Package | Description |
---|---|
nxopen |
Provides classes and interfaces for the NX Open Common API.
|
nxopen.annotations |
Provides classes and interfaces relating to Dimensions, Notes, Symbols, PMI, and other Annotations.
|
nxopen.bodydes |
Provides classes and interfaces for Body Design.
|
nxopen.cae |
Provides classes and interfaces relating to Advanced Simulation and Design Simulation.
|
nxopen.cae.optimization |
Provides classes and interfaces relating to Optimization.
|
nxopen.cam |
Provides classes and interfaces for Manufacturing.
|
nxopen.die |
Provides classes and interfaces relating to Die Engineering and Die Design.
|
nxopen.display |
Provides classes and interfaces for display.
|
nxopen.drafting |
Provides classes and interfaces for the Drafting.
|
nxopen.drawings |
Provides classes and interfaces for Drafting Drawings.
|
nxopen.facet |
Provides classes and interfaces for Faceted Representations.
|
nxopen.features |
Provides classes and interfaces for features.
|
nxopen.features.sheetmetal |
Provides classes and interfaces for Sheet Metal Features.
|
nxopen.features.shipdesign |
Provides classes and interfaces for Ship Design.
|
nxopen.features.subdivision |
Provides classes and interfaces for Manufacturing.
|
nxopen.features.vehicledesign |
Provides classes and interfaces for the Vehicle Design.
|
nxopen.fields |
Provides classes and interfaces for Fields.
|
nxopen.formboard |
Provides interfaces and classes to the Routing Electrical Formboard functionality.
|
nxopen.geometricanalysis |
Provides classes and interfaces for Geometric Analysis.
|
nxopen.geometricanalysis.sectionanalysis |
Provides classes and interfaces for Section Analysis.
|
nxopen.geometricutilities |
Provides classes and interfaces for Geometric Utilities.
|
nxopen.layout2d |
Provides classes and interfaces for Manufacturing.
|
nxopen.mechatronics |
Provides classes and interfaces for Mechatronics.
|
nxopen.motion |
Provides classes and interfaces for Motion Simulation.
|
nxopen.routing |
Provides classes and interfaces for Routing.
|
nxopen.routing.electrical |
Provides classes and interfaces for Routing Electrical.
|
nxopen.tooling |
Provides classes and interfaces for Tooling.
|
nxopen.weld |
Provides classes and interfaces for Weld.
|
Modifier and Type | Field and Description |
---|---|
Point |
SelectPoint.ValueData.selection
selected object
|
Point |
SelectPoint.ValueWithCaeSetObjectInfoData.selection
selected object
|
Point |
SelectPoint.ValueWithSnapData.selection1
first selected object
|
Point |
SelectPoint.ValueWithSnapData.selection2
second selected object
|
Modifier and Type | Method and Description |
---|---|
Point |
MeasureAngleBuilder.baseEnd()
Returns the end point
License requirements: solid_modeling ("SOLIDS MODELING") . |
Point |
MeasureAngleBuilder.basePoint()
Returns the base point
License requirements: solid_modeling ("SOLIDS MODELING") . |
Point |
SketchPolygonBuilder.centerPoint()
Returns the center point
License requirements: None. |
Point |
SketchEllipseBuilder.centerPoint()
Returns the center point
License requirements: None. |
Point |
SketchConicBuilder.controlPoint()
Returns the control point
License requirements: None. |
Point |
PointCollection.createPoint(CAEFace face,
Point projectedPoint,
SmartObject.UpdateOption updateOption)
Creates a point by projecting onto a face.
|
Point |
PointCollection.createPoint(CartesianCoordinateSystem csys,
Scalar scalarX,
Scalar scalarY,
Scalar scalarZ,
SmartObject.UpdateOption updateOption)
|
Point |
PointCollection.createPoint(Expression exp,
SmartObject.UpdateOption updateOption)
Creates a
Point via an Expression . |
Point |
PointCollection.createPoint(IBaseCurve curve1,
IBaseCurve curve2,
Point3d startPoint,
View view,
SmartObject.UpdateOption updateOption)
Creates a
Point at the apparent intersection of two Edges or Curves in a view. |
Point |
PointCollection.createPoint(IBaseCurve curve1,
IBaseCurve curve2,
Point helpPt1,
Point helpPt2,
SmartObject.UpdateOption updateOption)
Creates a
Point at the intersection of two Edges or Curves. |
Point |
PointCollection.createPoint(IBaseCurve edgeCurve,
Point pointOffset,
Scalar distancePercent,
PointCollection.AlongCurveOption option,
Sense sense,
SmartObject.UpdateOption updateOption)
|
Point |
PointCollection.createPoint(IBaseCurve edgeCurve,
Scalar scalarT,
PointCollection.PointOnCurveLocationOption locationOption,
SmartObject.UpdateOption updateOption)
|
Point |
PointCollection.createPoint(IBaseCurve edgeCurve,
Scalar scalarT,
SmartObject.UpdateOption updateOption)
|
Point |
PointCollection.createPoint(IBaseCurve edgeCurve,
Scalar scalarT,
SmartObject.UpdateOption updateOption,
boolean useReverseParameter)
|
Point |
PointCollection.createPoint(IBaseCurve edgeCurve,
Scalar angle,
Xform xform,
SmartObject.UpdateOption updateOption)
Creates a
Point at an angle along an IBaseCurve . |
Point |
PointCollection.createPoint(IBaseCurve edgeCurve,
SmartObject.UpdateOption updateOption)
|
Point |
PointCollection.createPoint(IBaseCurve splarc,
View view)
Creates a
Point at the center of a splarc. |
Point |
PointCollection.createPoint(IBasePlane plane,
IBaseCurve curve,
Point helpPt1,
Point helpPt2,
SmartObject.UpdateOption updateOption)
|
Point |
PointCollection.createPoint(IParameterizedSurface face,
IBaseCurve curve,
Point helpPt1,
Point helpPt2,
SmartObject.UpdateOption updateOption)
|
Point |
PointCollection.createPoint(IParameterizedSurface face,
Scalar scalarU,
Scalar scalarV,
SmartObject.UpdateOption updateOption)
|
Point |
PointCollection.createPoint(IParameterizedSurface sphericalFace,
SmartObject.UpdateOption updateOption)
Creates a
Point at the center of a spherical face. |
Point |
PointCollection.createPoint(IRoutePosition routePosition,
Xform xform,
SmartObject.UpdateOption updateOption)
Creates a
Point at the given IRoutePosition . |
Point |
PointCollection.createPoint(Offset offset,
Point offsetPoint,
SmartObject.UpdateOption updateOption)
|
Point |
PointCollection.createPoint(Point3d coordinates)
Creates a
Point without parameters. |
Point |
PointCollection.createPoint(Point point1,
Point point2,
Scalar distancePercentage,
SmartObject.UpdateOption updateOption)
|
Point |
PointCollection.createPoint(Point pointExtract,
Xform xform,
SmartObject.UpdateOption updateOption)
|
Point |
PointCollection.createPoint(Scalar scalarX,
Scalar scalarY,
Scalar scalarZ,
SmartObject.UpdateOption updateOption)
|
Point |
PointCollection.createPoint(ScCollector faces,
IBaseCurve curve,
Point helpPt1,
Point helpPt2,
SmartObject.UpdateOption updateOption)
Creates a
Point at the intersection of a
connected set of faces and IBaseCurve . |
Point |
PointCollection.createPoint(SmartObject.UpdateOption updateOption,
nxopen.annotations.Annotation annotation,
Scalar t,
int side,
int block,
boolean attachFcfToDim)
|
Point |
PointCollection.createPoint(View view,
IBaseCurve edgeCurve1,
IBaseCurve edgeCurve2,
Point3d helpPt,
SmartObject.UpdateOption updateOption)
|
Point |
PointCollection.createPointOnPortExtractAlign(SmartObject.UpdateOption updateOption,
nxopen.routing.Port port,
Scalar distance)
Creates a
Point at a nxopen.routing.Port . |
Point |
PointCollection.createPointOnSectionCG(SmartObject.UpdateOption updateOption,
TaggedObject face)
Creates a
Point on the center of gravity of the sketch for a given sheet metal feature face
in history free mode. |
Point |
PointCollection.createPointOnSurfaceAxis(TaggedObject face,
Scalar parameter,
SmartObject.UpdateOption updateOption)
Creates a parameterised point on the center line axis of the given face.
|
Point |
PointCollection.createPointSplarc(IBaseCurve splarc,
View view)
|
Point |
PointCollection.createPointSplinePole(IBaseCurve splineCurve,
int poleIndex,
SmartObject.UpdateOption updateOption)
Creates a
Point at a spline pole. |
Point |
PointCollection.createQuadrantPoint(IBaseCurve curveOrEdge,
int quadrant,
SmartObject.UpdateOption updateOption)
Creates a quadrant point
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING") OR nx_masterfem ("Finite Element Modeling") OR geometric_tol ("GDT") . |
Point |
PointCollection.createStockOffsetPoint(Point basePoint,
Direction offsetDirr,
String offsetExpression,
SmartObject.UpdateOption updateOption)
Creates a Routing "Stock Offset" point.
|
Point |
PointCollection.createVirtualIntersectionPoint(IBaseCurve curve1,
IBaseCurve curve2,
Point helpPt1,
Point helpPt2,
SmartObject.UpdateOption updateOption)
Creates a
Point at the virtual intersection of two linear Edges or Curves. |
Point |
SketchConicBuilder.endPoint()
Returns the end point
License requirements: None. |
Point |
AutomaticTraceline.endPoint()
Returns the end point of the traceline
License requirements: assemblies ("ASSEMBLIES MODULE") . |
Point |
PointList.findItem(int index)
Returns the object at the input index.
|
Point |
PointCollection.findObject(String journalIdentifier)
Finds the
Point with the given identifier as recorded in a journal. |
Point |
HumanPosturePredictionBuilder.getAhpPoint()
Get the AHP point, it is null if AHP is set by coordinates
License requirements: solid_modeling ("SOLIDS MODELING"), ug_human ("Human Modelling") . |
Point[] |
SelectPointList.getArray()
Returns the list of objects in the selection list.
|
Point[] |
PointList.getContents()
Gets the contents of the entire list
License requirements: None. |
Point |
HumanPosturePredictionBuilder.getSgrpPoint()
Get the SgRP point, it is null if SgRP is set by coordinates
License requirements: solid_modeling ("SOLIDS MODELING"), ug_human ("Human Modelling") . |
Point |
SketchChamferBuilder.helpPoint()
Returns the coordinates of the help point for Chamfer creation
License requirements: drafting ("DRAFTING") OR solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT") . |
Point |
SketchEllipseBuilder.majorPoint()
Returns the point in major axis to calculate the major radius
License requirements: None. |
Point |
SketchEllipseBuilder.minorPoint()
Returns the point in minor axis to calculate the minor radius
License requirements: None. |
Point |
RegionPoint.point()
Returns the Point
License requirements: None. |
Point |
FourPointSurfaceBuilder.point1()
Returns the first point
License requirements: None. |
Point |
FourPointSurfaceBuilder.point2()
Returns the second point
License requirements: None. |
Point |
FourPointSurfaceBuilder.point3()
Returns the third point
License requirements: None. |
Point |
FourPointSurfaceBuilder.point4()
Returns the fourth point
License requirements: None. |
Point |
MeasureAngleBuilder.protractorEnd()
Returns the protractor end point
License requirements: solid_modeling ("SOLIDS MODELING") . |
Point |
SketchPolygonBuilder.sizePoint()
Returns the size point
License requirements: None. |
Point |
SketchInPlaceBuilder.sketchOrigin()
Returns the origin point for sketch
License requirements: None. |
Point |
SketchConicBuilder.startPoint()
Returns the start point
License requirements: None. |
Point |
AutomaticTraceline.startPoint()
Returns the start point of the traceline
License requirements: assemblies ("ASSEMBLIES MODULE") . |
Point |
SelectPoint.value()
Returns the object being selected
License requirements: None. |
Modifier and Type | Method and Description |
---|---|
boolean |
SelectPointList.add(Point object)
Adds an object to the list
License requirements: None. |
boolean |
SelectPointList.add(Point[] objects)
Adds a set of objects to the list
License requirements: None. |
boolean |
SelectPointList.add(Point selection,
View view,
Point3d point)
Adds the object with the objects view and objects point
License requirements: None. |
void |
Section.addSmartPoint(Point smartPt,
double tol)
Deprecated.
Deprecated in NX7.5.0. Please use
ScRuleFactory.createRuleCurveDumb(nxopen.Curve[]) followed by Section.addToSection(nxopen.SelectionIntentRule[], nxopen.NXObject, nxopen.NXObject, nxopen.NXObject, nxopen.Point3d, nxopen.Section.Mode) instead.
|
void |
PointList.append(Point object)
Appends an object to the list
License requirements: None. |
void |
PointList.append(Point[] objects)
Appends a set of objects to the list
License requirements: None. |
boolean |
SelectPointList.contains(Point object)
Returns whether the specified object is already in the list or not.
|
AutomaticTraceline |
TracelineCollection.createAutomaticTraceline(Explosion explosion,
Point startPoint,
Direction startDirection,
Point endPoint,
Direction endDirection,
Matrix3x3 orientation,
AutomaticTraceline.ModeOption mode,
int solution,
double startOffset,
double endOffset,
int[] segmentIndices,
double[] segmentLengths)
Create an automatic traceline
License requirements: assemblies ("ASSEMBLIES MODULE") . |
Axis |
AxisCollection.createAxis(Point point,
Direction direction,
SmartObject.UpdateOption update)
|
Offset |
OffsetCollection.createCurvature(Point atPoint,
Face face,
Offset.OnFaceOption option,
SmartObject sectionDirection,
SmartObject.UpdateOption updateOption)
|
Offset |
OffsetCollection.createCurvature(Point atPoint,
ICurve icurve,
SmartObject.UpdateOption updateOption)
|
Offset |
OffsetCollection.createCurvatureDerivative(Point atPoint,
Face face,
Offset.OnFaceOption option,
SmartObject sectionDirection,
SmartObject.UpdateOption updateOption)
|
Offset |
OffsetCollection.createCurvatureDerivative(Point atPoint,
ICurve icurve,
SmartObject.UpdateOption updateOption)
|
Direction |
DirectionCollection.createDirection(Face geomObj,
Point point,
Sense sense,
SmartObject.UpdateOption updateOption)
|
Direction |
DirectionCollection.createDirection(IBaseCurve icurve,
Point point,
Direction.OnCurveOption option,
Sense sense,
SmartObject.UpdateOption updateOption)
|
Direction |
DirectionCollection.createDirection(IParameterizedSurface face,
Point point,
Sense sense,
SmartObject.UpdateOption updateOption)
|
Direction |
DirectionCollection.createDirection(Point point,
Expression exp,
Sense sense,
SmartObject.UpdateOption updateOption)
Creates a
nxopen.Direction using an Expression . |
Direction |
DirectionCollection.createDirection(Point atPoint,
Face face,
Direction.OnFaceOption option,
SmartObject sectionDirection,
Sense sense,
SmartObject.UpdateOption updateOption)
|
Direction |
DirectionCollection.createDirection(Point startPoint,
Point endPoint,
SmartObject.UpdateOption updateOption)
Creates a
nxopen.Direction using two Point s. |
Direction |
DirectionCollection.createDirection(Point point,
Vector3d vector)
Creates a
nxopen.Direction based upon the parameters used
to define the point. |
Direction |
DirectionCollection.createDirectionOnPointParentCurve(Point atPoint,
IBaseCurve curve,
Direction.OnCurveOption option,
Sense sense,
SmartObject.UpdateOption updateOption)
|
DraftPointData |
DraftPointDataCollection.createDraftPointData(Point point,
String angle)
Creates a DraftPointData object.
|
Line |
CurveCollection.createLine(Point startPoint,
Point endPoint)
|
Point |
PointCollection.createPoint(CAEFace face,
Point projectedPoint,
SmartObject.UpdateOption updateOption)
Creates a point by projecting onto a face.
|
Point |
PointCollection.createPoint(IBaseCurve curve1,
IBaseCurve curve2,
Point helpPt1,
Point helpPt2,
SmartObject.UpdateOption updateOption)
Creates a
Point at the intersection of two Edges or Curves. |
Point |
PointCollection.createPoint(IBaseCurve edgeCurve,
Point pointOffset,
Scalar distancePercent,
PointCollection.AlongCurveOption option,
Sense sense,
SmartObject.UpdateOption updateOption)
|
Point |
PointCollection.createPoint(IBasePlane plane,
IBaseCurve curve,
Point helpPt1,
Point helpPt2,
SmartObject.UpdateOption updateOption)
|
Point |
PointCollection.createPoint(IParameterizedSurface face,
IBaseCurve curve,
Point helpPt1,
Point helpPt2,
SmartObject.UpdateOption updateOption)
|
Point |
PointCollection.createPoint(Offset offset,
Point offsetPoint,
SmartObject.UpdateOption updateOption)
|
Point |
PointCollection.createPoint(Point point1,
Point point2,
Scalar distancePercentage,
SmartObject.UpdateOption updateOption)
|
Point |
PointCollection.createPoint(Point pointExtract,
Xform xform,
SmartObject.UpdateOption updateOption)
|
Point |
PointCollection.createPoint(ScCollector faces,
IBaseCurve curve,
Point helpPt1,
Point helpPt2,
SmartObject.UpdateOption updateOption)
Creates a
Point at the intersection of a
connected set of faces and IBaseCurve . |
RegionPoint |
Part.createRegionPoint(Point point,
Body body)
Creates an item that contains a point and its corresponding body context for a region
License requirements: None. |
CurveDumbRule |
ScRuleFactory.createRuleCurveDumbFromPoints(Point[] points)
Creates selection intent rule:
CurveDumbRule
License requirements: gateway ("UG GATEWAY") Created in NX5.0.0 |
Point |
PointCollection.createStockOffsetPoint(Point basePoint,
Direction offsetDirr,
String offsetExpression,
SmartObject.UpdateOption updateOption)
Creates a Routing "Stock Offset" point.
|
Polyline |
PolylineCollection.createThroughPoints(SmartObject.UpdateOption updateOption,
Point[] points,
boolean isClosed)
Create a polyline from points
License requirements: solid_modeling ("SOLIDS MODELING") . |
Point |
PointCollection.createVirtualIntersectionPoint(IBaseCurve curve1,
IBaseCurve curve2,
Point helpPt1,
Point helpPt2,
SmartObject.UpdateOption updateOption)
Creates a
Point at the virtual intersection of two linear Edges or Curves. |
Xform |
XformCollection.createXform(CoordinateSystem csys,
Point point0,
Point point1,
Scalar rotationScalarX,
Scalar rotationScalarY,
Scalar rotationScalarZ,
int rotationOption,
SmartObject.UpdateOption updateOption,
double scale)
Creates a Xform by picking up a point from an existing coordinate system
License requirements: None. |
Xform |
XformCollection.createXform(Point xPoint,
Axis zAxis,
SmartObject.UpdateOption updateOption)
Creates an Xform using a Z axis and X point
The X-Axis is the vector from the Z-Axis vector to the point;
the Y-Axis is computed from the X and Z axis; the origin is the
intersection of the three vectors.
|
Xform |
XformCollection.createXform(Point origin,
Direction xDirection,
Direction yDirection,
SmartObject.UpdateOption updateOption,
double scale)
Creates a Xform based on a point and two vectors.
|
Xform |
XformCollection.createXform(Point point,
Point helperPoint,
ICurve curve,
SmartObject.UpdateOption updateOption)
Creates an Xform through a point and perpendicular to a curve or edge.
|
Xform |
XformCollection.createXform(Point point1,
Point point2,
Point point3,
SmartObject.UpdateOption updateOption,
double scale)
Create a Xform based on three points.
|
Xform |
XformCollection.createXform(Point origin,
XYZAxis axis,
Direction direction,
Scalar scale,
SmartObject.UpdateOption updateOption)
Creates an Xform based on origin and a direction.
|
Xform |
XformCollection.createXformByPlaneXDirPoint(DisplayableObject plane,
Direction xDirection,
Point point,
SmartObject.UpdateOption updateOption,
double scale,
boolean flipXDirection,
boolean flipZDirection)
Creates a Xform based on a planar face or datum plane, a X-axis vector direction, and a point.
