBuilder() Created in NX5.0.0 |
ConvertToFromReferenceBuilder.OutputType
Represents the output type.
|
CoordinateSystem
Represents a coordinate system
This is an abstract class . |
CoordinateSystem.DirectionsData
This class holds the data returned from
CoordinateSystem.getDirections() |
CoordinateSystemCollection
Represents a collection of
CoordinateSystem . |
Curve
Represents a curve.
|
CurveChainRule
Represents a
SelectionIntentRule that collects end-to-end connected curves from the seed curve. |
CurveChainRule.Data
This class holds the data returned from
CurveChainRule.getData() |
CurveCollection
Represents a collection of
Curve . |
CurveDumbRule
Represents a
SelectionIntentRule that collects curves without any intent i.e. as if collected with Single Curve rule. |
CurveFeatureChainRule
Represents a
SelectionIntentRule that collects end-to-end connected curves from the feature of the seed. |
CurveFeatureChainRule.Data
This class holds the data returned from
CurveFeatureChainRule.getData() |
CurveFeatureRule
Represents a
SelectionIntentRule that collects all curves created by a feature. |
CurveFeatureTangentRule
Represents a
SelectionIntentRule that collects tangent connected curves from the feature of the seed. |
CurveFeatureTangentRule.Data
This class holds the data returned from
CurveFeatureTangentRule.getData() |
CurveGroupRule
Represents a
SelectionIntentRule that collects all curves of a group. |
CurveParameterType
Specifies curve parameter type as arc length or percent arc length
|
CurveTangentRule
Represents a
SelectionIntentRule that collects tangent connected curves from the seed curve. |
CurveTangentRule.Data
This class holds the data returned from
CurveTangentRule.getData() |
CustomPopupMenu
Represents Custom Popup Menu Item class .
|
CustomPopupMenuHandler
Represents Custom Popup Menu Handler class .
|
CustomPopupMenuHandler.AddCustomPopupMenuCallback
This callback will be invoked by NX application when a RMB click is performed on
NX Tc Navigator application.
|
CustomPopupMenuHandler.CustomPopupMenuInvokedCallback
This callback will be invoked by NX when user clicks on a custom menu item.
|
CustomPopupMenuItem
Represents Custom Popup Menu Item class .
|
CustomWidth
Represents a
CustomWidth used by WidthDefinition to
define the three custom widths associated with each WidthDefinition. |
CutView
Represents a Cut View
Cut Views may only be created via a Master Cut Builder. |
CutViewCollection
Represents a collection of
CutView objects. |
CutViewCollection.IsCutBodyOfViewData
This class holds the data returned from
CutViewCollection.isCutBodyOfView(nxopen.Body, nxopen.CutView) |
CutViewCollection.IsUncutBodyOfViewData
This class holds the data returned from
CutViewCollection.isUncutBodyOfView(nxopen.Body, nxopen.CutView) |
CylindricalCoordinateSystem
Represents a cylindrical coordinate system
To create a new instance of this class, use CoordinateSystemCollection.createCylindricalCoordinateSystem(nxopen.Point3d, nxopen.Vector3d, nxopen.Vector3d) Created in NX4.0.0 |
DateBuilder
The DateBuilder class allows a date and/or time to be input or output via the DateItem builder.
|
DateItemBuilder
This class stores a date and time.
|
DateItemBuilder.DayOfMonth
Days of the month
|
DateItemBuilder.MonthOfYear
Months of the year.
|
DateItemBuilderList
Represents a list of objects.
|
DatumCollection
Represents a collection of datum geometry.
|
DatumConstraint.CurveOption
Specifies the distance on the curve as absolute distance or relative distance as percentage
|
DatumConstraint.Solution
Specifies the alternate solution for datum axis using point on curve method
|
DatumConstraint.Type
Specifies different constraint types for selected geometries
|
DatumPlane
Represents a datum plane
This object can not be created by KF it's the display objet of the datum plane . |
DatumPlane.CornerPointsData
This class holds the data returned from
DatumPlane.getCornerPoints() |
DexBuilder
This is an abstract class that provides the basic functionality common to all dex builders.
|
DexManager
The DexManager class provides methods to create Dex Builder objects.
|
DirectionCollection
Represents a collection of
nxopen.Direction . |
DisplayableObject
Base class for all objects that are displayable.
|
DisplayableObject.ObjectFont
specifies the object font for objects such as lines .
|
DisplayableObject.ObjectWidth
specifies object width for objects such as lines and text .
|
DisplayManager
Manages the display and changes to it
To obtain an instance of this class, refer to Session Created in NX3.0.0 |
DisplayManager.FacetCacheMemoryLevelType
Facet cache memory level.
|
DisplayManager.J3dColor
3d interface color definition
|
DisplayManager.J3dData
3d interface structure
|
DisplayManager.J3dGeometryData
This class holds the data returned from
DisplayManager.getJ3dGeometry(nxopen.DisplayableObject, double, boolean) |
DisplayManager.J3dMaterial
3d interface material definition
|
DisplayManager.LayerSetting
Represents the layer settings when the objects to show are in invisible layers
|
DisplayManager.ShowHideScope
Controls the scope for the show hide operation.
|
DisplayManager.ShowHideType
Controls the type of object to show or hide.
|
DisplayModification
Represents changes to the display characteristics of an object .
|
DisplayModification.NewGridData
This class holds the data returned from
DisplayModification.getNewGrid() |
DraftingManager
Represents an object that manages drafting objects and member views.
|
DraftPointDataCollection
This class contains the factory methods for creating a DraftPointData object.
|
DrawingCompareManager
Represents an object that manages drawing compare.
|
DrawingUtils
Contains various drawing utility methods
To obtain an instance of this class, refer to Session Created in NX8.5.3 |
DrawingUtils.DrawingAutomationWizardHandler
User defined method that is called whenever Booklet Wizard is committed.
|
DxfdwgCreator
Represents a
DxfdwgCreator to be used when exporting the DXF/DWG Data
This class is created using DexManager . |
DxfdwgCreator.AutoCADRevisionOptions
AutoCad Revision option
|
DxfdwgCreator.ExportAsOption
Exprot As option
|
DxfdwgCreator.ExportDataOption
Exprot Data option
|
DxfdwgCreator.ExportFacesAsOptions
Export Faces As option
|
DxfdwgCreator.ExportFromOption
Exprot From option
|
DxfdwgCreator.ExportSplinesAsOptions
Export Faces As option
|
DxfdwgCreator.OutputFileTypeOption
Output File Type option
|
DxfdwgCreator.OutputToOption
Output To Option
|
DxfdwgCreator.WidthfactorMethodOptions
AutoCad widthfactor calculation options
|
DxfdwgImporter
Represents a
DxfdwgImporter to be used when importing the DXF/DWG Data
This class is created using DexManager . |
DxfdwgImporter.AspectRatioOptions
NX Aspect ratio calculation options
|
DxfdwgImporter.ConvLayoutsAs
Convert latouts option
|
DxfdwgImporter.ImportBlocksAs
Import Blocks as option option
|
DxfdwgImporter.ImportCurvesAs
Import curves as option
|
DxfdwgImporter.ImportDimensionsAs
Import Dimensions as option option
|
DxfdwgImporter.ImportPolylinesAs
Import Polylines as option
|
DxfdwgImporter.ImportToEnum
Import To option
|
DxfdwgImporter.ProcessingOrderAs
Processing Oder of non numeric layers
|
DxfdwgImporter.SendLayoutsAs
Send Layouts data to option
|
DxfdwgImporter.SendModelDataAs
Send Model data to option
|
DxfdwgImporter.UnitsEnum
Import To option
|
Edge |
Edge.EdgeType
Solid edge type.
|
Edge.VerticesData
This class holds the data returned from
Edge.getVertices() |
EdgeBodyRule
Represents a
SelectionIntentRule that collects all the edges of a body. |
EdgeBoundaryRule
Represents a
SelectionIntentRule that collects all the edges of a face. |
EdgeChainRule
Represents a
SelectionIntentRule that collects end-to-end connected edges from the body of the seed edge. |
EdgeChainRule.Data
This class holds the data returned from
EdgeChainRule.getData() |
EdgeDumbRule
Represents a
SelectionIntentRule that collects edges without any intent i.e. as if collected with Single Curve rule. |
EdgeFaceRule
Represents a
SelectionIntentRule that collects all edges of a face. |
EdgeFeatureRule
Represents a
SelectionIntentRule that collects all edges created or modified by a feature. |
EdgeIntersectRule
Represents a
SelectionIntentRule that collects all intersection edges between a set of faces. |
EdgeIntersectRule.Data
This class holds the data returned from
EdgeIntersectRule.getData() |
EdgeMultipleSeedTangentRule
Represents a
SelectionIntentRule that collects tangent connected edges from the body of the seed edge. |
EdgeMultipleSeedTangentRule.Data
This class holds the data returned from
EdgeMultipleSeedTangentRule.getData() |
EdgeSheetBoundaryRule
Represents a
SelectionIntentRule that collects boundary edges of a sheet body. |
EdgeTangentRule
Represents a
SelectionIntentRule that collects tangent connected edges from the body of the seed edge. |
EdgeTangentRule.Data
This class holds the data returned from
EdgeTangentRule.getData() |
EdgeVertexRule
Represents a
SelectionIntentRule that collects the vertex edge and and its adjacent edges. |
EdgeVertexRule.Data
This class holds the data returned from
EdgeVertexRule.getData() |
EdgeVertexTangentRule
Represents a
SelectionIntentRule that collects the vertex edge and the edges adjacent and tangent to it. |
EdgeVertexTangentRule.Data
This class holds the data returned from
EdgeVertexTangentRule.getData() |
EffectivityConditionBuilder
Represent a utility class to assign or edit discrete and range effectivity unit values in the
context of a
CollaborativeDesign . |
EffectivityConditionBuilder.EffectivityConditionType
Specifies the effectivity type option
|
EffectivityConditionBuilder.ToUnitType
Specifies option for range effectivity value's toUnit.
|
Ellipse
Represents an ellipse curve.
|
EllipseCollection
Represents a collection of ellipses.
|
EndCutBlockBuilder.TaperTypeOption
Taper Type
|
EngineeringFunction
Contains Engineering Function methods
To obtain an instance of this class, refer to Session Created in NX4.0.0 |
Enum
Base class for all NX Open enums.
|
ErrorInfo
Contains information about an error that occurred .
|
ErrorList
Represents a list of errors .
|
Expression
Represents an expression.
|
Expression.UnitsOption
Indicates the units to use when getting an expression's value.
|
ExpressionCollection
Represents a collection of expressions.
|
ExpressionCollection.ExportMode
Indicates the mode for exporting expressions.
|
ExpressionCollection.ImportFromFileData
This class holds the data returned from
ExpressionCollection.importFromFile(java.lang.String, nxopen.ExpressionCollection.ImportMode) |
ExpressionCollection.ImportMode
Indicates the mode for importing expressions.
|
ExpressionCollection.InterpartReferencesWithDisplayNamesData
This class holds the data returned from
ExpressionCollection.getInterpartReferencesWithDisplayNames() |
ExpressionCollection.SortType
Indicates the mode for sorting expressions.
|
ExpressionCollectorSet
An object that binds an expression with an entity section in the context of a list.
|
ExpressionSectionSet
An object that binds an expression with an entity section in the context of a list.
|
ExtrudeLimitDataLimitType
This enum represents the type of limit
|
ExtrudeOffsetDataOffsetType
This enum represents the type of offset
|
ExtrudeTaperDataTaperType
This enum represents the type of taper
|
Face
Represents a face .
|
Face.FaceType
Solid face type.
|
FaceAdjacentRule
Represents a
SelectionIntentRule that collects the faces adjacent to the seed face of a body. |
FaceAllBlendRule
Represents a
SelectionIntentRule that collects all blend faces. |
FaceAllBlendRule.DefiningData
This class holds the data returned from
FaceAllBlendRule.getDefiningData() |
FaceAndAdjacentFacesRule
Represents a
SelectionIntentRule that collects both the seed face and all its adjacent faces. |
FaceBodyRule
Represents a
SelectionIntentRule that collects all the faces of a body. |
FaceBossPocketFacesRule
Represents a
SelectionIntentRule that collects all faces of a boss or pocket. |
FaceBossPocketFacesRule.DefiningData
This class holds the data returned from
FaceBossPocketFacesRule.getDefiningData() |
FaceConnectedBlendRule
Represents a
SelectionIntentRule that collects all connected blend faces. |
FaceConnectedBlendRule.DefiningData
This class holds the data returned from
FaceConnectedBlendRule.getDefiningData() |
FaceDumbRule
Represents a
SelectionIntentRule that collects faces without any intent i.e. as if collected with Single Face rule. |
FaceFeatureRule
Represents a
SelectionIntentRule that collects all faces created or modified by a feature. |
FaceMergedRibFacesRule
Represents a
SelectionIntentRule that collects all merged rib faces. |
FaceMergedRibFacesRule.Data
This class holds the data returned from
FaceMergedRibFacesRule.getData() |
FaceMergedRibFacesRule.DefiningData
This class holds the data returned from
FaceMergedRibFacesRule.getDefiningData() |
FaceMergedRibFacesRule.SeedAndPointData
This class holds the data returned from
FaceMergedRibFacesRule.getSeedAndPointData() |
FaceRegionBoundaryRule
Represents a
SelectionIntentRule that collects a region of faces that are tangent connected. |
FaceRegionBoundaryRule.Data
This class holds the data returned from
FaceRegionBoundaryRule.getData() |
FaceRegionRule
Represents a
SelectionIntentRule that collects a region of faces. |
FaceRibFacesRule
Represents a
SelectionIntentRule that collects all rib faces. |
FaceRibFacesRule.DefiningData
This class holds the data returned from
FaceRibFacesRule.getDefiningData() |
FaceSlotFacesRule
Represents a
SelectionIntentRule that collects all faces of a pocket. |
FaceSlotFacesRule.DefiningData
This class holds the data returned from
FaceSlotFacesRule.getDefiningData() |
FaceTangentRule
Represents a
SelectionIntentRule that collects tangent connected faces from the body of the seed face. |
FaceTangentRule.Data
This class holds the data returned from
FaceTangentRule.getData() |
FeatureGeneralPropertiesBuilder
Represents a
FeatureGeneralPropertiesBuilder to be used for modifying
the names of features and general objects. |
FeatureIntersectionEdgesRule
Represents a
SelectionIntentRule that collects the intersection edges of boolean like features. |
FeaturePointsRule
Represents a
SelectionIntentRule that collects all points created by a feature. |
FeatureProcessBuilderStatus.ResultStatus
Result status enumeration to indicate the result status of feature process creation
|
FileNew
Represents a
FileNew
This class is not directly created. |
FileNewApplication
Deprecated.
Deprecated in NX9.0.0. Use
FileNew.getApplicationNames() that returns all application names.
|
FileNewTemplateType
Enumeration used for templates to determine the type of the template.
|
FollowFilletRule
Represents a
SelectionIntentRule that collects curves/edges which are connected or tangent connected and follow onto and off an untrimmed fillet. |
FollowFilletRule.Data
This class holds the data returned from
FollowFilletRule.getData() |
FollowFilletRuleType
Selection Intent method to use with follow fillet rule.
|
FontCollection
Represents a collection of typographical fonts (for example, Arial, OldEnglish)
To obtain an instance of this class, refer to BasePart Created in NX3.0.0 |
FontCollection.Type
Specifies the type of font
|
FourPointSurfaceBuilder
Represents a four point sheet body builder
To create a new instance of this class, use BodyCollection.createFourPointSurfaceBuilder() Created in NX6.0.0 |
GenericMeasure
Represents a single valued measurement .
|
GenericMeasure.Type
The types for a measurement
|
HumanData.AdvancedScalingType
This enum represents the types of the advanced scaling variable names
|
HumanData.DatabaseType
This enum represents the database used for human creation
|
HumanData.EditDisplayBodyParts
This enum represents the body parts of edit human display
|
HumanData.GenderType
This enum represents the gender of human
|
HumanData.HandFootType
This enum represents the types of human hand foot
|
HumanData.HandGoalType
This enum represents the type to define hand goal position
|
HumanData.InverseKinematicsBalanceType
This enum represents the balance type of active reach
|
HumanData.InverseKinematicsBodyParts
This enum represents the body parts of dynamic drag
|
HumanData.InverseKinematicsHeadEyeType
This enum represents the head and eye type of active reach
|
HumanData.InverseKinematicsInitJoint
This enum represents the motion initiation joint of hand dynamic drag
|
HumanData.InverseKinematicsType
This enum represents the types of inverse kinematics
|
HumanData.JointType
This enum represents the types of the joint names
|
HumanData.ReferencePointType
This enum represents the location of the reference point
|
HumanData.SegmentScalingType
This enum represents the types of the segment scaling variable names
|
HumanData.SideType
This enum represents the types of human side
|
HumanData.StatureType
This enum represents the stature data type of human
|
HumanData.StatureUnitType
This enum represents the unit for stature
|
HumanData.WeightType
This enum represents the weight data type of human
|
HumanData.WeightUnitType
This enum represents the unit for weight
|
HumanData.XformData
This class holds the data returned from
HumanData.getXform() |
HumanHandShapeData.HandOpt
This enum represents the hand shape data type of human
|
HumanPosturePredictionBuilder.ComputeHandCsysData
This class holds the data returned from
HumanPosturePredictionBuilder.computeHandCsys() |
HumanPosturePredictionBuilder.CushionFirmnessType
Represents the cushion firmness type
|
HumanPosturePredictionBuilder.HandDataSaeData
This class holds the data returned from
HumanPosturePredictionBuilder.getHandDataSae(nxopen.HumanData.SideType) |
HumanPosturePredictionBuilder.HandFootCsysData
This class holds the data returned from
HumanPosturePredictionBuilder.getHandFootCsys(nxopen.HumanData.HandFootType, nxopen.HumanData.SideType) |
HumanPosturePredictionBuilder.OccupantType
Represents the occupant type.
|
HumanPosturePredictionBuilder.PredictionMethodType
Represents the predition method type.
|
HumanPosturePredictionBuilder.SeatType
Represents the seat type
|
HumanPosturePredictionBuilder.SgrpCoordinatesData
This class holds the data returned from
HumanPosturePredictionBuilder.getSgrpCoordinates() |
HumanPosturePredictionBuilder.SteeringWheelPedalType
This enum represents the steering wheel or pedal type, if there is no steering wheel or pedal, use csys as steering
wheel and pedal type
|
HumanPosturePredictionBuilder.TransmissionType
Represents the transmission type
|
HumanPosturePredictionBuilder.VehicleType
Represents the vehicle type.
