Package | Description |
---|---|
nxopen |
Provides classes and interfaces for the NX Open Common API.
|
nxopen.features.shipdesign |
Provides classes and interfaces for Ship Design.
|
nxopen.geometricanalysis |
Provides classes and interfaces for Geometric Analysis.
|
nxopen.geometricanalysis.sectionanalysis |
Provides classes and interfaces for Section Analysis.
|
nxopen.tooling |
Provides classes and interfaces for Tooling.
|
Class and Description |
---|
AnalysisManager
Represents the collection of analysis commands
To obtain an instance of this class, refer to BasePart Created in NX5.0.0 |
Class and Description |
---|
DupinBuilder
The Dupin Indicatrix is a tool to geometrically display the surface curvature at a specified point on a surface.
|
Class and Description |
---|
AnalysisObject
Represents an Analysis Object
This is an abstract class, and cannot be instantiated . |
AnalysisObjectCollection
Create a AnalysisObjectCollection
To obtain an instance of this class, refer to AnalysisManager Created in NX5.0.0 |
CurveAnalysisCombsBuilder
Deprecated.
Deprecated in NX8.5.0. Use
CurveCurvatureAnalysis .
|
CurveAnalysisCombsBuilder.DirectionOptionType
Deprecated.
Direction option types
|
CurveAnalysisDisplay
Represents a tool to control whether to show a curve's poles,knots,combs,peaks and inflections
To obtain an instance of this class, refer to AnalysisObjectCollection Created in NX6.0.0 |
CurveAnalysisDisplay.ShowFlagType
Deprecated.
|
CurveAnalysisInflectionsBuilder
Deprecated.
Deprecated in NX8.5.0. Use
GeometricAnalysis.CurveCurvatureAnalysis .
|
CurveAnalysisInflectionsBuilder.DirectionOptionType
Deprecated.
Direction option types
|
CurveAnalysisPeaksBuilder
Deprecated.
Deprecated in NX8.5.0. Use
GeometricAnalysis.CurveCurvatureAnalysis .
|
CurveAnalysisPeaksBuilder.DirectionOptionType
Deprecated.
Direction option types
|
CurveAnalysisRecord
Deprecated.
Deprecated in NX8.5.0. Use
CurveAnalysisDisplay .
|
CurveAnalysisRecord.DirectionOptionType
Deprecated.
Direction option types
|
CurveContinuityBuilder
Represents a curve continuity builder
To create a new instance of this class, use AnalysisObjectCollection.createCurveContinuityBuilder(nxopen.DisplayableObject) Default values. |
CurveCurvatureAnalysisBuilder
Represents a
CurveCurvatureAnalysis builder To create a new instance of this class, use AnalysisObjectCollection.createCurveCurvatureAnalysisBuilder(nxopen.DisplayableObject) Default values. |
CurveCurvatureAnalysisBuilder.CalculationMethod
Enumeration for needle calculation method
|
CurveCurvatureAnalysisBuilder.DisplayStyle
Enumeration for needle display type
|
CurveCurvatureAnalysisBuilder.LabelValues
Enumeration for label computation method
|
CurveCurvatureAnalysisBuilder.NeedleDirection
Enumeration for needle direction type
|
CurveCurvatureAnalysisBuilder.ProjectionTypes
Projection plane types
|
CurveCurvatureAnalysisBuilder.XyzTypes
Enumeration for X, Y or Z projection plane
|
DeviationChecking
Represents a
DeviationChecking
To create a new instance of this class, use AnalysisManager.createDeviationCheckingObject() Created in NX6.0.0 |
DeviationChecking.DeviationOptions
the deviation type to be shown
|
DeviationChecking.Types
the type of deviation checking to be performed
|
DeviationGaugeBuilder
DeviationGaugeBuilder class
To create a new instance of this class, use AnalysisObjectCollection.createDeviationGaugeBuilder(nxopen.DisplayableObject) Default values. |
DeviationGaugeBuilder.AdditionalValuesLabelType
This enum represents the Deviation Gauge Analysis Object additional values label type
|
DeviationGaugeBuilder.ColorPlotTypes