|
Xform |
XformCollection.createXformByPointXDirZDir(Point origin,
Direction xDirection,
Direction zDirection,
SmartObject.UpdateOption updateOption,
double scale)
Creates an Xform based on a point and two vectors.
|
Xform |
XformCollection.createXformByPointYDirZDir(Point origin,
Direction yDirection,
Direction zDirection,
SmartObject.UpdateOption updateOption,
double scale)
Creates an Xform based on a point and two vectors.
|
Xform |
XformCollection.createXformDistanceBetweenPoints(Point origin,
Point measure,
Direction vector,
Expression distance,
Expression originDistance,
SmartObject.UpdateOption updateOption)
Creates a Motion Xform based on the direction and points.
|
Xform |
XformCollection.createXformDistanceRadial(Axis axis,
Point point,
Expression distance,
Expression originDistance,
SmartObject.UpdateOption updateOption)
Creates a Motion Xform based on the axis and points.
|
Xform |
XformCollection.createXformRotateThreePoints(Axis vector,
Point start,
Point end,
SmartObject.UpdateOption updateOption)
Creates a Motion Xform based on the three points and vector.
|
Xform |
XformCollection.createXformTwoPoints(Point from,
Point to,
SmartObject.UpdateOption updateOption)
Creates a Motion Xform based on two points.
|
void |
PointCollection.deletePoint(Point point)
Deletes a
Point by adding the point to the delete list and then
updating the delete list without performing a general update. |
void |
Measurement.displayArcLengthBetweenPoints(Point point1,
Point point2)
Calculates and displays the arc length between two points on curves.
|
void |
Information.displayPointDetails(Point point)
Obtains the absolute and work coordinates of an explicit or implicit point
and displays information in the
ListingWindow device. |
void |
MeasureManager.editAngle(Measure feature,
Point basePoint,
Point endPoint1,
Point endPoint2,
boolean minorAngle)
Edit an angle measurement between three points.
|
void |
MeasureManager.editAngle(String name,
Point basePoint,
Point endPoint1,
Point endPoint2,
boolean minorAngle)
Edit an embedded angle measurement between three points.
|
void |
MeasureManager.editPoint(Measure feature,
Point object1,
CartesianCoordinateSystem object2)
Edit a point measurement between a point and either the absolute csys, or a
specified coordinate system.
|
void |
MeasureManager.editPolarAngle(Measure feature,
MeasureManager.MeasureType minMaxFlag,
Point point,
Direction vector,
ScCollector objects)
Edit a polar angle measurement feature.
|
void |
MeasureManager.editPolarRadius(Measure feature,
MeasureManager.MeasureType minMaxFlag,
Point point,
ScCollector objects)
Edit a polar radius measurement feature.
|
void |
PointList.erase(Point obj)
Erases the object from the list, but does not delete the object.
|
void |
PointList.erase(Point obj,
ObjectList.DeleteOption deleteOption)
Erases the object from the list.
|
int |
PointList.findIndex(Point obj)
Finds the index where the input object appears.
|
Measurement.ArcLengthBetweenPointsData |
Measurement.getArcLengthBetweenPoints(Point point1,
Point point2)
Calculates and returns the arc length between two points on curves.
|
void |
PointList.insert(int location,
Point object)
Inserts an object at the specified location
License requirements: None. |
MeasureAngle |
MeasureManager.newAngle(Unit units,
boolean createGeometry,
Point basePoint,
Point endPoint1,
Point endPoint2,
boolean minorAngle)
Create an angle measurement between three points with the option to
create smart geometry.
|
MeasureAngle |
MeasureManager.newAngle(Unit units,
Point basePoint,
Point endPoint1,
Point endPoint2,
boolean minorAngle)
Create an angle measurement between three points.
|
MeasurePoint |
MeasureManager.newPoint(Point point,
CartesianCoordinateSystem csys,
boolean createExpressions)
Create a point measurement between a point and either the absolute csys, or a
specified coordinate system.
|
MeasureLength |
MeasureManager.newPointsOnCurvesLength(Unit units,
Point[] objects)
Creates a points on curves arc length object for all the selected objects.
|
MeasurePolarAngle |
MeasureManager.newPolarAngle(Unit units,
MeasureManager.MeasureType minMaxFlag,
Point point,
Direction vector,
ScCollector objects)
Creates an extreme polar angle measurement from the collection of input curves.
|
MeasurePolarAngle |
MeasureManager.newPolarAngle(Unit units,
MeasureManager.MeasureType minMaxFlag,
Point point,
Direction vector,
ScCollector objects,
boolean createGeometry)
Creates an extreme polar angle measurement from the collection of input curves.
|
MeasurePolarRadius |
MeasureManager.newPolarRadius(Unit units,
MeasureManager.MeasureType minMaxFlag,
Point point,
ScCollector objects)
Creates an extreme polar radius measurement from the collection of input curves.
|
MeasurePolarRadius |
MeasureManager.newPolarRadius(Unit units,
MeasureManager.MeasureType minMaxFlag,
Point point,
ScCollector objects,
boolean createGeometry)
Creates an extreme polar radius measurement from the collection of input curves.
|
boolean |
SelectPointList.remove(InferSnapType.SnapType snapType,
Point selection1,
View view1,
Point3d point1,
Point selection2,
View view2,
Point3d point2)
Remove specified object from list.
|
boolean |
SelectPointList.remove(Point object)
Remove specified object from list.
|
boolean |
SelectPointList.remove(Point object,
View view)
Remove specified object from list.
|
boolean |
SelectPointList.removeArray(Point[] objects)
Remove specified objects from list.
|
void |
Section.removeMultipleElements(ICurve[] wfs,
NXObject[] startConnectors,
NXObject[] endConnectors,
boolean[] isCombinationsResultIntoOnlyOneCurvePerCombination,
Point3d[] pointsOnCurvesToBeRemoved,
Point[] points,
Section.Mode featureMode)
Removes multiple section elements.
|
void |
Section.removeMultiplePoints(Point[] points,
Section.Mode featureMode)
Deprecated.
Deprecated in NX8.5.0. Please use
Section.removeMultipleElements(nxopen.ICurve[], nxopen.NXObject[], nxopen.NXObject[], boolean[], nxopen.Point3d[], nxopen.Point[], nxopen.Section.Mode) instead.
|
void |
PointCollection.removeParameters(Point point)
Removes the parameters from an associative
Point . |
void |
Section.removeSingleSectionElement(Point sectionElement,
Section.Mode featureMode)
Removes one section element that is a point.
|
void |
HumanPosturePredictionBuilder.setAhpPoint(Point ahpPoint)
Set the AHP point by an existing point
License requirements: solid_modeling ("SOLIDS MODELING"), ug_human ("Human Modelling") . |
void |
SelectPointList.setArray(Point[] objects)
Sets the list of objects in the selection list.
|
void |
MeasureAngleBuilder.setBaseEnd(Point baseEnd)
License requirements: solid_modeling ("SOLIDS MODELING") . |
void |
MeasureAngleBuilder.setBasePoint(Point basePoint)
License requirements: solid_modeling ("SOLIDS MODELING") . |
void |
SketchPolygonBuilder.setCenterPoint(Point centerPoint)
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT") . |
void |
SketchEllipseBuilder.setCenterPoint(Point centerPoint)
License requirements: None. |
void |
PointList.setContents(Point[] objects)
Sets the contents of the entire list.
|
void |
SketchConicBuilder.setControlPoint(Point controlPoint)
License requirements: None. |
void |
SketchConicBuilder.setEndPoint(Point endPoint)
License requirements: None. |
void |
AutomaticTraceline.setEndPoint(Point point)
License requirements: assemblies ("ASSEMBLIES MODULE") . |
void |
SketchChamferBuilder.setHelpPoint(Point helpPoint)
License requirements: drafting ("DRAFTING") OR solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT") . |
void |
SketchEllipseBuilder.setMajorPoint(Point majorPoint)
License requirements: None. |
void |
SketchEllipseBuilder.setMinorPoint(Point minorPoint)
License requirements: None. |
void |
RegionPoint.setPoint(Point point)
License requirements: solid_modeling ("SOLIDS MODELING") . |
void |
FourPointSurfaceBuilder.setPoint1(Point point1)
License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM") . |
void |
FourPointSurfaceBuilder.setPoint2(Point point2)
License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM") . |
void |
FourPointSurfaceBuilder.setPoint3(Point point3)
License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM") . |
void |
FourPointSurfaceBuilder.setPoint4(Point point4)
License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM") . |
void |
MeasureAngleBuilder.setProtractorEnd(Point protractorEnd)
License requirements: solid_modeling ("SOLIDS MODELING") . |
void |
HumanPosturePredictionBuilder.setSgrpPoint(Point sgrpPoint)
Set the SgRP point by an existing point
License requirements: solid_modeling ("SOLIDS MODELING"), ug_human ("Human Modelling") . |
void |
SketchPolygonBuilder.setSizePoint(Point sizePoint)
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT") . |
void |
SketchInPlaceBuilder.setSketchOrigin(Point origin)
License requirements: None. |
void |
SketchConicBuilder.setStartPoint(Point startPoint)
License requirements: None. |
void |
AutomaticTraceline.setStartPoint(Point point)
License requirements: assemblies ("ASSEMBLIES MODULE") . |
void |
SelectPoint.setValue(Point selection)
Sets the object being selected
License requirements: None. |
void |
SelectPoint.setValue(Point selection,
View view,
Point3d point)
The object being selected with the object's view and object's point
License requirements: None. |
boolean |
SelectPointList.setValueWithCaeSetObjectInfo(Point selection,
CaeObjectType.CaeSubType caeSubType,
int caeSubId)
Deprecated.
Deprecated in NX10.0.0. Use other versions of
SelectObjectList.add(nxopen.TaggedObject) .
|
void |
SelectPoint.setValueWithCaeSetObjectInfo(Point selection,
CaeObjectType.CaeSubType caeSubType,
int caeSubId)
Deprecated.
Deprecated in NX10.0.0. Use other versions of
SelectObject.setValue(nxopen.TaggedObject) .
|
boolean |
SelectPointList.setValueWithSnap(InferSnapType.SnapType snapType,
Point selection1,
View view1,
Point3d point1,
Point selection2,
View view2,
Point3d point2)
The object being selected with the objects view and objects point and snap information.
|
void |
SelectPoint.setValueWithSnap(InferSnapType.SnapType snapType,
Point selection1,
View view1,
Point3d point1,
Point selection2,
View view2,
Point3d point2)
The object being selected with the objects view and objects point and snap information.
|
void |
PointList.swap(Point object1,
Point object2)
Exchanges the position of two objects inside the list.
|
Modifier and Type | Method and Description |
---|---|
Point |
MasterCustomSymbolData.anchor()
Deprecated.
Deprecated in NX9.0.0. Use
MasterSymbolBuilder instead.
|
Point |
MasterSymbolBuilder.anchorPoint()
Returns the anchor point
License requirements: None. |
Point |
RegionBuilder.endPoint()
Returns the end point
Only available when the region type is
RegionBuilder.Types.CYLINDRICAL_REGION
License requirements: None. |
Point |
BaseCustomSymbol.getAnchor()
Returns the master custom symbol anchor point
License requirements: None. |
Point |
MasterSymbolBuilder.getLeaderAttachmentPoint(MasterSymbolBuilder.LeaderAttachmentType attachmentType)
Getting Leader attachment point from builder side
License requirements: None. |
Point |
LocatorDesignatorBuilder.hotSpot()
Returns the hot spot
License requirements: None. |
Point |
RegionBuilder.origin()
Returns the origin
Only available when region type is
RegionBuilder.Types.RECTANGULAR_REGION ,
RegionBuilder.Types.CIRCULAR_REGION ,
RegionBuilder.Types.ANNULAR_REGION
License requirements: None. |
Point |
ArbitraryAreaSeedBuilder.specifyPoint()
Returns the specify point
License requirements: None. |
Point |
RegionBuilder.startPoint()
Returns the start point
Only available when the region type is
RegionBuilder.Types.CYLINDRICAL_REGION
License requirements: None. |
Point |
CoordinateNoteBuilder.trackingPoint()
Returns the tracking point
License requirements: None. |
Modifier and Type | Method and Description |
---|---|
void |
MasterCustomSymbolData.setAnchor(Point anchor)
Deprecated.
Deprecated in NX9.0.0. Use
MasterSymbolBuilder instead.
|
void |
BaseCustomSymbol.setAnchor(Point anchorPoint)
Sets the master custom symbol anchor point.
|
void |
MasterSymbolBuilder.setAnchorPoint(Point anchorPoint)
License requirements: drafting ("DRAFTING") . |
void |
RegionBuilder.setEndPoint(Point endPoint)
License requirements: geometric_tol ("GDT") . |
void |
LocatorDesignatorBuilder.setHotSpot(Point hotSpot)
License requirements: None. |
void |
MasterSymbolBuilder.setLeaderAttachmentPoint(MasterSymbolBuilder.LeaderAttachmentType attachmentType,
Point leaderAttachmentPoint)
Setting Leader attachment point on builder side
License requirements: drafting ("DRAFTING") . |
void |
RegionBuilder.setOrigin(Point origin)
License requirements: geometric_tol ("GDT") . |
void |
ArbitraryAreaSeedBuilder.setSpecifyPoint(Point specifyPoint)
License requirements: geometric_tol ("GDT") . |
void |
RegionBuilder.setStartPoint(Point startPoint)
License requirements: geometric_tol ("GDT") . |
void |
CoordinateNoteBuilder.setTrackingPoint(Point trackingPoint)
License requirements: None. |
Modifier and Type | Method and Description |
---|---|
Point |
OnestepUnformBuilder.matchPointOne()
Returns the first match point for spring back calculation.
|
Point |
OnestepUnformBuilder.matchPointThree()
Returns the third match point for spring back calculation.
|
Point |
OnestepUnformBuilder.matchPointTwo()
Returns the second match point for spring back calculation.
|
Modifier and Type | Method and Description |
---|---|
void |
OnestepUnformBuilder.setConstraintInformation(boolean noCommonEdges,
int[] revisedDirU,
int[] revisedDirT,
int[] index,
int[] constraintType,
int[] cacNumsUnform,
int[] cacNumsTarget,
TaggedObject[] consCurveFromUnform,
TaggedObject[] consCurveFromTarget,
Point[] consPointFromUnform,
Point[] consPointFromTarget,
double[] startPtOfConsCrvsUnform,
double[] startPtOfConsCrvsTarget)
Set constraint information.
|
void |
OnestepUnformBuilder.setConstraintInformation(boolean noCommonEdges,
int[] revisedDirU,
int[] revisedDirT,
int[] index,
int[] constraintType,
int[] cacNumsUnform,
int[] cacNumsTarget,
TaggedObject[] consCurveFromUnform,
TaggedObject[] consCurveFromTarget,
Point[] consPointFromUnform,
Point[] consPointFromTarget,
double[] startPtOfConsCrvsUnform,
double[] startPtOfConsCrvsTarget)
Set constraint information.
|
void |
OnestepUnformBuilder.setMatchPointOne(Point matchPointOne)
License requirements: nx_onestep_analysis ("NX Onestep Analysis") OR ug_body_design ("Body Design") OR die_engineering ("DIE ENGINEERING") OR aero_sheet_metal ("Aerospace Sheet Metal") . |
void |
OnestepUnformBuilder.setMatchPointThree(Point matchPointThree)
License requirements: nx_onestep_analysis ("NX Onestep Analysis") OR ug_body_design ("Body Design") OR die_engineering ("DIE ENGINEERING") OR aero_sheet_metal ("Aerospace Sheet Metal") . |
void |
OnestepUnformBuilder.setMatchPointTwo(Point matchPointTwo)
License requirements: nx_onestep_analysis ("NX Onestep Analysis") OR ug_body_design ("Body Design") OR die_engineering ("DIE ENGINEERING") OR aero_sheet_metal ("Aerospace Sheet Metal") . |
Modifier and Type | Method and Description |
---|---|
Point |
CfdLocalResolutionConstraintBuilder.bboxPoint()
Returns the bbox point
License requirements: None. |
Point |
ContactMeshBuilder.contactEdgeEndPoint()
Returns the end point of contact on contact edge
License requirements: None. |
Point |
ContactMeshBuilder.contactEdgeStartPoint()
Returns the start point of contact on contact edge
License requirements: None. |
Point |
FaceFromBoundaryBuilder.firstPtSelect()
Returns the first pt to join the ends of open edges in the loop.
|
Point |
FluidDomainBuilder.interiorPoint()
Returns the interior point.
|
Point |
NodeCreateBuilder.point()
Returns the point
License requirements: None. |
Point |
MeshPointProjectBuilder.point()
Returns the point
License requirements: None. |
Point |
ElementSplitBuilder.point1()
Returns the point1, one end of line when split by line
License requirements: None. |
Point |
ElementSplitBuilder.point2()
Returns the point2, the other end of line when split by line
License requirements: None. |
Point |
CfdLocalResolutionConstraintBuilder.pointSelection()
Returns the point selection
License requirements: None. |
Point |
NodeTranslateBuilder.pointSource()
Returns the source point
License requirements: None. |
Point |
NodeTranslateBuilder.pointTarget()
Returns the target point
License requirements: None. |
Point |
FaceFromBoundaryBuilder.secondPtSelect()
Returns the second pt to join the ends of open edges in the loop.
