Package | Description |
---|---|
nxopen |
Provides classes and interfaces for the NX Open Common API.
|
nxopen.annotations |
Provides classes and interfaces relating to Dimensions, Notes, Symbols, PMI, and other Annotations.
|
nxopen.assemblies |
Provides classes and interfaces for Assemblies.
|
nxopen.drafting |
Provides classes and interfaces for the Drafting.
|
nxopen.drawings |
Provides classes and interfaces for Drafting Drawings.
|
nxopen.weld |
Provides classes and interfaces for Weld.
|
Class and Description |
---|
BordersAndZonesCollection
Represents a collection of
BordersAndZones objects To obtain an instance of this class, refer to nxopen.draftingManager Created in NX8.0.0 |
DraftingCurveInfo
Represents Drafting Curve Info .
|
DraftingViewCollection
Represents a collection of
DraftingView s. |
DrawingCompareSettingsBuilder
Represents a
DrawingCompareSettingsBuilder builder To create a new instance of this class, use DrawingCompareManager.createDrawingCompareSettingsBuilder() Default values. |
MarkAsTemplateBuilder
Represents a
MarkAsTemplateBuilder
To create a new instance of this class, use nxopen.draftingManager#createMarkAsTemplateBuilder Created in NX8.0.0 |
SectionLineCollection
Represents a collection of
SectionLine s. |
SheetZoneReferenceBuilder
builder for creating sheet zone refernce control strings based on the selected attribute and view
To create a new instance of this class, use nxopen.draftingManager#createSheetZoneReferenceBuilder Created in NX8.0.0 |
ViewAlignmentCollection
Represents a collection of
ViewAlignment s. |
Class and Description |
---|
DraftingView
Represents a drafting view.
|
SelectDraftingView
Represents a single object selection.
|
SelectDraftingViewList
Represents a list of objects on a selection list.
|
ViewProjectedArrowSettingsBuilder |
Class and Description |
---|
SelectDraftingViewList
Represents a list of objects on a selection list.
|
Class and Description |
---|
AutomationBookletBuilder |
AutomationTemplateRegionBuilder |
BorderAndZoneStyleBuilder
Represents the Border and Zone Style Builder which manages all the style attributes related
to sheet borders, sheet margins and sheet zones.
|
DrawingRegionCollection
Represents a collection of drawing regions
Use nxopen.drawings to get the instance of this class. |
EditSectionLineSettingsBuilder
Represents a
EditSectionLineSettingsBuilder builder. |
EditViewLabelSettingsBuilder
Represents a
EditViewLabelSettingsBuilder builder. |
EditViewSettingsBuilder
Represents a
EditViewSettingsBuilder builder. |
GeneralWorkFlowBuilder |
SectionLine
Represents a Section Line.
|
SelectDraftingView
Represents a single object selection.
|
SelectDraftingViewList
Represents a list of objects on a selection list.
|
View2dOrientBuilder
Represents the View 2D Orientation (Drawings.View2dOrientBuilder)
Created in NX6.0.0 |
ViewBreakBuilder
Represents a
ViewBreakBuilder This is a sub-builder class and cannot be directly instantiated Created in NX9.0.0 |
ViewCommonViewLabelBuilder |
ViewDetailLabelBuilder |
ViewLabelBuilder |
ViewProjectedLabelBuilder |
ViewScaleBuilder
Represents the View Scale (Drawings.ViewScaleBuilder)
Created in NX6.0.0 |
ViewSectionLabelBuilder |
ViewSectionLineBuilder |
ViewStyleBuilder
Represents the View Style Builder (Drawings.ViewStyleBuilder) which manages all the style attributes related
to the view including base view, projected view, drawing view, detail view, broken view, section view etc.