|
HumanReachZone.Data
This class holds the data returned from
HumanReachZone.getData() |
HumanReachZone.MethodType
This enum represents the methods for computing the reach zone
|
Hyperbola
Represents a hyperbola curve.
|
HyperbolaCollection
Represents a collection of hyperbolas.
|
IBaseCurve
Represents something containing a two dimensional curve .
|
IBasePlane
Represents a Plane or Datum Plane .
|
IBody
Represents something containing a body .
|
ICurve
Represents something containing a two dimensional modeling curve .
|
IFitTo |
IgesCreator
Represents a
IgesCreator to be used when exporting the IGES Data
This class is created using DexManager . |
IgesCreator.CrossHatchMapEnum
Cross Hatch Map Option
|
IgesCreator.CsysrefEnum
Cysref Option
|
IgesCreator.ExportFromOption
Export From Option
|
IgesCreator.MapRevolvedFacesOption
Map Option
|
IgesImporter
Represents a
IgesImporter to be used when importing the IGES Data
This class is created using DexManager . |
IgesImporter.CopiousDataEnum
Copious Data Option
|
IgesImporter.ImportToEnum
Import To Option
|
ILocation
Represents something that can be supplied to an location selection .
|
Importer
Base class for importing data into the work part.
|
ImportManager
Used to create importer objects.
|
InferredConstraintsBuilder
Represents a
InferredConstraintsBuilder
To create a new instance of this class, use SketchCollection.createInferredConstraintsBuilder() Created in NX5.0.0 |
InferSnapType.SnapType
Specify the snap point type
|
InfiniteLine
Represents a infinite line curve.
|
InfiniteLineCollection
Represents a collection of infinite lines.
|
Information
Represents a class that provides methods for displaying information about part history,
interpart parents and children, features, points, and other NX Objects.
|
Information.DisplayFeatureType
Describes type of information displayed into listing window device.
|
InterpartExpressionsBuilder
This class creates interpart expressions from the source part to the current work part via the naming rule defined.
|
InterpartExpressionsBuilder.ExpressionsData
This class holds the data returned from
InterpartExpressionsBuilder.getExpressions() |
InterpartExpressionsBuilder.NamingRules
This defines the naming rule used for the name of the expression created in
the current work part.
|
INXObject
Represents an interface from which most NXOpen classes inherit .
|
IOrientation
Represents something that can be supplied to an orientation selection .
|
IParameterizedSurface
Represents something containing a face .
|
IPlane
Represents an
Plane class. |
IProfile
Represents something that can be supplied to a profile .
|
ISketchHelpedConstraint
Represents a sketch constraint that has a help point or help parameter.
|
ISketchHelpedConstraint.HelpData
This class holds the data returned from
ISketchHelpedConstraint.getHelpData() |
ISurface
Represents something containing a two dimensional surface .
|
ITableEditorDataProvider
Interface for providing basic data for a Table Editor block.
|
JtCreator
Represents a
JtCreator to be used when exporting the JT Data
This class is created using PvtransManager . |
JtCreator.ChordalValue
Chordal Option
|
JtCreator.FileStructure
JT File Structue
|
JtCreator.FileWrite
JT File Write
|
JtCreator.PmiOption
Include PMI options
|
JtCreator.RefsetOption
refset Options
|
JtCreator.TessellationOption
Tessellation Option
|
Layout
Represents a layout.
|
LayoutCollection
Represents a collection of layouts.
|
LayoutCollection.CreateSplitScreenLayoutAndNamedViewsData
This class holds the data returned from
LayoutCollection.createSplitScreenLayoutAndNamedViews(java.lang.String, java.lang.String) |
LayoutDefinition
Represents the definition of a layout.
|
LayoutDefinition.ArrangementType
Indicates the arrangement type of a layout.
|
LicenseManager
Provides utility methods for managing licenses.
|
Light
Represents a light source.
|
Light.LightTypeData
This class holds the data returned from
Light.getLightType() |
Light.SceneType
The predefined scene lights used in Basic Lights.
|
LightCollection
Represents a collection of
Light s. |
LightType
The type of a light.
|
Line
Represents a line curve.
|
LineCollection
Represents a collection of lines.
|
LineFontBuilder
Represent a
LineFontBuilder
This is a sub-builder class and cannot be directly instantiated Created in NX9.0.0 |
LineFontBuilder.LineFontType
line font types
|
LineWidthOption
the line width options.
|
LinkedMirrorPartAttributeEditData
JA interface for LinkedMirrorPartAttributeEditData object
This cannot be created . |
LinkedMirrorPartAttributeEditEvent
JA interface for LinkedMirrorPartAttributeEditEvent object
This cannot be created . |
LinkedMirrorPartBuilder
builder class of LinkedMirrorPartBuilder
To create a new instance of this class, use PartCollection.createLinkedMirrorPartBuilder(nxopen.Part) Default values. |
LinkedMirrorPartBuilder.MirrorCsysOption
type of mirror of CSYS
The first two axes are mirrored, and the third one is derived
from the two mirrored axes using the right hand convention
|
LinkedMirrorPartBuilder.MirrorPartTypeOption
type of mirror part
|
LinkedMirrorPartEntityMapData
JA interface for LinkedMirrorPartEntityMapData oject
This cannot be created . |
LinkedMirrorPartEntityMapEvent
JA interface for LinkedMirrorPartEntityMapEvent object
This cannot be created . |
LinkedPartManager
Represents the customization interface during linked mirror part creation and update.
|
LinkedPartManager.AttributeEditHandler
User defined attribute edit method that is called whenever a linked mirror part is created or updated from source
|
LinkedPartManager.MapEntityHandler
User defined map entity method that is called whenever a linked mirror part is created or updated from source
|
ListCreator
Represents a
ListCreator to be used when exporting the JT Data
This class is created using PvtransManager . |
ListCreator.ResolutionType
resolution Type
|
ListCreator.TessellationOption
Tessellation Option
|
ListCreatorList
Represents a list of objects.
|
ListingWindow
Represents a ListingWindow.
|
ListingWindow.DeviceType
Describes the type of listing window
|
LoadOptions
Contains accessor methods for all the part load options.
|
LoadOptions.BookmarkComponents
The options to specify what components to load and visualize when loading bookmarks.
|
LoadOptions.BookmarkComponentsToLoadData
This class holds the data returned from
LoadOptions.getBookmarkComponentsToLoad() |
LoadOptions.BookmarkRefsets
the options that specify if reference set data from the bookmark should be restored
and load should be optimized by loading topology from the selected reference sets only.
|
LoadOptions.InterpartData
This class holds the data returned from
LoadOptions.getInterpartData() |
LoadOptions.LoadComponents
Options for specifying what component parts to load during part open .
|
LoadOptions.LoadMethod
Options for specifying how to load component parts .
|
LoadOptions.ManagedModeLoadMethod
Options for specifying how to configure assembly structure in managed mode
|
LoadOptions.Parent
Options to allow you to specify how unloaded parents should be loaded
when interpart data loading is turned on .
|
LoadOptions.SearchDirectoriesData
This class holds the data returned from
LoadOptions.getSearchDirectories() |
LoadOptions.UpdateSubsetOnLoad
Options for specifying what type of subset updation to be carried out while loading .
|
LogFile
Represents the system log file
To obtain an instance of this class, refer to Session Created in NX3.0.0 |
MassPropertiesBuilder
Represents a
MassPropertiesBuilder for calculating the weight of
selected objects as well as informing the part that the assemblies weight property
data needs to be updated on save. |
MassPropertiesBuilder.UpdateOptions
Specifies the Update on Save option that will be applied to all selected objects.
|
Material
Represents Material
This is an abstract class . |
MaterialManager
A manager to deal with all material objects
To obtain an instance of this class, refer to BasePart Created in NX5.0.0 |
MaterialUtilities.ConvertStressStrainData |
MaterialUtilities.StressStrainData
The stress strain data type
|
MathUtils
Contains various math utility methods
To obtain an instance of this class, refer to Session Created in NX3.0.0 |
Matrix3x3
Represents a 3 x 3 matrix .
|
Measure
Represents a measurement feature
To create an instance of this use MeasureBodies ,
MeasureDistance ,
MeasureAngle ,
MeasureFaces , and
MeasureLength Created in NX4.0.0 |
MeasureAngle
Represents a single valued Angle measurement
To create or edit an instance of this class, use MeasureAngleBuilder Created in NX4.0.0 |
MeasureAngle.CreateEmbeddedObjectData
This class holds the data returned from
MeasureAngle.createEmbeddedObject() |
MeasureAngleBuilder
Represents a
MeasureAngleBuilder
To create a new instance of this class, use MeasureManager.createMeasureAngleBuilder(nxopen.NXObject) Created in NX5.0.0 |
MeasureAngleBuilder.AngleType
Represents the angle type.
|
MeasureAngleBuilder.ObjectType
Represents the object type.
|
MeasureAngleBuilder.OrientationType
Represents the orientation type
|
MeasureAngleBuilder.ProjectionType
Represents the projection type.
|
MeasureBodies
Represents the measurement specific mass properties for a set of bodies
To create or edit an instance of this class, use MeasureFaceBuilder Created in NX4.0.0 |
MeasureBodies.ActiveValue
Indicates the type of embedded measurement to create
|
MeasureBodies.AnalysisUnit
Indicates the family of units used in mass property information listings
|
MeasureBodies.CreateEmbeddedObjectData
This class holds the data returned from
MeasureBodies.createEmbeddedObject(nxopen.MeasureBodies.ActiveValue) |
MeasureBodyBuilder
Represents a
MeasureBodyBuilder
To create a new instance of this class, use MeasureManager.createMeasureBodyBuilder(nxopen.NXObject) Created in NX5.0.0 |
MeasureBuilder
Represents a
MeasureBuilder
This is an abstract class, and cannot be instantiated. |
MeasureBuilder.AnnotationType
Represents the annotation type.
|
MeasureBuilder.RequirementType
Represents the requirement type.
|
MeasureDistance
Represents a single valued distance measurement
To create or edit an instance of this class, use MeasureDistanceBuilder Created in NX4.0.0 |
MeasureDistance.CreateEmbeddedObjectData
This class holds the data returned from
MeasureDistance.createEmbeddedObject() |
MeasureDistanceBuilder
Represents a
MeasureDistanceBuilder
To create a new instance of this class, use MeasureManager.createMeasureDistanceBuilder(nxopen.NXObject) Created in NX5.0.0 |
MeasureDistanceBuilder.DistanceType
the type of distance measurement
|
MeasureDistanceBuilder.MeasureType
the subtype of distance measurement
|
MeasureFaceBuilder
Represents a
MeasureFaceBuilder
To create a new instance of this class, use MeasureManager.createMeasureFaceBuilder(nxopen.NXObject) Created in NX5.0.0 |
MeasureFaces
Represents the measurement of perimeter and area of a set of faces
To create or edit an instance of this class, use MeasureFaceBuilder Created in NX4.0.0 |
MeasureFaces.ActiveValue
Indicates the type of embedded measurement to create
|
MeasureFaces.CreateEmbeddedObjectData
This class holds the data returned from
MeasureFaces.createEmbeddedObject(nxopen.MeasureFaces.ActiveValue) |
MeasureLength
Represents a single valued length measurement .
|
MeasureLength.CreateEmbeddedObjectData
This class holds the data returned from
MeasureLength.createEmbeddedObject() |
MeasureManager
Provides methods for manipulating the measurement objects in a part
To obtain an instance of this class, refer to BasePart Created in NX4.0.0 |
MeasureManager.EndpointType
Indicates the end point to be used when lines or linear edges
are referenced in an angle between two objects
|
MeasureManager.ExtremeType
the type of extreme measurement
|
MeasureManager.MeasureType
Indicates if a the distance measurement will be minimum or maximum
distance between the two objects
|
MeasureManager.ProjectionType
Indicates the type of a projected distance measurement
|
MeasureManager.RadialMeasureType
Indicates the type of a radial distance measurement
|
Measurement
Provides methods for calculating and displaying the measurement information.
|
Measurement.ArcLengthBetweenPointsData
This class holds the data returned from
Measurement.getArcLengthBetweenPoints(nxopen.Point, nxopen.Point) |
Measurement.DeviationReportType
Describes type of the 'Deviation Checking' report.
|
Measurement.DisplayMinimumDistanceData
This class holds the data returned from
Measurement.displayMinimumDistance(nxopen.DisplayableObject, nxopen.DisplayableObject) |
Measurement.MinimumDistanceData
This class holds the data returned from
Measurement.getMinimumDistance(nxopen.NXObject, nxopen.NXObject) |
Measurement.RoutingPathLengthData
This class holds the data returned from
Measurement.getRoutingPathLength(nxopen.NXObject[]) |
MeasurePoint
Represents a point measurement .
|
MeasurePolarAngle
Represents a single valued polar angle measurement .
|
MeasurePolarAngle.CreateEmbeddedObjectData
This class holds the data returned from
MeasurePolarAngle.createEmbeddedObject() |
MeasurePolarArea
Represents a single valued polar area measurement .
|
MeasurePolarArea.CreateEmbeddedObjectData
This class holds the data returned from
MeasurePolarArea.createEmbeddedObject() |
MeasurePolarRadius
Represents a single valued polar radius measurement .
|
MeasurePolarRadius.CreateEmbeddedObjectData
This class holds the data returned from
MeasurePolarRadius.createEmbeddedObject() |
MeasureRectangularExtreme
Represents a rectangular extreme point measurement .
|
MeshParameterData.FeatureType
Mesh surface feature types.
|
MeshParameterData.Type
Mesh parameters.
|
MeshProfileString.InsertOrder
Profile string insert orders.
|
MeshProfileString.SelectedPoint
Mesh surface profile string point types.
|
MeshProfileString.Type
Mesh surface profile string types.
|
ModelingView
Represents a Modeling View
Modeling Views may only be created by Save As. |
ModelingView.DisplaySectioningData
This class holds the data returned from
ModelingView.getDisplaySectioning() |
ModelingView.OtherSectionAttrT
Deprecated.
Deprecated in NX5.0.0. This funcitonality is replaced by
ModelingView.setActiveDynamicSection(nxopen.display.DynamicSection)
|
ModelingView.SectionCap
Deprecated.
Deprecated in NX5.0.0. This funcitonality is replaced by
ModelingView.setActiveDynamicSection(nxopen.display.DynamicSection)
|
ModelingView.SectionPlane
Deprecated.
Deprecated in NX5.0.0. This funcitonality is replaced by
ModelingView.setActiveDynamicSection(nxopen.display.DynamicSection)
|
ModelingViewCollection
Represents a collection of
ModelingView s. |
ModelingViewHighQualityImage
Represents the properties and methods for generating a High Quality Image
of a Modeling View
To obtain an instance of this class, refer to ModelingView Created in NX4.0.0 |
ModelingViewHighQualityImage.DisplayTechniqueType
Describes the technique to be used when generating the High Quality Image
|
ModelingViewHighQualityImage.FormatType
Describes the output format of the High Quality Image to be generated
|
ModelingViewHighQualityImage.ImageCountsData
This class holds the data returned from
ModelingViewHighQualityImage.getImageCounts() |
ModelingViewHighQualityImage.ShadeMethod
Describes the method to be used to generate a High Quality Image
|
MovieManager
Represents a
MovieManager class. |
MovieSettingsBuilder
This class is the builder for the Movie Settings.
|
MovieSettingsBuilder.CaptureAreaChoices
Indicates the are being recorded in the movie.
|
MovieSettingsBuilder.PlaybackSpeedChoices
Indicates the playback speed of the movie.
|
NXColor
Represents a standard NX color.
|
NXColor.Rgb
RGB values
|
NXException
A base class for exceptions thrown by NXOpen methods
|
NXMatrix
Represents an NX matrix.
|
NXMatrixCollection
Represents a collection of NX Matrixes.
|
NXMessageBox
Displays message box.
|
NXMessageBox.DialogType
Describes type of message box.
|
NXObject
A base class providing low-level services for most NXOpen classes.
|
NXObject.AttributeInformation
Contains attribute information.
|
NXObject.AttributeType
Specifies attribute type.
|
NXObject.ComputationalTime
Holds the computational time value of a time attribute.
|
NXObject.DateAndTimeFormat
Specifies the format of the date and time attribute.
|
NXRemotableObject.RemotingProtocol
Represents parameters used with RMI remoting.
|
NXTo2dCreator
Represents a
NXTo2dCreator to be used when exporting the 2D Data
This class is created using DexManager . |
NXTo2dCreator.ExportDataOption
Export Data Option
|
NXTo2dCreator.ExportFromOption
Export From Option
|
NXTo2dCreator.OutputAsOption
Output As Option
|
NXTo2dCreator.OutputToOption
Output To Option
|
ObjectGeneralPropertiesBuilder
Represents an
ObjectGeneralPropertiesBuilder to be used for modifying
the names and properties of objects. |
ObjectList
Represents a list of objects.
|
ObjectList.DeleteOption
Used to indicate whether to delete the object
when removing it from the list
|
ObjectSelector
Represents a
ObjectSelector to be used when exporting the the selected objects
from NX part.This class is created using DexManager . |
ObjectSelector.Scope
Represents the selection scope
|
ObjectTypeSelector
Represents a
ObjectTypeSelector to be used when filter out the objects
based on the type during import/export. |
Offset
Represents a
Offset . |
Offset.OnFaceOption
Specifies the offset direction in relation to a face.
|
OffsetCollection
Represents a collection of
Offset . |
OuterEdgesOfFacesRule
Represents a
SelectionIntentRule that collects the outer edges of a group of faces. |
Parabola
Represents a parabola curve.
|
ParabolaCollection
Represents a collection of Parabolas
To obtain an instance of this class, refer to BasePart Created in NX3.0.0 |
Part
Represents an NX part of type .prt.
|
Part.FeatureUpdateStatus
Contains feature update status report
|
Part.PartFamilyAttributeData |
Part.PartFamilyAttrType
Deprecated.