|
Point |
LaminateDrapingDataBuilder.startPoint()
Returns the start point
License requirements: nx_lam_comp_adv ("Laminate Composites Advanced") . |
Point |
ContactMeshBuilder.targetEdgeEndPoint()
Returns the end point of contact on target edge
License requirements: None. |
Point |
ContactMeshBuilder.targetEdgeStartPoint()
Returns the start point of contact on target edge
License requirements: None. |
Point |
ElementExtrudeBuilder.twistOrigin()
Returns the twist origin
License requirements: None. |
Point |
CorrelAlignmentBuilder.wrkPt1()
Returns the working common origin point
License requirements: None. |
Point |
CorrelAlignmentBuilder.wrkPt2()
Returns the working first axis origin point
License requirements: None. |
Point |
CorrelAlignmentBuilder.wrkPt3()
Returns the working second axis point
License requirements: None. |
Modifier and Type | Method and Description |
---|---|
RelatedNodeMethod |
SmartSelectionManager.createRelatedNodeMethod(Point[] seedTags)
Creates a related node method
License requirements: nx_masterfem ("Finite Element Modeling") . |
void |
CfdLocalResolutionConstraintBuilder.setBboxPoint(Point bboxPoint)
License requirements: nx_adv_fluid_mod ("NX Advanced Fluid Modeling") . |
void |
ContactMeshBuilder.setContactEdgeEndPoint(Point contactEdgeEndPoint)
License requirements: nx_masterfem ("Finite Element Modeling") . |
void |
ContactMeshBuilder.setContactEdgeStartPoint(Point contactEdgeStartPoint)
License requirements: nx_masterfem ("Finite Element Modeling") . |
void |
FaceFromBoundaryBuilder.setFirstPtSelect(Point firstPtSelect)
License requirements: None. |
void |
FluidDomainBuilder.setInteriorPoint(Point point)
License requirements: nx_adv_fluid_mod ("NX Advanced Fluid Modeling") . |
void |
NodeCreateBuilder.setPoint(Point point)
License requirements: nx_masterfem ("Finite Element Modeling") . |
void |
MeshPointProjectBuilder.setPoint(Point point)
License requirements: nx_masterfem ("Finite Element Modeling") . |
void |
ElementSplitBuilder.setPoint1(Point point1)
License requirements: nx_masterfem ("Finite Element Modeling") . |
void |
ElementSplitBuilder.setPoint2(Point point2)
License requirements: nx_masterfem ("Finite Element Modeling") . |
void |
CfdLocalResolutionConstraintBuilder.setPointSelection(Point pointSelection)
License requirements: nx_adv_fluid_mod ("NX Advanced Fluid Modeling") . |
void |
NodeTranslateBuilder.setPointSource(Point sourcePoint)
License requirements: nx_masterfem ("Finite Element Modeling") . |
void |
NodeTranslateBuilder.setPointTarget(Point targetPoint)
License requirements: nx_masterfem ("Finite Element Modeling") . |
void |
FaceFromBoundaryBuilder.setSecondPtSelect(Point secondPtSelect)
License requirements: None. |
void |
LaminateDrapingDataBuilder.setStartPoint(Point startPoint)
License requirements: nx_lam_comp_adv ("Laminate Composites Advanced") . |
void |
ContactMeshBuilder.setTargetEdgeEndPoint(Point targetEdgeEndPoint)
License requirements: nx_masterfem ("Finite Element Modeling") . |
void |
ContactMeshBuilder.setTargetEdgeStartPoint(Point targetEdgeStartPoint)
License requirements: nx_masterfem ("Finite Element Modeling") . |
void |
ElementExtrudeBuilder.setTwistOrigin(Point twistOrigin)
License requirements: nx_masterfem ("Finite Element Modeling") . |
void |
CorrelAlignmentBuilder.setWrkPt1(Point wrkPt1)
License requirements: nx_correl_base ("FE Correlation") . |
void |
CorrelAlignmentBuilder.setWrkPt2(Point wrkPt2)
License requirements: nx_correl_base ("FE Correlation") . |
void |
CorrelAlignmentBuilder.setWrkPt3(Point wrkPt3)
License requirements: nx_correl_base ("FE Correlation") . |
Modifier and Type | Method and Description |
---|---|
Point |
TBSCastCondition.middlePlanePoint()
Returns the point within the central plane, only available when
nxopen.cae.optimization.TBSCastCondition#middlePlaneType is
CAE.Optimization.TBSCastCondition.MiddlePlaneType#POINT
License requirements: None. |
Modifier and Type | Method and Description |
---|---|
void |
TBSCastCondition.setMiddlePlanePoint(Point middlePlanePoint)
License requirements: cae_opt_topo ("NX Topology Optimization") OR cae_opt_topobead ("NX Bead Optimization") OR cae_opt_toposhape ("NX Shape Optimization") . |
Modifier and Type | Field and Description |
---|---|
Point[] |
SpunOutlineGeom.PlanesThroughPointsData.points
array of start points for each set
|
Modifier and Type | Method and Description |
---|---|
Point |
OperationTransformBuilder.angleEndPoint()
Returns the angle end point
License requirements: None. |
Point |
InspectionOperationTransformBuilder.angleEndPoint()
Returns the angle end point
License requirements: None. |
Point |
OperationTransformBuilder.anglePivotPoint()
Returns the angle pivot point
License requirements: None. |
Point |
InspectionOperationTransformBuilder.anglePivotPoint()
Returns the angle pivot point
License requirements: None. |
Point |
OperationTransformBuilder.angleStartPoint()
Returns the angle start point
License requirements: None. |
Point |
InspectionOperationTransformBuilder.angleStartPoint()
Returns the angle start point
License requirements: None. |
Point |
OperationTransformBuilder.arrayOriginPoint()
Returns the array origin point
License requirements: None. |
Point |
InspectionOperationTransformBuilder.arrayOriginPoint()
Returns the array origin point
License requirements: None. |
Point |
TurnProbeClearanceBuilder.axialPlanePoint()
Returns the axial plane point
License requirements: None. |
Point |
TurnAvoidanceClearanceBuilder.axialPlanePoint()
Returns the axial plane point
License requirements: None. |
Point |
LaserCutoutDefinition.centerPoint()
Returns the Center Point
License requirements: None. |
Point |
CircularAboutAxisMoveBuilder.centerPoint()
Returns the center
License requirements: None. |
Point |
TurnFeatureGeomBuilder.cutRegionSelectionPoint()
Returns the cut region selection point
License requirements: cam_base ("CAM BASE") . |
Point |
CenterlineDrillTurningBuilder.depthEndPoint()
Returns the depth end point
License requirements: None. |
Point |
VectorDistanceMoveBuilder.endPoint()
Returns the end point in the direction specified
License requirements: None. |
Point |
TabPointDataBuilder.endPoint()
Returns the tab end point
License requirements: cam_base ("CAM BASE") . |
Point |
SplitSubopCommand.endPoint()
Returns the end point value
License requirements: None. |
Point |
FollowPartMoveBuilder.endPoint()
Returns the end location
License requirements: None. |
Point |
FollowCurveMoveBuilder.endPoint()
Returns the end location
License requirements: None. |
Point |
CircularAboutAxisMoveBuilder.endPoint()
Returns the arc end point
License requirements: None. |
Point |
TurnAvoidanceFromBuilder.fromPoint()
Returns the from point
License requirements: None. |
Point |
ToolAxisInterpolate.getPoint(int index)
Get the point
License requirements: None. |
Point[] |
NcmScEngRetBuilder.getPoints()
Gets engage/retract points
License requirements: None. |
Point[] |
NcmPlanarEngRetBuilder.getPoints()
Gets engage/retract points
License requirements: None. |
Point[] |
NcmPlanarBuilder.getPredrillPoints()
The pre-drill points
License requirements: None. |
Point[] |
NcmSubopBuilder.getRegionStartPoints()
Returns region start points
License requirements: None. |
Point[] |
EditSubopCommand.getStartPoints()
Get the start point value
License requirements: None. |
Point |
TurnAvoidanceGohomeBuilder.gohomePoint()
Returns the gohome point
License requirements: None. |
Point |
InspectionCmmCommandBuilder.homePtPoint()
Returns the home point location
License requirements: None. |
Point |
InspectionCmmCommandBuilder.intermediatePoint()
Returns the intermediate point
License requirements: None. |
Point |
OperationTransformBuilder.lineEndPoint()
Returns the line end point
License requirements: None. |
Point |
InspectionOperationTransformBuilder.lineEndPoint()
Returns the line end point
License requirements: None. |
Point |
OperationTransformBuilder.linePoint()
Returns the line point
License requirements: None. |
Point |
InspectionOperationTransformBuilder.linePoint()
Returns the line point
License requirements: None. |
Point |
OperationTransformBuilder.lineStartPoint()
Returns the line start point
License requirements: None. |
Point |
InspectionOperationTransformBuilder.lineStartPoint()
Returns the line start point
License requirements: None. |
Point |
NcmTurnThreadBuilder.localReturnFinishPoint()
Returns the Local Return Finish Point
License requirements: None. |
Point |
NcmTurnThreadBuilder.localReturnPoint()
Returns the Local Return Point
License requirements: None. |
Point |
NcmTurnThreadBuilder.localReturnRoughPoint()
Returns the Local Return Rough Point
License requirements: None. |
Point |
TurnRoughFinishTestCut.measuringPoint()
Returns the test cut measuring point
License requirements: None. |
Point |
RotaryFinishGeomBuilder.partAxisPoint()
Returns the part axis point
License requirements: None. |
Point |
PartAxisBuilder.partAxisPoint()
Returns the part axis point
License requirements: None. |
Point |
MultiBladeGeomBuilder.partAxisPoint()
Returns the part axis point
License requirements: None. |
Point |
RoughTurningBuilder.partOffPositionPoint()
Returns the Part Off Position Point
License requirements: None. |
Point |
DmSpiralBuilder.patternCenterPoint()
Returns the Pattern Center Point
License requirements: None. |
Point |
DmBndBuilder.patternCenterPoint()
Returns the Pattern Center Point
License requirements: None. |
Point |
DmAmBuilder.patternCenterPoint()
Returns the Pattern Center Point
License requirements: None. |
Point |
AreaMillingNonSteepContainment.patternCenterPoint()
Returns the Pattern Center Point
License requirements: None. |
Point |
WedmPointDefinitionBuilder.point()
Returns the wedm point
License requirements: cam_base ("CAM BASE") . |
Point |
UdeParameter.point()
Returns the point of the parameter
License requirements: cam_base ("CAM BASE") . |
Point |
TurnRoughFinishLocalReturnBuilder.point()
Returns the local return point
License requirements: None. |
Point |
TurnProbeInspectPointMoveBuilder.point()
Returns the point to probe
License requirements: None. |
Point |
TurnMoveToPointBuilder.point()
Returns the location
License requirements: None. |
Point |
TurnEngageRetractBuilder.point()
Returns the point
License requirements: None. |
Point |
TrimPoint.point()
Returns the trim point
License requirements: None. |
Point |
TrimPlane.point()
Returns the trim plane point
License requirements: None. |
Point |
ToolAxisTilt.point()
Returns the tool axis point
License requirements: None. |
Point |
ToolAxisBase.point()
Returns the Point
License requirements: None. |
Point |
TeachmodeLinearMoveBuilder.point()
Returns the Point
License requirements: None. |
Point |
StopPosition.point()
Returns the stop at point
License requirements: None. |
Point |
RotaryPolarMoveBuilder.point()
Returns the location
License requirements: None. |
Point |
RotaryPointMoveBuilder.point()
Returns the location
License requirements: None. |
Point |
ProjVecCiBuilder.point()
Returns the Point
License requirements: None. |
Point |
ProbeInspectSurfacePointMoveBuilder.point()
Returns the point to probe
License requirements: None. |
Point |
ProbeInspectPointMoveBuilder.point()
Returns the point to probe
License requirements: None. |
Point |
ProbeInspectBorebossMoveBuilder.point()
Returns the point defining the cylinder to inspect
License requirements: None. |
Point |
ProbeCalibrateStylusMoveBuilder.point()
Returns the point defining the cylinder to probe
License requirements: None. |
Point |
ProbeCalibrateSphereMoveBuilder.point()
Returns the point defining the sphere to probe
License requirements: None. |
Point |
ProbeCalibrateLengthMoveBuilder.point()
Returns the point to probe
License requirements: None. |
Point |
NormalToToolAxisMoveBuilder.point()
Returns the point in normal direction
License requirements: None. |
Point |
NcmAvoidancePointBuilder.point()
Returns the avoidance point
License requirements: None. |
Point |
MoveToPointBuilder.point()
Returns the location
License requirements: None. |
Point |
LaserPiercingPoint.point()
Returns the Piercing Point
License requirements: None. |
Point |
LaserLinearMove.point()
Returns the Point
License requirements: None. |
Point |
LaserControlPoint.point()
Returns the Control Point
License requirements: None. |
Point |
InPathEventDataBuilder.point()
Returns the Inpath Events Location
License requirements: cam_base ("CAM BASE") . |
Point |
InitialProfilePlunge.point()
Returns the initial profile plunge point
License requirements: None. |
Point |
FirstPlunge.point()
Returns the first plunge point
License requirements: None. |
Point |
BoundaryTurnBlank.point()
Returns the head stock position
License requirements: None. |
Point |
TurnProbeClearanceBuilder.radialPlanePoint()
Returns the radial plane point
License requirements: None. |
Point |
TurnAvoidanceClearanceBuilder.radialPlanePoint()
Returns the radial plane point
License requirements: None. |
Point |
ToolPathEditorBuilder.referencePoint()
Returns the reference point
License requirements: None. |
Point |
OperationTransformBuilder.referencePoint()
Returns the reference point
License requirements: None. |
Point |
InspectionOperationTransformBuilder.referencePoint()
Returns the reference point
License requirements: None. |
Point |
BoundaryTurnBlank.referencePoint()
Returns the reference point
License requirements: None. |
Point |
RoughFinishTurningBuilder.regionSelectionPoint()
Returns the Region Selection Point
License requirements: None. |
Point |
TurnRoughFinishTestCut.returnMovePoint()
Returns the test cut return move point
License requirements: None. |
Point |
TurnAvoidanceReturnBuilder.returnPoint()
Returns the return point
License requirements: None. |
Point |
IpwContainmentCurvesBuilder.specifyPoint()
Returns the specify point
License requirements: None. |
Point |
TurnAvoidanceStartBuilder.startPoint()
Returns the start point
License requirements: None. |
Point |
TeachmodeProfileMoveBuilder.startPoint()
Returns the start point
License requirements: None. |
Point |
TabPointDataBuilder.startPoint()
Returns the tab start point
License requirements: cam_base ("CAM BASE") . |
Point |
SplitSubopCommand.startPoint()
Returns the start point value
License requirements: None. |
Point |
FollowGeometryMoveBuilder.startPoint()
Returns the start location
License requirements: None. |
Point |
CenterlineDrillTurningBuilder.startPositionPoint()
Returns the start position point
License requirements: None. |
Point |
TurnRoughFinishTestCut.stopPoint()
Returns the test cut stop point
License requirements: None. |
Point |
TeachmodeProfileMoveBuilder.stopPoint()
Returns the stop point
License requirements: None. |
Point |
TabPointDataBuilder.tabThreadPoint()
Returns the tab thread point
License requirements: cam_base ("CAM BASE") . |
Point |
InspectionMeasurePointBuilder.targetPoint()
Returns the point
License requirements: None. |
Point |
InspectionLinearMoveToPointBuilder.targetPoint()
Returns the point
License requirements: None. |
Point |
InspectionLinear5axisMoveToPointBuilder.targetPoint()
Returns the point
License requirements: None. |
Point |
InspectionCmmCommandBuilder.targetPoint()
Returns the target point
License requirements: None. |
Point |
BoundaryTurnBlank.targetPoint()
Returns the target point
License requirements: None. |
Point |
ToolPathEditorBuilder.toPoint()
Returns the to point
License requirements: None. |
Point |
OperationTransformBuilder.toPoint()
Returns the to point
License requirements: None. |
Point |
InspectionOperationTransformBuilder.toPoint()
Returns the to point
License requirements: None. |
Modifier and Type | Method and Description |
---|---|
LaserControlPoint |
LaserProfileMove.createControlPoint(int headOrientType,
Point pointTag,
CartesianCoordinateSystem csysTag,
int processType,
boolean toggle,
NXObject udePathTag,
int pointType)
Create a new Laser Control Point
License requirements: cam_base ("CAM BASE") . |
void |
InterpolateAngle.insert(int inputIndex,
Point point,
NXObject view,
double leadAngle,
double tiltAngle)
Add a new item
License requirements: cam_base ("CAM BASE") . |
void |
InterpolateVector.insert(int inputIndex,
Point point,
NXObject view,
nxopen.Direction vector)
Add a new item
License requirements: cam_base ("CAM BASE") . |
void |
InterpolateAngle.modify(int index,
Point point,
double tiltAngle,
double leadAngle)
Modify an existing item by index
License requirements: cam_base ("CAM BASE") . |
void |
InterpolateVector.modify(int index,
Point point,
nxopen.Direction vector)
Modify an existing item by index
License requirements: cam_base ("CAM BASE") . |
void |
OperationTransformBuilder.setAngleEndPoint(Point angleEndPoint)
License requirements: cam_base ("CAM BASE") . |
void |
InspectionOperationTransformBuilder.setAngleEndPoint(Point angleEndPoint)
License requirements: insp_programming ("INSPECTION PROGRAMMING") . |
void |
OperationTransformBuilder.setAnglePivotPoint(Point anglePivotPoint)
License requirements: cam_base ("CAM BASE") . |
void |
InspectionOperationTransformBuilder.setAnglePivotPoint(Point anglePivotPoint)
License requirements: insp_programming ("INSPECTION PROGRAMMING") . |
void |
OperationTransformBuilder.setAngleStartPoint(Point angleStartPoint)
License requirements: cam_base ("CAM BASE") . |
void |
InspectionOperationTransformBuilder.setAngleStartPoint(Point angleStartPoint)
License requirements: insp_programming ("INSPECTION PROGRAMMING") . |
void |
OperationTransformBuilder.setArrayOriginPoint(Point arrayOriginPoint)
License requirements: cam_base ("CAM BASE") . |
void |
InspectionOperationTransformBuilder.setArrayOriginPoint(Point arrayOriginPoint)
License requirements: insp_programming ("INSPECTION PROGRAMMING") . |
void |
TurnProbeClearanceBuilder.setAxialPlanePoint(Point axialPlanePoint)
License requirements: cam_base ("CAM BASE") . |
void |
TurnAvoidanceClearanceBuilder.setAxialPlanePoint(Point axialPlanePoint)
License requirements: cam_base ("CAM BASE") . |
void |
LaserCutoutDefinition.setCenterPoint(Point newValue)
License requirements: cam_base ("CAM BASE") . |
void |
CircularAboutAxisMoveBuilder.setCenterPoint(Point location)
License requirements: None. |
void |
TurnFeatureGeomBuilder.setCutRegionSelectionPoint(Point cutRegionSelectionPoint)
License requirements: cam_base ("CAM BASE") . |
void |
CenterlineDrillTurningBuilder.setDepthEndPoint(Point endPoint)
License requirements: cam_base ("CAM BASE") . |
void |
VectorDistanceMoveBuilder.setEndPoint(Point location)
License requirements: None. |
void |
TabPointDataBuilder.setEndPoint(Point endPoint)
License requirements: cam_base ("CAM BASE") . |
void |
SplitSubopCommand.setEndPoint(Point endPoint)
License requirements: None. |
void |
FollowPartMoveBuilder.setEndPoint(Point location)
License requirements: cam_base ("CAM BASE") . |
void |
FollowCurveMoveBuilder.setEndPoint(Point location)
License requirements: cam_base ("CAM BASE") . |
void |
CircularAboutAxisMoveBuilder.setEndPoint(Point location)
License requirements: None. |
void |
TurnAvoidanceFromBuilder.setFromPoint(Point fromPoint)
License requirements: cam_base ("CAM BASE") . |
void |
TurnAvoidanceGohomeBuilder.setGohomePoint(Point gohomePoint)
License requirements: cam_base ("CAM BASE") . |
void |
InspectionCmmCommandBuilder.setHomePtPoint(Point homePtPoint)
License requirements: insp_programming ("INSPECTION PROGRAMMING") . |
void |
InspectionCmmCommandBuilder.setIntermediatePoint(Point intermediatePoint)
License requirements: insp_programming ("INSPECTION PROGRAMMING") . |
void |
OperationTransformBuilder.setLineEndPoint(Point lineEndPoint)
License requirements: cam_base ("CAM BASE") . |
void |
InspectionOperationTransformBuilder.setLineEndPoint(Point lineEndPoint)
License requirements: insp_programming ("INSPECTION PROGRAMMING") . |
void |
OperationTransformBuilder.setLinePoint(Point linePoint)
License requirements: cam_base ("CAM BASE") . |
void |
InspectionOperationTransformBuilder.setLinePoint(Point linePoint)
License requirements: insp_programming ("INSPECTION PROGRAMMING") . |
void |
OperationTransformBuilder.setLineStartPoint(Point lineStartPoint)
License requirements: cam_base ("CAM BASE") . |
void |
InspectionOperationTransformBuilder.setLineStartPoint(Point lineStartPoint)
License requirements: insp_programming ("INSPECTION PROGRAMMING") . |
void |
NcmTurnThreadBuilder.setLocalReturnFinishPoint(Point localReturnFinishPoint)