|
ViewWorkflowBuilder |
Class and Description |
---|
AddObjectsToRegionBuilder
Creates the builder for associating the symbols from library to the region
To create a new instance of this class, use DrawingRegionCollection.createAddObjectsToRegionBuilder() Created in NX8.0.0 |
AddRemoveBoxViewBuilder
This class is used to construct the add remove box view Builder
To create a new instance of this class, use DraftingViewCollection.createAddRemoveBoxViewBuilder(nxopen.drawings.DraftingView) Created in NX8.0.0 |
AddRemoveBoxViewBuilder.ModeType
Mode type
|
ArrowDirectionType
the arrow direction type
|
ArrowStyleType
the arrow style type
|
BaseHalfSectionLine
Represents a Base Half Section Line.
|
BasePointToPointSectionLine
Represents a Base Point to Point Section Line.
|
BaseSteppedSectionLine
Represents a Base Stepped Section Line.
|
BaseView
Represents a Base View.
|
BaseViewBuilder
Represents a
BaseView builder To create a new instance of this class, use DraftingViewCollection.createBaseViewBuilder(nxopen.drawings.BaseView) Default values. |
BaseViewStyle
Represents set of Base View Style Preferences applicable to drafting views.
|
BorderAndZoneStyleBuilder
Represents the Border and Zone Style Builder which manages all the style attributes related
to sheet borders, sheet margins and sheet zones.
|
BordersAndZones
Represents Borders and Zones
To create or edit an instance of this class, use BordersAndZonesBuilder Created in NX8.0.0 |
BordersAndZonesBuilder
Builder for creating Borders and Zones.
|
BordersAndZonesBuilder.FontEnum
Deprecated.
Deprecated in NX10.0.0. Use
FontEnum instead.
|
BordersAndZonesBuilder.HorizontalCenteringMarkType
Deprecated.
Deprecated in NX10.0.0. Use
HorizontalCenteringMarkType instead.
|
BordersAndZonesBuilder.VerticalCenteringMarkType
Deprecated.
Deprecated in NX10.0.0. Use
VerticalCenteringMarkType instead.
|
BordersAndZonesBuilder.ZoneMethod
Deprecated.
Deprecated in NX10.0.0. Use
Method instead.
|
BordersAndZonesBuilder.ZoneOrigin
Deprecated.
Deprecated in NX10.0.0. Use
ZoneOrigin instead.
|
BrokenViewBuilder
This class is used to construct the broken view Builder
To create a new instance of this class, use DraftingViewCollection.createBrokenViewBuilder(nxopen.drawings.ViewBreak) Default values. |
BrokenViewBuilder.BreakLineStyle
Break Line Type
|
BrokenViewBuilder.HorizontalBreakSide
Which side to remove in case of vertical single-sided break.
|
BrokenViewBuilder.LineWidth
Line Width
|
BrokenViewBuilder.TypeBreak
Specifies whether the break is two-sided (regular) or one-sided.
|
BrokenViewBuilder.TypeDirection
Direction Enum
|
BrokenViewBuilder.VerticalBreakSide
Which side to remove in case of horizontal single-sided break.
|
CustomViewSettingsBuilder
this class represents the "this class represents Drawings.CustomViewSettingsBuilder..
|
CustomViewSettingsBuilder.Features
the options for small features
|
CustomViewSettingsBuilder.Font
the options for all the fonts used in the custom view settings dialog
|
CustomViewSettingsBuilder.Interfering
the options for interfering curves
|
CustomViewSettingsBuilder.ThreadStandards
the thread standards options
|
CustomViewSettingsBuilder.Width
the width options for all the line width used in the customize view settings dialog
|
DetailView
Represents a Detail View.
|
DetailViewBuilder
Represents a
DetailView . |
DetailViewBuilder.LabelOnParentType
the display type for the label on parent
|
DetailViewBuilder.Types
the type of boundary
|
DraftingBody
Represents a drafting body.
|
DraftingBodyCollection
Represents a collection of
DraftingBody s. |
DraftingCurve
Represents a Drafting VD Curve.
|
DraftingCurveCollection
Represents a collection of
DraftingCurve s. |
DraftingCurveInfo.DraftingCurveType
Specifies the drafting curve types
|
DraftingView
Represents a drafting view.