Deprecated in NX9.0.0. Use
FamilyAttribute.AttrType instead
|
Part.Relations
The relations of the part file.
|
Part.Units
The units of the part file.
|
Part.UpdateStatusReportData
This class holds the data returned from
Part.getUpdateStatusReport() |
PartCleanup
Provides utilities to to eliminate certain inaccessible
objects from the part file.
|
PartCleanup.CleanupParts
Which parts to clean up
|
PartCleanup.DeleteGroups
Which empty groups to clean up
|
PartCleanup.ResetComponentDisplayAction
Assembly display clean up action
|
PartCloseResponses
Manages a list of part name/response pairs which are
used to determine whether a part should be closed if modified during
part close.
|
PartCollection
Represents the collection of all parts in a session.
|
PartCollection.ImportToolDesignPackageData
This class holds the data returned from
PartCollection.importToolDesignPackage(java.lang.String, java.lang.String) |
PartCollection.MirrorPlaneDataOfMirrorPartData
This class holds the data returned from
PartCollection.getMirrorPlaneDataOfMirrorPart(nxopen.Part) |
PartCollection.OpenBaseData
This class holds the data returned from
PartCollection.openBase(java.lang.String) |
PartCollection.OpenData
This class holds the data returned from
PartCollection.open(java.lang.String) |
PartCollection.PartClosedHandler
User defined method that is called whenever a part is in the process of being closed.
|
PartCollection.PartCreatedHandler
User defined method that is called whenever a new part is created.
|
PartCollection.PartModifiedHandler
User defined method that is called whenever a part is modified
|
PartCollection.PartOpenedHandler
User defined method that is called whenever a part is opened.
|
PartCollection.PartRenamedHandler
User defined method that is called whenever a part is renamed
|
PartCollection.PartSavedAsHandler
User defined method that is called whenever a part is saved as a specified name.
|
PartCollection.PartSavedHandler
User defined method that is called whenever a part is saved.Do not create, open, save
other parts or change display part inside this callback.
|
PartCollection.RefsetOption
Controls the reference set used when setting the work component.
|
PartCollection.SaveAllData
This class holds the data returned from
PartCollection.saveAll() |
PartCollection.SdpsStatus
Indicates the reason why it was not possible to use Design in Context (i.e. to set
the work part to a component of the displayed part.)
|
PartCollection.SetDisplayData
This class holds the data returned from
PartCollection.setDisplay(nxopen.BasePart, boolean, boolean) |
PartCollection.WorkComponentOption
Controls the behavior when setting the work component.
|
PartCollection.WorkPartChangedHandler
User defined method that is called whenever the work part changes
|
PartDelayedUpdateStatus.DelayStatusInfo
Logical structure of part delayed update status
|
PartFamilyManager
Deprecated.
Deprecated in NX9.0.0. Use
TemplateManager instead.
|
PartFamilyMemberData
Deprecated.
Deprecated in NX9.0.0. Use
InstanceDefinition and TemplateManager instead.
|
PartFamilyMemberValues
Deprecated.
Deprecated in NX9.0.0. Use
PartFamily.InstanceDefinition instead.
|
PartImporter
Used to import a part into the work part.
|
PartImporter.DestinationCoordinateSystemSpecificationType
Specifies the destination coordinate system specification.
|
PartImporter.LayerOptionType
Specifies on which layer to import a part.
|
PartLoadStatus
Represents a list of part names with associated status codes.
|
PartSaveOptions
Contains accessor methods for all part save options that follow the part.
|
PartSaveOptions.PatternData
Options for specifying how pattern data should be saved while saving a part .
|
PartSaveStatus
This class represents a list of part names with associated status codes that serve
to communicate why these parts where not able to be saved during part save.
|
PasteSpecialBuilder
Represents a
PasteSpecialBuilder
To create a new instance of this class, use ClipboardOperationsManager.createPasteSpecialBuilder() Default values. |
PasteSpecialBuilder.DestinationOption
This enum represents the paste ppecial destination coordinate system options
|
PasteSpecialBuilder.LayerOption
This enum represents the paste special layer options
|
Persistence
Specifies persistence .
|
PhysicalMaterial
Represents Physical Material .
|
PhysicalMaterial.AssignWarning
Indicates the underlying issues when trying to assign material
|
PhysicalMaterial.Category
The different categories of materials.
|
PhysicalMaterial.ParentlibrarymaterialData
This class holds the data returned from
PhysicalMaterial.getParentlibrarymaterial() |
PhysicalMaterial.Type
The different types of materials.
|
PhysicalMaterialBuilder
Represents a
PhysicalMaterial builder To create a new instance of this class, use PhysicalMaterialCollection.createPhysicalMaterialBuilder(nxopen.PhysicalMaterial.Type) Created in NX6.0.0 |
PhysicalMaterialCollection
Represents the collection of all
PhysicalMaterial objects in this Part
To obtain an instance of this class, refer to MaterialManager Created in NX5.0.0 |
Plane
Represents an
Plane class. |
PlaneCollection
Represents a collection of
Plane . |
PlaneNormalOrientation
Specifies the orientation of a plane's normal .
|
PlaneTypes.AlternateType
Represents the alternate solutions.
|
PlaneTypes.FrenetSubtype
Specify the subtypes for on_curve type of plane, where alternate solution is not
enough to handle the situation after enhancement to this specific plane type.
|
PlaneTypes.MethodType
Specifies different method types of selected geometries
|
PlotBuilder
Represents a
PlotBuilder . |
PlotBuilder.ImageResolutionOption
Specifies the plot image resolution
|
PlotBuilder.JustificationOption
Specifies the justification of the banner
|
PlotBuilder.PlotTypes
Specifies the type of plot
|
PlotBuilder.RotationOption
Specifies the rotation of the banner
|
PlotBuilder.UnitsOption
Specifies which units are associated to the dimensions
|
PlotBuilder.XdisplayOption
Specifies the x-coordinate for the banner location
|
PlotBuilder.YdisplayOption
Specifies the y-coordinate for the banner location
|
PlotColorsWidthsBuilder
Represents a
PlotColorsWidthsBuilder to be used for plotting. |
PlotColorsWidthsBuilder.Color
Specifies the color option to use when plotting.
|
PlotColorsWidthsBuilder.Width
Specifies the primary selection of which type of width assignment to use.
|
PlotManager
The PlotManager class provides methods to create Gateway Builder objects.
|
PlotSourceBuilder
Represents a
PlotSourceBuilder
All sheets provided must be in the displayed part. |
Point
Represents a smart
Point . |
Point3d
Represents three-dimensional cartesian coordinates for a point .
|
Point4d
Represents four-dimensional homogeneous coordinates for a point.
|
PointCollection
Represents a collection of smart
Point . |
PointCollection.AlongCurveOption
Describes whether the input Scalar to the
PointCollection.createPoint(nxopen.Point3d)
method is either an absolute distance or a relative percentage. |
PointCollection.PointOnCurveLocationOption
Describes whether the input Scalar to the
PointCollection.createPoint(nxopen.Point3d)
method is a relative percentage parameter or an absolute arc length or a relative percentage arc length. |
Polyline
Represents a polyline curve.
|
PolylineCollection
Represents a collection of polylines.
|
PositioningDimension.Subtype
Represents the subtype of the positioning dimension
|
PreviewPropertiesBuilder
Represents a
PreviewPropertiesBuilder to be used for creating and storing
previews. |
PreviewPropertiesBuilder.ModelViewCreationOptions
Specifies when the model view preview will be created
|
PreviewPropertiesBuilder.PartCreationOptions
Specifies when the part preview will be created
|
PrintBuilder
Represents a
PrintBuilder . |
PrintBuilder.ImageResolutionOption
Specifies the print image resolution
|
PrintBuilder.OrientationOption
Specifies the orientation of the printed sheet
|
PrintBuilder.OutputOption
Specifies the output option when printing Current Display
|
PrintBuilder.PaperSize
Specifies the paper size of the printed sheet
|
PrintPDFBuilder
Represents a
PrintPDFBuilder to be used when exporting the Current Display
or selected sheets to a PDF document. |
PrintPDFBuilder.ActionOption
Specifies the action option to be used when running Teamcenter
|
PrintPDFBuilder.Color
Specifies the color option to use when creating the PDF document
|
PrintPDFBuilder.ImageResolutionOption
Specifies the image resolution when exporting a raster image
|
PrintPDFBuilder.OutputTextOption
Specifies the output text option, as either text or polylines
|
PrintPDFBuilder.RelationOption
Specifies the relation to use when exporting a PDF to Teamcenter
|
PrintPDFBuilder.SizeOption
Specifies the size option of the PDF document.
|
PrintPDFBuilder.UnitsOption
Specifies which units are associated to the dimensions
|
PrintPDFBuilder.Width
Specifies the primary selection of which type of width assignment to use.
|
ProeImporter
Represents a
ProeImporter to be used when importing the ProE Data
This class is created using DexManager . |
PropertiesManager
The PropertiesManager class provides methods to create Gateway Properties Builder objects.
|
PropertyContainer
Represents a list of properties.
|
PropertyContainer.DoubleMatrixData
This class holds the data returned from
PropertyContainer.getDoubleMatrix(java.lang.String) |
PropertyContainer.IntegerMatrixData
This class holds the data returned from
PropertyContainer.getIntegerMatrix(java.lang.String) |
PropertyContainer.ListMode
Indicates whether the properties in the list are named.
|
PropertyContainer.PropertyType
Represents the property types.
|
PvtransManager
The PvtransManager class provides methods to create Pvtrans Builder objects.
|
ReferenceSet |
RegionBoundaryRule
Represents a
SelectionIntentRule that collects curves as specified by an enclosed region. |
RegionBoundaryRule.Data
This class holds the data returned from
RegionBoundaryRule.getData() |
RegionPoint
Represents a point and body context on a region point.
|
ReplaceExpressionsBuilder
This class creates Replace expressions from the source part to the current work part via the naming rule defined.
|
RibTopFaceEdgesRule
Represents a
SelectionIntentRule that collects the like convexity outer edges of a group of faces. |
RuleManager
Provides methods for manipulating the Knowledge Fusion rules in a part.
|
RuleManager.AdoptableTypes
Used to return adoptable object types.
|
RuleManager.DebugInstance
Used to return debug update information for instances.
|
RuleManager.DebugInstancesData
This class holds the data returned from
RuleManager.getDebugInstances() |
RuleManager.DebugRule
Used to return debug update information for rules.
|
RuleManager.Filter
The filter option for asking for classes.
|
RuleManager.FunctionArgumentsInformation
Used to return information about the arguments for a function.
|
RuleManager.FunctionInformation
Used to return information about a function.
|
RuleManager.InitializationStatusType
Indicates the status from initializing RuleManager.
|
RuleManager.InitializeData
This class holds the data returned from
RuleManager.initialize(nxopen.RuleManager.LicenseType) |
RuleManager.LicenseType
Indicates the license type to be used.
|
RuleManager.ParameterRule
Used to specify parameter values for child rule creation or modification.
|
RuleManager.RuleType
Indicates the data type of a rule.
|
SaveOptions
Contains accessor methods for all part save options that follow the session.
|
Scalar
Represents a scalar.
|
Scalar.DimensionalityType
Specifies the dimensionality of the scalar.
|
ScalarCollection
Represents a collection of
Scalar objects. |
ScCollector
Sc Collector
To create a new instance of this class, use ScCollectorCollection.createCollector() Created in NX4.0.0 |
ScCollectorCollection
This class contains the factory methods for creating a sc collector.
|
ScRuleFactory
This class contains the factory methods for creating selection intent rules
To obtain an instance of this class, refer to Part Created in NX3.0.0 |
Section
Represents a section
Section consists of "chained_entity", a chain or a single entity of edge or curve. |
Section.AllowTypes
Defines entity types allowed.
|
Section.DeselectOption
Defines type of deselect option.
|
Section.Mode
Defines mode with respect to feature create or edit mode.
|
Section.StartAndDirectionData
This class holds the data returned from
Section.getStartAndDirection() |
Section.StartAndDirectionOfLoopData
This class holds the data returned from
Section.getStartAndDirectionOfLoop(int) |
SectionCollection
This class contains the factory methods for creating a section.
|
SectionCollection.LoopOption
Defines how section are created in
SectionCollection.createSectionsUsingCurves(nxopen.NXObject[], nxopen.SectionCollection.LoopOption, double, double, double) |
SectionData
Represents section data .
|
SectionElementData
Represents section element data .
|
SectionElementData.Data
This class holds the data returned from
SectionElementData.getSectionElementData() |
SectionElementData.SectionElementData1
This class holds the data returned from
SectionElementData.getSectionElementData1() |
SectionList
Represents a list of objects.
|
SelectBody.ValueData
This class holds the data returned from
SelectBody.getValue() |
SelectBody.ValueWithCaeSetObjectInfoData
This class holds the data returned from
SelectBody.getValue() |
SelectBody.ValueWithSnapData
This class holds the data returned from
SelectBody.getValue() |
SelectCartesianCoordinateSystem.ValueData
This class holds the data returned from
SelectCartesianCoordinateSystem.getValue() |
SelectCartesianCoordinateSystem.ValueWithCaeSetObjectInfoData
This class holds the data returned from
SelectCartesianCoordinateSystem.getValue() |
SelectCartesianCoordinateSystem.ValueWithSnapData
This class holds the data returned from
SelectCartesianCoordinateSystem.getValue() |
SelectCoordinateSystem.ValueData
This class holds the data returned from
SelectCoordinateSystem.getValue() |
SelectCoordinateSystem.ValueWithCaeSetObjectInfoData
This class holds the data returned from
SelectCoordinateSystem.getValue() |
SelectCoordinateSystem.ValueWithSnapData
This class holds the data returned from
SelectCoordinateSystem.getValue() |
SelectCurve.ValueData
This class holds the data returned from
SelectCurve.getValue() |
SelectCurve.ValueWithCaeSetObjectInfoData
This class holds the data returned from
SelectCurve.getValue() |
SelectCurve.ValueWithSnapData
This class holds the data returned from
SelectCurve.getValue() |
SelectCurveList
Represents a list of objects on a selection list.
|
SelectDatumPlane.ValueData
This class holds the data returned from
SelectDatumPlane.getValue() |
SelectDatumPlane.ValueWithCaeSetObjectInfoData
This class holds the data returned from
SelectDatumPlane.getValue() |
SelectDatumPlane.ValueWithSnapData
This class holds the data returned from
SelectDatumPlane.getValue() |
SelectDisplayableObject
Represents a single object selection.
|
SelectDisplayableObject.ValueData
This class holds the data returned from
SelectDisplayableObject.getValue() |
SelectDisplayableObject.ValueWithCaeSetObjectInfoData
This class holds the data returned from
SelectDisplayableObject.getValue() |
SelectDisplayableObject.ValueWithSnapData
This class holds the data returned from
SelectDisplayableObject.getValue() |
SelectDisplayableObjectList
Represents a list of objects on a selection list.
|
SelectEdge.ValueData
This class holds the data returned from
SelectEdge.getValue() |
SelectEdge.ValueWithCaeSetObjectInfoData
This class holds the data returned from
SelectEdge.getValue() |
SelectEdge.ValueWithSnapData
This class holds the data returned from
SelectEdge.getValue() |
SelectFace.ValueData
This class holds the data returned from
SelectFace.getValue() |
SelectFace.ValueWithCaeSetObjectInfoData
This class holds the data returned from
SelectFace.getValue() |
SelectFace.ValueWithSnapData
This class holds the data returned from
SelectFace.getValue() |
SelectFaceList
Represents a list of objects on a selection list.
|
SelectIBaseCurve.ValueData
This class holds the data returned from
SelectIBaseCurve.getValue() |
SelectIBaseCurve.ValueWithCaeSetObjectInfoData
This class holds the data returned from
SelectIBaseCurve.getValue() |
SelectIBaseCurve.ValueWithSnapData
This class holds the data returned from
SelectIBaseCurve.getValue() |
SelectICurve.ValueData
This class holds the data returned from
SelectICurve.getValue() |
SelectICurve.ValueWithCaeSetObjectInfoData
This class holds the data returned from
SelectICurve.getValue() |
SelectICurve.ValueWithSnapData
This class holds the data returned from
SelectICurve.getValue() |
Selection
Defines an interface object for executing selection operations
To obtain an instance of this class, refer to UI Created in NX3.0.0 |
Selection.AskSelectionCursorPositionData
This class holds the data returned from
Selection.askSelectionCursorPosition(nxopen.SelectionHandle) |
Selection.AskSelectionRectanglePositionData
This class holds the data returned from
Selection.askSelectionRectanglePosition(nxopen.SelectionHandle) |
Selection.DialogResponse
Specify the user response for general dialogs.
|
Selection.FilterCallback
It is an optional callback which the user can provide to perform
application specific filtering when selecting objects.
|
Selection.FilterTaggedObjectCallback
It is an optional callback which the user can provide to perform
application specific filtering when selecting tagged objects.
|
Selection.MaskTriple
Used in selection methods to set the types of objects that are selectable.
|
Selection.Response
Specify the user response for the selection operation.
|
Selection.SelectFeaturesData
This class holds the data returned from
Selection.selectFeatures(java.lang.String, nxopen.Selection.SelectionFeatureType) |
Selection.SelectionAction
Indicates the type of action to perform when an object is selected.
|
Selection.SelectionCallback
It is an optional callback which the user can provide to customize his selection
|
Selection.SelectionDescriptor
For a rectangle deselection, the fields deselection,
multipleSelection, rectangle
bits would be set.
|
Selection.SelectionFeatureType
Specify the type of features to select.
|
Selection.SelectionScope
Indicates the scope for selecting objects.
|
Selection.SelectionType
Indicates the general class of object to filter selection.
|
Selection.SelectObjectData
This class holds the data returned from
Selection.selectObject(java.lang.String, java.lang.String, nxopen.Selection.SelectionScope, boolean, boolean) |
Selection.SelectObjectsData
This class holds the data returned from
Selection.selectObjects(java.lang.String, java.lang.String, nxopen.Selection.SelectionScope, boolean, boolean) |
Selection.SelectScreenPositionData
This class holds the data returned from
Selection.selectScreenPosition(java.lang.String) |
Selection.SelectTaggedObjectData
This class holds the data returned from
Selection.selectTaggedObject(java.lang.String, java.lang.String, nxopen.Selection.SelectionScope, boolean, boolean) |
Selection.SelectTaggedObjectsData
This class holds the data returned from
Selection.selectTaggedObjects(java.lang.String, java.lang.String, nxopen.Selection.SelectionScope, boolean, boolean) |
Selection.TaggedObjectSelectionCallback
It is an optional callback which the user can provide to customize his selection of tagged objects
|
Selection.UistylerSelectionType
Indicates the general class of object to filter selection.
|
SelectionHandle
Represents a SelectionHandle for UI Styler .
|
SelectionIntentRule
Represents a
SelectionIntentRule which essentially provides capabilities to collect
curves, edges, faces and bodies. |
SelectionIntentRule.RuleType
This enum represents the type of selection intent rules as specified by
SelectionIntentRule |
SelectionMethod
Represents the output from a smart selector method
This is an abstract class, and cannot be created. |
SelectIParameterizedSurface.ValueData
This class holds the data returned from
SelectIParameterizedSurface.getValue() |
SelectIParameterizedSurface.ValueWithCaeSetObjectInfoData
This class holds the data returned from
SelectIParameterizedSurface.getValue() |
SelectIParameterizedSurface.ValueWithSnapData
This class holds the data returned from
SelectIParameterizedSurface.getValue() |
SelectISurface
Represents a single object selection.