License requirements: cam_base ("CAM BASE") . |
void |
NcmTurnThreadBuilder.setLocalReturnPoint(Point localPoint)
License requirements: cam_base ("CAM BASE") . |
void |
NcmTurnThreadBuilder.setLocalReturnRoughPoint(Point localReturnRoughPoint)
License requirements: cam_base ("CAM BASE") . |
void |
FeatureRecognitionBuilder.setMachiningAccessDirection(Point focalPt,
boolean bIsTowardPt)
Set the machining access direction to toward or away from a point
License requirements: None. |
void |
FeatureRecognitionBuilder.setMachiningAccessDirection(Point tagPoint,
nxopen.Direction tagAxis,
boolean bIsTowardAxis)
Set the machining access direction to toward or away from an axis defined by a point and a vector
License requirements: None. |
void |
TurnRoughFinishTestCut.setMeasuringPoint(Point measuringPoint)
License requirements: cam_base ("CAM BASE") . |
void |
RotaryFinishGeomBuilder.setPartAxisPoint(Point point)
License requirements: cam_base ("CAM BASE") . |
void |
PartAxisBuilder.setPartAxisPoint(Point point)
License requirements: cam_base ("CAM BASE") . |
void |
MultiBladeGeomBuilder.setPartAxisPoint(Point point)
License requirements: cam_base ("CAM BASE") . |
void |
RoughTurningBuilder.setPartOffPositionPoint(Point partOffPositionPoint)
License requirements: cam_base ("CAM BASE") . |
void |
DmSpiralBuilder.setPatternCenterPoint(Point centerPoint)
License requirements: cam_base ("CAM BASE") . |
void |
DmBndBuilder.setPatternCenterPoint(Point centerPoint)
License requirements: cam_base ("CAM BASE") . |
void |
DmAmBuilder.setPatternCenterPoint(Point centerPoint)
License requirements: cam_base ("CAM BASE") . |
void |
AreaMillingNonSteepContainment.setPatternCenterPoint(Point centerPoint)
License requirements: cam_base ("CAM BASE") . |
void |
SpunOutlineGeom.setPlanesThroughPoints(Point[] points,
double[] incrementAngle,
int[] numberOfPlanes)
Define the section planes through points
License requirements: cam_base ("CAM BASE") . |
void |
WedmPointDefinitionBuilder.setPoint(Point newValue)
License requirements: cam_base ("CAM BASE") . |
void |
UdeParameter.setPoint(Point tagValue)
License requirements: cam_base ("CAM BASE") . |
void |
TurnRoughFinishLocalReturnBuilder.setPoint(Point localReturnPoint)
License requirements: cam_base ("CAM BASE") . |
void |
TurnProbeInspectPointMoveBuilder.setPoint(Point point)
License requirements: cam_base ("CAM BASE") . |
void |
TurnMoveToPointBuilder.setPoint(Point location)
License requirements: None. |
void |
TurnEngageRetractBuilder.setPoint(Point turnPoint)
License requirements: cam_base ("CAM BASE") . |
void |
TrimPoint.setPoint(Point point)
License requirements: cam_base ("CAM BASE") . |
void |
TrimPlane.setPoint(Point point)
License requirements: cam_base ("CAM BASE") . |
void |
ToolAxisTilt.setPoint(Point point)
License requirements: cam_base ("CAM BASE") . |
void |
ToolAxisBase.setPoint(Point pointTag)
License requirements: cam_base ("CAM BASE") . |
void |
TeachmodeLinearMoveBuilder.setPoint(Point newValue)
License requirements: cam_base ("CAM BASE") . |
void |
StopPosition.setPoint(Point stopAtPoint)
License requirements: cam_base ("CAM BASE") . |
void |
RotaryPolarMoveBuilder.setPoint(Point location)
License requirements: None. |
void |
RotaryPointMoveBuilder.setPoint(Point location)
License requirements: None. |
void |
ProjVecCiBuilder.setPoint(Point pointTag)
License requirements: cam_base ("CAM BASE") . |
void |
ProbeInspectSurfacePointMoveBuilder.setPoint(Point point)
License requirements: None. |
void |
ProbeInspectPointMoveBuilder.setPoint(Point point)
License requirements: cam_base ("CAM BASE") . |
void |
ProbeInspectBorebossMoveBuilder.setPoint(Point point)
License requirements: None. |
void |
ProbeCalibrateStylusMoveBuilder.setPoint(Point point)
License requirements: None. |
void |
ProbeCalibrateSphereMoveBuilder.setPoint(Point point)
License requirements: cam_base ("CAM BASE") . |
void |
ProbeCalibrateLengthMoveBuilder.setPoint(Point point)
License requirements: cam_base ("CAM BASE") . |
void |
NormalToToolAxisMoveBuilder.setPoint(Point location)
License requirements: None. |
void |
NcmAvoidancePointBuilder.setPoint(Point newValue)
License requirements: cam_base ("CAM BASE") . |
void |
MoveToPointBuilder.setPoint(Point location)
License requirements: None. |
void |
LaserPiercingPoint.setPoint(Point newValue)
License requirements: cam_base ("CAM BASE") . |
void |
LaserLinearMove.setPoint(Point newValue)
License requirements: cam_base ("CAM BASE") . |
void |
LaserControlPoint.setPoint(Point newValue)
License requirements: cam_base ("CAM BASE") . |
void |
InPathEventDataBuilder.setPoint(Point point)
License requirements: cam_base ("CAM BASE") . |
void |
InitialProfilePlunge.setPoint(Point point)
License requirements: cam_base ("CAM BASE") . |
void |
FirstPlunge.setPoint(Point point)
License requirements: cam_base ("CAM BASE") . |
void |
BoundaryTurnBlank.setPoint(Point headStockPosition)
License requirements: cam_base ("CAM BASE") . |
void |
NcmScEngRetBuilder.setPoints(Point[] points)
Sets engage/retract points
License requirements: cam_base ("CAM BASE") . |
void |
NcmPlanarEngRetBuilder.setPoints(Point[] points)
Sets engage/retract points
License requirements: cam_base ("CAM BASE") . |
void |
NcmPlanarBuilder.setPredrillPoints(Point[] predrillPoints)
The pre-drill points
License requirements: cam_base ("CAM BASE") . |
void |
TurnProbeClearanceBuilder.setRadialPlanePoint(Point radialPlanePoint)
License requirements: cam_base ("CAM BASE") . |
void |
TurnAvoidanceClearanceBuilder.setRadialPlanePoint(Point radialPlanePoint)
License requirements: cam_base ("CAM BASE") . |
void |
ToolPathEditorBuilder.setReferencePoint(Point refPoint)
License requirements: None. |
void |
OperationTransformBuilder.setReferencePoint(Point referencePoint)
License requirements: cam_base ("CAM BASE") . |
void |
InspectionOperationTransformBuilder.setReferencePoint(Point referencePoint)
License requirements: insp_programming ("INSPECTION PROGRAMMING") . |
void |
BoundaryTurnBlank.setReferencePoint(Point referencePoint)
License requirements: cam_base ("CAM BASE") . |
void |
RoughFinishTurningBuilder.setRegionSelectionPoint(Point cutRegionSelectionPoint)
License requirements: cam_base ("CAM BASE") . |
void |
NcmSubopBuilder.setRegionStartPoints(Point[] regionStartPoints)
Sets region start points
License requirements: cam_base ("CAM BASE") . |
void |
TurnRoughFinishTestCut.setReturnMovePoint(Point returnMovePoint)
License requirements: cam_base ("CAM BASE") . |
void |
TurnAvoidanceReturnBuilder.setReturnPoint(Point returnPoint)
License requirements: cam_base ("CAM BASE") . |
void |
IpwContainmentCurvesBuilder.setSpecifyPoint(Point point)
License requirements: cam_base ("CAM BASE") . |
void |
TurnAvoidanceStartBuilder.setStartPoint(Point startPoint)
License requirements: cam_base ("CAM BASE") . |
void |
TeachmodeProfileMoveBuilder.setStartPoint(Point newValue)
License requirements: cam_base ("CAM BASE") . |
void |
TabPointDataBuilder.setStartPoint(Point startPoint)
License requirements: cam_base ("CAM BASE") . |
void |
SplitSubopCommand.setStartPoint(Point startPoint)
License requirements: None. |
void |
FollowGeometryMoveBuilder.setStartPoint(Point location)
License requirements: cam_base ("CAM BASE") . |
void |
EditSubopCommand.setStartPoints(Point[] startPoint)
Set the start point value
License requirements: None. |
void |
CenterlineDrillTurningBuilder.setStartPositionPoint(Point startPositionSpecifyPoint)
License requirements: cam_base ("CAM BASE") . |
void |
TurnRoughFinishTestCut.setStopPoint(Point stopPoint)
License requirements: cam_base ("CAM BASE") . |
void |
TeachmodeProfileMoveBuilder.setStopPoint(Point newValue)
License requirements: cam_base ("CAM BASE") . |
void |
TabPointDataBuilder.setTabThreadPoint(Point threadPoint)
License requirements: cam_base ("CAM BASE") . |
void |
InspectionMeasurePointBuilder.setTargetPoint(Point point)
License requirements: None. |
void |
InspectionLinearMoveToPointBuilder.setTargetPoint(Point point)
License requirements: None. |
void |
InspectionLinear5axisMoveToPointBuilder.setTargetPoint(Point point)
License requirements: insp_programming ("INSPECTION PROGRAMMING") . |
void |
InspectionCmmCommandBuilder.setTargetPoint(Point targetPoint)
License requirements: insp_programming ("INSPECTION PROGRAMMING") . |
void |
BoundaryTurnBlank.setTargetPoint(Point targetPoint)
License requirements: cam_base ("CAM BASE") . |
void |
ToolPathEditorBuilder.setToPoint(Point toPoint)
License requirements: None. |
void |
OperationTransformBuilder.setToPoint(Point toPoint)
License requirements: cam_base ("CAM BASE") . |
void |
InspectionOperationTransformBuilder.setToPoint(Point toPoint)
License requirements: insp_programming ("INSPECTION PROGRAMMING") . |
Modifier and Type | Method and Description |
---|---|
Point[] |
PadChildBuilder.getHoleCenters()
Gets the hole centers of the die pad.
|
Point |
TrimLineDevelopmentBuilder.limitPoint1()
Returns the first limit point
License requirements: None. |
Point |
TrimLineDevelopmentBuilder.limitPoint2()
Returns the last limit point
License requirements: None. |
Point |
PressureSystemChildBuilder.point()
Returns the location of the pressure system.
|
Point |
PointChildBuilder.point()
Returns the location of the point.
|
Point |
FormTaskBuilder.pointInRegion()
Returns the point in region of the form task.
|
Point |
FlangeTaskBuilder.pointInRegion()
Returns the keep point in the region of the flange task
License requirements: die_engineering ("DIE ENGINEERING") . |
Point |
FillBuilder.pointInRegion()
Returns the point in region of the area fill
License requirements: die_engineering ("DIE ENGINEERING") . |
Point |
AddSurfBuilder.refPoint()
Returns the keep point for trimming.
|
Point |
TrimLineDevelopmentBuilder.regionPoint()
Returns the point in product region
License requirements: None. |
Point |
AddendumSectionBuilder.sectionPoint()
Returns the origin point where the section will be located.
|
Point |
DrawBeadTaperBuilder.taperPoint()
Returns the point used for defining the radius value of the spherical taper.
|
Modifier and Type | Method and Description |
---|---|
void |
PadChildBuilder.setHoleCenters(Point[] holes)
Sets the hole centers of the die pad.
|
void |
TrimLineDevelopmentBuilder.setLimitPoint1(Point point)
License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard") . |
void |
TrimLineDevelopmentBuilder.setLimitPoint2(Point point)
License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard") . |
void |
PressureSystemChildBuilder.setPoint(Point point)
Sets the location of the pressure system.
|
void |
PointChildBuilder.setPoint(Point point)
Sets the location of the point.
|
void |
FormTaskBuilder.setPointInRegion(Point pointInRegion)
Sets the point in region of the form task.
|
void |
FlangeTaskBuilder.setPointInRegion(Point pointInRegion)
Sets the keep point in the region of the flange task
License requirements: die_engineering ("DIE ENGINEERING") . |
void |
FillBuilder.setPointInRegion(Point pointInRegion)
Sets the point in region of the area fill
License requirements: die_engineering ("DIE ENGINEERING") . |
void |
AddSurfBuilder.setRefPoint(Point point0)
License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard") . |
void |
TrimLineDevelopmentBuilder.setRegionPoint(Point regionPoint)
License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard") . |
void |
AddendumSectionBuilder.setSectionPoint(Point sectionPoint)
License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard") . |
void |
DrawBeadTaperBuilder.setTaperPoint(Point taperPoint)
License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard") . |
void |
Tip.transformDiePoint(Point point)
Transforms the point from die position to product position.
|
Modifier and Type | Method and Description |
---|---|
Point |
LightBuilder.destinationPosition()
Returns the destination position - only applicable to spot light types
License requirements: None. |
Point |
Background.domeOrigin()
Returns the origin
License requirements: None. |
Point |
ImageBaseBuilder.imageReferencePoint1()
Returns the image reference point1.
|
Point |
ImageBaseBuilder.imageReferencePoint2()
Returns the image reference point2.
|
Point |
ImageBaseBuilder.imageReferencePoint3()
Returns the image reference point3.
|
Point |
ImageBaseBuilder.modelReferencePoint1()
Returns the model reference point1.
|
Point |
ImageBaseBuilder.modelReferencePoint2()
Returns the model reference point2.
|
Point |
ImageBaseBuilder.modelReferencePoint3()
Returns the model reference point3.
|
Point |
DecalBuilder.origin()
Returns the origin
License requirements: None. |
Point |
LightBuilder.sourcePosition()
Returns the source position - only applicable to spot and point light types
License requirements: None. |
Point |
ImageBaseBuilder.userBasePoint()
Returns the user defined base point.
|
Point |
ImageBaseBuilder.userInsertionPoint()
Returns the user defined insertion point
License requirements: None. |
Modifier and Type | Method and Description |
---|---|
void |
LightBuilder.setDestinationPosition(Point destinationPosition)
License requirements: None. |
void |
Background.setDomeOrigin(Point origin)
License requirements: None. |
void |
ImageBaseBuilder.setImageReferencePoint1(Point imageReferencePoint1)
License requirements: None. |
void |
ImageBaseBuilder.setImageReferencePoint2(Point imageReferencePoint2)
License requirements: None. |
void |
ImageBaseBuilder.setImageReferencePoint3(Point imageReferencePoint3)
License requirements: None. |
void |
ImageBaseBuilder.setModelReferencePoint1(Point modelReferencePoint1)
License requirements: None. |
void |
ImageBaseBuilder.setModelReferencePoint2(Point modelReferencePoint2)
License requirements: None. |
void |
ImageBaseBuilder.setModelReferencePoint3(Point modelReferencePoint3)
License requirements: None. |
void |
DecalBuilder.setOrigin(Point origin)
License requirements: None. |
void |
LightBuilder.setSourcePosition(Point sourcePosition)
License requirements: None. |
void |
ImageBaseBuilder.setUserBasePoint(Point basePoint)
License requirements: None. |
void |
ImageBaseBuilder.setUserInsertionPoint(Point insertPoint)
License requirements: None. |
Modifier and Type | Method and Description |
---|---|
Point |
MoveToDrawingViewBuilder.selectPoint()
Returns the select point to calculate the new created drawing view's reference point
License requirements: None. |
Modifier and Type | Method and Description |
---|---|
void |
MoveToDrawingViewBuilder.setSelectPoint(Point selectPoint)
License requirements: nx_layout ("NX Layout") . |
Modifier and Type | Method and Description |
---|---|
Point |
HalfSectionLineBuilder.bendLocation()
Deprecated.
Deprecated in NX10.0.0. Use
Drawings.SectionViewBuilder#sectionLineSegments instead.
|
Point |
ViewBoundaryBuilder.boundaryPoint1()
Returns the first corner point
License requirements: None. |
Point |
RefineDisplayBuilder.boundaryPoint1()
Returns
the boundary point1 in drawing coordinates.
|
Point |
DetailViewBuilder.boundaryPoint1()
Returns
the first boundary point.
|
Point |
ViewBoundaryBuilder.boundaryPoint2()
Returns the second corner point
License requirements: None. |
Point |
RefineDisplayBuilder.boundaryPoint2()
Returns
the boundary point2 in drawing coordinates.
|
Point |
DetailViewBuilder.boundaryPoint2()
Returns
the second boundary point.
|
Point |
BrokenViewBuilder.breakLine1Anchor()
Returns the object specifying the position of the first break line
License requirements: None. |
Point |
BrokenViewBuilder.breakLine1ModelAnchor()
Returns the object specifying the position of the first break line
License requirements: None. |
Point |
BrokenViewBuilder.breakLine2Anchor()
Returns the object specifying the position of the second break line.
|
Point |
BrokenViewBuilder.breakLine2ModelAnchor()
Returns the object specifying the position of the second break line.
|
Point |
HalfSectionLineBuilder.cutLocation()
Deprecated.
Deprecated in NX10.0.0. Use
Drawings.SectionViewBuilder#sectionLineSegments instead.
|
Point |
OrientedSectionLineBuilder.cutLocation3D()
Deprecated.
Deprecated in NX10.0.0. This API is not supported yet and should not be used.
|
Point |
SteppedSectionLineBuilder.endLocation1()
Deprecated.
Deprecated in NX10.0.0. Use
Drawings.SectionViewBuilder#sectionLineSegments instead.
|
Point |
RevolvedSectionLineBuilder.endLocation1()
Deprecated.
Deprecated in NX10.0.0. This API is not supported yet and should not be used.
|
Point |
PointToPointSectionLineBuilder.endLocation1()
Deprecated.
Deprecated in NX10.0.0. Use
Drawings.SectionViewBuilder#sectionLineSegments instead.
|
Point |
PointAndAngleSectionLineBuilder.endLocation1()
Deprecated.
Deprecated in NX10.0.0. This API is not supported yet and should not be used.
|
Point |
OrientedSectionLineBuilder.endLocation1()
Deprecated.
Deprecated in NX10.0.0. This API is not supported yet and should not be used.
|
Point |
HalfSectionLineBuilder.endLocation1()
Deprecated.
Deprecated in NX10.0.0. Use
Drawings.SectionViewBuilder#sectionLineSegments instead.
|
Point |
SteppedSectionLineBuilder.endLocation2()
Deprecated.
Deprecated in NX10.0.0. Use
Drawings.SectionViewBuilder#sectionLineSegments instead.
|
Point |
RevolvedSectionLineBuilder.endLocation2()
Deprecated.
Deprecated in NX10.0.0. This API is not supported yet and should not be used.
|
Point |
PointToPointSectionLineBuilder.endLocation2()
Deprecated.
Deprecated in NX10.0.0. Use
Drawings.SectionViewBuilder#sectionLineSegments instead.
|
Point |
PointAndAngleSectionLineBuilder.endLocation2()
Deprecated.
Deprecated in NX10.0.0. This API is not supported yet and should not be used.
|
Point |
OrientedSectionLineBuilder.endLocation2()
Deprecated.
Deprecated in NX10.0.0. This API is not supported yet and should not be used.
|
Point |
DrawingRegionBuilder.origin()
Returns the origin
License requirements: None. |
Point |
SectionLineSegmentPointBuilder.point()
Returns the section line segment
Point
License requirements: drafting ("DRAFTING") Created in NX10.0.0 |
Point |
SectionLineSegmentBuilder.point()
Returns the point
License requirements: None. |
Point |
SectionLineSegmentsBuilder.rotationPoint()
Returns the rotation point
License requirements: None. |
Point |
RevolvedSectionLineBuilder.rotationPoint()
Deprecated.
Deprecated in NX10.0.0. Use
Drawings.SectionLineSegmentsBuilder#rotationPoint
|
Modifier and Type | Method and Description |
---|---|
SectionLineSegmentPointBuilder |
SectionLineSegmentPointListBuilder.addCutSegment(Point location)
Creates a new
SectionLineSegmentPointBuilder object
License requirements: None. |
SectionLineSegmentPointBuilder |
SectionLineSegmentPointListBuilder.addCutSegment(Point location,
SectionLineSegmentPointBuilder referencedCutSegment)
Creates a new
SectionLineSegmentPointBuilder
In case of point to point section line ,new segment is added at location prior to reference cut segment specified. |
void |
SectionLineSegmentPointListBuilder.moveSegment(SectionLineSegmentPointBuilder point,
Point pointspecified)
Moves a given
SectionLineSegmentPointBuilder object from the list
License requirements: drafting ("DRAFTING") Created in NX10.0.0 |
void |
HalfSectionLineBuilder.setBendLocation(Point bendLocation)
Deprecated.
Deprecated in NX10.0.0. Use
Drawings.SectionViewBuilder#sectionLineSegments instead.
|
void |
ViewBoundaryBuilder.setBoundaryPoint1(Point boundaryPoint1)
License requirements: nx_layout ("NX Layout") . |
void |
RefineDisplayBuilder.setBoundaryPoint1(Point boundaryPoint1)
License requirements: drafting ("DRAFTING") . |
void |
DetailViewBuilder.setBoundaryPoint1(Point boundaryPoint1)
License requirements: drafting ("DRAFTING") . |
void |
ViewBoundaryBuilder.setBoundaryPoint2(Point boundaryPoint2)
License requirements: nx_layout ("NX Layout") . |
void |
RefineDisplayBuilder.setBoundaryPoint2(Point boundaryPoint2)
License requirements: drafting ("DRAFTING") . |
void |
DetailViewBuilder.setBoundaryPoint2(Point boundaryPoint2)
License requirements: drafting ("DRAFTING") . |
void |
BrokenViewBuilder.setBreakLine1Anchor(Point anchor1)
License requirements: None. |
void |
BrokenViewBuilder.setBreakLine1ModelAnchor(Point anchor1)
License requirements: None. |
void |
BrokenViewBuilder.setBreakLine2Anchor(Point anchor2)
License requirements: None. |
void |
BrokenViewBuilder.setBreakLine2ModelAnchor(Point anchor2)
License requirements: None. |
void |
HalfSectionLineBuilder.setCutLocation(Point cutLocation)
Deprecated.