This enum represents the Deviation Gauge Analysis Object color plot types
|
DeviationGaugeBuilder.MeasurementMethodType
This enum represents the Deviation Gauge Analysis Object evaluation types
|
DeviationGaugeBuilder.MinMaxType
This enum represents the Deviation Gauge Analysis Object min max type
|
DeviationGaugeBuilder.ReportingPerTypes
This enum represents the Deviation Gauge Analysis Object reporting per setting
|
DeviationGaugeBuilder.XyzDirectionType
This enum represents the Deviation Gauge Analysis Object X, Y, Z direction options
|
DraftAnalysisBuilder
Represents a Draft Analysis builder
To create a new instance of this class, use AnalysisObjectCollection.createDraftAnalysisBuilder(nxopen.DisplayableObject) Default values. |
DraftAnalysisBuilder.DrawDirection
define draw direction items
|
DraftAnalysisBuilder.SelectOutput
define output options
|
ExamineGeometry
Represents the Examine Geometry class
To create a new instance of this class, use AnalysisManager.createExamineGeometryObject() Created in NX5.0.0 |
ExamineGeometry.Check
Types of checks
|
FaceCurvatureAnalysisBuilder
Represents a
FaceCurvatureAnalysisBuilder builder. |
FaceCurvatureAnalysisBuilder.CurvatureTypes
Represents the face curvature types.
|
FaceCurvatureAnalysisBuilder.DirectionTypes
Methods of specifiying the direction for normal and section curvatures.
|
FaceCurvatureAnalysisBuilder.DisplayTypes
Represents the display types.
|
FaceCurvatureAnalysisBuilder.ScaleTypes
Represents the scaling types for curvature values.
|
GapFlushness
Gap and Flushness analysis object class
To create or edit an instance of this class, use GapFlushnessBuilder Created in NX5.0.0 |
GapFlushnessBuilder
GapFlushnessBuilder class
To create a new instance of this class, use AnalysisObjectCollection.createGapFlushnessBuilder(nxopen.geometricanalysis.GapFlushness) Default values. |
GapFlushnessBuilder.DisplayOptions
This enum represents Label Display Option type
|
GapFlushnessBuilder.EvaluationModes
This enum represents evaluation mode
|
GapFlushnessBuilder.EvaluationTypes
This enum represents the Gap and Flushness Analysis Object evaluation types
|
GapFlushnessBuilder.PanelTypes
This enum represents panel type
|
GapFlushnessBuilder.SectionAlignments
This enum represents cross-section alignment type
|
GapFlushnessBuilder.SectionCurveOptions
This enum represents Cross Section Curves Options
|
GeometricProperties
Represents the Geometric Properties class.
|
GeometricProperties.CaeCurve
CAE Edge/Curve Geometric Properties
|
GeometricProperties.CaeCurvePropertiesData
This class holds the data returned from
GeometricProperties.getCaeCurveProperties(nxopen.NXObject, nxopen.Point3d) |
GeometricProperties.CaeFace
CAE Face Geometric Properties
|
GeometricProperties.CaeFacePropertiesData
This class holds the data returned from
GeometricProperties.getCaeFaceProperties(nxopen.NXObject, nxopen.Point3d) |
GeometricProperties.Edge
Edge/Curve Geometric Properties
|
GeometricProperties.EdgePropertiesData
This class holds the data returned from
GeometricProperties.getEdgeProperties(nxopen.NXObject, nxopen.Point3d) |
GeometricProperties.Entity
Type of input entity for geometric properties.
|
GeometricProperties.Face
Face Geometric Properties
|
GeometricProperties.FacePropertiesData
This class holds the data returned from
GeometricProperties.getFaceProperties(nxopen.NXObject, nxopen.Point3d) |
GeometricProperties.OutputType
Represents how to output geometric properties.
|
GeometricProperties.Status
Status of computing geometric properties.
|
HighlightLinesAnalysisBuilder
Represents a
HighlightLinesAnalysis
builder. |
HighlightLinesAnalysisBuilder.DisplayMethods
Deprecated.
