nxopen.die

Interface SteelInsertSegmentChildBuilder

public interface SteelInsertSegmentChildBuilder

Represents a Steel Insert Segment Child sub feature.
This sub feature is created via the main feature builder.

Created in NX4.0.0

Nested Class Summary

Nested Classes

Modifier and Type	Interface and Description
static class	SteelInsertSegmentChildBuilder.ExtensionTypeOption Settings for the extension type.
static class	SteelInsertSegmentChildBuilder.InsertTypeOption Settings for the insert type.

Method Summary

Modifier and Type	Method and Description
Expression	beltThickness() Returns the belt thickness License requirements: ug_die_design ("Die Design") .
DieBuildStatusOption	buildStatus() Returns the build status of die sisegs License requirements: ug_die_design ("Die Design") .
boolean	designStatus() Returns the design status of die sisegs License requirements: ug_die_design ("Die Design") .
boolean	displayStatus() Returns the display status of die sisegs License requirements: ug_die_design ("Die Design") .
Expression	extensionDistance() Returns the extension distance License requirements: ug_die_design ("Die Design") .
SteelInsertSegmentChildBuilder.ExtensionTypeOption	extensionType() Returns the extension type License requirements: ug_die_design ("Die Design") .
SteelInsertSegmentChildBuilder.InsertTypeOption	insertType() Returns the insert type License requirements: ug_die_design ("Die Design") .
Expression	profileRelief() Returns the profile relief License requirements: ug_die_design ("Die Design") .
boolean	profileReliefToggle() Returns the profile relief toggle License requirements: ug_die_design ("Die Design") .
Expression	reliefAngle() Returns the relief angle License requirements: ug_die_design ("Die Design") .
nxopen.Direction	segDirection() Returns the steel insert seg directions License requirements: ug_die_design ("Die Design") .
IOrientation	segPoint() Returns the steel insert seg point or plane License requirements: ug_die_design ("Die Design") .
void	setBeltThickness(String beltThickness) License requirements: ug_die_design ("Die Design") .
void	setDesignStatus(boolean designStatus) Sets the design status of die sisegs License requirements: ug_die_design ("Die Design") .
void	setDisplayStatus(boolean displayStatus) Sets the display status of die sisegs License requirements: ug_die_design ("Die Design") .
void	setExtensionDistance(String extensionDistance) License requirements: ug_die_design ("Die Design") .
void	setExtensionType(SteelInsertSegmentChildBuilder.ExtensionTypeOption extensionType) Sets the extension type License requirements: ug_die_design ("Die Design") .
void	setInsertType(SteelInsertSegmentChildBuilder.InsertTypeOption insertType) Sets the insert type License requirements: ug_die_design ("Die Design") .
void	setProfileRelief(String profileRelief) License requirements: ug_die_design ("Die Design") .
void	setProfileReliefToggle(boolean profileReliefToggle) Sets the profile relief toggle License requirements: ug_die_design ("Die Design") .
void	setReliefAngle(String reliefAngle) License requirements: ug_die_design ("Die Design") .
void	setSegDirection(nxopen.Direction segDirection) Sets the steel insert seg directions License requirements: ug_die_design ("Die Design") .
void	setSegPoint(IOrientation segPoint) Sets the steel insert seg point or plane License requirements: ug_die_design ("Die Design") .

Method Detail

setSegPoint

void setSegPoint(IOrientation segPoint)
          throws NXException,
                 RemoteException

Sets the steel insert seg point or plane
License requirements: ug_die_design ("Die Design")
.
Created in NX4.0.0

Parameters:

segPoint - seg end point or plane

Throws:

NXException

RemoteException

segPoint

IOrientation segPoint()
               throws NXException,
                      RemoteException

Returns the steel insert seg point or plane
License requirements: ug_die_design ("Die Design")
.
Created in NX4.0.0

Returns:

seg end point or plane

Throws:

NXException

RemoteException

setSegDirection

void setSegDirection(nxopen.Direction segDirection)
              throws NXException,
                     RemoteException

Sets the steel insert seg directions
License requirements: ug_die_design ("Die Design")
.
Created in NX4.0.0

Parameters:

segDirection - seg direction

Throws:

NXException

RemoteException

segDirection

nxopen.Direction segDirection()
                       throws NXException,
                              RemoteException

Returns the steel insert seg directions
License requirements: ug_die_design ("Die Design")
.
Created in NX4.0.0

Returns:

seg direction

Throws:

NXException

RemoteException

setBeltThickness

void setBeltThickness(String beltThickness)
               throws NXException,
                      RemoteException

License requirements: ug_die_design ("Die Design")
.
Created in NX4.0.0

Parameters:

beltThickness -
NOTE: The full Unicode character set is not supported for this parameter.