Deprecated in NX10.0.0. Use
Drawings.SectionViewBuilder#sectionLineSegments instead.
|
void |
OrientedSectionLineBuilder.setCutLocation3D(Point cutLocation3D)
Deprecated.
Deprecated in NX10.0.0. This API is not supported yet and should not be used.
|
void |
SteppedSectionLineBuilder.setEndLocation1(Point endLocation1)
Deprecated.
Deprecated in NX10.0.0. Use
Drawings.SectionViewBuilder#sectionLineSegments instead.
|
void |
RevolvedSectionLineBuilder.setEndLocation1(Point endLocation1)
Deprecated.
Deprecated in NX10.0.0. This API is not supported yet and should not be used.
|
void |
PointToPointSectionLineBuilder.setEndLocation1(Point endLocation1)
Deprecated.
Deprecated in NX10.0.0. Use
Drawings.SectionViewBuilder#sectionLineSegments instead.
|
void |
PointAndAngleSectionLineBuilder.setEndLocation1(Point endLocation1)
Deprecated.
Deprecated in NX10.0.0. This API is not supported yet and should not be used.
|
void |
OrientedSectionLineBuilder.setEndLocation1(Point endLocation1)
Deprecated.
Deprecated in NX10.0.0. This API is not supported yet and should not be used.
|
void |
HalfSectionLineBuilder.setEndLocation1(Point endLocation1)
Deprecated.
Deprecated in NX10.0.0. Use
Drawings.SectionViewBuilder#sectionLineSegments instead.
|
void |
SteppedSectionLineBuilder.setEndLocation2(Point endLocation2)
Deprecated.
Deprecated in NX10.0.0. Use
Drawings.SectionViewBuilder#sectionLineSegments instead.
|
void |
RevolvedSectionLineBuilder.setEndLocation2(Point endLocation2)
Deprecated.
Deprecated in NX10.0.0. This API is not supported yet and should not be used.
|
void |
PointToPointSectionLineBuilder.setEndLocation2(Point endLocation2)
Deprecated.
Deprecated in NX10.0.0. Use
Drawings.SectionViewBuilder#sectionLineSegments instead.
|
void |
PointAndAngleSectionLineBuilder.setEndLocation2(Point endLocation2)
Deprecated.
Deprecated in NX10.0.0. This API is not supported yet and should not be used.
|
void |
OrientedSectionLineBuilder.setEndLocation2(Point endLocation2)
Deprecated.
Deprecated in NX10.0.0. This API is not supported yet and should not be used.
|
void |
DrawingRegionBuilder.setOrigin(Point origin)
License requirements: nx_drawing_auto ("NX Drawing Automation") . |
void |
SectionLineSegmentPointBuilder.setPoint(Point point)
License requirements: drafting ("DRAFTING") . |
void |
SectionLineSegmentBuilder.setPoint(Point point)
License requirements: drafting ("DRAFTING") . |
void |
SectionLineSegmentsBuilder.setRotationPoint(Point rotationPointTag)
License requirements: None. |
void |
RevolvedSectionLineBuilder.setRotationPoint(Point rotationPoint)
Deprecated.
Deprecated in NX10.0.0. Use
Drawings.SectionLineSegmentsBuilder#setRotationPoint
|
Modifier and Type | Method and Description |
---|---|
Point |
BestFitAlignBuilder.rotateCenter()
Returns the rotation center
License requirements: None. |
Point |
SewFacetBodyBuilder.vertex1()
Returns the first vertex used to define the range
License requirements: None. |
Point |
BridgeFacetBodyBuilder.vertex1Range1()
Returns the first vertex used to define the range on the the first facet body
License requirements: None. |
Point |
BridgeFacetBodyBuilder.vertex1Range2()
Returns the first vertex used to defind the range on the second facet body
License requirements: None. |
Point |
SewFacetBodyBuilder.vertex2()
Returns the second vertex used to define the range
License requirements: None. |
Point |
BridgeFacetBodyBuilder.vertex2Range1()
Returns the second vertex used to define the range on the first facet body
License requirements: None. |
Point |
BridgeFacetBodyBuilder.vertex2Range2()
Returns the second vertex used to defind the range on the second facet body
License requirements: None. |
Modifier and Type | Method and Description |
---|---|
void |
BestFitAlignBuilder.setRotateCenter(Point rotateCenter)
Sets the rotation center
License requirements: solid_modeling ("SOLIDS MODELING") OR nx_freeform_1 ("basic freeform modeling") . |
void |
SewFacetBodyBuilder.setVertex1(Point vertexPoint1)
License requirements: studio_free_form ("STUDIO FREE FORM") OR die_engineering ("DIE ENGINEERING") . |
void |
BridgeFacetBodyBuilder.setVertex1Range1(Point vertex1Range1)
License requirements: None. |
void |
BridgeFacetBodyBuilder.setVertex1Range2(Point vertex1Range2)
License requirements: None. |
void |
SewFacetBodyBuilder.setVertex2(Point vertexPoint2)
License requirements: studio_free_form ("STUDIO FREE FORM") OR die_engineering ("DIE ENGINEERING") . |
void |
BridgeFacetBodyBuilder.setVertex2Range1(Point vertex2Range1)
License requirements: None. |
void |
BridgeFacetBodyBuilder.setVertex2Range2(Point vertex2Range2)
License requirements: None. |
Modifier and Type | Field and Description |
---|---|
Point |
FlatPattern.ObjectDataCsys.flatPatternObject
Point in the flat pattern
|
Point[] |
EdgeBlendBuilder.VariableRadiusData.smartPoints
Array of smart points defining variable radius
|
Point[] |
EdgeBlendBuilder.VariableRadiusDataNewData.smartPoints
Array of smart points defining variable radius
|
Modifier and Type | Method and Description |
---|---|
Point |
GeneralConicBuilder.anchorPoint()
Returns the anchor point.
|
Point |
StudioXformBuilder.centerPoint()
Deprecated.
Deprecated in NX8.5.0. Use
StudioXformBuilderEx instead.
|
Point |
SphereBuilder.centerPoint()
Returns the center point of the Sphere.
|
Point |
OffsetEmbossBuilder.centerPoint()
Returns the center point:
An existing point on the input sheet body is selected as the reference from which the feature is defined.
|
Point |
BlendCornerBuilder.centerPoint()
Returns the center point.
|
Point |
AestheticFaceBlendBuilder.constrainedEndPoint1()
Returns the end point1
License requirements: None. |
Point |
AestheticFaceBlendBuilder.constrainedEndPoint2()
Returns the end point2
License requirements: None. |
Point |
AestheticFaceBlendBuilder.constrainedStartPoint1()
Returns the start point1
License requirements: None. |
Point |
AestheticFaceBlendBuilder.constrainedStartPoint2()
Returns the start point2
License requirements: None. |
Point[] |
RapidSurfaceBuilder.createNodePoints()
Creates points to record every mesh node
License requirements: studio_free_form ("STUDIO FREE FORM") . |
Point |
FaceBlendBuilder.endLimitPoint()
Returns the end limit point
License requirements: None. |
Point |
GeodesicLineBuilder.endPoint()
Returns the end point of line
License requirements: None. |
Point |
GeneralConicBuilder.endPoint()
Returns the end point.
|
Point |
BridgeCurveBuilder.endReferencePoint()
Deprecated.
Deprecated in NX8.5.0. Use
BridgeCurveBuilderEx instead.
|
Point |
MoveFaceBuilder.fromPoint()
Returns the from point in point to point option in move face, don't use it until nx502
License requirements: None. |
Point |
FillHoleBuilder.fullnessPoint()
Returns the point at corner A.
|
Point |
HumanBuilder.getBarrierPoint()
Gets barrier point for active reach, returns null if there is no barrier
License requirements: solid_modeling ("SOLIDS MODELING"), ug_human ("Human Modelling") . |
Point |
FitCurveBuilder.getFinalTargetPoint(int index)
Returns the target point that are finally used for fitting
License requirements: features_modeling ("FEATURES MODELING") . |
Point |
HumanBuilder.getHandGoalPoint(HumanData.SideType side)
Gets hand goal point for active reach, returns null if the hand goal type is not point
License requirements: solid_modeling ("SOLIDS MODELING"), ug_human ("Human Modelling") . |
Point |
RapidSurfaceBuilder.getNode(int nodeIndex)
Gets a node in the current curve network
License requirements: studio_free_form ("STUDIO FREE FORM") . |
Point |
SphericalCornerBuilder.helpPoint()
Returns the Help point acquired from the first face set selection
License requirements: None. |
Point |
FaceBlendBuilder.helpPoint()
Returns the face blend help point
License requirements: None. |
Point |
TabNoteCfgBuilder.insertionPoint()
Returns the insertion point
License requirements: None. |
Point |
GeneralConicBuilder.interiorPoint1()
Returns the first interior point.
|
Point |
GeneralConicBuilder.interiorPoint2()
Returns the second interior point.
|
Point |
GeneralConicBuilder.interiorPoint3()
Returns the third interior point.
|
Point |
ShelfBuilder.limitPoint1()
Returns the limit point1
License requirements: None. |
Point |
ShelfBuilder.limitPoint2()
Returns the limit point2
License requirements: None. |
Point |
VariableRadiusPointsBuilder.location()
Returns the location of variable radius point
License requirements: None. |
Point |
PointSetBuilder.patternLimitsEndPoint()
Returns the ending diagonal point of the pattern.
|
Point |
PointSetBuilder.patternLimitsStartPoint()
Returns the starting diagonal point of the pattern.
|
Point |
StudioXformBuilder.pivotPoint()
Deprecated.
Deprecated in NX8.5.0. Use
StudioXformBuilderEx instead.
|
Point |
MoveFaceBuilder.pivotPoint()
Returns the pivot point in axis to axis option in move face, don't use it until nx502
License requirements: None. |
Point |
ScaleBuilder.point()
Returns the point as
Point
License requirements: None. |
Point |
GlobalShapingPointOffsetBuilder.point()
Returns the target point
License requirements: None. |
Point |
GeometricConstraintData.point()
Returns the point.
|
Point |
GeodesicPointBuilder.point()
Returns the geodesic point
License requirements: None. |
Point |
DatumAxisBuilder.point()
Returns the point.
|
Point |
FitSurfaceBuilder.point1()
Returns the first point of the boundary
License requirements: None. |
Point |
DatumAxisBuilder.point1()
Returns the first point.
|
Point |
FitSurfaceBuilder.point2()
Returns the second point of the boundary
License requirements: None. |
Point |
DatumAxisBuilder.point2()
Returns the second point.
|
Point |
FitSurfaceBuilder.point3()
Returns the third point of the boundary
License requirements: None. |
Point |
FitSurfaceBuilder.point4()
Returns the fourth point of the boundary
License requirements: None. |
Point |
VariableOffsetBuilder.pointA()
Returns the point at corner A.
|
Point |
VariableOffsetBuilder.pointB()
Returns the point at corner B.
|
Point |
VariableOffsetBuilder.pointC()
Returns the point at corner C.
|
Point |
VariableOffsetBuilder.pointD()
Returns the point at corner D.
|
Point |
OffsetCurveBuilder.pointOnOffsetPlane()
Returns the point on offset plane
License requirements: None. |
Point |
ProjectCurveBuilder.pointToProjectToward()
Returns the point to project toward
License requirements: None. |
Point |
GeodesicProjectBuilder.projectPoint()
Returns the point to project
License requirements: None. |
Point |
SectionCurveBuilder.radialPlanePoint()
Returns the point for radial plane type
License requirements: None. |
Point |
NSidedSurfaceBuilder.rectanglePointFirst()
Returns the first rectangle point.
|
Point |
NSidedSurfaceBuilder.rectanglePointSecond()
Returns the second rectangle point.
|
Point |
NSidedSurfaceBuilder.rectanglePointThird()
Returns the third rectangle point.
|
Point |
MirrorBuilder.referencePoint()
Deprecated.
Deprecated in NX9.0.0. Use
GeometricUtilities.PatternReferencePointServiceBuilder#point instead.
|
Point |
ProjectCurveBuilder.referencePointForEqualArcLength()
Returns the reference point for equal arc length
License requirements: None. |
Point |
StudioXformBuilderEx.rotatingPivotPoint()
Returns the rotating pivot point
License requirements: None. |
Point |
StudioXformBuilderEx.scalingCenterPoint()
Returns the scaling center point
License requirements: None. |
Point |
PatchOpeningsBuilder.shelfPoint1()
Returns the first shelf point, used only when type is
Features.PatchOpeningsBuilder.Types#JOGGLE
License requirements: None. |
Point |
PatchOpeningsBuilder.shelfPoint2()
Returns the second shelf point, used only when type is
Features.PatchOpeningsBuilder.Types#JOGGLE
License requirements: None. |
Point |
SmoothRangeBuilder.smoothRangeFrom()
Returns the start point of smoothing range
License requirements: None. |
Point |
SmoothRangeBuilder.smoothRangeTo()
Returns the end point of smoothing range
License requirements: None. |
Point |
FaceBlendBuilder.startLimitPoint()
Returns the start limit point
License requirements: None. |
Point |
GeodesicLineBuilder.startPoint()
Returns the start point of line
License requirements: None. |
Point |
GeneralConicBuilder.startPoint()
Returns the start point.
|
Point |
BridgeCurveBuilder.startReferencePoint()
Deprecated.
Deprecated in NX8.5.0. Use
BridgeCurveBuilderEx instead.
|
Point |
GlobalShapingBuilder.targetPoint()
Returns the target point
License requirements: None. |
Point |
TangentBuilder.throughPoint()
Returns the through point
License requirements: None. |
Point |
PerpendicularBuilder.throughPoint()
Returns the through point
License requirements: None. |
Point |
ParallelBuilder.throughPoint()
Returns the through point.
|
Point |
MoveFaceBuilder.toPoint()
Returns the to point in point to point option in move face, don't use it until nx502
License requirements: None. |
Point |
GuidedExtensionBuilderEx.vectorOrigin()
Returns the origin of the reference vector
License requirements: solid_modeling ("SOLIDS MODELING") OR nx_freeform_2 ("advanced freeform modeling") OR ug_mold_design ("UG MOLD") OR die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard") . |
Modifier and Type | Method and Description |
---|---|
int |
EdgeBlendBuilder.addVariablePointData(Edge edge,
String parameter,
String radius,
String centerValue,
String rhoValue,
Point smartPoint,
boolean isExternal,
boolean isArclength)
Add an edge blend variable radius data for an edge in the edge blend
License requirements: solid_modeling ("SOLIDS MODELING") . |
int |
EdgeBlendBuilder.addVariableRadiusData(Edge edge,
double parameter,
String radius,
Point smartPoint,
boolean isExternal)
Deprecated.
Deprecated in NX6.0.0. Use
Features.EdgeBlendBuilder#addVariableRadiusDataNew instead.
|
int |
EdgeBlendBuilder.addVariableRadiusDataNew(Edge edge,
String parameter,
String radius,
Point smartPoint,
boolean isExternal)
Add an edge blend variable radius data for an edge in the edge blend
Note: This ja will always create arclength parameter
License requirements: solid_modeling ("SOLIDS MODELING") . |
int |
EdgeBlendBuilder.addVariableRadiusDataNew(Edge edge,
String parameter,
String radius,
Point smartPoint,
boolean isExternal,
boolean isArclength)
Add an edge blend variable radius data for an edge in the edge blend
License requirements: solid_modeling ("SOLIDS MODELING") . |
void |
RapidSurfaceBuilder.deleteNode(Point point)
Deletes node
License requirements: studio_free_form ("STUDIO FREE FORM") . |
void |
FitCurveBuilder.deleteTargetPoints(Point[] points)
Deletes target points
License requirements: features_modeling ("FEATURES MODELING") . |
void |
EdgeBlendBuilder.editVariablePointData(Edge edge,
int vrIndex,
String parameter,
String radius,
String centerValue,
String rhoValue,
Point smartPoint,
boolean isExternal,
boolean isArclength)
Edit an edge blend variable radius data for an edge in the edge blend
License requirements: solid_modeling ("SOLIDS MODELING") . |
void |
EdgeBlendBuilder.editVariableRadiusData(Edge edge,
int vrIndex,
double parameter,
String radius,
Point smartPoint,
boolean isExternal)
Deprecated.
Deprecated in NX6.0.0. Use
Features.EdgeBlendBuilder#editVariableRadiusDataNew instead.
|
void |
EdgeBlendBuilder.editVariableRadiusDataNew(Edge edge,
int vrIndex,
String parameter,
String radius,
Point smartPoint,
boolean isExternal)
Edit an edge blend variable radius data for an edge in the edge blend
License requirements: solid_modeling ("SOLIDS MODELING") . |
void |
EdgeBlendBuilder.editVariableRadiusDataNew(Edge edge,
int vrIndex,
String parameter,
String radius,
Point smartPoint,
boolean isExternal,
boolean isArclength)
Edit an edge blend variable radius data for an edge in the edge blend
License requirements: solid_modeling ("SOLIDS MODELING") . |
void |
FitCurveBuilder.makeConstraint(Point point)
In case of point targets, makes a target point a positional constraint.
|
void |
RapidSurfaceBuilder.moveNode(Point point,
Point3d newPosition)
Moves node
License requirements: studio_free_form ("STUDIO FREE FORM") . |
void |
FitCurveBuilder.removeConstraint(Point point)
Makes existing positional constraint a free target point
License requirements: features_modeling ("FEATURES MODELING") . |
void |
IsoparametricCurvesBuilder.setActivePoints(Point[] points,
Point masterPoint)
Sets key points that are selected or will be moved
License requirements: solid_modeling ("SOLIDS MODELING") . |
void |
IsoparametricCurvesBuilder.setActivePoints(Point[] points,
Point masterPoint)
Sets key points that are selected or will be moved
License requirements: solid_modeling ("SOLIDS MODELING") . |
void |
GeneralConicBuilder.setAnchorPoint(Point anchorPoint)
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING") . |
void |
HumanBuilder.setBarrierPoint(Point barrierPoint)
Sets barrier point active reach, the human will be hold by the position of point in active reach
License requirements: solid_modeling ("SOLIDS MODELING"), ug_human ("Human Modelling") . |
void |
StudioXformBuilder.setCenterPoint(Point centerPoint)
Deprecated.
Deprecated in NX8.5.0. Use
StudioXformBuilderEx instead.
|
void |
SphereBuilder.setCenterPoint(Point centerPoint)
License requirements: solid_modeling ("SOLIDS MODELING") . |
void |
OffsetEmbossBuilder.setCenterPoint(Point point)
License requirements: solid_modeling ("SOLIDS MODELING") . |
void |
BlendCornerBuilder.setCenterPoint(Point centerPoint)
License requirements: nx_freeform_2 ("advanced freeform modeling") . |
void |
AestheticFaceBlendBuilder.setConstrainedEndPoint1(Point endPoint1)
License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM") . |
void |
AestheticFaceBlendBuilder.setConstrainedEndPoint2(Point endPoint2)
License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM") . |
void |
AestheticFaceBlendBuilder.setConstrainedStartPoint1(Point startPoint1)
License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM") . |
void |
AestheticFaceBlendBuilder.setConstrainedStartPoint2(Point startPoint2)
License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM") . |
void |
FaceBlendBuilder.setEndLimitPoint(Point point)
License requirements: solid_modeling ("SOLIDS MODELING") . |
void |
GeodesicLineBuilder.setEndPoint(Point endPoint)
License requirements: solid_modeling ("SOLIDS MODELING") . |
void |
GeneralConicBuilder.setEndPoint(Point endPoint)
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING") . |
void |
BridgeCurveBuilder.setEndReferencePoint(Point endReferencePoint)
Deprecated.