|
DraftingViewCollection.ViewCopyAnnotOption
Specifies the the annotation copy mode.
|
DraftingViewCollection.ViewCopyDetailOption
Specifies the the view copy mode.
|
DraftingViewCollection.ViewUpdateOption
Specifies which drafting views to update.
|
DrawingCompareSettingsBuilder.ChangeSymbolType
Represents a Compare Settings Change symbol Types
|
DrawingCompareSettingsBuilder.ComparisonBaseline
Represents a Compare Settings ComparisonBaseline
|
DrawingCompareSettingsBuilder.FontType
Represents a Compare Settings Change symbol font types
|
DrawingCompareSettingsBuilder.WidthType
Represents a Compare Settings Change symbol width types
|
DrawingRegion
Represents a Drawing Region
To create or edit an instance of this class, use DrawingRegionBuilder Created in NX8.0.0 |
DrawingRegionBuilder
Represents a Drawing Region Builder
To create a new instance of this class, use DrawingRegionCollection.createDrawingRegionBuilder(nxopen.drawings.DrawingRegion) Default values. |
DrawingRegionBuilder.ContentToMove
Specifies the region content to move
|
DrawingRegionBuilder.RegionContinuation
Specifies the region continuation type
|
DrawingRegionBuilder.RegionDraftingObjectType
Specifies the drafting object type
|
DrawingRegionBuilder.RegionGrowthDirection
Specifies the region growth direction (this is for
CustomSymbol and Note ) |
DrawingRegionBuilder.RegionHorizontalGrowthDirection
Specifies the region horizontal growth direction
|
DrawingRegionBuilder.RegionVerticalGrowthDirection
Specifies the region vertical growth direction
|
DrawingRegionRulesBuilder
Represents a Drawing region rules builder .
|
DrawingView
Drawing View - an empty view created without any geometric objects.
|
DrawingViewBuilder
This builder allows the user to create a Drawing View
To create a new instance of this class, use DraftingViewCollection.createDrawingViewBuilder(nxopen.drawings.DrawingView) Default values. |
FlatPatternObject
Provides an interface to the data available for flat pattern objects on drawing
views.
|
FlatPatternObject.DirectionsData
This class holds the data returned from
FlatPatternObject.getDirections() |
FlatPatternViewStyle
Provides access to object and callout properties for sheet-metal data in
flat pattern views on drawings.
|
FontEnum
the font
|
GeneralViewStyle
Represents set of General View Styles Preferences applicable to drafting views.
|
GeneralWorkFlowBuilder.GridSettingsType
Represents the grid settings type.
|
GeneralWorkFlowBuilder.ModelBasedAlwaysStartType
Represents the always start type.
|
GeneralWorkFlowBuilder.SettingsOrientationType
Represents the settings orientation type.
|
HalfSectionLine
Half Section Line is used to create a view with half of the part
sectioned and the other half un-sectioned.
|
HalfSectionLineBuilder
Deprecated.
Deprecated in NX10.0.0. Use
Drawings.SectionViewBuilder#sectionViewType instead.
|
HiddenLinesViewStyle
Represents set of Hidden Lines View Style Preferences applicable to drafting views.
|
HiddenObjectsBuilder
This builder allows the user to select a view in which
component objects can be designated as hidden or shown .
|
HingeLineBuilder
Represents a Drawings.HingeLineBuilder.
|
HingeLineBuilder.Hingeline
Specifies the hinge line vector option
|
HorizontalCenteringMarkType
the horizontal centering mark type
|
InheritPmiViewStyle
Represents set of InheritPmiViewStyle applicable to drafting views.
|
LabelPositionTypes
label position type
|
LetterFormatTypes
letter format type
|
MarkAsTemplateBuilder.ActionTypeEnum
the action type enum.
|
MarkAsTemplateBuilder.ItemTypeEnum
the item type enum.
|
MarkAsTemplateBuilder.RelationTypeEnum
the relation type enum.
|
MarkAsTemplateBuilder.TemplateTypeEnum
the template type enum.
|
Method
the zone method
|
MultipleViewPlacementBuilder
This builder allows the user to create a Multiple View Placement .
|
MultipleViewPlacementBuilder.Option
The placement option type
|
OrientationViewStyle
Represents set of Orientation View Style Preferences applicable to drafting views.
|
OrientedSectionLineBuilder
Deprecated.