|
SelectISurface.ValueData
This class holds the data returned from
SelectISurface.getValue() |
SelectISurface.ValueWithCaeSetObjectInfoData
This class holds the data returned from
SelectISurface.getValue() |
SelectISurface.ValueWithSnapData
This class holds the data returned from
SelectISurface.getValue() |
SelectLine.ValueData
This class holds the data returned from
SelectLine.getValue() |
SelectLine.ValueWithCaeSetObjectInfoData
This class holds the data returned from
SelectLine.getValue() |
SelectLine.ValueWithSnapData
This class holds the data returned from
SelectLine.getValue() |
SelectNXObject
Represents a single object selection.
|
SelectNXObject.ValueData
This class holds the data returned from
SelectNXObject.getValue() |
SelectNXObject.ValueWithCaeSetObjectInfoData
This class holds the data returned from
SelectNXObject.getValue() |
SelectNXObject.ValueWithSnapData
This class holds the data returned from
SelectNXObject.getValue() |
SelectNXObjectList
Represents a list of objects on a selection list.
|
SelectObject
Represents a single object selection.
|
SelectObject.ValueData
This class holds the data returned from
SelectObject.getValue() |
SelectObject.ValueWithCaeSetObjectInfoData
This class holds the data returned from
SelectObject.getValue() |
SelectObject.ValueWithSnapData
This class holds the data returned from
SelectObject.getValue() |
SelectObjectList
Represents a list of objects on a selection list.
|
SelectPart.ValueData
This class holds the data returned from
SelectPart.getValue() |
SelectPart.ValueWithCaeSetObjectInfoData
This class holds the data returned from
SelectPart.getValue() |
SelectPart.ValueWithSnapData
This class holds the data returned from
SelectPart.getValue() |
SelectPoint.ValueData
This class holds the data returned from
SelectPoint.getValue() |
SelectPoint.ValueWithCaeSetObjectInfoData
This class holds the data returned from
SelectPoint.getValue() |
SelectPoint.ValueWithSnapData
This class holds the data returned from
SelectPoint.getValue() |
SelectSketch.ValueData
This class holds the data returned from
SelectSketch.getValue() |
SelectSketch.ValueWithCaeSetObjectInfoData
This class holds the data returned from
SelectSketch.getValue() |
SelectSketch.ValueWithSnapData
This class holds the data returned from
SelectSketch.getValue() |
SelectSmartObject.ValueData
This class holds the data returned from
SelectSmartObject.getValue() |
SelectSmartObject.ValueWithCaeSetObjectInfoData
This class holds the data returned from
SelectSmartObject.getValue() |
SelectSmartObject.ValueWithSnapData
This class holds the data returned from
SelectSmartObject.getValue() |
SelectSpline.ValueData
This class holds the data returned from
SelectSpline.getValue() |
SelectSpline.ValueWithCaeSetObjectInfoData
This class holds the data returned from
SelectSpline.getValue() |
SelectSpline.ValueWithSnapData
This class holds the data returned from
SelectSpline.getValue() |
SelectTaggedObject.ValueData
This class holds the data returned from
SelectTaggedObject.getValue() |
SelectTaggedObject.ValueWithCaeSetObjectInfoData
This class holds the data returned from
SelectTaggedObject.getValue() |
SelectTaggedObject.ValueWithSnapData
This class holds the data returned from
SelectTaggedObject.getValue() |
SelectView
Represents a single object selection.
|
SelectView.ValueData
This class holds the data returned from
SelectView.getValue() |
SelectView.ValueWithCaeSetObjectInfoData
This class holds the data returned from
SelectView.getValue() |
SelectView.ValueWithSnapData
This class holds the data returned from
SelectView.getValue() |
Sense
Specifies sense direction .
|
Session.MarkVisibility
Indicates the visibility of an undo mark
|
Session.NamedPropertiesData
This class holds the data returned from
Session.getNamedProperties(nxopen.TaggedObject) |
Session.ProjectAssignmentObjectType
Indicates whether project assignment is for item, item revision or dataset
|
Session.ProjectAssignmentState
Indicates project assignment state
|
Session.TransientPartPolicy
Persistence policies for transient modified parts
|
Session.UndoLastNVisibleMarksData
This class holds the data returned from
Session.undoLastNVisibleMarks(int) |
Session.UndoMarkData
This structure contains data about an undo mark
|
SingleMeasure
Represents a single valued measurement .
|
Sketch
Represents a sketch
Use the SketchCollection class to create a sketch. |
Sketch.AddEllipseOption
Used by
Sketch.addGeometry(nxopen.DisplayableObject, nxopen.Sketch.InferConstraintsOption) to determine whether to treat an
ellipse as an ellipse or generic conic when adding the curve to
a sketch. |
Sketch.AlternateSolutionOption
Indicates whether the alternate solution should be used instead of the regular solution.
|
Sketch.AssocType
Used in
Sketch.DimensionGeometry to indicate what type of
geometry to use |
Sketch.AutoDimensioningRule
Type of Auto Dimensioning rules.
|
Sketch.ConstraintClass
Represents the class of the constraint.
|
Sketch.ConstraintGeometry
Used by the create geometric constraint methods to indicate what geometry
the constraint should be applied to.
|
Sketch.ConstraintGeometryHelp
Used by several constraint creation methods that need a help point or parameter
to indicate how to create the constraint.
|
Sketch.ConstraintGeometryHelpType
Used in ConstraintHelp to indicate what type of help it is
|
Sketch.ConstraintPointType
Used in ConstraintGeometry to indicate what type of point, if any, the geometry is
|
Sketch.ConstraintType
Represents the type of constraint
|
Sketch.ConstraintVisibility
Deprecated.
Deprecated in NX8.5.0. Please use
SessionSketch.displayConstraintSymbols() and SessionSketch.setDisplayConstraintSymbols(boolean)
|
Sketch.CopyObjectData
This structure represents a map between the original object to be copied
and the corresponding copied object.
|
Sketch.CopyObjectsWithDimensionOutputData
This class holds the data returned from
Sketch.copyObjectsWithDimensionOutput(nxopen.NXObject[]) |
Sketch.CreateDimensionOption
Used in fillet to indicate whether a radius dimension should be created
by the fillet
|
Sketch.CreateInferConstraintSetting
Indicates if the infer constraints will be created or not
|
Sketch.DeleteThirdCurveOption
Indicates whether the 3rd curve should be deleted when doing a 3 curve fillet
|
Sketch.DimensionGeometry
Used in the dimension creation methods to indicate what geometry to
create the dimension on.
|
Sketch.DimensionOption
Used by
Sketch.createDimension(nxopen.Sketch.ConstraintType, nxopen.Sketch.DimensionGeometry, nxopen.Sketch.DimensionGeometry, nxopen.Point3d, nxopen.Expression) , Sketch.createRadialDimension(nxopen.Sketch.DimensionGeometry, nxopen.Point3d, nxopen.Expression)
Sketch.createDiameterDimension(nxopen.Sketch.DimensionGeometry, nxopen.Point3d, nxopen.Expression) and Sketch.createPerimeterDimension(nxopen.Curve[], nxopen.Point3d, nxopen.Expression)
to determine whether to create driving or reference dimension |
Sketch.FilletData |
Sketch.InferConstraintsOption
Used when adding a point or curve to a sketch.
|
Sketch.PlaneOption
Specifies the plane type used for a Sketch
|
Sketch.ReferenceDirectionData
This class holds the data returned from
Sketch.getReferenceDirection() |
Sketch.Status
Represents the status of the sketch
|
Sketch.StatusData
This class holds the data returned from
Sketch.getStatus() |
Sketch.TrimInputOption
Indicates whether the input curves should be trimmed when doing a fillet
|
Sketch.UpdateLevel
Used to indicate how much the updating should occur
|
Sketch.ViewReorient
Used to indicate whether to reorient the view when the sketch is activated
|
SketchAlongPathBuilder
Use the
SketchAlongPathBuilder to create or reattach a Sketch along a path. |
SketchAlongPathBuilder.PlaneOrientationType
Indicates the orientation of the plane
|
SketchAlongPathBuilder.SketchOrientationType
Indicates the sketch orientation method.
|
SketchAngularDimensionBuilder
Represents a
SketchAngularDimensionBuilder To create a new instance of this class, use SketchCollection.createAngularDimensionBuilder(nxopen.annotations.AngularDimension) Created in NX9.0.0 |
SketchAssociativeTrim
Represents a sketch associative trim constraint
Use SketchCollection.createSketchAssociativeTrimBuilder(nxopen.SketchAssociativeTrim) to create an instance of this class. |
SketchAssociativeTrimBuilder
Represents a
SketchAssociativeTrimBuilder
To create a new instance of this class, use SketchCollection.createSketchAssociativeTrimBuilder(nxopen.SketchAssociativeTrim) Default values. |
SketchAssociativeTrimBuilder.TrimOption
Represents the keep discard options for selected region
|
SketchAutoConstrainBuilder
Represents a
SketchAutoConstrainBuilder
To create a new instance of this class, use SketchCollection.createAutoConstrainBuilder() Default values. |
SketchAutoDimensionBuilder
Represents a
SketchAutoDimensionBuilder
To create a new instance of this class, use SketchCollection.createAutoDimensionBuilder() Default values. |
SketchAutoDimensionBuilder.DimType
dimension type to be created
|
SketchChamferBuilder
Represents a Chamfer builder
To create a new instance of this class, use SketchCollection.createSketchChamferBuilder() Default values. |
SketchChamferBuilder.ChamferOptions
Dialog options for Chamfer Creation
|
SketchCollection
Represents a collection of sketches
To obtain an instance of this class, refer to Part Created in NX3.0.0 |
SketchConicBuilder
Represents a
SketchConicBuilder builder
To create a new instance of this class, use SketchCollection.createSketchConicBuilder(nxopen.NXObject) Default values. |
SketchConstraint
Represents a constraint in a sketch.
|
SketchConstraintBuilder
Represents a
SketchConstraint builder To create a new instance of this class, use SketchCollection.createConstraintBuilder() Created in NX8.5.0 |
SketchConstraintBuilder.Constraint
the types of the constraint
|
SketchCornerBuilder
Create a corner between two sketch curves.
|
SketchDimensionalConstraint
Represents a dimensional constraint
To create an instance of this class refer to Sketch Created in NX3.0.0 |
SketchDimensionalConstraint.DimensionStateType
Dimension status.
|
SketchDimensionBuilder
Edit the geometry references of an existing sketch dimension.
|
SketchDimensionBuilder.ExpOption
This enum determines the expression behavior when a dimension is attached to new geometry
|
SketchEditDefiningSectionBuilder
Represents a
SketchEditDefiningSectionBuilder builder. |
SketchEllipseBuilder
Represents a
SketchEllipseBuilder builder
To create a new instance of this class, use SketchCollection.createSketchEllipseBuilder(nxopen.NXObject) Default values. |
SketchEvaluator
Represents a sketch-on-path evaluator.
|
SketchEvaluatorCollection
Represents a collection of
SketchEvaluator . |
SketchExpressionModifierBuilder
Represents a Sketch Expression Modifier Builder.
|
SketchExpressionModifierBuilder.EndCuts
End cut
|
SketchG1Constraint.SlopeType
Represents the G1 slope type of the constraint
|
SketchGeometricConstraint |
SketchHelpedGeometricConstraint
Represents a geometric sketch constraint that has a help point or help parameter
To obtain an instance of this class, use Sketch . |
SketchInDraftingBuilder
Use the
SketchInDraftingBuilder to create a Sketch on a DraftingView or nxopen.drawings.DrawingSheet . |
SketchInPlaceBuilder |
SketchIntersectionCurve
Represents a Intersection Curve operation inside sketch
To create an instance of this object use SketchIntersectionCurveBuilder Created in NX5.0.0 |
SketchIntersectionCurveBuilder
Represents a
SketchIntersectionCurve builder To obtain an instance of this class use SketchCollection.createIntersectionCurveBuilder(nxopen.SketchIntersectionCurve) . |
SketchIntersectionPoint
Represents an Intersection Point operation inside sketch
To create an instance of this object use SketchIntersectionPointBuilder Created in NX5.0.0 |
SketchIntersectionPointBuilder
Represents a
SketchIntersectionPoint builder To obtain an instance of this class use SketchCollection.createIntersectionPointBuilder(nxopen.SketchIntersectionPoint) . |
SketchLinearDimensionBuilder
Represents a
SketchLinearDimensionBuilder To create a new instance of this class, use SketchCollection.createLinearDimensionBuilder(nxopen.annotations.Dimension) Created in NX9.0.0 |
SketchMakeSymmetricBuilder
This class is used to add symmetric contraint to objects from a
SketchMakeSymmetricBuilder . |
SketchMirrorBuilder
This class is used to create a set of mirrored curves from a
SketchMirrorBuilder . |
SketchMirrorPatternBuilder
Represents a
SketchMirrorPatternBuilder
To create a new instance of this class, use SketchCollection.createSketchMirrorPatternBuilder(nxopen.SketchPattern) Default values. |
SketchOffset
Represents a sketch offset constraint
Use SketchCollection.createSketchOffsetBuilder(nxopen.SketchOffset) to create an instance of this class. |
SketchOffset.CapType
Represents the cap type of the offset
|
SketchOffsetBuilder
Represents a
SketchOffsetBuilder
To create a new instance of this class, use SketchCollection.createSketchOffsetBuilder(nxopen.SketchOffset) Default values. |
SketchPasteBuilder
Represents a
SketchPasteBuilder To create a new instance of this class, use SketchCollection.createSketchPasteBuilder(nxopen.Sketch[]) Default values. |
SketchPattern
Represents a sketch pattern constraint
Use SketchCollection.createSketchPatternBuilder(nxopen.SketchPattern) to create an instance of this class. |
SketchPattern.InstanceControl
Represents the type of instance control for circular patterns
|
SketchPattern.Type
Represents the pattern type of the constraint
|
SketchPatternBuilder
Represents a
SketchPatternBuilder
To create a new instance of this class, use SketchCollection.createSketchPatternBuilder(nxopen.SketchPattern) Default values. |
SketchPolygon
Represents a polygon constraint in a sketch
To create or edit an instance of this class, use SketchPolygonBuilder Created in NX7.5.0 |
SketchPolygonBuilder
Represents a
SketchPolygon builder To create a new instance of this class, use SketchCollection.createSketchPolygonBuilder(nxopen.SketchPolygon) Default values. |
SketchPolygonBuilder.SizeType
Polygon type
|
SketchProjectBuilder
Represents a
SketchProjectBuilder builder
To create a new instance of this class, use SketchCollection.createProjectBuilder(nxopen.features.Feature) Default values. |
SketchProjectBuilder.OutputCurve
This enum represents the kind of output curves
|
SketchQuickExtendBuilder
Represents a
SketchQuickExtendBuilder
To create a new instance of this class, use SketchCollection.createQuickExtendBuilder() Default values. |
SketchQuickTrimBuilder
Represents a
SketchQuickTrimBuilder
To create a new instance of this class, use SketchCollection.createQuickTrimBuilder() Default values. |
SketchRadialDimensionBuilder
Represents a
SketchRadialDimensionBuilder To create a new instance of this class, use SketchCollection.createRadialDimensionBuilder(nxopen.annotations.Dimension) Created in NX9.0.0 |
SketchRapidDimensionBuilder
Represents a
SketchRapidDimensionBuilder To create a new instance of this class, use SketchCollection.createRapidDimensionBuilder() Created in NX9.0.0 |
SketchTangentConstraint
Represents a tangent constraint
To create an instance of this object use Sketch.createTangentConstraint(nxopen.Sketch.ConstraintGeometry, nxopen.Sketch.ConstraintGeometryHelp, nxopen.Sketch.ConstraintGeometry, nxopen.Sketch.ConstraintGeometryHelp) Created in NX3.0.0 |
SmartObject
Represents a smart object.
|
SmartObject.UpdateOption
Specifies when the smart object updates.
|
SmartObject.VisibilityOption
Specifies the smart object visibility.
|
SphericalCoordinateSystem
Represents a cylindrical coordinate system
To create a new instance of this class, use CoordinateSystemCollection.createSphericalCoordinateSystem(nxopen.Point3d, nxopen.Vector3d, nxopen.Vector3d) Created in NX4.0.0 |
Spline
Represents a spline curve.
|
SplineCollection
Represents a collection of splines.
|
Step203Creator
Represents a
Step203Creator to be used when exporting the STEP203 Data
This class is created using DexManager . |
Step203Creator.EntityNameOption
Entity Name Option
|
Step203Creator.ExportFromOption
Create the builder
|
Step203Creator.ExternalReferenceOption
External Reference Option
|
Step203Importer
Represents a
Step203Importer to be used when importing the STEP203 Data
This class is created using DexManager . |
Step203Importer.ImportToOption
Create the builder
|
Step214Creator
Represents a
Step214Creator to be used when exporting the STEP214 Data
This class is created using DexManager . |
Step214Creator.EntityNameOption
Entitiy Name Option
|
Step214Creator.ExportFromOption
Export From Option
|
Step214Creator.ExternalReferenceOption
External Reference Option
|
Step214Importer
Represents a
Step214Importer to be used when importing the STEP214 Data
This class is created using DexManager . |
Step214Importer.ImportToOption
Create the builder
|
STLImporter
Used to import an STL file into the work part.
|
STLImporter.AngularToleranceType
Specifies the angular tolerance.
|
STLImporter.FileFormatType
Specifies the STL file format.
|
STLImporter.FileUnitsType
Specifies the STL file units.
|
SubdivisionMeshBody
Represents a subdivision mesh.
|
SubdivisionMeshEdge
Represents a subdivision mesh edge.
|
SubdivisionMeshEdge.VerticesData
This class holds the data returned from
SubdivisionMeshEdge.getVertices() |
SubdivisionMeshFace
Represents a subdivision mesh face.
|
SubdivisionMeshVertex
Represents a subdivision mesh vertex.
|
SubdivisionTaskEnvironment
Represents the subdivision task environment associated with a session.
|
SuppressByExpressionBuilder
Represents a
SuppressByExpressionBuilder
To create a new instance of this class, use ExpressionCollection.createSuppressByExpressionBuilder() Default values. |
SuppressByExpressionBuilder.ExpressionAction
Represents the expression action type.
|
SurfaceRebuildData.Type
Surface rebuild types.
|
SurfaceUVDirectionBuilder
Represents an edit surface u/v direction builder that allows reversing or swapping parametric directions.
|
TableEditorDefaultDataProvider
Provides basic data for a Table Editor block.
|
Tag
A tag used to identify an object within NX
|
TaggedObject
An object which has a Tag
|
TaggedObjectCollection
A base class for all NXOpen tagged object collections
|
TaggedObjectCollection.Iterator
An iterator class for tagged object collections
|
TaggedObjectManager
Used for interoperability with Java.UF in order to obtain the TaggedObject
that corresponds to a given Tag.