Deprecated in NX8.5.0. Use
BridgeCurveBuilderEx instead.
|
void |
MoveFaceBuilder.setFromPoint(Point fromPoint)
License requirements: solid_modeling ("SOLIDS MODELING") . |
void |
FillHoleBuilder.setFullnessPoint(Point point)
License requirements: nx_freeform_1 ("basic freeform modeling"), solid_modeling ("SOLIDS MODELING") . |
void |
HumanBuilder.setHandGoalPoint(HumanData.SideType side,
Point goalPoint)
Sets hand goal point for active reach, the hand goal type should be point
License requirements: solid_modeling ("SOLIDS MODELING"), ug_human ("Human Modelling") . |
void |
SphericalCornerBuilder.setHelpPoint(Point helpPoint)
License requirements: solid_modeling ("SOLIDS MODELING") . |
void |
FaceBlendBuilder.setHelpPoint(Point helpPoint)
License requirements: solid_modeling ("SOLIDS MODELING") . |
void |
TabNoteCfgBuilder.setInsertionPoint(Point insertionPoint)
License requirements: nx_ship_concept ("Ship Concept") . |
void |
GeneralConicBuilder.setInteriorPoint1(Point interiorPoint1)
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING") . |
void |
GeneralConicBuilder.setInteriorPoint2(Point interiorPoint2)
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING") . |
void |
GeneralConicBuilder.setInteriorPoint3(Point interiorPoint3)
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING") . |
void |
ShelfBuilder.setLimitPoint1(Point limitPoint1)
License requirements: nx_aero_design (" NX Aero Design") . |
void |
ShelfBuilder.setLimitPoint2(Point limitPoint2)
License requirements: nx_aero_design (" NX Aero Design") . |
void |
VariableRadiusPointsBuilder.setLocation(Point location)
License requirements: solid_modeling ("SOLIDS MODELING") . |
void |
PointSetBuilder.setPatternLimitsEndPoint(Point patternLimitsEndPoint)
License requirements: solid_modeling ("SOLIDS MODELING") . |
void |
PointSetBuilder.setPatternLimitsStartPoint(Point patternLimitsStartPoint)
License requirements: solid_modeling ("SOLIDS MODELING") . |
void |
StudioXformBuilder.setPivotPoint(Point pivotPoint)
Deprecated.
Deprecated in NX8.5.0. Use
StudioXformBuilderEx instead.
|
void |
MoveFaceBuilder.setPivotPoint(Point pivotPoint)
License requirements: solid_modeling ("SOLIDS MODELING") . |
void |
ScaleBuilder.setPoint(Point point)
License requirements: solid_modeling ("SOLIDS MODELING") . |
void |
GlobalShapingPointOffsetBuilder.setPoint(Point point)
License requirements: solid_modeling ("SOLIDS MODELING") . |
void |
GeometricConstraintData.setPoint(Point point)
License requirements: features_modeling ("FEATURES MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") . |
void |
GeodesicPointBuilder.setPoint(Point point)
License requirements: solid_modeling ("SOLIDS MODELING") . |
void |
DatumAxisBuilder.setPoint(Point point)
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT") . |
void |
FitSurfaceBuilder.setPoint1(Point point1)
License requirements: nx_freeform_2 ("advanced freeform modeling") . |
void |
DatumAxisBuilder.setPoint1(Point point1)
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT") . |
void |
FitSurfaceBuilder.setPoint2(Point point)
License requirements: nx_freeform_2 ("advanced freeform modeling") . |
void |
DatumAxisBuilder.setPoint2(Point point2)
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT") . |
void |
FitSurfaceBuilder.setPoint3(Point point)
License requirements: nx_freeform_2 ("advanced freeform modeling") . |
void |
FitSurfaceBuilder.setPoint4(Point point)
License requirements: nx_freeform_2 ("advanced freeform modeling") . |
void |
VariableOffsetBuilder.setPointA(Point point)
License requirements: studio_free_form ("STUDIO FREE FORM") . |
void |
DatumPlaneBuilder.setPointAndDirection(Point point,
nxopen.Direction direction)
Sets point and direction
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") . |
void |
DatumAxisBuilder.setPointAndDirection(Point point,
nxopen.Direction direction)
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT") . |
void |
VariableOffsetBuilder.setPointB(Point point)
License requirements: studio_free_form ("STUDIO FREE FORM") . |
void |
VariableOffsetBuilder.setPointC(Point point)
License requirements: studio_free_form ("STUDIO FREE FORM") . |
void |
VariableOffsetBuilder.setPointD(Point point)
License requirements: studio_free_form ("STUDIO FREE FORM") . |
void |
OffsetCurveBuilder.setPointOnOffsetPlane(Point pointOnOffsetPlane)
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING") . |
void |
ProjectCurveBuilder.setPointToProjectToward(Point towardPoint)
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") . |
void |
GeodesicProjectBuilder.setProjectPoint(Point projectPoint)
License requirements: solid_modeling ("SOLIDS MODELING") . |
void |
SectionCurveBuilder.setRadialPlanePoint(Point radialPlanePoint)
License requirements: solid_modeling ("SOLIDS MODELING") . |
void |
NSidedSurfaceBuilder.setRectanglePointFirst(Point firstPoint)
License requirements: features_modeling ("FEATURES MODELING"), nx_freeform_1 ("basic freeform modeling") . |
void |
NSidedSurfaceBuilder.setRectanglePointSecond(Point secondPoint)
License requirements: features_modeling ("FEATURES MODELING"), nx_freeform_1 ("basic freeform modeling") . |
void |
NSidedSurfaceBuilder.setRectanglePointThird(Point thirdPoint)
License requirements: features_modeling ("FEATURES MODELING"), nx_freeform_1 ("basic freeform modeling") . |
void |
HumanBuilder.setReferencePoint(boolean associative,
HumanData.ReferencePointType referencePointType,
Point referencePoint)
Sets the reference point
License requirements: solid_modeling ("SOLIDS MODELING"), ug_human ("Human Modelling") . |
void |
MirrorBuilder.setReferencePoint(Point referencePoint)
Deprecated.
Deprecated in NX9.0.0. Use
GeometricUtilities.PatternReferencePointServiceBuilder#setPoint instead.
|
void |
ProjectCurveBuilder.setReferencePointForEqualArcLength(Point referencePoint)
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") . |
void |
StudioXformBuilderEx.setRotatingPivotPoint(Point rotatingPivotPoint)
License requirements: studio_free_form ("STUDIO FREE FORM") . |
void |
StudioXformBuilderEx.setScalingCenterPoint(Point scalingCenterPoint)
License requirements: studio_free_form ("STUDIO FREE FORM") . |
void |
PatchOpeningsBuilder.setShelfPoint1(Point point)
License requirements: nx_freeform_2 ("advanced freeform modeling") OR die_engineering ("DIE ENGINEERING") . |
void |
PatchOpeningsBuilder.setShelfPoint2(Point point)
License requirements: nx_freeform_2 ("advanced freeform modeling") OR die_engineering ("DIE ENGINEERING") . |
void |
SmoothRangeBuilder.setSmoothRangeFrom(Point smoothRangeFrom)
License requirements: solid_modeling ("SOLIDS MODELING") . |
void |
SmoothRangeBuilder.setSmoothRangeTo(Point smoothRangeTo)
License requirements: solid_modeling ("SOLIDS MODELING") . |
void |
FaceBlendBuilder.setStartLimitPoint(Point point)
License requirements: solid_modeling ("SOLIDS MODELING") . |
void |
GeodesicLineBuilder.setStartPoint(Point startPoint)
License requirements: solid_modeling ("SOLIDS MODELING") . |
void |
GeneralConicBuilder.setStartPoint(Point startPoint)
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING") . |
void |
BridgeCurveBuilder.setStartReferencePoint(Point startReferencePoint)
Deprecated.
Deprecated in NX8.5.0. Use
BridgeCurveBuilderEx instead.
|
void |
GlobalShapingBuilder.setTargetPoint(Point targetPoint)
License requirements: solid_modeling ("SOLIDS MODELING") . |
void |
DatumPlaneBuilder.setThreePoints(Point point1,
Point point2,
Point point3,
DatumPlaneBuilder.UseArcLength useArcLength)
Sets three different points.
|
void |
TangentBuilder.setThroughPoint(Point throughPoint)
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") . |
void |
PerpendicularBuilder.setThroughPoint(Point throughPoint)
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") . |
void |
ParallelBuilder.setThroughPoint(Point throughPoint)
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") . |
void |
MoveFaceBuilder.setToPoint(Point toPoint)
License requirements: solid_modeling ("SOLIDS MODELING") . |
void |
DatumAxisBuilder.setTwoPoints(Point point1,
Point point2,
DatumAxisBuilder.UseArcLength useArcLength)
Sets two points
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT") . |
void |
GuidedExtensionBuilderEx.setVectorOrigin(Point vectorOrigin)
License requirements: solid_modeling ("SOLIDS MODELING") OR nx_freeform_2 ("advanced freeform modeling") OR ug_mold_design ("UG MOLD") OR die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard") . |
void |
ConcaveFacesBuilder.updateLocationLabel(boolean edit,
Point point)
The PMI as a location label created or edited at the point selected on a face.
|
Constructor and Description |
---|
ObjectDataCsys(Point flatPatternObjectInitial,
CartesianCoordinateSystem flatSolidObjectInitial,
DatumCsys formedBodyObjectInitial)
Constructor for the ObjectDataCsys object.
|
Modifier and Type | Method and Description |
---|---|
Point |
SMBoundaryConditionBuilder.endRegionPoint()
Returns the end region point This input is required only if the Constraint Type is
Features.SheetMetal.SMBoundaryConditionBuilder.ConstraintTypes#POINT_TO_POINT . |
Point |
AeroLighteningCutoutBuilder.holeCenter()
Returns the hole center
License requirements: None. |
Point |
BridgeTransitionBuilder.point()
Returns the point with respect to which the finite or symmetric width is specified.
|
Point |
FlexibleCableBuilder.startPoint()
Returns the start point.
|
Point |
SMBoundaryConditionBuilder.startRegionPoint()
Returns the start region point.
|
Modifier and Type | Method and Description |
---|---|
void |
SMBoundaryConditionBuilder.setEndRegionPoint(Point endRegionPoint)
License requirements: adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN") . |
void |
AeroLighteningCutoutBuilder.setHoleCenter(Point holeCenter)
License requirements: aero_sheet_metal ("Aerospace Sheet Metal") . |
void |
BridgeTransitionBuilder.setPoint(Point point)
License requirements: nx_flexible_pcb ("NX Flexible PCB") OR adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN") . |
void |
FlexibleCableBuilder.setStartPoint(Point startPoint)
Sets the start point.
|
void |
SMBoundaryConditionBuilder.setStartRegionPoint(Point startRegionPoint)
License requirements: adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN") . |
Modifier and Type | Method and Description |
---|---|
Point |
WeldCut2Builder.cornerPoint()
Returns the corner point as weld location.
|
Point |
CornerCutListItemBuilder.cornerPoint()
Returns the corner point as the cut location.
|
Point |
CornerCutBuilder.cornerPoint()
Returns the corner point.
|
Point |
SeamBuilder.definitionRectangularCorner()
Returns the starting corner of the rectangular grid that defines the seams.
|
Point |
RollingLineBuilder.evaluationPoint()
Returns the selected point for evaluation when
RollingLineBuilder.StartEvaluationTypes is
RollingLineBuilder.StartEvaluationTypes.NEW_POINT . |
Point |
CustomBracketBuilder.heelPoint()
Returns the heel point
License requirements: None. |
Point |
ShipCoordinatesBuilder.point()
Returns the point to define ship coordinates.
|
Point |
PenetrationRequestBuilder.point()
Returns the penetrating point
License requirements: None. |
Point |
PenetrationAssociationBuilder.point()
Returns the penetration point
License requirements: None. |
Point |
PointPairBuilder.point1()
Returns the first point in the point pair list element.
|
Point |
PointPairBuilder.point2()
Returns the second point in the point pair list element.
|
Point |
InverseBendingLinesBuilder.referencePlanePoint()
Returns the reference plane origin when one of the standard planes is chosen.
|
Point |
OrientationPointMethodsBuilder.specifyPoint()
Returns the point used to determine the boundary of the region.
|
Point |
StiffenerBySupportPathBuilder.throughPointLocation()
Returns the through point location.
|
Point |
WeldCutBuilder.weldLocation()
Returns the weld location.
|
Modifier and Type | Method and Description |
---|---|
void |
WeldCut2Builder.setCornerPoint(Point weldLocation)
License requirements: nx_ship_detail ("Ship Detail Design") . |
void |
CornerCutListItemBuilder.setCornerPoint(Point weldLocation)
License requirements: nx_ship_detail ("Ship Detail Design") . |
void |
CornerCutBuilder.setCornerPoint(Point cornerPoint)
License requirements: nx_ship_detail ("Ship Detail Design") . |
void |
SeamBuilder.setDefinitionRectangularCorner(Point definitionRectangularCorner)
License requirements: nx_ship_basic ("Ship Basic Design") . |
void |
RollingLineBuilder.setEvaluationPoint(Point evaluationPoint)
License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_mfg_prep ("Ship Manufacturing") . |
void |
CustomBracketBuilder.setHeelPoint(Point heelPoint)
License requirements: nx_ship_concept ("Ship Concept") . |
void |
ShipCoordinatesBuilder.setPoint(Point selectPoint)
License requirements: nx_ship_detail ("Ship Detail Design") OR nx_ship_basic ("Ship Basic Design") OR routing_base ("Routing Basic") . |
void |
PenetrationRequestBuilder.setPoint(Point pointPenetrating)
License requirements: nx_penetration_mgmt ("Penetration Management") . |
void |
PenetrationAssociationBuilder.setPoint(Point point)
License requirements: nx_penetration_mgmt ("Penetration Management") . |
void |
PointPairBuilder.setPoint1(Point point1)
License requirements: nx_ship_basic ("Ship Basic Design") . |
void |
PointPairBuilder.setPoint2(Point point2)
License requirements: nx_ship_basic ("Ship Basic Design") . |
void |
InverseBendingLinesBuilder.setReferencePlanePoint(Point referencePlanePoint)
License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_mfg_prep ("Ship Manufacturing") . |
void |
OrientationPointMethodsBuilder.setSpecifyPoint(Point specifyPoint)
License requirements: nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design") . |
void |
StiffenerBySupportPathBuilder.setThroughPointLocation(Point throughPointLocation)
License requirements: nx_ship_detail ("Ship Detail Design") OR nx_ship_basic ("Ship Basic Design") . |
void |
WeldCutBuilder.setWeldLocation(Point weldLocation)
License requirements: solid_modeling ("SOLIDS MODELING") . |
Modifier and Type | Method and Description |
---|---|
void |
CageManipulatorData.move(Point3d moveToPoint,
Point point,
boolean isSnapGesture)
Moves the objects by dragging.
|
Modifier and Type | Method and Description |
---|---|
Point |
HeadImpactAPillarDetailBuilder.ap1Left()
Returns the left AP1 alternative point.
|
Point |
HeadImpactAPillarDetailBuilder.ap1Right()
Returns the right AP1 alternative point.
|
Point |
HeadImpactAPillarDetailBuilder.ap2Left()
Returns the left AP2 alternative point.
|
Point |
HeadImpactAPillarDetailBuilder.ap2Right()
Returns the right AP2 alternative point.
|
Point |
HeadImpactAPillarDetailBuilder.ap3Left()
Returns the left AP3 alternative point.
|
Point |
HeadImpactAPillarDetailBuilder.ap3Right()
Returns the right AP3 alternative point.
|
Point |
HeadImpactBPillarDetailBuilder.bp1Left()
Returns the left BP1 alternative point.
|
Point |
HeadImpactBPillarDetailBuilder.bp1Right()
Returns the right BP1 alternative point.
|
Point |
HeadImpactBPillarWizardBuilder.bp2Left()
Returns the left B-pillar 2 point.
|
Point |
HeadImpactBPillarDetailBuilder.bp2Left()
Returns the left BP2 alternative point.
|
Point |
HeadImpactBPillarWizardBuilder.bp2Right()
Returns the right B-pillar 2 point.
|
Point |
HeadImpactBPillarDetailBuilder.bp2Right()
Returns the right BP2 alternative point.
|
Point |
HeadImpactBPillarDetailBuilder.bp3Left()
Returns the left BP3 alternative point.
|
Point |
HeadImpactBPillarDetailBuilder.bp3Right()
Returns the right BP3 alternative point.
|
Point |
HeadImpactBPillarDetailBuilder.bp4Left()
Returns the left BP4 alternative point.
|
Point |
HeadImpactBPillarDetailBuilder.bp4Right()
Returns the right BP4 alternative point.
|
Point |
HeadImpactOPillarWizardBuilder.daylightBottomLeft()
Returns the left daylight opening bottom point.
|
Point |
HeadImpactOPillarDetailBuilder.daylightBottomLeft()
Returns the left Daylight Bottom additional geometry.
|
Point |
HeadImpactBPillarWizardBuilder.daylightBottomLeft()
Returns the left daylight opening bottom point.
|
Point |
HeadImpactBPillarDetailBuilder.daylightBottomLeft()
Returns the left Daylight Bottom additional geometry.
|
Point |
HeadImpactOPillarWizardBuilder.daylightBottomRight()
Returns the right daylight opening bottom point.
|
Point |
HeadImpactOPillarDetailBuilder.daylightBottomRight()
Returns the right Daylight Bottom additional geometry.
|
Point |
HeadImpactBPillarWizardBuilder.daylightBottomRight()
Returns the right daylight opening bottom point.
|
Point |
HeadImpactBPillarDetailBuilder.daylightBottomRight()
Returns the right Daylight Bottom additional geometry.
|
Point |
HeadImpactOPillarWizardBuilder.doorTopLeft()
Returns the left door opening top point.
|
Point |
HeadImpactOPillarDetailBuilder.doorTopLeft()
Returns the left Door Top additional geometry.
|
Point |
HeadImpactBPillarWizardBuilder.doorTopLeft()
Returns the left door opening top point.
|
Point |
HeadImpactBPillarDetailBuilder.doorTopLeft()
Returns the left Door Top additional geometry.
|
Point |
HeadImpactOPillarWizardBuilder.doorTopRight()
Returns the right door opening top point.
|
Point |
HeadImpactOPillarDetailBuilder.doorTopRight()
Returns the right Door Top additional geometry.
|
Point |
HeadImpactBPillarWizardBuilder.doorTopRight()
Returns the right door opening top point.
|
Point |
HeadImpactBPillarDetailBuilder.doorTopRight()
Returns the right Door Top additional geometry.
|
Point |
ReflectionDataBuilder.eyePoint()
Returns the eye point
License requirements: None. |
Point |
HoodVisibilityBuilder.eyePoint()
Returns the eye point
License requirements: None. |
Point |
HeadImpactFrontHeaderDetailBuilder.fh1Left()
Returns the left FH1 alternative point.
|
Point |
HeadImpactFrontHeaderDetailBuilder.fh1Right()
Returns the right FH1 alternative point.
|
Point |
HeadImpactFrontHeaderDetailBuilder.fh2Left()
Returns the left FH2 alternative point.
|
Point |
HeadImpactFrontHeaderDetailBuilder.fh2Right()
Returns the right FH2 alternative point.
|
Point |
MirrorCertificationBuilder.groundWidePoint()
Returns the ground wide point representing the widest position of the vehicle body at the ground level.
|
Point |
BaseDataPassengerBuilder.heelReferencePoint()
Returns the passenger's heel reference point.
|
Point |
BaseDataDriverBuilder.heelReferencePoint()
Returns the driver heel reference point.
|
Point |
PedestrianProtectionBuilder.hingePoint()
Returns the point about which to rotate the active hood.
|
Point |
MirrorCertificationBuilder.hipPoint()
Returns the hip point of the driver.
|
Point |
HeadImpactAPillarDetailBuilder.line1Left()
Returns the left Line 1 additional geometry.
|
Point |
HeadImpactAPillarWizardBuilder.line1PointLeft()
Returns the left Line 1 point.
|
Point |
HeadImpactAPillarWizardBuilder.line1PointRight()
Returns the right Line 1 point.
|
Point |
HeadImpactAPillarDetailBuilder.line1Right()
Returns the right Line 1 additional geometry.
|
Point |
CloseRangeVisibilityBuilder.mirrorRotationPoint()
Returns the mirror rotation point specified.
|
Point |
HeadImpactOPillarWizardBuilder.op1Left()
Returns the left additional pillar 1 point.
|
Point |
HeadImpactOPillarDetailBuilder.op1Left()
Returns the left OP1 alternative point.
|
Point |
HeadImpactOPillarWizardBuilder.op1Right()
Returns the right additional pillar 1 point.
|
Point |
HeadImpactOPillarDetailBuilder.op1Right()
Returns the right OP1 alternative point.