Deprecated in NX10.0.0. This API is not supported yet and should not be used.
|
OvtBuilder |
ParentViewBuilder
Represents a
ParentViewBuilder . |
PerspectiveViewStyle
Represents set of PerspectiveViewStyle applicable to drafting views.
|
PointAndAngleSectionLineBuilder
Deprecated.
Deprecated in NX10.0.0. This API is not supported yet and should not be used.
|
PointToPointSectionLineBuilder
Deprecated.
Deprecated in NX10.0.0. Use
Drawings.SectionViewBuilder#sectionViewType instead.
|
ProjectedView
Represents a Projected View.
|
ProjectedViewBuilder
Represents a
ProjectedView builder To create a new instance of this class, use DraftingViewCollection.createProjectedViewBuilder(nxopen.drawings.ProjectedView) Default values. |
ProjectedViewOrientationBuilder |
ProjectedViewStyle
Represents set of Projected View Style Preferences applicable to drafting views.
|
ReferenceShowTypes
reference show type
|
RefineDisplayBuilder
Represents a
RefineDisplayBuilder . |
RemoveObjectsBuilder
Creates the builder for removing associated objects from the region
To create a new instance of this class, use DrawingRegionCollection.createRemoveObjectsBuilder() Created in NX8.0.0 |
RenderSet
Represents a RenderSet.
|
RevolvedSectionLineBuilder
Deprecated.
Deprecated in NX10.0.0. Use
Drawings.SectionViewBuilder#sectionViewType instead.
|
ScalePositionTypes
scale Position type
|
ScaleValueFormatTypes
scale value format type
|
SectionInViewBuilder
This builder allows the user to select a view in which component or
solid body objects can be designated as section, non-sectioned, or neither
To create a new instance of this class, use DraftingViewCollection.createSectionInViewBuilder() Default values. |
SectionInViewBuilder.EditSxtype
Edit Section type
|
SectionLine
Represents a Section Line.
|
SectionLineBuilder
Deprecated.
Deprecated in NX10.0.0. Use
nxopen.drawings.SectionViewBuilder#sectionLineType
|
SectionLineBuilder.Types
Deprecated.
Section Line type
|
SectionLineSegmentBuilder
Represents a
SectionLineSegmentBuilder . |
SectionLineSegmentBuilder.Types
the point
|
SectionLineSegmentBuilderList
Represents a list of objects.
|
SectionLineSegmentPointBuilder
Represents Section Line Segment Point Builder
To create a new instance of this class, use SectionLineSegmentPointListBuilder.createSectionLineSegmentPointBuilder() Created in NX10.0.0 |
SectionLineSegmentPointBuilder.SegmentTypes
Section Segment Types
|
SectionLineSegmentPointListBuilder
Represents SectionLineSegmentPointListBuilder class.
|
SectionLineSegmentsBuilder
Represents a class Drawings.SectionLineSegmentsBuilder.
|
SectionLineSettingsBuilder
Represents the Section Line Settings Builder (Drawings.SectionLineSettingsBuilder) which manages all the style attributes related
to the section Line including label letter.
|
SectionLineStyleBuilder
Represents a Drawings.SectionLineStyleBuiler.
|
SectionLineStyleBuilder.ArrowheadStyleType
Deprecated.
Deprecated in NX10.0.0. Use
nxopen.drawings.ViewSectionLineBuilder#styleType instead.
|
SectionLineStyleBuilder.CreateSectionLineType
Deprecated.
Deprecated in NX10.0.0. Use
nxopen.drawings.ViewSectionLineBuilder#showSectionLineType instead.
|
SectionLineStyleBuilder.FontStyle
Deprecated.
