Package | Description |
---|---|
nxopen |
Provides classes and interfaces for the NX Open Common API.
|
Modifier and Type | Field and Description |
---|---|
static Sketch.AlternateSolutionOption |
Sketch.AlternateSolutionOption.FALSE
Use the regular solution
|
static Sketch.AlternateSolutionOption |
Sketch.AlternateSolutionOption.TRUE
Use the alternate solution
|
Modifier and Type | Method and Description |
---|---|
static Sketch.AlternateSolutionOption |
Sketch.AlternateSolutionOption.valueOf(int value)
Returns the enum constant of the specified enum type with the specified value.
|
static Sketch.AlternateSolutionOption |
Sketch.AlternateSolutionOption.valueOf(String name)
Returns the enum constant of the specified enum type with the specified name.
|
static Sketch.AlternateSolutionOption[] |
Sketch.AlternateSolutionOption.values()
Returns an array that contains the values for this enum.
|
Modifier and Type | Method and Description |
---|---|
Sketch.FilletData |
Sketch.fillet(Curve curve1,
Curve curve2,
Curve curve3,
Point3d helpPoint1,
Point3d helpPoint2,
Point3d helpPoint3,
double radius,
Sketch.TrimInputOption doTrim,
Sketch.DeleteThirdCurveOption doDelete,
Sketch.CreateDimensionOption createRadiusDim,
Sketch.AlternateSolutionOption alternateSolution)
Fillets curves and creates appropriate constraints.
|
Sketch.FilletData |
Sketch.fillet(Curve curve1,
Curve curve2,
Curve curve3,
Point3d helpPoint1,
Point3d helpPoint2,
Point3d helpPoint3,
Point3d pointOnArc,
double radius,
Sketch.TrimInputOption doTrim,
Sketch.DeleteThirdCurveOption doDelete,
Sketch.CreateDimensionOption createRadiusDim,
Sketch.AlternateSolutionOption alternateSolution)
Fillets curves and creates appropriate constraints.
|
Sketch.FilletData |
Sketch.fillet(Curve curve1,
Curve curve2,
Point3d helpPoint1,
Point3d helpPoint2,
double radius,
Sketch.TrimInputOption doTrim,
Sketch.CreateDimensionOption createRadiusDim,
Sketch.AlternateSolutionOption alternateSolution)
Fillets curves and creates appropriate constraints.
|
Sketch.FilletData |
Sketch.fillet(Curve curve1,
Curve curve2,
Point3d helpPoint1,
Point3d helpPoint2,
Point3d pointOnArc,
double radius,
Sketch.TrimInputOption doTrim,
Sketch.CreateDimensionOption createRadiusDim,
Sketch.AlternateSolutionOption alternateSolution)
Fillets curves and creates appropriate constraints.
|
Copyright 2011 Siemens Product Lifecycle Management Software Inc. All Rights Reserved.