Throws:

NXException

RemoteException

beltThickness

Expression beltThickness()
                  throws NXException,
                         RemoteException

Returns the belt thickness
License requirements: ug_die_design ("Die Design")
.
Created in NX4.0.0

Throws:

NXException

RemoteException

setReliefAngle

void setReliefAngle(String reliefAngle)
             throws NXException,
                    RemoteException

License requirements: ug_die_design ("Die Design")
.
Created in NX4.0.0

Parameters:

reliefAngle -
NOTE: The full Unicode character set is not supported for this parameter.

Throws:

NXException

RemoteException

reliefAngle

Expression reliefAngle()
                throws NXException,
                       RemoteException

Returns the relief angle
License requirements: ug_die_design ("Die Design")
.
Created in NX4.0.0

Throws:

NXException

RemoteException

setProfileRelief

void setProfileRelief(String profileRelief)
               throws NXException,
                      RemoteException

License requirements: ug_die_design ("Die Design")
.
Created in NX4.0.0

Parameters:

profileRelief -
NOTE: The full Unicode character set is not supported for this parameter.

Throws:

NXException

RemoteException

profileRelief

Expression profileRelief()
                  throws NXException,
                         RemoteException

Returns the profile relief
License requirements: ug_die_design ("Die Design")
.
Created in NX4.0.0

Throws:

NXException

RemoteException

setExtensionDistance

void setExtensionDistance(String extensionDistance)
                   throws NXException,
                          RemoteException

License requirements: ug_die_design ("Die Design")
.
Created in NX4.0.0

Parameters:

extensionDistance -
NOTE: The full Unicode character set is not supported for this parameter.

Throws:

NXException

RemoteException

extensionDistance

Expression extensionDistance()
                      throws NXException,
                             RemoteException

Returns the extension distance
License requirements: ug_die_design ("Die Design")
.
Created in NX4.0.0

Throws:

NXException

RemoteException

setInsertType

void setInsertType(SteelInsertSegmentChildBuilder.InsertTypeOption insertType)
            throws NXException,
                   RemoteException

Sets the insert type
License requirements: ug_die_design ("Die Design")
.
Created in NX4.0.0

Parameters:

insertType -

Throws:

NXException

RemoteException

insertType

SteelInsertSegmentChildBuilder.InsertTypeOption insertType()
                                                    throws NXException,
                                                           RemoteException

Returns the insert type
License requirements: ug_die_design ("Die Design")
.
Created in NX4.0.0

Throws:

NXException

RemoteException

setExtensionType

void setExtensionType(SteelInsertSegmentChildBuilder.ExtensionTypeOption extensionType)
               throws NXException,
                      RemoteException

Sets the extension type
License requirements: ug_die_design ("Die Design")
.
Created in NX4.0.0

Parameters:

extensionType -

Throws:

NXException

RemoteException

extensionType

SteelInsertSegmentChildBuilder.ExtensionTypeOption extensionType()
                                                          throws NXException,
                                                                 RemoteException

Returns the extension type
License requirements: ug_die_design ("Die Design")
.
Created in NX4.0.0

Throws:

NXException

RemoteException

setProfileReliefToggle

void setProfileReliefToggle(boolean profileReliefToggle)
                     throws NXException,
                            RemoteException

Sets the profile relief toggle
License requirements: ug_die_design ("Die Design")
.
Created in NX4.0.0

Parameters:

profileReliefToggle -

Throws:

NXException

RemoteException

profileReliefToggle

boolean profileReliefToggle()
                     throws NXException,
                            RemoteException

Returns the profile relief toggle
License requirements: ug_die_design ("Die Design")
.
Created in NX4.0.0

Throws:

NXException

RemoteException

setDesignStatus

void setDesignStatus(boolean designStatus)
              throws NXException,
                     RemoteException

Sets the design status of die sisegs
License requirements: ug_die_design ("Die Design")
.
Created in NX4.0.0

Parameters:

designStatus -

Throws:

NXException

RemoteException

designStatus

boolean designStatus()
              throws NXException,
                     RemoteException

Returns the design status of die sisegs
License requirements: ug_die_design ("Die Design")
.
Created in NX4.0.0

Throws:

NXException

RemoteException

buildStatus

DieBuildStatusOption buildStatus()
                          throws NXException,
                                 RemoteException

Returns the build status of die sisegs
License requirements: ug_die_design ("Die Design")
.
Created in NX4.0.0

Throws:

NXException

RemoteException

setDisplayStatus

void setDisplayStatus(boolean displayStatus)
               throws NXException,
                      RemoteException

Sets the display status of die sisegs
License requirements: ug_die_design ("Die Design")
.
Created in NX4.0.0

Parameters:

displayStatus -

Throws:

NXException

RemoteException

displayStatus

boolean displayStatus()
               throws NXException,
                      RemoteException

Returns the display status of die sisegs
License requirements: ug_die_design ("Die Design")
.
Created in NX4.0.0

Throws:

NXException

RemoteException