Deprecated in NX10.0.0. This API is not supported yet and should not be used.
|
SectionLineStyleBuilder.LabelLocationStyle
Deprecated.
Deprecated in NX10.0.0. Use
nxopen.drawings.ViewSectionLineBuilder#locationType instead.
|
SectionLineStyleBuilder.StandardStyle
Deprecated.
Deprecated in NX10.0.0. Use
nxopen.drawings.ViewSectionLineBuilder#displayType instead.
|
SectionLineStyleBuilder.WidthStyle
Deprecated.
Deprecated in NX10.0.0. This API is not supported yet and should not be used.
|
SectionViewBuilder
Represents a
SectionView builder To create a new instance of this class, use DraftingViewCollection.createSectionViewBuilder(nxopen.NXObject) Default values. |
SectionViewBuilder.SectionCutType
Section Line Cut type
|
SectionViewBuilder.SectionLineType
Section Line type
|
SectionViewBuilder.SectionViewModeType
Section Line Mode
|
SectionViewStyle
Represents set of Section View Style Preferences applicable to drafting views.
|
SelectDraftingView
Represents a single object selection.
|
SelectDraftingView.ValueData
This class holds the data returned from
SelectDraftingView.getValue() |
SelectDraftingView.ValueWithCaeSetObjectInfoData
This class holds the data returned from
SelectDraftingView.getValue() |
SelectDraftingView.ValueWithSnapData
This class holds the data returned from
SelectDraftingView.getValue() |
SelectDraftingViewList
Represents a list of objects on a selection list.
|
SelectDrawingRegion
Represents a single object selection.
|
SelectDrawingRegion.ValueData
This class holds the data returned from
SelectDrawingRegion.getValue() |
SelectDrawingRegion.ValueWithCaeSetObjectInfoData
This class holds the data returned from
SelectDrawingRegion.getValue() |
SelectDrawingRegion.ValueWithSnapData
This class holds the data returned from
SelectDrawingRegion.getValue() |
SelectDrawingView
Represents a single object selection.
|
SelectDrawingView.ValueData
This class holds the data returned from
SelectDrawingView.getValue() |
SelectDrawingView.ValueWithCaeSetObjectInfoData
This class holds the data returned from
SelectDrawingView.getValue() |
SelectDrawingView.ValueWithSnapData
This class holds the data returned from
SelectDrawingView.getValue() |
SelectDrawingViewList
Represents a list of objects on a selection list.
|
SelectModelViewBuilder
Represents a Select Model View builder that selects a model view
.
|
SelectRegionBuilder
Creates the builder for associating the objects from the screen
To create a new instance of this class, use DrawingRegionCollection.createSelectRegionBuilder() Created in NX8.0.0 |
SelectSectionLine
Represents a single object selection.
|
SelectSectionLine.ValueData
This class holds the data returned from
SelectSectionLine.getValue() |
SelectSectionLine.ValueWithCaeSetObjectInfoData
This class holds the data returned from
SelectSectionLine.getValue() |
SelectSectionLine.ValueWithSnapData
This class holds the data returned from
SelectSectionLine.getValue() |
ShadingViewStyle
Represents set of Shading View style applicable to drafting views.
|
SheetBorderSettingsBuilder
Represents a
SheetBorderSettingsBuilder . |
SheetMarginSettingsBuilder
Represents the Drawing Sheet Margins Style Builder.
|
SheetZoneSettingsBuilder
Represents the Drawing Sheet Zone Setting Style Builder.
|
ShipbuildingLinesViewStyle
Represents set of Shipbuilding Lines View Style applicable to drafting views.
|
ShipbuildingLinesViewStyle.Lines
Line type
|
ShipbuildingLinesViewStyle.ShipbuildingLines
Geometry type
|
ShipDraftingViewLinesBuilder
Represents a ship view lines block
To create a new instance of this class, use DraftingViewCollection.createShipDraftingViewLinesBuilder() Created in NX10.0.0 |
ShipDraftingViewLinesBuilderList
Represents a list of objects.