|
Point |
HeadImpactOPillarDetailBuilder.op2Left()
Returns the left OP2 alternative point.
|
Point |
HeadImpactOPillarDetailBuilder.op2Right()
Returns the right OP2 alternative point.
|
Point |
VehicleCoordinateSystemBuilder.originPoint()
Returns the origin point.
|
Point |
BaseDataDriverBuilder.pedalReferencePoint()
Returns the driver pedal reference point.
|
Point |
MirrorCertificationBuilder.pivotPoint()
Returns the pivot point about which the mirror rotates.
|
Point |
HeadImpactAPillarDetailBuilder.plane1Left()
Returns the left Plane 1 additional geometry.
|
Point |
HeadImpactAPillarWizardBuilder.plane1PointLeft()
Returns the left Plane 1 point.
|
Point |
HeadImpactAPillarWizardBuilder.plane1PointRight()
Returns the right Plane 1 point.
|
Point |
HeadImpactAPillarDetailBuilder.plane1Right()
Returns the right Plane 1 additional geometry.
|
Point |
HeadImpactAPillarDetailBuilder.plane5Left()
Returns the left Plane 5 additional geometry.
|
Point |
HeadImpactAPillarWizardBuilder.plane5PointLeft()
Returns the left Plane 5 point.
|
Point |
HeadImpactAPillarWizardBuilder.plane5PointRight()
Returns the right Plane 5 point.
|
Point |
HeadImpactAPillarDetailBuilder.plane5Right()
Returns the right Plane 5 additional geometry.
|
Point |
HeadImpactUpperRoofWizardBuilder.planeAPoint()
Returns the plane A point.
|
Point |
HeadImpactUpperRoofWizardBuilder.planeBPoint()
Returns the plane B point.
|
Point |
HeadImpactUpperRoofWizardBuilder.planeCPoint()
Returns the plane C point.
|
Point |
HeadImpactUpperRoofWizardBuilder.planeDPoint()
Returns the plane D point.
|
Point |
HeadImpactUpperRoofDetailBuilder.pointA()
Returns the point A additional geometry.
|
Point |
HeadImpactUpperRoofDetailBuilder.pointB()
Returns the point B additional geometry.
|
Point |
HeadImpactUpperRoofDetailBuilder.pointC()
Returns the point C additional geometry.
|
Point |
HeadImpactUpperRoofDetailBuilder.pointD()
Returns the point D additional geometry.
|
Point |
HeadImpactUpperRoofDetailBuilder.pointM()
Returns the point M alternative point.
|
Point |
WindshieldDatumBuilder.pointV1()
Returns the point v1; select one point when eye type specified.
|
Point |
VisionPlaneBuilder.pointV1()
Returns the point v1; select one point when eye type specified.
|
Point |
WindshieldDatumBuilder.pointV2()
Returns the point v2; select one point when eye type specified.
|
Point |
VisionPlaneBuilder.pointV2()
Returns the point v2; select one point when eye type specified.
|
Point |
PedestrianProtectionBuilder.popupPoint()
Returns the reference point of the active hood.
|
Point |
MirrorCertificationBuilder.primePoint()
Returns the prime point representing the highest inboard point on the mirror, which defines the horizontal ray (in side view) parallel to vehicle centerline (in top view).
|
Point |
HeadImpactSideRailDetailBuilder.pt11Left()
Returns the left PT11 additional geometry.
|
Point |
HeadImpactSideRailDetailBuilder.pt11Right()
Returns the right PT11 additional geometry.
|
Point |
HeadImpactSideRailDetailBuilder.pt12Left()
Returns the left PT12 additional geometry.
|
Point |
HeadImpactSideRailDetailBuilder.pt12Right()
Returns the right PT12 additional geometry.
|
Point |
HeadImpactSideRailDetailBuilder.pt14Left()
Returns the left PT14 additional geometry.
|
Point |
HeadImpactSideRailDetailBuilder.pt14Right()
Returns the right PT14 additional geometry.
|
Point |
HeadImpactOtherRailDetailBuilder.pt15Left()
Returns the left PT15 additional geometry.
|
Point |
HeadImpactOtherRailDetailBuilder.pt15Right()
Returns the right PT15 additional geometry.
|
Point |
HeadImpactOtherRailDetailBuilder.pt16Left()
Returns the left PT16 additional geometry.
|
Point |
HeadImpactOtherRailDetailBuilder.pt16Right()
Returns the right PT16 additional geometry.
|
Point |
HeadImpactBPillarDetailBuilder.pt4Left()
Returns the left PT4 additional geometry.
|
Point |
HeadImpactBPillarDetailBuilder.pt4Right()
Returns the right PT4 additional geometry.
|
Point |
HeadImpactOPillarDetailBuilder.pt6Left()
Returns the left PT6 additional geometry.
|
Point |
HeadImpactOPillarDetailBuilder.pt6Right()
Returns the right PT6 additional geometry.
|
Point |
HeadImpactRPillarDetailBuilder.pt7Left()
Returns the left PT7 additional geometry.
|
Point |
HeadImpactRPillarDetailBuilder.pt7Right()
Returns the right PT7 additional geometry.
|
Point |
HeadImpactRearHeaderDetailBuilder.rhleft()
Returns the left rear header target alternative point.
|
Point |
HeadImpactRearHeaderDetailBuilder.rhright()
Returns the right rear header target alternative point.
|
Point |
HeadImpactRPillarDetailBuilder.rp1Left()
Returns the left RP1 alternative point.
|
Point |
HeadImpactRPillarDetailBuilder.rp1Right()
Returns the right RP1 alternative point.
|
Point |
HeadImpactRPillarWizardBuilder.rp2Left()
Returns the left rear pillar 2 point.
|
Point |
HeadImpactRPillarDetailBuilder.rp2Left()
Returns the left RP2 alternative point.
|
Point |
HeadImpactRPillarWizardBuilder.rp2Right()
Returns the right rear pillar 2 point.
|
Point |
HeadImpactRPillarDetailBuilder.rp2Right()
Returns the right RP2 alternative point.
|
Point |
BaseDataPassengerBuilder.seatReferencePoint()
Returns the passenger's seat reference point.
|
Point |
BaseDataDriverBuilder.seatReferencePoint()
Returns the driver seat reference point.
|
Point |
AllAroundVisionBuilder.seatReferencePoint()
Returns the seat reference point(SgRP).
|
Point |
SeatBeltAnchorageBuilder.sgrpPoint()
Returns the SgRp point
License requirements: None. |
Point |
TireEnvelopeBuilder.spindleEndPoint()
Returns the end point of the spindle line, the other end point is the wheel point.
|
Point |
HeadImpactSideRailDetailBuilder.sr1Left()
Returns the left SR1 alternative point.
|
Point |
HeadImpactSideRailDetailBuilder.sr1Right()
Returns the right SR1 alternative point.
|
Point |
HeadImpactSideRailDetailBuilder.sr2Left()
Returns the left SR2 alternative point.
|
Point |
HeadImpactSideRailDetailBuilder.sr2Right()
Returns the right SR2 alternative point.
|
Point |
HeadImpactOtherRailWizardBuilder.sr3Left()
Returns the left additional Side Rail 3 point.
|
Point |
HeadImpactOtherRailDetailBuilder.sr3Left()
Returns the left SR3 alternative point.
|
Point |
HeadImpactOtherRailWizardBuilder.sr3Right()
Returns the right additional Side Rail 3 point.
|
Point |
HeadImpactOtherRailDetailBuilder.sr3Right()
Returns the right SR3 alternative point.
|
Point |
BaseDataDriverBuilder.steeringWheelCenterPoint()
Returns the center point of the driver steering wheel.
|
Point |
MirrorCertificationBuilder.wheelProtrusionPoint()
Returns the wheel protrusion point used to calculate close targets near the rear axle centerline.
|
Modifier and Type | Method and Description |
---|---|
void |
HeadImpactAPillarDetailBuilder.setAP1Left(Point ap1Left)
License requirements: nx_general_packaging ("NX General Packaging") . |
void |
HeadImpactAPillarDetailBuilder.setAP1Right(Point ap1Right)
License requirements: nx_general_packaging ("NX General Packaging") . |
void |
HeadImpactAPillarDetailBuilder.setAP2Left(Point ap2Left)
License requirements: nx_general_packaging ("NX General Packaging") . |
void |
HeadImpactAPillarDetailBuilder.setAP2Right(Point ap2Right)
License requirements: nx_general_packaging ("NX General Packaging") . |
void |
HeadImpactAPillarDetailBuilder.setAP3Left(Point ap3Left)
License requirements: nx_general_packaging ("NX General Packaging") . |
void |
HeadImpactAPillarDetailBuilder.setAP3Right(Point ap3Right)
License requirements: nx_general_packaging ("NX General Packaging") . |
void |
HeadImpactBPillarDetailBuilder.setBP1Left(Point bp1Left)
License requirements: nx_general_packaging ("NX General Packaging") . |
void |
HeadImpactBPillarDetailBuilder.setBP1Right(Point bp1Right)
License requirements: nx_general_packaging ("NX General Packaging") . |
void |
HeadImpactBPillarWizardBuilder.setBP2Left(Point bp2Left)
License requirements: nx_general_packaging ("NX General Packaging") . |
void |
HeadImpactBPillarDetailBuilder.setBP2Left(Point bp2Left)
License requirements: nx_general_packaging ("NX General Packaging") . |
void |
HeadImpactBPillarWizardBuilder.setBP2Right(Point bp2Right)
License requirements: nx_general_packaging ("NX General Packaging") . |
void |
HeadImpactBPillarDetailBuilder.setBP2Right(Point bp2Right)
License requirements: nx_general_packaging ("NX General Packaging") . |
void |
HeadImpactBPillarDetailBuilder.setBP3Left(Point bp3Left)
License requirements: nx_general_packaging ("NX General Packaging") . |
void |
HeadImpactBPillarDetailBuilder.setBP3Right(Point bp3Right)
License requirements: nx_general_packaging ("NX General Packaging") . |
void |
HeadImpactBPillarDetailBuilder.setBP4Left(Point bp4Left)
License requirements: nx_general_packaging ("NX General Packaging") . |
void |
HeadImpactBPillarDetailBuilder.setBP4Right(Point bp4Right)
License requirements: nx_general_packaging ("NX General Packaging") . |
void |
HeadImpactOPillarWizardBuilder.setDaylightBottomLeft(Point daylightBottomLeft)
License requirements: nx_general_packaging ("NX General Packaging") . |
void |
HeadImpactOPillarDetailBuilder.setDaylightBottomLeft(Point daylightBottomLeft)
License requirements: nx_general_packaging ("NX General Packaging") . |
void |
HeadImpactBPillarWizardBuilder.setDaylightBottomLeft(Point daylightBottomLeft)
License requirements: nx_general_packaging ("NX General Packaging") . |
void |
HeadImpactBPillarDetailBuilder.setDaylightBottomLeft(Point daylightBottomLeft)
License requirements: nx_general_packaging ("NX General Packaging") . |
void |
HeadImpactOPillarWizardBuilder.setDaylightBottomRight(Point daylightBottomRight)
License requirements: nx_general_packaging ("NX General Packaging") . |
void |
HeadImpactOPillarDetailBuilder.setDaylightBottomRight(Point daylightBottomRight)
License requirements: nx_general_packaging ("NX General Packaging") . |
void |
HeadImpactBPillarWizardBuilder.setDaylightBottomRight(Point daylightBottomRight)
License requirements: nx_general_packaging ("NX General Packaging") . |
void |
HeadImpactBPillarDetailBuilder.setDaylightBottomRight(Point daylightBottomRight)
License requirements: nx_general_packaging ("NX General Packaging") . |
void |
HeadImpactOPillarWizardBuilder.setDoorTopLeft(Point doorTopLeft)
License requirements: nx_general_packaging ("NX General Packaging") . |
void |
HeadImpactOPillarDetailBuilder.setDoorTopLeft(Point doorTopLeft)
License requirements: nx_general_packaging ("NX General Packaging") . |
void |
HeadImpactBPillarWizardBuilder.setDoorTopLeft(Point doorTopLeft)
License requirements: nx_general_packaging ("NX General Packaging") . |
void |
HeadImpactBPillarDetailBuilder.setDoorTopLeft(Point doorTopLeft)
License requirements: nx_general_packaging ("NX General Packaging") . |
void |
HeadImpactOPillarWizardBuilder.setDoorTopRight(Point doorTopRight)
License requirements: nx_general_packaging ("NX General Packaging") . |
void |
HeadImpactOPillarDetailBuilder.setDoorTopRight(Point doorTopRight)
License requirements: nx_general_packaging ("NX General Packaging") . |
void |
HeadImpactBPillarWizardBuilder.setDoorTopRight(Point doorTopRight)
License requirements: nx_general_packaging ("NX General Packaging") . |
void |
HeadImpactBPillarDetailBuilder.setDoorTopRight(Point doorTopRight)
License requirements: nx_general_packaging ("NX General Packaging") . |
void |
ReflectionDataBuilder.setEyePoint(Point eyePoint)
License requirements: nx_general_packaging ("NX General Packaging") . |
void |
HoodVisibilityBuilder.setEyePoint(Point eyePoint)
License requirements: nx_general_packaging ("NX General Packaging") . |
void |
HeadImpactFrontHeaderDetailBuilder.setFH1Left(Point fh1Left)
License requirements: nx_general_packaging ("NX General Packaging") . |
void |
HeadImpactFrontHeaderDetailBuilder.setFH1Right(Point fh1Right)
License requirements: nx_general_packaging ("NX General Packaging") . |
void |
HeadImpactFrontHeaderDetailBuilder.setFH2Left(Point rp2Left)
License requirements: nx_general_packaging ("NX General Packaging") . |
void |
HeadImpactFrontHeaderDetailBuilder.setFH2Right(Point rp2Right)
License requirements: nx_general_packaging ("NX General Packaging") . |
void |
MirrorCertificationBuilder.setGroundWidePoint(Point groundWidePoint)
License requirements: nx_general_packaging ("NX General Packaging") . |
void |
BaseDataPassengerBuilder.setHeelReferencePoint(Point refPoint)
License requirements: nx_general_packaging ("NX General Packaging") . |
void |
BaseDataDriverBuilder.setHeelReferencePoint(Point refPoint)
License requirements: nx_general_packaging ("NX General Packaging") . |
void |
PedestrianProtectionBuilder.setHingePoint(Point hingePoint)
License requirements: nx_general_packaging ("NX General Packaging") . |
void |
MirrorCertificationBuilder.setHipPoint(Point hipPoint)
License requirements: nx_general_packaging ("NX General Packaging") . |
void |
HeadImpactAPillarDetailBuilder.setLine1Left(Point line1Left)
License requirements: nx_general_packaging ("NX General Packaging") . |
void |
HeadImpactAPillarWizardBuilder.setLine1PointLeft(Point line1PointLeft)
License requirements: nx_general_packaging ("NX General Packaging") . |
void |
HeadImpactAPillarWizardBuilder.setLine1PointRight(Point line1PointRight)
License requirements: nx_general_packaging ("NX General Packaging") . |
void |
HeadImpactAPillarDetailBuilder.setLine1Right(Point line1Right)
License requirements: nx_general_packaging ("NX General Packaging") . |
void |
CloseRangeVisibilityBuilder.setMirrorRotationPoint(Point mirrorRotationPoint)
License requirements: nx_general_packaging ("NX General Packaging") . |
void |
HeadImpactOPillarWizardBuilder.setOP1Left(Point op1Left)
License requirements: nx_general_packaging ("NX General Packaging") . |
void |
HeadImpactOPillarDetailBuilder.setOP1Left(Point op1Left)
License requirements: nx_general_packaging ("NX General Packaging") . |
void |
HeadImpactOPillarWizardBuilder.setOP1Right(Point op1Right)
License requirements: nx_general_packaging ("NX General Packaging") . |
void |
HeadImpactOPillarDetailBuilder.setOP1Right(Point op1Right)
License requirements: nx_general_packaging ("NX General Packaging") . |
void |
HeadImpactOPillarDetailBuilder.setOP2Left(Point op2Left)
License requirements: nx_general_packaging ("NX General Packaging") . |
void |
HeadImpactOPillarDetailBuilder.setOP2Right(Point op2Right)
License requirements: nx_general_packaging ("NX General Packaging") . |
void |
VehicleCoordinateSystemBuilder.setOriginPoint(Point originPoint)
License requirements: nx_general_packaging ("NX General Packaging") OR ug_body_design ("Body Design") OR nx_posture ("NX Jack Posture Prediction") . |
void |
BaseDataDriverBuilder.setPedalReferencePoint(Point refPoint)
License requirements: nx_general_packaging ("NX General Packaging") . |
void |
MirrorCertificationBuilder.setPivotPoint(Point pivotPoint)
License requirements: nx_general_packaging ("NX General Packaging") . |
void |
HeadImpactAPillarDetailBuilder.setPlane1Left(Point plane1Left)
License requirements: nx_general_packaging ("NX General Packaging") . |
void |
HeadImpactAPillarWizardBuilder.setPlane1PointLeft(Point plane1PointLeft)
License requirements: nx_general_packaging ("NX General Packaging") . |
void |
HeadImpactAPillarWizardBuilder.setPlane1PointRight(Point plane1PointRight)
License requirements: nx_general_packaging ("NX General Packaging") . |
void |
HeadImpactAPillarDetailBuilder.setPlane1Right(Point plane1Right)
License requirements: nx_general_packaging ("NX General Packaging") . |
void |
HeadImpactAPillarDetailBuilder.setPlane5Left(Point plane5Left)
License requirements: nx_general_packaging ("NX General Packaging") . |
void |
HeadImpactAPillarWizardBuilder.setPlane5PointLeft(Point plane5PointLeft)
License requirements: nx_general_packaging ("NX General Packaging") . |
void |
HeadImpactAPillarWizardBuilder.setPlane5PointRight(Point plane5PointRight)
License requirements: nx_general_packaging ("NX General Packaging") . |
void |
HeadImpactAPillarDetailBuilder.setPlane5Right(Point plane5Right)
License requirements: nx_general_packaging ("NX General Packaging") . |
void |
HeadImpactUpperRoofWizardBuilder.setPlaneAPoint(Point planeAPoint)
License requirements: nx_general_packaging ("NX General Packaging") . |
void |
HeadImpactUpperRoofWizardBuilder.setPlaneBPoint(Point planeBPoint)
License requirements: nx_general_packaging ("NX General Packaging") . |
void |
HeadImpactUpperRoofWizardBuilder.setPlaneCPoint(Point planeCPoint)
License requirements: nx_general_packaging ("NX General Packaging") . |
void |
HeadImpactUpperRoofWizardBuilder.setPlaneDPoint(Point planeDPoint)
License requirements: nx_general_packaging ("NX General Packaging") . |
void |
HeadImpactUpperRoofDetailBuilder.setPointA(Point pointA)
License requirements: nx_general_packaging ("NX General Packaging") . |
void |
HeadImpactUpperRoofDetailBuilder.setPointB(Point pointB)
License requirements: nx_general_packaging ("NX General Packaging") . |
void |
HeadImpactUpperRoofDetailBuilder.setPointC(Point pointC)
License requirements: nx_general_packaging ("NX General Packaging") . |
void |
HeadImpactUpperRoofDetailBuilder.setPointD(Point pointD)
License requirements: nx_general_packaging ("NX General Packaging") . |
void |
HeadImpactUpperRoofDetailBuilder.setPointM(Point pointM)
License requirements: nx_general_packaging ("NX General Packaging") . |
void |
WindshieldDatumBuilder.setPointV1(Point pointV1)
License requirements: nx_general_packaging ("NX General Packaging") . |
void |
VisionPlaneBuilder.setPointV1(Point pointV1)
License requirements: nx_general_packaging ("NX General Packaging") . |
void |
WindshieldDatumBuilder.setPointV2(Point pointV2)
License requirements: nx_general_packaging ("NX General Packaging") . |
void |
VisionPlaneBuilder.setPointV2(Point pointV2)
License requirements: nx_general_packaging ("NX General Packaging") . |
void |
PedestrianProtectionBuilder.setPopupPoint(Point popupPoint)
License requirements: nx_general_packaging ("NX General Packaging") . |
void |
MirrorCertificationBuilder.setPrimePoint(Point primePoint)
License requirements: nx_general_packaging ("NX General Packaging") . |
void |
HeadImpactSideRailDetailBuilder.setPT11Left(Point pt11Left)
License requirements: nx_general_packaging ("NX General Packaging") . |
void |
HeadImpactSideRailDetailBuilder.setPT11Right(Point pt11Right)
License requirements: nx_general_packaging ("NX General Packaging") . |
void |
HeadImpactSideRailDetailBuilder.setPT12Left(Point pt12Left)
License requirements: nx_general_packaging ("NX General Packaging") . |
void |
HeadImpactSideRailDetailBuilder.setPT12Right(Point pt12Right)
License requirements: nx_general_packaging ("NX General Packaging") . |
void |
HeadImpactSideRailDetailBuilder.setPT14Left(Point pt14Left)