|
Traceline
Represents a traceline.
|
TracelineCollection
Represents a collection of tracelines
To obtain an instance of this class, refer to Part Created in NX4.0.0 |
TransientObject
A base class for all NXOpen transient objects
|
UI.Status
Indicates the Lock, Unlock status of NX functions.
|
UI.UtilityFunctionVisibilityHandler
User defined method is called whenever an NX utility function state changes.
|
Unit |
UnitCollection
Provides methods for manipulating the units in a part
To obtain an instance of this class, refer to BasePart Created in NX4.0.0 |
Update
Provides methods for update and delete.
|
Update.FailureOption
Specifies the action to take when an object fails to update.
|
Update.Option
Specifies whether a method should perform an update or not.
|
Validation
Represents an NX
Validation object. |
Validation.InputType
Specifies the input type
|
Validation.LookupIntegerData
This class holds the data returned from
Validation.lookupInteger(java.lang.String) |
Validation.LookupNumberData
This class holds the data returned from
Validation.lookupNumber(java.lang.String) |
Validation.LookupTextData
This class holds the data returned from
Validation.lookupText(java.lang.String) |
Validation.LookupTimeData
This class holds the data returned from
Validation.lookupTime(java.lang.String) |
Validation.MapType
Specifies the map types
|
Validation.Result
Specifies result of the validation
|
Validation.UpdateTime
Specifies when to validate
|
ValidationCollection
Represents a collection of
Validation . |
Vector3d
Represents a three-dimensional vector .
|
View
Represents a view.
|
View.Canned
Describes a simplified indexing scheme for accessing canned views
with interfaces that use this enum as a parameter.
|
View.RenderingStyleType
Describes the rendering style for geometry displayed in the view.
|
View.ScaleAdjustment
Describes simple, predefined adjustments that may be applied to a
view's scale while another operation is performed, in conjunction, on the view.
|
View.ScaleFactor
Describes the relative scales to which a view can be set
|
View.ShowOrHideType
Specifies whether a show or hide operation, or both, has just been done
|
ViewCollection
Represents a collection of
View s. |
ViewDependentDisplayManager
Represents all view dependent display operations
To obtain an instance of this class, refer to View Created in NX5.0.0 |
ViewDependentDisplayManager.Font
specifies the font for wireframe edits .
|
ViewDependentDisplayManager.PartialShading
specifies the partial shading options for shading edits .
|
ViewDependentDisplayManager.Translucency
specifies the translucency options for shading edits .
|
ViewDependentDisplayManager.Width
specifies the width for wireframe edits .
|
VRMLImporter
Used to import a VRML file into the work part.
|
VRMLImporter.AngularToleranceType
Specifies the angular tolerance.
|
VRMLImporter.FileUnitsType
Specifies the VRML file units.
|
WCS
Represents the World Coordinate System.
|
WCS.Axis
Specifies the X, Y, or Z axis
|
WidthDefinition
Represents a
WidthDefinition , which is a representation of an NX width
palette. |
Xform
Represents a smart xform
To create a new instance of this class, use XformCollection.createXform(nxopen.Point3d, nxopen.Vector3d, nxopen.Vector3d, nxopen.SmartObject.UpdateOption, double) Created in NX3.0.0 |
XformCollection
Represents a collection of
Xform objects. |
XformCollection.CreateExtractXformData
This class holds the data returned from
XformCollection.createExtractXform(nxopen.NXObject, nxopen.SmartObject.UpdateOption, boolean) |
Class and Description |
---|
AxisOrientation
Specifies axis orientation .
|
Body
Represents a Body
.
|
Builder
A Builder is an object that is used to create and edit other objects.
|
CaeObjectType.CaeSubType
Used to specify the sub type of selected objects e.g face of an element, edge of an element ..etc
|
CoordinateSystem
Represents a coordinate system
This is an abstract class . |
Curve
Represents a curve.
|
DisplayableObject
Base class for all objects that are displayable.
|
DisplayableObject.ObjectFont
specifies the object font for objects such as lines .
|
Enum
Base class for all NX Open enums.
|
Expression
Represents an expression.
|
InferSnapType.SnapType
Specify the snap point type
|
INXObject
Represents an interface from which most NXOpen classes inherit .
|
LineColorFontWidthBuilder
Represent a
LineColorFontWidthBuilder
This is a sub-builder class and cannot be directly instantiated Created in NX9.0.0 |
LineFontBuilder
Represent a
LineFontBuilder
This is a sub-builder class and cannot be directly instantiated Created in NX9.0.0 |
ModelingView
Represents a Modeling View
Modeling Views may only be created by Save As. |
NXColor
Represents a standard NX color.
|
NXException
A base class for exceptions thrown by NXOpen methods
|
NXObject
A base class providing low-level services for most NXOpen classes.
|
NXObjectList
Represents a list of objects.
|
ObjectList.DeleteOption
Used to indicate whether to delete the object
when removing it from the list
|
Point
Represents a smart
Point . |
Point3d
Represents three-dimensional cartesian coordinates for a point .
|
SectionList
Represents a list of objects.
|
SelectDisplayableObject
Represents a single object selection.
|
SelectDisplayableObjectList
Represents a list of objects on a selection list.
|
SelectEdge
Represents a single object selection.
|
SelectionMethod
Represents the output from a smart selector method
This is an abstract class, and cannot be created. |
SelectNXObject
Represents a single object selection.
|
SelectNXObjectList
Represents a list of objects on a selection list.
|
SelectObject
Represents a single object selection.
|
SelectObjectList
Represents a list of objects on a selection list.
|
SelectPoint
Represents a single object selection.
|
SymbolFont
Represents a symbol font
This class cannot be created, but an instance can be obtained from Annotations.AnnotationManager#loadSymbolFontFromSbfFile . |
TaggedObject
An object which has a Tag
|
TaggedObjectCollection
A base class for all NXOpen tagged object collections
|
TaggedObjectList
Represents a list of objects.
|
TransientObject
A base class for all NXOpen transient objects
|
View
Represents a view.
|
Xform
Represents a smart xform
To create a new instance of this class, use XformCollection.createXform(nxopen.Point3d, nxopen.Vector3d, nxopen.Vector3d, nxopen.SmartObject.UpdateOption, double) Created in NX3.0.0 |
Class and Description |
---|
BasePart
Base class for an NX part.
|
BasePart.CloseWholeTree
Used to specify whether or not to close a part's components during a close operation.
|
BasicEffectivityBuilder
Represent an interface class for basic effectivity block to assign or edit discrete effectivity unit values.
|
Builder
A Builder is an object that is used to create and edit other objects.
|
CaeObjectType.CaeSubType
Used to specify the sub type of selected objects e.g face of an element, edge of an element ..etc
|
CollaborativeDesign
A collaborative design is created in Teamcenter.
|
DisplayableObject
Base class for all objects that are displayable.
|
Enum
Base class for all NX Open enums.
|
ErrorList
Represents a list of errors .
|
Expression
Represents an expression.
|
FileNew
Represents a
FileNew
This class is not directly created. |
IAttributeSourceObjectBuilder
Represents an interface to perform various database operations on an array of
NXObject . |
IFitTo |
InferSnapType.SnapType
Specify the snap point type
|
INXObject
Represents an interface from which most NXOpen classes inherit .
|
Matrix3x3
Represents a 3 x 3 matrix .
|
NXColor
Represents a standard NX color.
|
NXException
A base class for exceptions thrown by NXOpen methods
|
NXObject
A base class providing low-level services for most NXOpen classes.
|
NXObject.AttributeInformation
Contains attribute information.
|
NXObject.AttributeType
Specifies attribute type.
|
ObjectList.DeleteOption
Used to indicate whether to delete the object
when removing it from the list
|
Part
Represents an NX part of type .prt.
|
PartCloseStatus
This class represents a list of part names with associated status codes that serve
to communicate why these parts were not able to be closed.
|
PartDelayedUpdateStatus
Represents a list of part names with associated delay status codes.
|
PartLoadStatus
Represents a list of part names with associated status codes.
|
Point3d
Represents three-dimensional cartesian coordinates for a point .
|
SelectDisplayableObjectList
Represents a list of objects on a selection list.
|
SelectionMethod
Represents the output from a smart selector method
This is an abstract class, and cannot be created. |
SelectObject
Represents a single object selection.
|
SelectTaggedObjectList
Represents a list of objects on a selection list.
|
TaggedObject
An object which has a Tag
|
TaggedObjectCollection
A base class for all NXOpen tagged object collections
|
TransientObject
A base class for all NXOpen transient objects
|
Update.Option
Specifies whether a method should perform an update or not.
|
Vector3d
Represents a three-dimensional vector .
|
View
Represents a view.
|
Class and Description |
---|
Builder
A Builder is an object that is used to create and edit other objects.
|
Enum
Base class for all NX Open enums.
|
INXObject
Represents an interface from which most NXOpen classes inherit .
|
NXException
A base class for exceptions thrown by NXOpen methods
|
NXObject
A base class providing low-level services for most NXOpen classes.
|
TaggedObject
An object which has a Tag
|
Class and Description |
---|
Enum
Base class for all NX Open enums.
|
NXException
A base class for exceptions thrown by NXOpen methods
|
Point3d
Represents three-dimensional cartesian coordinates for a point .
|
Selection.MaskTriple
Used in selection methods to set the types of objects that are selectable.
|
Selection.Response
Specify the user response for the selection operation.
|
Selection.SelectionAction
Indicates the type of action to perform when an object is selected.
|
TaggedObject
An object which has a Tag
|
TransientObject
A base class for all NXOpen transient objects
|
Vector3d
Represents a three-dimensional vector .
|
Class and Description |
---|
Body
Represents a Body
.
|
Enum
Base class for all NX Open enums.
|
NXException
A base class for exceptions thrown by NXOpen methods
|
Point
Represents a smart
Point . |
ScCollector
Sc Collector
To create a new instance of this class, use ScCollectorCollection.createCollector() Created in NX4.0.0 |
Section
Represents a section
Section consists of "chained_entity", a chain or a single entity of edge or curve. |
SelectBodyList
Represents a list of objects on a selection list.
|
TaggedObject
An object which has a Tag
|
TaggedObjectCollection
A base class for all NXOpen tagged object collections
|
Class and Description |
---|
Arc
Represents an arc curve.
|
BasePart
Base class for an NX part.
|
Body
Represents a Body
.
|
Builder
A Builder is an object that is used to create and edit other objects.
|
CaeObjectType.CaeSubType
Used to specify the sub type of selected objects e.g face of an element, edge of an element ..etc
|
Conic
Represents a conic curve.
|
CoordinateSystem
Represents a coordinate system
This is an abstract class . |
DataContainer
Represents a list of data.
|
DisplayableObject
Base class for all objects that are displayable.
|
DisplayableObject.ObjectWidth
specifies object width for objects such as lines and text .
|
Enum
Base class for all NX Open enums.
|
Expression
Represents an expression.
|
IBaseCurve
Represents something containing a two dimensional curve .
|
IBody
Represents something containing a body .
|
IFitTo |
ILocation
Represents something that can be supplied to an location selection .
|
InferSnapType.SnapType
Specify the snap point type
|
INXObject
Represents an interface from which most NXOpen classes inherit .
|
IOrientation
Represents something that can be supplied to an orientation selection .
|
IParameterizedSurface
Represents something containing a face .
|
Line
Represents a line curve.
|
MaterialUtilities
Represents Physical
MaterialUtilities class To obtain an instance of this class, refer to CaeSession Created in NX10.0.0 |
Matrix3x3
Represents a 3 x 3 matrix .
|
NXColor
Represents a standard NX color.
|
NXColor.Rgb
RGB values
|
NXException
A base class for exceptions thrown by NXOpen methods
|
NXObject
A base class providing low-level services for most NXOpen classes.
|
ObjectList.DeleteOption
Used to indicate whether to delete the object
when removing it from the list
|
Part
Represents an NX part of type .prt.
|
PhysicalMaterial
Represents Physical Material .
|
Plane
Represents an
Plane class. |
Point
Represents a smart
Point . |
Point2d
Represents two-dimensional cartesian coordinates for a point .
|
Point3d
Represents three-dimensional cartesian coordinates for a point .
|
PropertyContainer
Represents a list of properties.
|
SelectDisplayableObject
Represents a single object selection.
|
SelectDisplayableObjectList
Represents a list of objects on a selection list.
|
SelectIBaseCurveList
Represents a list of objects on a selection list.
|
SelectionMethod
Represents the output from a smart selector method
This is an abstract class, and cannot be created. |
SelectIParameterizedSurface
Represents a single object selection.
|
SelectIParameterizedSurfaceList
Represents a list of objects on a selection list.
|
SelectNXObjectList
Represents a list of objects on a selection list.
|
SelectObject
Represents a single object selection.
|
SelectObjectList
Represents a list of objects on a selection list.
|
SelectPointList
Represents a list of objects on a selection list.
|
SelectTaggedObject
Represents a single object selection.
|
SelectTaggedObjectList
Represents a list of objects on a selection list.
|
SmartObject
Represents a smart object.
|
Spline
Represents a spline curve.
|
TaggedObject
An object which has a Tag
|
TaggedObjectCollection
A base class for all NXOpen tagged object collections
|
TransientObject
A base class for all NXOpen transient objects
|
Unit |
View
Represents a view.
|
Class and Description |
---|
Enum
Base class for all NX Open enums.
|
INXObject
Represents an interface from which most NXOpen classes inherit .
|
NXException
A base class for exceptions thrown by NXOpen methods
|
NXObject
A base class providing low-level services for most NXOpen classes.
|
TaggedObject
An object which has a Tag
|
Unit |
Class and Description |
---|
Builder
A Builder is an object that is used to create and edit other objects.
|
DisplayableObject.ObjectFont
specifies the object font for objects such as lines .
|
DisplayableObject.ObjectWidth
specifies object width for objects such as lines and text .
|
Enum
Base class for all NX Open enums.
|
Expression
Represents an expression.
|
INXObject
Represents an interface from which most NXOpen classes inherit .
|
NXColor
Represents a standard NX color.
|
NXException
A base class for exceptions thrown by NXOpen methods
|
NXObject
A base class providing low-level services for most NXOpen classes.
|
SelectTaggedObjectList
Represents a list of objects on a selection list.
|
TaggedObject
An object which has a Tag
|
TaggedObjectCollection
A base class for all NXOpen tagged object collections
|
TransientObject
A base class for all NXOpen transient objects
|
Unit |
Vector3d
Represents a three-dimensional vector .
|
Class and Description |
---|
Builder
A Builder is an object that is used to create and edit other objects.
|
CoordinateSystem
Represents a coordinate system
This is an abstract class . |
DisplayableObject
Base class for all objects that are displayable.
|
Enum
Base class for all NX Open enums.
|
Expression
Represents an expression.
|
INXObject
Represents an interface from which most NXOpen classes inherit .
|
NXException
A base class for exceptions thrown by NXOpen methods
|
NXObject
A base class providing low-level services for most NXOpen classes.
|
Plane
Represents an
Plane class. |
Point
Represents a smart
Point . |
TaggedObject
An object which has a Tag
|
TaggedObjectCollection
A base class for all NXOpen tagged object collections
|
Unit |
Class and Description |
---|
Builder
A Builder is an object that is used to create and edit other objects.
|
DisplayableObject
Base class for all objects that are displayable.
|
Enum
Base class for all NX Open enums.
|
Expression
Represents an expression.
|
IFitTo |
INXObject
Represents an interface from which most NXOpen classes inherit .
|
NXException
A base class for exceptions thrown by NXOpen methods
|
NXObject
A base class providing low-level services for most NXOpen classes.
|
SelectDisplayableObjectList
Represents a list of objects on a selection list.
|
SelectObject
Represents a single object selection.
|
SmartObject
Represents a smart object.
|
TaggedObject
An object which has a Tag
|
TaggedObjectCollection
A base class for all NXOpen tagged object collections
|
Class and Description |
---|
DisplayableObject.ObjectFont
specifies the object font for objects such as lines .
|
DisplayableObject.ObjectWidth
specifies object width for objects such as lines and text .
|
Enum
Base class for all NX Open enums.
|
INXObject
Represents an interface from which most NXOpen classes inherit .
|
Matrix3x3
Represents a 3 x 3 matrix .
|
NXColor
Represents a standard NX color.
|
NXException
A base class for exceptions thrown by NXOpen methods
|
NXObject
A base class providing low-level services for most NXOpen classes.
|
TaggedObject
An object which has a Tag
|
TransientObject
A base class for all NXOpen transient objects
|
Class and Description |
---|
Body
Represents a Body
.
|
Builder
A Builder is an object that is used to create and edit other objects.
|
CaeObjectType.CaeSubType
Used to specify the sub type of selected objects e.g face of an element, edge of an element ..etc
|
CartesianCoordinateSystem
Represents a cartesian coordinate system
To create a new instance of this class, use CoordinateSystemCollection.createCoordinateSystem(nxopen.Point3d, nxopen.Matrix3x3, boolean) Created in NX4.0.0 |
CoordinateSystem
Represents a coordinate system
This is an abstract class . |
Curve
Represents a curve.
|
DisplayableObject
Base class for all objects that are displayable.
|
Enum
Base class for all NX Open enums.
|
Face
Represents a face .
|
FeatureProcessBuilderStatus
.
|
InferSnapType.SnapType
Specify the snap point type
|
INXObject
Represents an interface from which most NXOpen classes inherit .
|
ListingWindow.DeviceType
Describes the type of listing window
|
Matrix3x3
Represents a 3 x 3 matrix .
|
NXColor
Represents a standard NX color.
|
NXException
A base class for exceptions thrown by NXOpen methods
|
NXObject
A base class providing low-level services for most NXOpen classes.
|
ObjectList.DeleteOption
Used to indicate whether to delete the object
when removing it from the list
|
Plane
Represents an
Plane class. |
Point
Represents a smart
Point . |
Point3d
Represents three-dimensional cartesian coordinates for a point .
|
ScCollector
Sc Collector
To create a new instance of this class, use ScCollectorCollection.createCollector() Created in NX4.0.0 |
Section
Represents a section
Section consists of "chained_entity", a chain or a single entity of edge or curve. |
SectionList
Represents a list of objects.
|
SelectBodyList
Represents a list of objects on a selection list.
|
SelectFaceList
Represents a list of objects on a selection list.
|
SelectLine
Represents a single object selection.
|
SelectNXObject
Represents a single object selection.
|
SelectNXObjectList
Represents a list of objects on a selection list.
|
SelectObject
Represents a single object selection.
|
SelectPoint
Represents a single object selection.
|
SelectPointList
Represents a list of objects on a selection list.
|
SelectTaggedObject
Represents a single object selection.