|
ShipDraftingViewLinesViewStyle
Represents set of Ship Drafting Lines View Style applicable to drafting views.
|
ShipDraftingViewLinesViewStyle.Lines
Line type
|
SketchSectionLineBuilder
Represents a
Drawings.SectionLine builder To create a new instance of this class, use SectionLineCollection.createSketchSectionLineBuilder(nxopen.drawings.SectionLine) Default values. |
SketchSectionLineBuilder.SectionLineTypes
Section line type
|
SmoothEdgesViewStyle
Represents set of Smooth Edges View Style Preferences applicable to drafting views.
|
SpecifySectionLineBuilder
Select a section line .
|
StandardViewsBuilder
This builder allows the user to create a Drawing View
To create a new instance of this class, use DraftingViewCollection.createStandardViewsBuilder() Default values. |
StandardViewsBuilder.Placement
The view Layout placement type (deprecated)
|
StandardViewsBuilder.Type
The view Layout type
|
StandardViewsBuilder.View
The view type to create
|
SteppedSectionLine
A Simple or Stepped Section Line.
|
SteppedSectionLineBuilder
Deprecated.
Deprecated in NX10.0.0. Use
Drawings.SectionViewBuilder#sectionViewType instead.
|
SvtBuilder |
ThreadsViewStyle
Represents set of Threads View Style Preferences applicable to drafting views.
|
TraceLinesViewStyle
Represents interface for Trace Lines View Style Preferences applicable to drafting views.
|
TrimmingMarkStyleType
the trimming mark style type
|
UpdateViewsBuilder
Represents a
UpdateViewsBuilder
To create a new instance of this class, use DraftingViewCollection.createUpdateViewsBuilder() Created in NX5.0.0 |
VerticalCenteringMarkType
the vertical centering mark type
|
View2dOrientBuilder
Represents the View 2D Orientation (Drawings.View2dOrientBuilder)
Created in NX6.0.0 |
View2dOrientBuilder.CustomMethod
The custom orientation method
|
View2dOrientBuilder.Type
The view orientation type
|
ViewAlignment
View Alignment object.
|
ViewAlignmentBuilder
Represents a
ViewAlignmentBuilder .This class is used to construct the view alignment Builder To create a new instance of this class, use ViewAlignmentCollection.createViewAlignmentBuilder() Default values. |
ViewBoundaryBuilder
Represents the View Boundary (Drawings.ViewBoundaryBuilder)
Created in NX6.0.0 |
ViewBoundaryBuilder.Type
The view boundary type
|
ViewBreak
ViewBreak - defines the portion of a view that gets hidden to
produce a broken view
To create or edit an instance of this class, use BrokenViewBuilder Created in NX7.5.0 |
ViewBreak.ViewBreakDisplayableObjectsAndOffsetsData
This class holds the data returned from
ViewBreak.getViewBreakDisplayableObjectsAndOffsets() |
ViewBreakBuilder.Viewbreaklinestyle
style for view break line
|
ViewBreakCollection
Represents a collection of
ViewBreak s. |
ViewCommonViewLabelBuilder |
ViewCommonViewLabelBuilder.SecondaryAlignmentType
secondary Alignment Type
|
ViewCommonViewLabelBuilder.SecondaryIndexingType
secondary Indexing Type
|
ViewCopyTo3dBuilder
Represents a
ViewCopyTo3dBuilder . |
ViewCopyTo3dBuilder.BoundingBoxOption
The bounding box options
|
ViewCopyTo3dBuilder.DistanceFromViewPlaneOption
The option to get the distance
|
ViewCopyTo3dBuilder.Option
Deprecated.