Deprecated in NX8.0.0. Use
nxopen.geometricanalysis.HighlightLinesAnalysisBuilder#types2 and nxopen.geometricanalysis.HighlightLinesAnalysisBuilder#setTypes2 instead.
|
HighlightLinesAnalysisBuilder.LightPlacements
light placement
|
HighlightLinesAnalysisBuilder.LightPlaneOptions
light plane options
|
HighlightLinesAnalysisBuilder.Resolutions
resolution options
|
HighlightLinesAnalysisBuilder.Types
Deprecated.
Deprecated in NX8.0.0. Use
nxopen.geometricanalysis.HighlightLinesAnalysisBuilder#lightPlacements and nxopen.geometricanalysis.HighlightLinesAnalysisBuilder#setLightPlacements instead.
|
HighlightLinesAnalysisBuilder.Types2
four types of display methods
|
LocalRadiusAnalysis
Builder for Local Radius Analysis (formerly Dynamic Radius)
To create or edit an instance of this class, use LocalRadiusAnalysisBuilder Created in NX8.5.0 |
LocalRadiusAnalysisBuilder
Represents a
LocalRadiusAnalysis builder To create a new instance of this class, use AnalysisObjectCollection.createLocalRadiusAnalysisBuilder(nxopen.geometricanalysis.LocalRadiusAnalysis) Default values. |
SectionAnalysisObject
Represents a Section Analysis object.
|
SimpleInterference
Represents the Simple Interference object.
|
SimpleInterference.FaceInterferenceMethod
Specifies to "find only first pair of interfering faces" or "all
pairs of interfering faces" between the input boides.
|
SimpleInterference.InterferenceMethod
Specifies interference method, i.e., to highlight interfering
faces or create interference solid
|
SimpleInterference.Result
Specifies the result of a simple interference check
|
SolidDensity
Represents a
SolidDensity
To create a new instance of this class, use AnalysisManager.createSolidDensityObject() Created in NX5.0.0 |
SolidDensity.UnitsType
Types of units for solid density
|
SurfaceAnalysisDisplay
Represents a tool control whether to show a surface's poles and knots
To obtain an instance of this class, refer to AnalysisObjectCollection Created in NX6.0.0 |
SurfaceAnalysisDisplay.ShowFlagType
Show flag types
|
SurfaceContinuityAnalysisBuilder
Represents a
SurfaceContinuityAnalysis builder To create a new instance of this class, use AnalysisObjectCollection.createSurfaceContinuityAnalysisBuilder(nxopen.DisplayableObject) Default values. |
SurfaceContinuityAnalysisBuilder.CurvatureType
Curvature types
|
SurfaceContinuityAnalysisBuilder.Types
Two possible types for the dialog
|
SurfaceIntersectionBuilder
Represents a
SurfaceIntersection builder To create a new instance of this class, use AnalysisObjectCollection.createSurfaceIntersectionBuilder(nxopen.DisplayableObject) Default values. |
SurfaceIntersectionBuilder.CalculationTypes
Enumeration for needle calculation method
|
SurfaceIntersectionBuilder.DirectionTypes
Enumeration for needle direction type
|
SurfaceIntersectionBuilder.LabelValues
Enumeration for label computation method
|
SurfaceIntersectionBuilder.NormalTypes
Enumeration for face normal
|
SurfaceIntersectionBuilder.ProjectionTypes
Projection types
|
SurfaceIntersectionBuilder.ScalingTypes
Enumeration for needle display type
|
SurfaceIntersectionBuilder.XyzTypes
Enumeration for X, Y or Z projection plane
|
Class and Description |
---|
AnalysisObject
Represents an Analysis Object
This is an abstract class, and cannot be instantiated . |
Class and Description |
---|
AnalysisObject
Represents an Analysis Object
This is an abstract class, and cannot be instantiated . |
Copyright 2011 Siemens Product Lifecycle Management Software Inc. All Rights Reserved.