|
SelectTaggedObjectList
Represents a list of objects on a selection list.
|
SmartObject
Represents a smart object.
|
TaggedObject
An object which has a Tag
|
TaggedObjectCollection
A base class for all NXOpen tagged object collections
|
Vector3d
Represents a three-dimensional vector .
|
View
Represents a view.
|
Class and Description |
---|
Enum
Base class for all NX Open enums.
|
NXException
A base class for exceptions thrown by NXOpen methods
|
NXObject
A base class providing low-level services for most NXOpen classes.
|
TaggedObject
An object which has a Tag
|
Vector3d
Represents a three-dimensional vector .
|
Class and Description |
---|
Body
Represents a Body
.
|
Builder
A Builder is an object that is used to create and edit other objects.
|
CartesianCoordinateSystem
Represents a cartesian coordinate system
To create a new instance of this class, use CoordinateSystemCollection.createCoordinateSystem(nxopen.Point3d, nxopen.Matrix3x3, boolean) Created in NX4.0.0 |
Curve
Represents a curve.
|
DisplayableObject
Base class for all objects that are displayable.
|
Edge |
Enum
Base class for all NX Open enums.
|
Expression
Represents an expression.
|
ICurve
Represents something containing a two dimensional modeling curve .
|
ILocation
Represents something that can be supplied to an location selection .
|
INXObject
Represents an interface from which most NXOpen classes inherit .
|
IOrientation
Represents something that can be supplied to an orientation selection .
|
IProfile
Represents something that can be supplied to a profile .
|
ISurface
Represents something containing a two dimensional surface .
|
Matrix3x3
Represents a 3 x 3 matrix .
|
NXColor
Represents a standard NX color.
|
NXException
A base class for exceptions thrown by NXOpen methods
|
NXObject
A base class providing low-level services for most NXOpen classes.
|
ObjectList.DeleteOption
Used to indicate whether to delete the object
when removing it from the list
|
Plane
Represents an
Plane class. |
Point
Represents a smart
Point . |
Point3d
Represents three-dimensional cartesian coordinates for a point .
|
ScCollector
Sc Collector
To create a new instance of this class, use ScCollectorCollection.createCollector() Created in NX4.0.0 |
Section
Represents a section
Section consists of "chained_entity", a chain or a single entity of edge or curve. |
SelectBody
Represents a single object selection.
|
SelectBodyList
Represents a list of objects on a selection list.
|
SelectCartesianCoordinateSystem
Represents a single object selection.
|
SelectCoordinateSystem
Represents a single object selection.
|
SelectDisplayableObjectList
Represents a list of objects on a selection list.
|
SelectNXObject
Represents a single object selection.
|
SelectNXObjectList
Represents a list of objects on a selection list.
|
SelectPointList
Represents a list of objects on a selection list.
|
TaggedObject
An object which has a Tag
|
TaggedObjectCollection
A base class for all NXOpen tagged object collections
|
TransientObject
A base class for all NXOpen transient objects
|
Vector3d
Represents a three-dimensional vector .
|
View
Represents a view.
|
Class and Description |
---|
Builder
A Builder is an object that is used to create and edit other objects.
|
DatumPlane
Represents a datum plane
This object can not be created by KF it's the display objet of the datum plane . |
Decal
Represents a Material Texture decal pair
This class is restricted to being called from a program running during an Interactive NX session. |
DisplayableObject
Base class for all objects that are displayable.
|
DisplayableObject.ObjectFont
specifies the object font for objects such as lines .
|
DisplayableObject.ObjectWidth
specifies object width for objects such as lines and text .
|
Enum
Base class for all NX Open enums.
|
Expression
Represents an expression.
|
IFitTo |
INXObject
Represents an interface from which most NXOpen classes inherit .
|
Layout
Represents a layout.
|
LightType
The type of a light.
|
Matrix3x3
Represents a 3 x 3 matrix .
|
ModelingView
Represents a Modeling View
Modeling Views may only be created by Save As. |
NXColor
Represents a standard NX color.
|
NXException
A base class for exceptions thrown by NXOpen methods
|
NXObject
A base class providing low-level services for most NXOpen classes.
|
PartLoadStatus
Represents a list of part names with associated status codes.
|
Plane
Represents an
Plane class. |
Point
Represents a smart
Point . |
Point3d
Represents three-dimensional cartesian coordinates for a point .
|
SelectINXObjectList
Represents a list of objects on a selection list.
|
SelectNXObjectList
Represents a list of objects on a selection list.
|
TaggedObject
An object which has a Tag
|
TaggedObjectCollection
A base class for all NXOpen tagged object collections
|
TransientObject
A base class for all NXOpen transient objects
|
Update.Option
Specifies whether a method should perform an update or not.
|
Vector3d
Represents a three-dimensional vector .
|
View
Represents a view.
|
Class and Description |
---|
Builder
A Builder is an object that is used to create and edit other objects.
|
DisplayableObject
Base class for all objects that are displayable.
|
Enum
Base class for all NX Open enums.
|
Matrix3x3
Represents a 3 x 3 matrix .
|
NXColor
Represents a standard NX color.
|
NXException
A base class for exceptions thrown by NXOpen methods
|
NXObject
A base class providing low-level services for most NXOpen classes.
|
ObjectList.DeleteOption
Used to indicate whether to delete the object
when removing it from the list
|
Part
Represents an NX part of type .prt.
|
Plane
Represents an
Plane class. |
Point
Represents a smart
Point . |
Point3d
Represents three-dimensional cartesian coordinates for a point .
|
SelectNXObjectList
Represents a list of objects on a selection list.
|
SelectTaggedObject
Represents a single object selection.
|
SelectTaggedObjectList
Represents a list of objects on a selection list.
|
TaggedObject
An object which has a Tag
|
TransientObject
A base class for all NXOpen transient objects
|
Vector3d
Represents a three-dimensional vector .
|
View
Represents a view.
|
Class and Description |
---|
Builder
A Builder is an object that is used to create and edit other objects.
|
CaeObjectType.CaeSubType
Used to specify the sub type of selected objects e.g face of an element, edge of an element ..etc
|
CartesianCoordinateSystem
Represents a cartesian coordinate system
To create a new instance of this class, use CoordinateSystemCollection.createCoordinateSystem(nxopen.Point3d, nxopen.Matrix3x3, boolean) Created in NX4.0.0 |
DisplayableObject
Base class for all objects that are displayable.
|
Enum
Base class for all NX Open enums.
|
Expression
Represents an expression.
|
IBaseCurve
Represents something containing a two dimensional curve .
|
ICurve
Represents something containing a two dimensional modeling curve .
|
IFitTo |
InferSnapType.SnapType
Specify the snap point type
|
INXObject
Represents an interface from which most NXOpen classes inherit .
|
LineColorFontWidthBuilder
Represent a
LineColorFontWidthBuilder
This is a sub-builder class and cannot be directly instantiated Created in NX9.0.0 |
Matrix3x3
Represents a 3 x 3 matrix .
|
ModelingView
Represents a Modeling View
Modeling Views may only be created by Save As. |
NXColor
Represents a standard NX color.
|
NXException
A base class for exceptions thrown by NXOpen methods
|
NXObject
A base class providing low-level services for most NXOpen classes.
|
ObjectList.DeleteOption
Used to indicate whether to delete the object
when removing it from the list
|
Part
Represents an NX part of type .prt.
|
Point
Represents a smart
Point . |
Point3d
Represents three-dimensional cartesian coordinates for a point .
|
ScCollector
Sc Collector
To create a new instance of this class, use ScCollectorCollection.createCollector() Created in NX4.0.0 |
Section
Represents a section
Section consists of "chained_entity", a chain or a single entity of edge or curve. |
SelectFaceList
Represents a list of objects on a selection list.
|
SelectionMethod
Represents the output from a smart selector method
This is an abstract class, and cannot be created. |
SelectNXObject
Represents a single object selection.
|
SelectNXObjectList
Represents a list of objects on a selection list.
|
SelectObject
Represents a single object selection.
|
SelectObjectList
Represents a list of objects on a selection list.
|
SelectTaggedObject
Represents a single object selection.
|
SelectView
Represents a single object selection.
|
Sketch
Represents a sketch
Use the SketchCollection class to create a sketch. |
TaggedObject
An object which has a Tag
|
TaggedObjectCollection
A base class for all NXOpen tagged object collections
|
TransientObject
A base class for all NXOpen transient objects
|
Vector3d
Represents a three-dimensional vector .
|
View
Represents a view.
|
Xform
Represents a smart xform
To create a new instance of this class, use XformCollection.createXform(nxopen.Point3d, nxopen.Vector3d, nxopen.Vector3d, nxopen.SmartObject.UpdateOption, double) Created in NX3.0.0 |
Class and Description |
---|
Body
Represents a Body
.
|
Builder
A Builder is an object that is used to create and edit other objects.
|
CaeObjectType.CaeSubType
Used to specify the sub type of selected objects e.g face of an element, edge of an element ..etc
|
DisplayableObject
Base class for all objects that are displayable.
|
Enum
Base class for all NX Open enums.
|
Expression
Represents an expression.
|
Face
Represents a face .
|
IBaseCurve
Represents something containing a two dimensional curve .
|
ICurve
Represents something containing a two dimensional modeling curve .
|
IFitTo |
InferSnapType.SnapType
Specify the snap point type
|
INXObject
Represents an interface from which most NXOpen classes inherit .
|
IParameterizedSurface
Represents something containing a face .
|
NXException
A base class for exceptions thrown by NXOpen methods
|
NXObject
A base class providing low-level services for most NXOpen classes.
|
Part
Represents an NX part of type .prt.
|
Plane
Represents an
Plane class. |
Point
Represents a smart
Point . |
Point3d
Represents three-dimensional cartesian coordinates for a point .
|
Section
Represents a section
Section consists of "chained_entity", a chain or a single entity of edge or curve. |
SectionList
Represents a list of objects.
|
SelectDisplayableObjectList
Represents a list of objects on a selection list.
|
SelectICurveList
Represents a list of objects on a selection list.
|
SelectionMethod
Represents the output from a smart selector method
This is an abstract class, and cannot be created. |
SelectNXObjectList
Represents a list of objects on a selection list.
|
SelectObject
Represents a single object selection.
|
SelectPointList
Represents a list of objects on a selection list.
|
Spline
Represents a spline curve.
|
TaggedObject
An object which has a Tag
|
TaggedObjectCollection
A base class for all NXOpen tagged object collections
|
Vector3d
Represents a three-dimensional vector .
|
View
Represents a view.
|
Class and Description |
---|
Arc
Represents an arc curve.
|
AxisOrientation
Specifies axis orientation .
|
Body
Represents a Body
.
|
Builder
A Builder is an object that is used to create and edit other objects.
|
CaeObjectType.CaeSubType
Used to specify the sub type of selected objects e.g face of an element, edge of an element ..etc
|
CartesianCoordinateSystem
Represents a cartesian coordinate system
To create a new instance of this class, use CoordinateSystemCollection.createCoordinateSystem(nxopen.Point3d, nxopen.Matrix3x3, boolean) Created in NX4.0.0 |
CoordinateSystem
Represents a coordinate system
This is an abstract class . |
Curve
Represents a curve.
|
CutView
Represents a Cut View
Cut Views may only be created via a Master Cut Builder. |
DatumConstraint
Represents a constraint that specifies the location of a
nxopen.features.DatumFeature . |
DatumPlane
Represents a datum plane
This object can not be created by KF it's the display objet of the datum plane . |
DisplayableObject
Base class for all objects that are displayable.
|
Edge |
Enum
Base class for all NX Open enums.
|
ErrorList
Represents a list of errors .
|
Expression
Represents an expression.
|
ExpressionCollectorSetList
Represents a list of objects.
|
ExpressionSectionSetList
Represents a list of objects.
|
Face
Represents a face .
|
HumanData.AdvancedScalingType
This enum represents the types of the advanced scaling variable names
|
HumanData.DatabaseType
This enum represents the database used for human creation
|
HumanData.EditDisplayBodyParts
This enum represents the body parts of edit human display
|
HumanData.GenderType
This enum represents the gender of human
|
HumanData.HandGoalType
This enum represents the type to define hand goal position
|
HumanData.InverseKinematicsBalanceType
This enum represents the balance type of active reach
|
HumanData.InverseKinematicsBodyParts
This enum represents the body parts of dynamic drag
|
HumanData.InverseKinematicsHeadEyeType
This enum represents the head and eye type of active reach
|
HumanData.InverseKinematicsInitJoint
This enum represents the motion initiation joint of hand dynamic drag
|
HumanData.InverseKinematicsType
This enum represents the types of inverse kinematics
|
HumanData.JointType
This enum represents the types of the joint names
|
HumanData.ReferencePointType
This enum represents the location of the reference point
|
HumanData.SegmentScalingType
This enum represents the types of the segment scaling variable names
|
HumanData.SideType
This enum represents the types of human side
|
HumanData.StatureType
This enum represents the stature data type of human
|
HumanData.StatureUnitType
This enum represents the unit for stature
|
HumanData.WeightType
This enum represents the weight data type of human
|
HumanData.WeightUnitType
This enum represents the unit for weight
|
HumanPosturePrediction
Represent posture prediction object
To create or edit an instance of this class, use HumanPosturePredictionBuilder Created in NX5.0.0 |
HumanPosturePredictionBuilder
Represents a Human Posture Prediction Builder.
|
HumanReachZone
Represents a human reach zone.
|
ICurve
Represents something containing a two dimensional modeling curve .
|
InferSnapType.SnapType
Specify the snap point type
|
INXObject
Represents an interface from which most NXOpen classes inherit .
|
ISurface
Represents something containing a two dimensional surface .
|
Line
Represents a line curve.
|
Matrix3x3
Represents a 3 x 3 matrix .
|
MeshParameterData
Represents surface rebuild data structure.
|
MeshParameterData.FeatureType
Mesh surface feature types.
|
MeshProfileString
Represents Mesh profile string
To create a new instance of this class, use MeshSurfaceBuilder.newProfile() Created in NX4.0.0 |
MeshProfileString.InsertOrder
Profile string insert orders.
|
MeshProfileString.SelectedPoint
Mesh surface profile string point types.
|
MeshProfileString.Type
Mesh surface profile string types.
|
ModelingView
Represents a Modeling View
Modeling Views may only be created by Save As. |
NXColor
Represents a standard NX color.
|
NXException
A base class for exceptions thrown by NXOpen methods
|
NXObject
A base class providing low-level services for most NXOpen classes.
|
NXObjectList
Represents a list of objects.
|
ObjectList
Represents a list of objects.
|
ObjectList.DeleteOption
Used to indicate whether to delete the object
when removing it from the list
|
Offset
Represents a
Offset . |
Part
Represents an NX part of type .prt.
|
Plane
Represents an
Plane class. |
PlaneList
Represents a list of objects.
|
Point
Represents a smart
Point . |
Point3d
Represents three-dimensional cartesian coordinates for a point .
|
PointList
Represents a list of objects.
|
Polyline
Represents a polyline curve.
|
PositioningDimension
Represents a dimension object attached to the feature
Intances of this object cannot be directly be created. |
PositioningDimension.Subtype
Represents the subtype of the positioning dimension
|
Scalar
Represents a scalar.
|
ScalarMatrixValue
Represents a General M x N matrix of scalar (real) values.
|
ScCollector
Sc Collector
To create a new instance of this class, use ScCollectorCollection.createCollector() Created in NX4.0.0 |
Section
Represents a section
Section consists of "chained_entity", a chain or a single entity of edge or curve. |
SectionList
Represents a list of objects.
|
SelectBody
Represents a single object selection.
|
SelectBodyList
Represents a list of objects on a selection list.
|
SelectCartesianCoordinateSystem
Represents a single object selection.
|
SelectCoordinateSystem
Represents a single object selection.
|
SelectCurve
Represents a single object selection.
|
SelectCurveList
Represents a list of objects on a selection list.
|
SelectDatumPlane
Represents a single object selection.
|
SelectDisplayableObject
Represents a single object selection.
|
SelectDisplayableObjectList
Represents a list of objects on a selection list.
|
SelectEdge
Represents a single object selection.
|
SelectFace
Represents a single object selection.
|
SelectFaceList
Represents a list of objects on a selection list.
|
SelectICurve
Represents a single object selection.
|
SelectionIntentRule
Represents a
SelectionIntentRule which essentially provides capabilities to collect
curves, edges, faces and bodies. |
SelectionMethod
Represents the output from a smart selector method
This is an abstract class, and cannot be created. |
SelectISurface
Represents a single object selection.
|
SelectNXObject
Represents a single object selection.
|
SelectNXObjectList
Represents a list of objects on a selection list.
|
SelectObject
Represents a single object selection.
|
SelectObjectList
Represents a list of objects on a selection list.
|
SelectPoint
Represents a single object selection.
|
SelectPointList
Represents a list of objects on a selection list.
|
SelectSketch
Represents a single object selection.
|
SelectSpline
Represents a single object selection.
|
SelectTaggedObject
Represents a single object selection.
|
SelectTaggedObjectList
Represents a list of objects on a selection list.
|
Sense
Specifies sense direction .
|
Sketch
Represents a sketch
Use the SketchCollection class to create a sketch. |
Spline
Represents a spline curve.
|
SurfaceRebuildData
Represents surface rebuild data structure.
|
TaggedObject
An object which has a Tag
|
TaggedObjectCollection
A base class for all NXOpen tagged object collections
|
TransientObject
A base class for all NXOpen transient objects
|
Vector3d
Represents a three-dimensional vector .
|
View
Represents a view.
|
Class and Description |
---|
Body
Represents a Body
.
|
Builder
A Builder is an object that is used to create and edit other objects.
|
CoordinateSystem
Represents a coordinate system
This is an abstract class . |
Edge |
Enum
Base class for all NX Open enums.
|
Expression
Represents an expression.
|
ExpressionCollectorSet
An object that binds an expression with an entity section in the context of a list.
|
Face
Represents a face .
|
INXObject
Represents an interface from which most NXOpen classes inherit .
|
ISurface
Represents something containing a two dimensional surface .
|
NXException
A base class for exceptions thrown by NXOpen methods
|
NXObject
A base class providing low-level services for most NXOpen classes.
|
ObjectList.DeleteOption
Used to indicate whether to delete the object
when removing it from the list
|
Plane
Represents an
Plane class. |
Point
Represents a smart
Point . |
Point3d
Represents three-dimensional cartesian coordinates for a point .
|
ScCollector
Sc Collector
To create a new instance of this class, use ScCollectorCollection.createCollector() Created in NX4.0.0 |
Section
Represents a section
Section consists of "chained_entity", a chain or a single entity of edge or curve. |
SelectBody
Represents a single object selection.