Deprecated in NX7.5.0. Please use
ViewCopyTo3dBuilder.DistanceFromViewPlaneOption instead.
|
ViewCopyTo3dBuilder.OutputOption
The output options
|
ViewCopyTo3dBuilder.Types
The type of copy to 3d selections
|
ViewCreationWizardBuilder
This builder allows the user to create a Drawing View
To create a new instance of this class, use DraftingViewCollection.createViewCreationWizardBuilder() Default values. |
ViewCreationWizardBuilder.Option
The placement option type
|
ViewCreationWizardBuilder.ResolutionOption
the view resolution option type
|
ViewCreationWizardBuilder.ViewBoundaryOption
The view boundary option type
|
ViewCreationWizardBuilder.ViewRepresentations
the view representation mode
|
ViewDetailLabelBuilder |
ViewDetailLabelBuilder.LabelParentDisplayTypes
Label on Parent Display type
|
ViewDetailLabelBuilder.LabelParentTextPlacement
Label on Parent Text Placement type
|
ViewLabelBuilder |
ViewLabelTypes
view label type
|
ViewOrientationBuilder
Represents a ViewOrientationBuilder.
|
ViewOrientationBuilder.Orientation
This enum represents view orientation type.
|
ViewPlacementBuilder
Represents a
ViewPlacementBuilder . |
ViewPlacementBuilder.Method
view method
|
ViewPlacementBuilder.Option
view option
|
ViewProjectedArrowSettingsBuilder |
ViewProjectedArrowSettingsBuilder.DimensionsStyleType
Represents arrowhead style
|
ViewProjectedArrowSettingsBuilder.DispalyLabelType
Represents display label type
|
ViewProjectedLabelBuilder |
ViewProjectedViewSettingsBuilder |
ViewProjectedViewSettingsBuilder.DisplayArrowOnParentViewType
Represents display arrow on parent view
|
ViewProjectionBuilder
Represents a
ViewProjectionBuilder . |
ViewProjectionBuilder.CurveType
the value of curve type in the setting group
|
ViewProjectionBuilder.Types
the type of view projection
|
ViewProjectionPlaneBuilder
Represents the View Projection Plane (Drawings.ViewProjectionPlaneBuilder)
Created in NX6.0.2 |
ViewProjectionPlaneBuilder.PlaneOptions
the plane options to select
|
ViewScaleBuilder
Represents the View Scale (Drawings.ViewScaleBuilder)
Created in NX6.0.0 |
ViewScaleBuilder.Type
The view scale type
|
ViewSectionLabelBuilder |
ViewSectionLineBuilder |
ViewSectionLineBuilder.DisplayType
specifies the section line symbol display
|
ViewSectionLineBuilder.LocationType
specifies the label location for ISO128 section lines.
|
ViewSectionLineBuilder.ShowSectionLineType
specifies the show section line options
|
ViewSectionLineBuilder.StyleType
specifies the section line arrowhead style
|
ViewStyle
Represents set of style applicable to drafting views.
|
ViewStyleBaseBuilder
Represents the BASE tab on the View Style Dialog (Drawings.ViewStyleBaseBuilder)
Created in NX6.0.0 |
ViewStyleBuilder
Represents the View Style Builder (Drawings.ViewStyleBuilder) which manages all the style attributes related
to the view including base view, projected view, drawing view, detail view, broken view, section view etc.
|
ViewStyleDetailBuilder
Represents the DETAIL tab on the View Style Dialog (Drawings.ViewStyleDetailBuilder)
Created in NX6.0.0 |
ViewStyleFPCalloutConfigBuilder
Represents the Callout section of the Flat Pattern tab on the View Style Dialog (Drawings.ViewStyleFPCalloutsBuilder)
Created in NX9.0.0 |
ViewStyleFPCalloutConfigBuilder.OrientationType
This enum represents orientation types for the flat pattern callouts
|
ViewStyleFPCalloutsBuilder
Represents the Callout section of the Flat Pattern tab on the View Style Dialog (Drawings.ViewStyleFPCalloutsBuilder)
Created in NX6.0.0 |
ViewStyleFPCurvesBuilder
Represents the Curve section of the Flat Pattern tab on the View Style Dialog (Drawings.ViewStyleFPCurvesBuilder)
Created in NX6.0.0 |
ViewStyleGeneralBuilder
Represents view style general builder (Drawings.ViewStyleGeneralBuilder) which manages all the general
attributes which are necessary for all the views.