|
SelectDisplayableObject
Represents a single object selection.
|
SelectEdge
Represents a single object selection.
|
SelectFace
Represents a single object selection.
|
SelectFaceList
Represents a list of objects on a selection list.
|
SelectISurface
Represents a single object selection.
|
SelectNXObjectList
Represents a list of objects on a selection list.
|
Sketch
Represents a sketch
Use the SketchCollection class to create a sketch. |
TaggedObject
An object which has a Tag
|
TaggedObjectList
Represents a list of objects.
|
Vector3d
Represents a three-dimensional vector .
|
Class and Description |
---|
Body
Represents a Body
.
|
Builder
A Builder is an object that is used to create and edit other objects.
|
CoordinateSystem
Represents a coordinate system
This is an abstract class . |
DisplayableObject
Base class for all objects that are displayable.
|
Edge |
EndCutBlockBuilder
Represents a End Cut Block Builder.
|
Enum
Base class for all NX Open enums.
|
ErrorList
Represents a list of errors .
|
Expression
Represents an expression.
|
ExpressionCollectorSetList
Represents a list of objects.
|
Face
Represents a face .
|
IAttributeSourceObjectBuilder
Represents an interface to perform various database operations on an array of
NXObject . |
ICurve
Represents something containing a two dimensional modeling curve .
|
INXObject
Represents an interface from which most NXOpen classes inherit .
|
NXColor
Represents a standard NX color.
|
NXException
A base class for exceptions thrown by NXOpen methods
|
NXObject
A base class providing low-level services for most NXOpen classes.
|
NXObjectList
Represents a list of objects.
|
ObjectList.DeleteOption
Used to indicate whether to delete the object
when removing it from the list
|
Part
Represents an NX part of type .prt.
|
Plane
Represents an
Plane class. |
Point
Represents a smart
Point . |
Point3d
Represents three-dimensional cartesian coordinates for a point .
|
RegionPointList
Represents a list of objects.
|
ScCollector
Sc Collector
To create a new instance of this class, use ScCollectorCollection.createCollector() Created in NX4.0.0 |
Section
Represents a section
Section consists of "chained_entity", a chain or a single entity of edge or curve. |
SelectBody
Represents a single object selection.
|
SelectBodyList
Represents a list of objects on a selection list.
|
SelectCurve
Represents a single object selection.
|
SelectDatumPlane
Represents a single object selection.
|
SelectDatumPlaneList
Represents a list of objects on a selection list.
|
SelectDisplayableObject
Represents a single object selection.
|
SelectDisplayableObjectList
Represents a list of objects on a selection list.
|
SelectEdge
Represents a single object selection.
|
SelectEdgeList
Represents a list of objects on a selection list.
|
SelectFace
Represents a single object selection.
|
SelectFaceList
Represents a list of objects on a selection list.
|
SelectIBasePlaneList
Represents a list of objects on a selection list.
|
SelectNXObject
Represents a single object selection.
|
SelectNXObjectList
Represents a list of objects on a selection list.
|
SelectPoint
Represents a single object selection.
|
SelectPointList
Represents a list of objects on a selection list.
|
SelectTaggedObject
Represents a single object selection.
|
SelectTaggedObjectList
Represents a list of objects on a selection list.
|
Sketch
Represents a sketch
Use the SketchCollection class to create a sketch. |
SketchExpressionModifierBuilder
Represents a Sketch Expression Modifier Builder.
|
TaggedObject
An object which has a Tag
|
TaggedObjectCollection
A base class for all NXOpen tagged object collections
|
Vector3d
Represents a three-dimensional vector .
|
View
Represents a view.
|
Class and Description |
---|
Builder
A Builder is an object that is used to create and edit other objects.
|
CoordinateSystem
Represents a coordinate system
This is an abstract class . |
DisplayableObject
Base class for all objects that are displayable.
|
Enum
Base class for all NX Open enums.
|
Expression
Represents an expression.
|
NXException
A base class for exceptions thrown by NXOpen methods
|
NXObject
A base class providing low-level services for most NXOpen classes.
|
ObjectList.DeleteOption
Used to indicate whether to delete the object
when removing it from the list
|
Plane
Represents an
Plane class. |
Point
Represents a smart
Point . |
Point3d
Represents three-dimensional cartesian coordinates for a point .
|
Polyline
Represents a polyline curve.
|
ScCollector
Sc Collector
To create a new instance of this class, use ScCollectorCollection.createCollector() Created in NX4.0.0 |
SelectDisplayableObject
Represents a single object selection.
|
SelectDisplayableObjectList
Represents a list of objects on a selection list.
|
SelectNXObject
Represents a single object selection.
|
TaggedObject
An object which has a Tag
|
TaggedObjectCollection
A base class for all NXOpen tagged object collections
|
Vector3d
Represents a three-dimensional vector .
|
View
Represents a view.
|
Class and Description |
---|
Builder
A Builder is an object that is used to create and edit other objects.
|
CoordinateSystem
Represents a coordinate system
This is an abstract class . |
DatumPlane
Represents a datum plane
This object can not be created by KF it's the display objet of the datum plane . |
Enum
Base class for all NX Open enums.
|
Expression
Represents an expression.
|
Matrix3x3
Represents a 3 x 3 matrix .
|
NXColor
Represents a standard NX color.
|
NXException
A base class for exceptions thrown by NXOpen methods
|
NXObject
A base class providing low-level services for most NXOpen classes.
|
ObjectList.DeleteOption
Used to indicate whether to delete the object
when removing it from the list
|
Part
Represents an NX part of type .prt.
|
Plane
Represents an
Plane class. |
Point
Represents a smart
Point . |
Point3d
Represents three-dimensional cartesian coordinates for a point .
|
ScCollector
Sc Collector
To create a new instance of this class, use ScCollectorCollection.createCollector() Created in NX4.0.0 |
Section
Represents a section
Section consists of "chained_entity", a chain or a single entity of edge or curve. |
SelectBodyList
Represents a list of objects on a selection list.
|
SelectCurve
Represents a single object selection.
|
SelectCurveList
Represents a list of objects on a selection list.
|
SelectDisplayableObjectList
Represents a list of objects on a selection list.
|
SelectSketch
Represents a single object selection.
|
Sketch
Represents a sketch
Use the SketchCollection class to create a sketch. |
TaggedObject
An object which has a Tag
|
Class and Description |
---|
BasePart
Base class for an NX part.
|
Builder
A Builder is an object that is used to create and edit other objects.
|
CoordinateSystem
Represents a coordinate system
This is an abstract class . |
DisplayableObject
Base class for all objects that are displayable.
|
Enum
Base class for all NX Open enums.
|
Expression
Represents an expression.
|
IFitTo |
INXObject
Represents an interface from which most NXOpen classes inherit .
|
NXColor
Represents a standard NX color.
|
NXException
A base class for exceptions thrown by NXOpen methods
|
NXObject
A base class providing low-level services for most NXOpen classes.
|
ObjectList.DeleteOption
Used to indicate whether to delete the object
when removing it from the list
|
Point
Represents a smart
Point . |
SelectNXObjectList
Represents a list of objects on a selection list.
|
SelectObjectList
Represents a list of objects on a selection list.
|
TaggedObject
An object which has a Tag
|
TaggedObjectCollection
A base class for all NXOpen tagged object collections
|
TransientObject
A base class for all NXOpen transient objects
|
Unit |
Class and Description |
---|
Builder
A Builder is an object that is used to create and edit other objects.
|
Enum
Base class for all NX Open enums.
|
Expression
Represents an expression.
|
NXException
A base class for exceptions thrown by NXOpen methods
|
NXObject
A base class providing low-level services for most NXOpen classes.
|
Part
Represents an NX part of type .prt.
|
Point
Represents a smart
Point . |
Point3d
Represents three-dimensional cartesian coordinates for a point .
|
SelectNXObject
Represents a single object selection.
|
TaggedObject
An object which has a Tag
|
TransientObject
A base class for all NXOpen transient objects
|
Vector3d
Represents a three-dimensional vector .
|
Class and Description |
---|
BasePart.BookmarkOption
Controls the information written to a bookmark file.
|
Builder
A Builder is an object that is used to create and edit other objects.
|
Enum
Base class for all NX Open enums.
|
NXException
A base class for exceptions thrown by NXOpen methods
|
NXObject
A base class providing low-level services for most NXOpen classes.
|
Point3d
Represents three-dimensional cartesian coordinates for a point .
|
TaggedObject
An object which has a Tag
|
Class and Description |
---|
Builder
A Builder is an object that is used to create and edit other objects.
|
Curve
Represents a curve.
|
DisplayableObject
Base class for all objects that are displayable.
|
Enum
Base class for all NX Open enums.
|
Expression
Represents an expression.
|
Face
Represents a face .
|
IFitTo |
INXObject
Represents an interface from which most NXOpen classes inherit .
|
Matrix3x3
Represents a 3 x 3 matrix .
|
NXException
A base class for exceptions thrown by NXOpen methods
|
NXObject
A base class providing low-level services for most NXOpen classes.
|
Plane
Represents an
Plane class. |
Point
Represents a smart
Point . |
Point3d
Represents three-dimensional cartesian coordinates for a point .
|
ScCollector
Sc Collector
To create a new instance of this class, use ScCollectorCollection.createCollector() Created in NX4.0.0 |
Section
Represents a section
Section consists of "chained_entity", a chain or a single entity of edge or curve. |
SelectDisplayableObject
Represents a single object selection.
|
SelectDisplayableObjectList
Represents a list of objects on a selection list.
|
SelectIBaseCurve
Represents a single object selection.
|
SelectIParameterizedSurface
Represents a single object selection.
|
SelectNXObject
Represents a single object selection.
|
SelectNXObjectList
Represents a list of objects on a selection list.
|
SelectObject
Represents a single object selection.
|
SelectObjectList
Represents a list of objects on a selection list.
|
SelectPointList
Represents a list of objects on a selection list.
|
TaggedObject
An object which has a Tag
|
TaggedObjectCollection
A base class for all NXOpen tagged object collections
|
TransientObject
A base class for all NXOpen transient objects
|
Vector3d
Represents a three-dimensional vector .
|
Class and Description |
---|
Builder
A Builder is an object that is used to create and edit other objects.
|
DisplayableObject
Base class for all objects that are displayable.
|
Enum
Base class for all NX Open enums.
|
IFitTo |
INXObject
Represents an interface from which most NXOpen classes inherit .
|
NXException
A base class for exceptions thrown by NXOpen methods
|
NXObject
A base class providing low-level services for most NXOpen classes.
|
Point
Represents a smart
Point . |
Point3d
Represents three-dimensional cartesian coordinates for a point .
|
ScCollector
Sc Collector
To create a new instance of this class, use ScCollectorCollection.createCollector() Created in NX4.0.0 |
SelectPoint
Represents a single object selection.
|
SelectPointList
Represents a list of objects on a selection list.
|
SelectTaggedObjectList
Represents a list of objects on a selection list.
|
TaggedObject
An object which has a Tag
|
Vector3d
Represents a three-dimensional vector .
|
Class and Description |
---|
Body
Represents a Body
.
|
Builder
A Builder is an object that is used to create and edit other objects.
|
CoordinateSystem
Represents a coordinate system
This is an abstract class . |
Curve
Represents a curve.
|
DisplayableObject
Base class for all objects that are displayable.
|
Edge |
Enum
Base class for all NX Open enums.
|
Expression
Represents an expression.
|
ExpressionCollectorSet
An object that binds an expression with an entity section in the context of a list.
|
ExpressionSectionSet
An object that binds an expression with an entity section in the context of a list.
|
Face
Represents a face .
|
INXObject
Represents an interface from which most NXOpen classes inherit .
|
Matrix3x3
Represents a 3 x 3 matrix .
|
NXException
A base class for exceptions thrown by NXOpen methods
|
NXObject
A base class providing low-level services for most NXOpen classes.
|
ObjectList
Represents a list of objects.
|
ObjectList.DeleteOption
Used to indicate whether to delete the object
when removing it from the list
|
Part
Represents an NX part of type .prt.
|
Plane
Represents an
Plane class. |
Point
Represents a smart
Point . |
Point2d
Represents two-dimensional cartesian coordinates for a point .
|
Point3d
Represents three-dimensional cartesian coordinates for a point .
|
RegionPointList
Represents a list of objects.
|
ScCollector
Sc Collector
To create a new instance of this class, use ScCollectorCollection.createCollector() Created in NX4.0.0 |
ScCollectorList
Represents a list of objects.
|
Section
Represents a section
Section consists of "chained_entity", a chain or a single entity of edge or curve. |
SelectCoordinateSystemList
Represents a list of objects on a selection list.
|
SelectCurve
Represents a single object selection.
|
SelectDisplayableObject
Represents a single object selection.
|
SelectDisplayableObjectList
Represents a list of objects on a selection list.
|
SelectEdge
Represents a single object selection.
|
SelectExpressionList
Represents a list of objects on a selection list.
|
SelectFace
Represents a single object selection.
|
SelectFaceList
Represents a list of objects on a selection list.
|
SelectISurface
Represents a single object selection.
|
SelectLine
Represents a single object selection.
|
SelectNXObject
Represents a single object selection.
|
SelectObject
Represents a single object selection.
|
SelectPointList
Represents a list of objects on a selection list.
|
SelectSmartObject
Represents a single object selection.
|
SelectSplineList
Represents a list of objects on a selection list.
|
SmartObject.UpdateOption
Specifies when the smart object updates.
|
Spline
Represents a spline curve.
|
TaggedObject
An object which has a Tag
|
TaggedObjectCollection
A base class for all NXOpen tagged object collections
|
TaggedObjectList
Represents a list of objects.
|
Vector3d
Represents a three-dimensional vector .
|
View
Represents a view.
|
Class and Description |
---|
Builder
A Builder is an object that is used to create and edit other objects.
|
Enum
Base class for all NX Open enums.
|
INXObject
Represents an interface from which most NXOpen classes inherit .
|
NXException
A base class for exceptions thrown by NXOpen methods
|
NXObject
A base class providing low-level services for most NXOpen classes.
|
Part
Represents an NX part of type .prt.
|
TaggedObject
An object which has a Tag
|
TaggedObjectCollection
A base class for all NXOpen tagged object collections
|
Class and Description |
---|
DisplayableObject
Base class for all objects that are displayable.
|
Enum
Base class for all NX Open enums.
|
INXObject
Represents an interface from which most NXOpen classes inherit .
|
NXException
A base class for exceptions thrown by NXOpen methods
|
NXObject
A base class providing low-level services for most NXOpen classes.
|
TaggedObject
An object which has a Tag
|
TaggedObjectCollection
A base class for all NXOpen tagged object collections
|
TransientObject
A base class for all NXOpen transient objects
|
View
Represents a view.
|
Class and Description |
---|
Builder
A Builder is an object that is used to create and edit other objects.
|
DisplayableObject
Base class for all objects that are displayable.
|
Enum
Base class for all NX Open enums.
|
INXObject
Represents an interface from which most NXOpen classes inherit .
|
Matrix3x3
Represents a 3 x 3 matrix .
|
NXException
A base class for exceptions thrown by NXOpen methods
|
NXObject
A base class providing low-level services for most NXOpen classes.
|
Part
Represents an NX part of type .prt.
|
Point
Represents a smart
Point . |
Point3d
Represents three-dimensional cartesian coordinates for a point .
|
SelectDisplayableObject
Represents a single object selection.
|
SelectNXObjectList
Represents a list of objects on a selection list.
|
Sketch
Represents a sketch
Use the SketchCollection class to create a sketch. |
TaggedObject
An object which has a Tag
|
TaggedObjectCollection
A base class for all NXOpen tagged object collections
|
Vector3d
Represents a three-dimensional vector .
|
Class and Description |
---|
Builder
A Builder is an object that is used to create and edit other objects.
|
DisplayableObject
Base class for all objects that are displayable.
|
DisplayableObject.ObjectFont
specifies the object font for objects such as lines .
|
DisplayableObject.ObjectWidth
specifies object width for objects such as lines and text .
|
Enum
Base class for all NX Open enums.
|
INXObject
Represents an interface from which most NXOpen classes inherit .
|
NXException
A base class for exceptions thrown by NXOpen methods
|
NXObject
A base class providing low-level services for most NXOpen classes.
|
Point2d
Represents two-dimensional cartesian coordinates for a point .
|
TaggedObject
An object which has a Tag
|
TaggedObjectCollection
A base class for all NXOpen tagged object collections
|
Class and Description |
---|
BasePart
Base class for an NX part.
|
Builder
A Builder is an object that is used to create and edit other objects.
|
CaeObjectType.CaeSubType
Used to specify the sub type of selected objects e.g face of an element, edge of an element ..etc
|
CoordinateSystem
Represents a coordinate system
This is an abstract class . |
DisplayableObject
Base class for all objects that are displayable.
|
Enum
Base class for all NX Open enums.
|
Expression
Represents an expression.
|
IFitTo |
InferSnapType.SnapType
Specify the snap point type
|
INXObject
Represents an interface from which most NXOpen classes inherit .
|
NXException
A base class for exceptions thrown by NXOpen methods
|
NXObject
A base class providing low-level services for most NXOpen classes.
|
ObjectList.DeleteOption
Used to indicate whether to delete the object
when removing it from the list
|
Point
Represents a smart
Point . |
Point3d
Represents three-dimensional cartesian coordinates for a point .
|
SelectDisplayableObject
Represents a single object selection.
|
SelectFaceList
Represents a list of objects on a selection list.
|
SelectionMethod
Represents the output from a smart selector method
This is an abstract class, and cannot be created. |
SelectNXObject
Represents a single object selection.
|
SelectNXObjectList
Represents a list of objects on a selection list.
|
SelectObject
Represents a single object selection.
|
TaggedObject
An object which has a Tag
|
TaggedObjectCollection
A base class for all NXOpen tagged object collections
|
TransientObject
A base class for all NXOpen transient objects
|
Unit |
View
Represents a view.
|
Class and Description |
---|
Enum
Base class for all NX Open enums.
|
NXException
A base class for exceptions thrown by NXOpen methods
|
TransientObject
A base class for all NXOpen transient objects
|
Class and Description |
---|
Face
Represents a face .
|
NXException
A base class for exceptions thrown by NXOpen methods
|
ScCollector
Sc Collector
To create a new instance of this class, use ScCollectorCollection.createCollector() Created in NX4.0.0 |
TaggedObject
An object which has a Tag
|
Class and Description |
---|
Builder
A Builder is an object that is used to create and edit other objects.
|
CaeObjectType.CaeSubType
Used to specify the sub type of selected objects e.g face of an element, edge of an element ..etc
|
CoordinateSystem
Represents a coordinate system
This is an abstract class . |
DisplayableObject
Base class for all objects that are displayable.