|
ViewStyleHiddenLinesBuilder
Represents the HIDDEN LINES tab on the View Style Dialog (Drawings.ViewStyleHiddenLinesBuilder)
Created in NX6.0.0 |
ViewStyleInheritPmiBuilder
Represents the INHERIT PMI tab on the View Style Dialog (Drawings.ViewStyleInheritPmiBuilder)
Created in NX6.0.0 |
ViewStyleOrientationBuilder
Represents the ORIENTATION tab on the View Style Dialog (Drawings.ViewStyleOrientationBuilder)
Created in NX6.0.0 |
ViewStylePerspectiveBuilder
Represents the PERSPECTIVE tab on the View Style Dialog (Drawings.ViewStylePerspectiveBuilder)
Created in NX6.0.0 |
ViewStyleProjectedBuilder
Represents the PROJECTED tab on the View Style Dialog (Drawings.ViewStyleProjectedBuilder)
Created in NX6.0.0 |
ViewStyleSectionBuilder
Represents the SECTION tab on the View Style Dialog (Drawings.ViewStyleSectionBuilder)
Created in NX6.0.0 |
ViewStyleSectionConstraintsBuilder
Represents the SECTION CONSTRAINTS tab on the View Style Dialog (Drawings.ViewStyleSectionConstraintsBuilder)
Created in NX6.0.0 |
ViewStyleShadingBuilder
Represents the SHADING tab on the View Style Dialog (Drawings.ViewStyleShadingBuilder)
Created in NX6.0.0 |
ViewStyleShipbuildingLinesBuilder
Represents the Shipbuilding LINES tab on the View Style Dialog (Drawings.ViewStyleShipbuildingLinesBuilder)
To create a new instance of this class, use DraftingViewCollection.createShipbuildingLineBuilder() Created in NX8.0.0 |
ViewStyleShipbuildingLinesBuilderList
Represents a list of objects.
|
ViewStyleSmoothEdgesBuilder
Represents the SMOOTH EDGES tab on the View Style Dialog (Drawings.ViewStyleSmoothEdgesBuilder)
Created in NX6.0.0 |
ViewStyleThreadsBuilder
Represents the THREADS tab on the View Style Dialog (Drawings.ViewStyleThreadsBuilder)
Created in NX6.0.0 |
ViewStyleTraceLinesBuilder
Represents the TRACE LINES tab on the View Style Dialog (Drawings.ViewStyleTraceLinesBuilder)
Created in NX6.0.0 |
ViewStyleVirtualIntersectionsBuilder
Represents the VIRTUAL INTERSECTIONS tab on the View Style Dialog (Drawings.ViewStyleVirtualIntersectionsBuilder)
Created in NX6.0.0 |
ViewStyleVisibleLinesBuilder
Represents the VISIBLE LINES tab on the View Style Dialog (Drawings.ViewStyleVisibleLinesBuilder)
Created in NX6.0.0 |
ViewWorkflowBuilder.Display
Represents the extracted edge face display option
|
ViewWorkflowBuilder.Handlingbodies
Deprecated.
Deprecated in NX9.0.3. Use
ViewWorkflowBuilder.HandlingBodiesType instead.
|
ViewWorkflowBuilder.HandlingBodiesType
Represents option for handling bodies with no valid lightweight data
|
ViewWorkflowBuilder.Style
Represents the preview stle option
|
VirtualIntersectionsViewStyle
Represents set of Virtual Intersections View Style Preferences applicable to drafting views.
|
VisibleLinesViewStyle
Represents set of Visible Lines View Style Preferences applicable to drafting views.
|
ZoneOrigin
the zone origin
|
Class and Description |
---|
SelectDraftingViewList
Represents a list of objects on a selection list.
|
Copyright 2011 Siemens Product Lifecycle Management Software Inc. All Rights Reserved.