|
Enum
Base class for all NX Open enums.
|
Expression
Represents an expression.
|
Face
Represents a face .
|
IFitTo |
InferSnapType.SnapType
Specify the snap point type
|
INXObject
Represents an interface from which most NXOpen classes inherit .
|
NXException
A base class for exceptions thrown by NXOpen methods
|
NXMatrix
Represents an NX matrix.
|
NXObject
A base class providing low-level services for most NXOpen classes.
|
ObjectList.DeleteOption
Used to indicate whether to delete the object
when removing it from the list
|
Point
Represents a smart
Point . |
Point3d
Represents three-dimensional cartesian coordinates for a point .
|
SelectNXObject
Represents a single object selection.
|
SelectNXObjectList
Represents a list of objects on a selection list.
|
SelectTaggedObject
Represents a single object selection.
|
TaggedObject
An object which has a Tag
|
TaggedObjectCollection
A base class for all NXOpen tagged object collections
|
Unit |
Vector3d
Represents a three-dimensional vector .
|
View
Represents a view.
|
Class and Description |
---|
Builder
A Builder is an object that is used to create and edit other objects.
|
Enum
Base class for all NX Open enums.
|
NXException
A base class for exceptions thrown by NXOpen methods
|
NXObject
A base class providing low-level services for most NXOpen classes.
|
TaggedObject
An object which has a Tag
|
TaggedObjectCollection
A base class for all NXOpen tagged object collections
|
Class and Description |
---|
Enum
Base class for all NX Open enums.
|
NXException
A base class for exceptions thrown by NXOpen methods
|
TransientObject
A base class for all NXOpen transient objects
|
Class and Description |
---|
Enum
Base class for all NX Open enums.
|
INXObject
Represents an interface from which most NXOpen classes inherit .
|
NXException
A base class for exceptions thrown by NXOpen methods
|
NXObject
A base class providing low-level services for most NXOpen classes.
|
TaggedObject
An object which has a Tag
|
TransientObject
A base class for all NXOpen transient objects
|
Class and Description |
---|
AttributePropertiesBaseBuilder
Represents an
AttributePropertiesBaseBuilder to be used for creating attributes. |
AttributePropertiesBuilder
Represents an
AttributePropertiesBuilder . |
BasePart
Base class for an NX part.
|
Builder
A Builder is an object that is used to create and edit other objects.
|
CollaborativeDesign
A collaborative design is created in Teamcenter.
|
Enum
Base class for all NX Open enums.
|
ErrorList
Represents a list of errors .
|
IAttributeSourceObjectBuilder
Represents an interface to perform various database operations on an array of
NXObject . |
INXObject
Represents an interface from which most NXOpen classes inherit .
|
Matrix3x3
Represents a 3 x 3 matrix .
|
NXException
A base class for exceptions thrown by NXOpen methods
|
NXObject
A base class providing low-level services for most NXOpen classes.
|
Part
Represents an NX part of type .prt.
|
PartLoadStatus
Represents a list of part names with associated status codes.
|
Point3d
Represents three-dimensional cartesian coordinates for a point .
|
SelectDisplayableObjectList
Represents a list of objects on a selection list.
|
SelectNXObjectList
Represents a list of objects on a selection list.
|
TaggedObject
An object which has a Tag
|
TaggedObjectCollection
A base class for all NXOpen tagged object collections
|
TransientObject
A base class for all NXOpen transient objects
|
Class and Description |
---|
Builder
A Builder is an object that is used to create and edit other objects.
|
TaggedObject
An object which has a Tag
|
Class and Description |
---|
DisplayableObject
Base class for all objects that are displayable.
|
Enum
Base class for all NX Open enums.
|
Expression
Represents an expression.
|
IFitTo |
INXObject
Represents an interface from which most NXOpen classes inherit .
|
Matrix3x3
Represents a 3 x 3 matrix .
|
NXException
A base class for exceptions thrown by NXOpen methods
|
NXObject
A base class providing low-level services for most NXOpen classes.
|
Part
Represents an NX part of type .prt.
|
PartLoadStatus
Represents a list of part names with associated status codes.
|
Point3d
Represents three-dimensional cartesian coordinates for a point .
|
TaggedObject
An object which has a Tag
|
TaggedObjectCollection
A base class for all NXOpen tagged object collections
|
Vector3d
Represents a three-dimensional vector .
|
Class and Description |
---|
Builder
A Builder is an object that is used to create and edit other objects.
|
DisplayableObject.ObjectFont
specifies the object font for objects such as lines .
|
DisplayableObject.ObjectWidth
specifies object width for objects such as lines and text .
|
Enum
Base class for all NX Open enums.
|
Expression
Represents an expression.
|
INXObject
Represents an interface from which most NXOpen classes inherit .
|
NXColor
Represents a standard NX color.
|
NXColor.Rgb
RGB values
|
NXException
A base class for exceptions thrown by NXOpen methods
|
NXObject
A base class providing low-level services for most NXOpen classes.
|
TaggedObject
An object which has a Tag
|
Class and Description |
---|
Arc
Represents an arc curve.
|
Builder
A Builder is an object that is used to create and edit other objects.
|
CaeObjectType.CaeSubType
Used to specify the sub type of selected objects e.g face of an element, edge of an element ..etc
|
Conic
Represents a conic curve.
|
Curve
Represents a curve.
|
DisplayableObject
Base class for all objects that are displayable.
|
Enum
Base class for all NX Open enums.
|
ErrorList
Represents a list of errors .
|
Expression
Represents an expression.
|
IBaseCurve
Represents something containing a two dimensional curve .
|
ICurve
Represents something containing a two dimensional modeling curve .
|
IFitTo |
InferSnapType.SnapType
Specify the snap point type
|
INXObject
Represents an interface from which most NXOpen classes inherit .
|
IProfile
Represents something that can be supplied to a profile .
|
Line
Represents a line curve.
|
Matrix3x3
Represents a 3 x 3 matrix .
|
MeasureBuilder
Represents a
MeasureBuilder
This is an abstract class, and cannot be instantiated. |
MeasureDistanceBuilder
Represents a
MeasureDistanceBuilder
To create a new instance of this class, use MeasureManager.createMeasureDistanceBuilder(nxopen.NXObject) Created in NX5.0.0 |
NXColor
Represents a standard NX color.
|
NXException
A base class for exceptions thrown by NXOpen methods
|
NXObject
A base class providing low-level services for most NXOpen classes.
|
NXObject.AttributeType
Specifies attribute type.
|
ObjectList
Represents a list of objects.
|
ObjectList.DeleteOption
Used to indicate whether to delete the object
when removing it from the list
|
Part
Represents an NX part of type .prt.
|
Plane
Represents an
Plane class. |
Point
Represents a smart
Point . |
Point3d
Represents three-dimensional cartesian coordinates for a point .
|
PointList
Represents a list of objects.
|
Scalar
Represents a scalar.
|
ScCollector
Sc Collector
To create a new instance of this class, use ScCollectorCollection.createCollector() Created in NX4.0.0 |
Section
Represents a section
Section consists of "chained_entity", a chain or a single entity of edge or curve. |
SelectBody
Represents a single object selection.
|
SelectCurve
Represents a single object selection.
|
SelectCurveList
Represents a list of objects on a selection list.
|
SelectFaceList
Represents a list of objects on a selection list.
|
SelectNXObject
Represents a single object selection.
|
SelectNXObjectList
Represents a list of objects on a selection list.
|
SelectTaggedObjectList
Represents a list of objects on a selection list.
|
SmartObject
Represents a smart object.
|
Spline
Represents a spline curve.
|
TaggedObject
An object which has a Tag
|
TaggedObjectCollection
A base class for all NXOpen tagged object collections
|
TaggedObjectList
Represents a list of objects.
|
TransientObject
A base class for all NXOpen transient objects
|
Vector3d
Represents a three-dimensional vector .
|
View
Represents a view.
|
Xform
Represents a smart xform
To create a new instance of this class, use XformCollection.createXform(nxopen.Point3d, nxopen.Vector3d, nxopen.Vector3d, nxopen.SmartObject.UpdateOption, double) Created in NX3.0.0 |
Class and Description |
---|
Builder
A Builder is an object that is used to create and edit other objects.
|
Curve
Represents a curve.
|
Enum
Base class for all NX Open enums.
|
ErrorList
Represents a list of errors .
|
Expression
Represents an expression.
|
INXObject
Represents an interface from which most NXOpen classes inherit .
|
Matrix3x3
Represents a 3 x 3 matrix .
|
NavigatorFilter
Represents a
NavigatorFilter object. |
NXException
A base class for exceptions thrown by NXOpen methods
|
NXObject
A base class providing low-level services for most NXOpen classes.
|
Point
Represents a smart
Point . |
Point3d
Represents three-dimensional cartesian coordinates for a point .
|
TaggedObject
An object which has a Tag
|
TaggedObjectCollection
A base class for all NXOpen tagged object collections
|
Xform
Represents a smart xform
To create a new instance of this class, use XformCollection.createXform(nxopen.Point3d, nxopen.Vector3d, nxopen.Vector3d, nxopen.SmartObject.UpdateOption, double) Created in NX3.0.0 |
Class and Description |
---|
Builder
A Builder is an object that is used to create and edit other objects.
|
Enum
Base class for all NX Open enums.
|
NXException
A base class for exceptions thrown by NXOpen methods
|
Part
Represents an NX part of type .prt.
|
SelectNXObjectList
Represents a list of objects on a selection list.
|
TaggedObject
An object which has a Tag
|
Class and Description |
---|
Enum
Base class for all NX Open enums.
|
NXColor
Represents a standard NX color.
|
NXException
A base class for exceptions thrown by NXOpen methods
|
TaggedObject
An object which has a Tag
|
ViewDependentDisplayManager.Font
specifies the font for wireframe edits .
|
ViewDependentDisplayManager.Width
specifies the width for wireframe edits .
|
Class and Description |
---|
Builder
A Builder is an object that is used to create and edit other objects.
|
CartesianCoordinateSystem
Represents a cartesian coordinate system
To create a new instance of this class, use CoordinateSystemCollection.createCoordinateSystem(nxopen.Point3d, nxopen.Matrix3x3, boolean) Created in NX4.0.0 |
CoordinateSystem
Represents a coordinate system
This is an abstract class . |
Enum
Base class for all NX Open enums.
|
Expression
Represents an expression.
|
INXObject
Represents an interface from which most NXOpen classes inherit .
|
NXException
A base class for exceptions thrown by NXOpen methods
|
NXObject
A base class providing low-level services for most NXOpen classes.
|
ObjectList.DeleteOption
Used to indicate whether to delete the object
when removing it from the list
|
PlaneList
Represents a list of objects.
|
SelectDisplayableObjectList
Represents a list of objects on a selection list.
|
TaggedObject
An object which has a Tag
|
TaggedObjectCollection
A base class for all NXOpen tagged object collections
|
Class and Description |
---|
BasePart
Base class for an NX part.
|
BasePart.CloseModified
Indicates how part close should handle component parts when they are modified
|
BasePart.CloseWholeTree
Used to specify whether or not to close a part's components during a close operation.
|
Body
Represents a Body
.
|
BodyList
Represents a list of objects.
|
Builder
A Builder is an object that is used to create and edit other objects.
|
Curve
Represents a curve.
|
DisplayableObject
Base class for all objects that are displayable.
|
Edge |
Enum
Base class for all NX Open enums.
|
Expression
Represents an expression.
|
Face
Represents a face .
|
ICurve
Represents something containing a two dimensional modeling curve .
|
IFitTo |
INXObject
Represents an interface from which most NXOpen classes inherit .
|
Line
Represents a line curve.
|
Matrix3x3
Represents a 3 x 3 matrix .
|
NXColor
Represents a standard NX color.
|
NXException
A base class for exceptions thrown by NXOpen methods
|
NXObject
A base class providing low-level services for most NXOpen classes.
|
ObjectList.DeleteOption
Used to indicate whether to delete the object
when removing it from the list
|
Part
Represents an NX part of type .prt.
|
Plane
Represents an
Plane class. |
Point
Represents a smart
Point . |
Point3d
Represents three-dimensional cartesian coordinates for a point .
|
RegionPointList
Represents a list of objects.
|
ScCollector
Sc Collector
To create a new instance of this class, use ScCollectorCollection.createCollector() Created in NX4.0.0 |
Section
Represents a section
Section consists of "chained_entity", a chain or a single entity of edge or curve. |
SelectBody
Represents a single object selection.
|
SelectBodyList
Represents a list of objects on a selection list.
|
SelectCurve
Represents a single object selection.
|
SelectCurveList
Represents a list of objects on a selection list.
|
SelectDisplayableObjectList
Represents a list of objects on a selection list.
|
SelectEdge
Represents a single object selection.
|
SelectEdgeList
Represents a list of objects on a selection list.
|
SelectFace
Represents a single object selection.
|
SelectFaceList
Represents a list of objects on a selection list.
|
SelectNXObject
Represents a single object selection.
|
SelectNXObjectList
Represents a list of objects on a selection list.
|
SelectPart
Represents a single object selection.
|
SelectPartList
Represents a list of objects on a selection list.
|
SelectPlaneList
Represents a list of objects on a selection list.
|
SelectPoint
Represents a single object selection.
|
TaggedObject
An object which has a Tag
|
TaggedObjectCollection
A base class for all NXOpen tagged object collections
|
TransientObject
A base class for all NXOpen transient objects
|
Vector3d
Represents a three-dimensional vector .
|
Class and Description |
---|
Enum
Base class for all NX Open enums.
|
NXException
A base class for exceptions thrown by NXOpen methods
|
Tag
A tag used to identify an object within NX
|
Class and Description |
---|
Enum
Base class for all NX Open enums.
|
NXException
A base class for exceptions thrown by NXOpen methods
|
SelectionHandle
Represents a SelectionHandle for UI Styler .
|
TransientObject
A base class for all NXOpen transient objects
|
Class and Description |
---|
DisplayableObject
Base class for all objects that are displayable.
|
Enum
Base class for all NX Open enums.
|
IFitTo |
INXObject
Represents an interface from which most NXOpen classes inherit .
|
Matrix3x3
Represents a 3 x 3 matrix .
|
NXException
A base class for exceptions thrown by NXOpen methods
|
NXObject
A base class providing low-level services for most NXOpen classes.
|
Point3d
Represents three-dimensional cartesian coordinates for a point .
|
TaggedObject
An object which has a Tag
|
TransientObject
A base class for all NXOpen transient objects
|
Vector3d
Represents a three-dimensional vector .
|
View
Represents a view.
|
Class and Description |
---|
Builder
A Builder is an object that is used to create and edit other objects.
|
Enum
Base class for all NX Open enums.
|
Expression
Represents an expression.
|
IFitTo |
INXObject
Represents an interface from which most NXOpen classes inherit .
|
IProfile
Represents something that can be supplied to a profile .
|
NXException
A base class for exceptions thrown by NXOpen methods
|
NXObject
A base class providing low-level services for most NXOpen classes.
|
Part
Represents an NX part of type .prt.
|
TaggedObject
An object which has a Tag
|
TaggedObjectCollection
A base class for all NXOpen tagged object collections
|
Class and Description |
---|
Builder
A Builder is an object that is used to create and edit other objects.
|
Enum
Base class for all NX Open enums.
|
ErrorList
Represents a list of errors .
|
INXObject
Represents an interface from which most NXOpen classes inherit .
|
NXException
A base class for exceptions thrown by NXOpen methods
|
NXObject
A base class providing low-level services for most NXOpen classes.
|
Part
Represents an NX part of type .prt.
|
TaggedObject
An object which has a Tag
|
TaggedObjectCollection
A base class for all NXOpen tagged object collections
|
Validation
Represents an NX
Validation object. |
Validation.Result
Specifies result of the validation
|
Class and Description |
---|
Builder
A Builder is an object that is used to create and edit other objects.
|
DateBuilder
The DateBuilder class allows a date and/or time to be input or output via the DateItem builder.
|
Enum
Base class for all NX Open enums.
|
INXObject
Represents an interface from which most NXOpen classes inherit .
|
NXColor.Rgb
RGB values
|
NXException
A base class for exceptions thrown by NXOpen methods
|
NXObject
A base class providing low-level services for most NXOpen classes.
|
TaggedObject
An object which has a Tag
|
Class and Description |
---|
Builder
A Builder is an object that is used to create and edit other objects.
|
CaeObjectType.CaeSubType
Used to specify the sub type of selected objects e.g face of an element, edge of an element ..etc
|
CoordinateSystem
Represents a coordinate system
This is an abstract class . |
Curve
Represents a curve.
|
DisplayableObject
Base class for all objects that are displayable.
|
DisplayableObject.ObjectFont
specifies the object font for objects such as lines .
|
DisplayableObject.ObjectWidth
specifies object width for objects such as lines and text .
|
Edge |
Enum
Base class for all NX Open enums.
|
Expression
Represents an expression.
|
Face
Represents a face .
|
ICurve
Represents something containing a two dimensional modeling curve .
|
InferSnapType.SnapType
Specify the snap point type
|
INXObject
Represents an interface from which most NXOpen classes inherit .
|
LineColorFontWidthBuilder
Represent a
LineColorFontWidthBuilder
This is a sub-builder class and cannot be directly instantiated Created in NX9.0.0 |
Matrix3x3
Represents a 3 x 3 matrix .
|
NXColor
Represents a standard NX color.
|
NXException
A base class for exceptions thrown by NXOpen methods
|
NXObject
A base class providing low-level services for most NXOpen classes.
|
NXObjectList
Represents a list of objects.
|
ObjectList.DeleteOption
Used to indicate whether to delete the object
when removing it from the list
|
Part
Represents an NX part of type .prt.
|
Plane
Represents an
Plane class. |
Point
Represents a smart
Point . |
Point3d
Represents three-dimensional cartesian coordinates for a point .
|
ScCollector
Sc Collector
To create a new instance of this class, use ScCollectorCollection.createCollector() Created in NX4.0.0 |
Section
Represents a section
Section consists of "chained_entity", a chain or a single entity of edge or curve. |
SelectCurve
Represents a single object selection.
|
SelectCurveList
Represents a list of objects on a selection list.
|
SelectDisplayableObjectList
Represents a list of objects on a selection list.
|
SelectNXObject
Represents a single object selection.
|
SelectNXObjectList
Represents a list of objects on a selection list.
|
SelectPointList
Represents a list of objects on a selection list.
|
SelectTaggedObjectList
Represents a list of objects on a selection list.
|
TaggedObject
An object which has a Tag
|
TaggedObjectCollection
A base class for all NXOpen tagged object collections
|
Vector3d
Represents a three-dimensional vector .
|
View
Represents a view.
|
Copyright 2011 Siemens Product Lifecycle Management Software Inc. All Rights Reserved.