License requirements: nx_general_packaging ("NX General Packaging") . |
void |
HeadImpactSideRailDetailBuilder.setPT14Right(Point pt14Right)
License requirements: nx_general_packaging ("NX General Packaging") . |
void |
HeadImpactOtherRailDetailBuilder.setPT15Left(Point pt15Left)
License requirements: nx_general_packaging ("NX General Packaging") . |
void |
HeadImpactOtherRailDetailBuilder.setPT15Right(Point pt15Right)
License requirements: nx_general_packaging ("NX General Packaging") . |
void |
HeadImpactOtherRailDetailBuilder.setPT16Left(Point pt16Left)
License requirements: nx_general_packaging ("NX General Packaging") . |
void |
HeadImpactOtherRailDetailBuilder.setPT16Right(Point pt16Right)
License requirements: nx_general_packaging ("NX General Packaging") . |
void |
HeadImpactBPillarDetailBuilder.setPT4Left(Point pt4Left)
License requirements: nx_general_packaging ("NX General Packaging") . |
void |
HeadImpactBPillarDetailBuilder.setPT4Right(Point pt4Right)
License requirements: nx_general_packaging ("NX General Packaging") . |
void |
HeadImpactOPillarDetailBuilder.setPT6Left(Point pt6Left)
License requirements: nx_general_packaging ("NX General Packaging") . |
void |
HeadImpactOPillarDetailBuilder.setPT6Right(Point pt6Right)
License requirements: nx_general_packaging ("NX General Packaging") . |
void |
HeadImpactRPillarDetailBuilder.setPT7Left(Point pt7Left)
License requirements: nx_general_packaging ("NX General Packaging") . |
void |
HeadImpactRPillarDetailBuilder.setPT7Right(Point pt7Right)
License requirements: nx_general_packaging ("NX General Packaging") . |
void |
HeadImpactRearHeaderDetailBuilder.setRHLeft(Point rhLeft)
License requirements: nx_general_packaging ("NX General Packaging") . |
void |
HeadImpactRearHeaderDetailBuilder.setRHRight(Point rhRight)
License requirements: nx_general_packaging ("NX General Packaging") . |
void |
HeadImpactRPillarDetailBuilder.setRP1Left(Point rp1Left)
License requirements: nx_general_packaging ("NX General Packaging") . |
void |
HeadImpactRPillarDetailBuilder.setRP1Right(Point rp1Right)
License requirements: nx_general_packaging ("NX General Packaging") . |
void |
HeadImpactRPillarWizardBuilder.setRP2Left(Point rp2Left)
License requirements: nx_general_packaging ("NX General Packaging") . |
void |
HeadImpactRPillarDetailBuilder.setRP2Left(Point rp2Left)
License requirements: nx_general_packaging ("NX General Packaging") . |
void |
HeadImpactRPillarWizardBuilder.setRP2Right(Point rp2Right)
License requirements: nx_general_packaging ("NX General Packaging") . |
void |
HeadImpactRPillarDetailBuilder.setRP2Right(Point rp2Right)
License requirements: nx_general_packaging ("NX General Packaging") . |
void |
BaseDataPassengerBuilder.setSeatReferencePoint(Point refPoint)
License requirements: nx_general_packaging ("NX General Packaging") . |
void |
BaseDataDriverBuilder.setSeatReferencePoint(Point refPoint)
License requirements: nx_general_packaging ("NX General Packaging") . |
void |
AllAroundVisionBuilder.setSeatReferencePoint(Point seatReferencePoint)
License requirements: nx_general_packaging ("NX General Packaging") . |
void |
SeatBeltAnchorageBuilder.setSgrpPoint(Point sgrpPoint)
License requirements: nx_general_packaging ("NX General Packaging") . |
void |
TireEnvelopeBuilder.setSpindleEndPoint(Point spindleEndPoint)
License requirements: nx_general_packaging ("NX General Packaging") . |
void |
HeadImpactSideRailDetailBuilder.setSR1Left(Point sr1Left)
License requirements: nx_general_packaging ("NX General Packaging") . |
void |
HeadImpactSideRailDetailBuilder.setSR1Right(Point sr1Right)
License requirements: nx_general_packaging ("NX General Packaging") . |
void |
HeadImpactSideRailDetailBuilder.setSR2Left(Point sr2Left)
License requirements: nx_general_packaging ("NX General Packaging") . |
void |
HeadImpactSideRailDetailBuilder.setSR2Right(Point sr2Right)
License requirements: nx_general_packaging ("NX General Packaging") . |
void |
HeadImpactOtherRailWizardBuilder.setSR3Left(Point sr3Left)
License requirements: nx_general_packaging ("NX General Packaging") . |
void |
HeadImpactOtherRailDetailBuilder.setSR3Left(Point sr3Left)
License requirements: nx_general_packaging ("NX General Packaging") . |
void |
HeadImpactOtherRailWizardBuilder.setSR3Right(Point sr3Right)
License requirements: nx_general_packaging ("NX General Packaging") . |
void |
HeadImpactOtherRailDetailBuilder.setSR3Right(Point sr3Right)
License requirements: nx_general_packaging ("NX General Packaging") . |
void |
BaseDataDriverBuilder.setSteeringWheelCenterPoint(Point refPoint)
License requirements: nx_general_packaging ("NX General Packaging") . |
void |
MirrorCertificationBuilder.setWheelProtrusionPoint(Point wheelProtrusionPoint)
License requirements: nx_general_packaging ("NX General Packaging") . |
Modifier and Type | Method and Description |
---|---|
Point |
SpatialMapBuilder.oppositeCorner()
Returns the opposite corner
License requirements: None. |
Point |
SpatialMapBuilder.origin()
Returns the origin
License requirements: None. |
Modifier and Type | Method and Description |
---|---|
void |
SpatialMapBuilder.setOppositeCorner(Point oppositeCorner)
License requirements: None. |
void |
SpatialMapBuilder.setOrigin(Point origin)
License requirements: None. |
Modifier and Type | Method and Description |
---|---|
Point |
OrientBranchBuilder.fromPoint()
Deprecated.
Deprecated in NX8.5.0. This
OrientBranchBuilder.BranchAngleMethod.TWO_POINTS is no longer supported.
|
Point |
FormboardLayoutBuilder.mainRunOrigin()
Returns the main run origin.
|
Point |
OrientBranchBuilder.toPoint()
Deprecated.
Deprecated in NX8.5.0. This
OrientBranchBuilder.BranchAngleMethod.TWO_POINTS is no longer supported.
|
Modifier and Type | Method and Description |
---|---|
void |
OrientBranchBuilder.setFromPoint(Point fromPoint)
Deprecated.
Deprecated in NX8.5.0. This
OrientBranchBuilder.BranchAngleMethod.TWO_POINTS is no longer supported.
|
void |
FormboardLayoutBuilder.setMainRunOrigin(Point mainRunOrigin)
License requirements: routing_harness ("Routing Harness") . |
void |
OrientBranchBuilder.setToPoint(Point toPoint)
Deprecated.
Deprecated in NX8.5.0. This
OrientBranchBuilder.BranchAngleMethod.TWO_POINTS is no longer supported.
|
Modifier and Type | Method and Description |
---|---|
Point |
DupinBuilder.analysisPoint()
Returns the point location defining where the analysis should be done.
|
Point[] |
CurveAnalysisPeaksBuilder.createPoints()
Deprecated.
Deprecated in NX8.5.0. Use
GeometricAnalysis.CurveCurvatureAnalysis .
|
Point[] |
CurveAnalysisInflectionsBuilder.createPoints()
Deprecated.
Deprecated in NX8.5.0. Use
GeometricAnalysis.CurveCurvatureAnalysis .
|
Point |
GapFlushnessBuilder.evaluationPoint()
Returns the evaluation point
License requirements: solid_modeling ("SOLIDS MODELING") . |
Modifier and Type | Method and Description |
---|---|
void |
DupinBuilder.setAnalysisPoint(Point analysisPoint)
License requirements: None. |
void |
GapFlushnessBuilder.setEvaluationPoint(Point evaluationPoint)
License requirements: solid_modeling ("SOLIDS MODELING") . |
Modifier and Type | Method and Description |
---|---|
Point |
RadialBuilder.specifiedRotationPoint()
Returns the rotation point
License requirements: None. |
Modifier and Type | Method and Description |
---|---|
void |
RadialBuilder.setSpecifiedRotationPoint(Point specifiedRotationPoint)
License requirements: studio_analyze ("STUDIO ANALYZE") . |
Modifier and Type | Field and Description |
---|---|
Point[] |
ControlPoleManagerData.PolesData.poles
Poles
|
Modifier and Type | Method and Description |
---|---|
Point |
BoundingObjectBuilder.boundingPoint()
Returns the bounding point.
|
Point |
BoundingObjectBuilder.boundingPoint1()
Returns the bounding point1.
|
Point |
BoundingObjectBuilder.boundingPoint2()
Returns the bounding point2.
|
Point |
BoundingObjectBuilder.boundingProjectPoint()
Returns the bounding project point.
|
Point |
ModlMotion.distanceBetweenPointsMeasurePoint()
Returns the measure point of
ModlMotion.Options.DISTANCE_BETWEEN_POINTS
motion option. |
Point |
ModlMotion.distanceBetweenPointsOriginPoint()
Returns the origin point of
ModlMotion.Options.DISTANCE_BETWEEN_POINTS
motion option. |
Point |
SplineExtensionBuilder.endPoint()
Returns the point up to which end is extended
License requirements: None. |
Point |
SelectDividingObjectBuilder.endPoint()
Returns the end point
License requirements: None. |
Point |
ModlMotion.endPoint()
Returns the end point of
ModlMotion.Options.ROTATE_BY_THREE_POINTS
motion option. |
Point |
CurveExtensionBuilder.endPoint()
Returns the point up to which end is extended
License requirements: None. |
Point |
GeneralPattern.fromLocationPoint()
Returns the from location point
License requirements: None. |
Point |
ModlMotion.fromPoint()
Returns the "from point" of
ModlMotion.Options.POINT_TO_POINT
motion option. |
Point |
BlendSetbackBuilder.handlePoint()
Returns the handle point for u/v direction.
|
Point |
BoundingObjectBuilder.intersectionReference()
Returns the intersection reference
License requirements: None. |
Point |
OrientationMethodBuilder.orientationPoint()
Returns the orientation point.
|
Point |
FacePlaneSelectionBuilder.planeHelpPoint()
Returns the user plane cap help point
License requirements: None. |
Point |
SectionPlaneData.planeOrigin()
Returns the origin of the plane
License requirements: studio_free_form ("STUDIO FREE FORM") . |
Point |
SectionPlaneData.planePoint1()
Returns the first point of the plane
License requirements: studio_free_form ("STUDIO FREE FORM") . |
Point |
SectionPlaneData.planePoint2()
Returns the second point of the plane
License requirements: studio_free_form ("STUDIO FREE FORM") . |
Point |
PatternReferencePointServiceBuilder.point()
Returns the reference point
License requirements: None. |
Point |
GeometryLocationData.point()
Returns the point
License requirements: None. |
Point |
ModlMotion.radialMeasurePoint()
Returns the measure point of
ModlMotion.Options.RADIAL_DISTANCE
motion option. |
Point |
PolygonPattern.rotationCenter()
Returns the rotation center for the 2d pattern.
|
Point |
CircularPattern.rotationCenter()
Returns the rotation center for the 2d pattern.
|
Point |
ScalingMethodBuilder.scalingPoint()
Returns the scaling point.
|
Point |
BlendSetbackBuilder.setbackPoint()
Returns the setback point for u/v direction.
|
Point |
SplineExtensionBuilder.startPoint()
Returns the point up to which start is extended
License requirements: None. |
Point |
SelectDividingObjectBuilder.startPoint()
Returns the start point
License requirements: None. |
Point |
ModlMotion.startPoint()
Returns the start point of
ModlMotion.Options.ROTATE_BY_THREE_POINTS
motion option. |
Point |
CurveExtensionBuilder.startPoint()
Returns the point up to which start is extended
License requirements: None. |
Point |
OnPathDimensionBuilder.throughPoint()
Returns the through point
License requirements: None. |
Point |
ModlMotion.toPoint()
Returns the point where object is moved for motion option
ModlMotion.Options.POINT_TO_POINT
License requirements: None. |
Point |
FtmTransformPointsBuilder.transformEndPoint()
Returns the end point that defines the end or target point constraint on the product shape
License requirements: None. |
Point |
FtmTransformPointsBuilder.transformStartPoint()
Returns the start point that defines the starting point constraint on the product shape
License requirements: None. |
Modifier and Type | Method and Description |
---|---|
void |
CurveShapingBuilder.applyParameterValue(Point sourcePoint,
Point[] destinationPoints)
Applies parameter value from a key point to a group of key points without affecting curve shape
License requirements: studio_free_form ("STUDIO FREE FORM") . |
void |
CurveShapingBuilder.applyParameterValue(Point sourcePoint,
Point[] destinationPoints)
Applies parameter value from a key point to a group of key points without affecting curve shape
License requirements: studio_free_form ("STUDIO FREE FORM") . |
BlendStopshortBuilder |
BlendStopshortBuilderCollection.create(BlendStopshortBuilder.Choices mChoice,
Expression mOnPathExp,
Edge mPath,
boolean mIsFlipped,
Point mThruPoint)
Creates an BlendStopshortBuilder.
|
void |
ControlPoleManagerData.deselectPoles(int groupIndex,
int[] polesIndex,
Point[] poles)
Removes selected pole
License requirements: studio_free_form ("STUDIO FREE FORM") . |
void |
ControlPoleManagerData.selectPoles(int groupIndex,
int[] polesIndex,
Point[] poles)
Adds new selected pole
License requirements: studio_free_form ("STUDIO FREE FORM") . |
void |
CurveShapingBuilder.setActivePoints(Point[] points,
Point masterPoint)
Sets key points that are selected or will be moved
License requirements: studio_free_form ("STUDIO FREE FORM") . |
void |
CurveShapingBuilder.setActivePoints(Point[] points,
Point masterPoint)
Sets key points that are selected or will be moved
License requirements: studio_free_form ("STUDIO FREE FORM") . |
void |
BoundingObjectBuilder.setBoundingPoint(Point point)
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING") . |
void |
BoundingObjectBuilder.setBoundingPoint1(Point point1)
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING") . |
void |
BoundingObjectBuilder.setBoundingPoint2(Point point2)
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING") . |
void |
BoundingObjectBuilder.setBoundingProjectPoint(Point projectPoint)
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING") . |
void |
ModlMotion.setDistanceBetweenPointsMeasurePoint(Point measurePoint)
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") . |
void |
ModlMotion.setDistanceBetweenPointsOriginPoint(Point originPoint)
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") . |
void |
SplineExtensionBuilder.setEndPoint(Point endPoint)
License requirements: features_modeling ("FEATURES MODELING") OR cam_base ("CAM BASE") . |
void |
SelectDividingObjectBuilder.setEndPoint(Point endPoint)
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") . |
void |
ModlMotion.setEndPoint(Point endPoint)
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") . |
void |
CurveExtensionBuilder.setEndPoint(Point endPoint)
License requirements: features_modeling ("FEATURES MODELING") . |
void |
GeneralPattern.setFromLocationPoint(Point point)
License requirements: None. |
void |
ModlMotion.setFromPoint(Point fromPoint)
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") . |
void |
BlendSetbackBuilder.setHandlePoint(Point handlePoint)
License requirements: solid_modeling ("SOLIDS MODELING") . |
void |
BoundingObjectBuilder.setIntersectionReference(Point intersectionReference)
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING") . |
void |
OrientationMethodBuilder.setOrientationPoint(Point orientationPoint)
License requirements: solid_modeling ("SOLIDS MODELING") . |
void |
FacePlaneSelectionBuilder.setPlaneHelpPoint(Point helpPoint)
License requirements: solid_modeling ("SOLIDS MODELING") . |
void |
SectionPlaneData.setPlaneOrigin(Point point)
License requirements: studio_free_form ("STUDIO FREE FORM") . |
void |
SectionPlaneData.setPlanePoint1(Point point)
License requirements: studio_free_form ("STUDIO FREE FORM") . |
void |
SectionPlaneData.setPlanePoint2(Point point)
License requirements: studio_free_form ("STUDIO FREE FORM") . |
void |
PatternReferencePointServiceBuilder.setPoint(Point point)
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") . |
void |
GeometryLocationData.setPoint(Point point)
License requirements: None. |
void |
ControlPoleManagerData.setPoles(int groupIndex,
int[] polesIndex,
Point[] poles)
Sets new group poles
License requirements: studio_free_form ("STUDIO FREE FORM") . |
void |
ModlMotion.setRadialMeasurePoint(Point radialMeasuPoint)
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") . |
void |
PolygonPattern.setRotationCenter(Point rotationCenter)
License requirements: None. |
void |
CircularPattern.setRotationCenter(Point rotationCenter)
License requirements: None. |
void |
ScalingMethodBuilder.setScalingPoint(Point scalingPoint)
License requirements: solid_modeling ("SOLIDS MODELING") . |
void |
BlendSetbackBuilder.setSetbackPoint(Point setbackPoint)
License requirements: solid_modeling ("SOLIDS MODELING") . |
void |
SplineExtensionBuilder.setStartPoint(Point startPoint)
License requirements: features_modeling ("FEATURES MODELING") OR cam_base ("CAM BASE") . |
void |
SelectDividingObjectBuilder.setStartPoint(Point startPoint)
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") . |
void |
ModlMotion.setStartPoint(Point startPoint)
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") . |
void |
CurveExtensionBuilder.setStartPoint(Point startPoint)
License requirements: features_modeling ("FEATURES MODELING") . |
void |
OnPathDimensionBuilder.setThroughPoint(Point throughPoint)
License requirements: None. |
void |
ModlMotion.setToPoint(Point toPoint)
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") . |
void |
FtmTransformPointsBuilder.setTransformEndPoint(Point transformEndPoint)
License requirements: None. |
void |
FtmTransformPointsBuilder.setTransformStartPoint(Point transformStartPoint)
License requirements: None. |
Modifier and Type | Method and Description |
---|---|
Point |
DefineComponentBuilder.anchorPoint()
Returns the anchor point to define the 2D Component
License requirements: None. |
Point |
DefineComponentAnchorPointBuilder.anchorPoint()
Returns the anchor point of a 2D Component
License requirements: None. |
Modifier and Type | Method and Description |
---|---|
void |
DefineComponentBuilder.setAnchorPoint(Point anchorPoint)
License requirements: nx_layout ("NX Layout") . |
void |
DefineComponentAnchorPointBuilder.setAnchorPoint(Point anchorPoint)
License requirements: nx_layout ("NX Layout") . |
Modifier and Type | Method and Description |
---|---|
Point |
VirtualAxisBuilder.anchorPoint()
Returns the anchor point
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER") . |
Point |
CylindricalJointBuilder.anchorPoint()
Returns the anchor point.
|
Point |
BallJointBuilder.anchorPoint()
Returns the anchor point.
|
Point |
LinearSpringJointBuilder.attachmentPoint()
Returns the attachment point.
|
Point |
LinearLimitJointBuilder.attachmentPoint()
Returns the attachment point.
|
Point |
LinearSpringJointBuilder.basePoint()
Returns the base point.
|
Point |
LinearLimitJointBuilder.basePoint()
Returns the base point.
|
Point |
TransportSurfaceBuilder.centerPoint()
Returns the center point
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER") . |
Point |
SlidingJointBuilder.feedbackPoint()
Returns the position of visual feedback point.
|
Point |
FixedJointBuilder.feedbackPoint()
Returns the position of visual feedback point.
|
Point |
AngularSpringJointBuilder.feedbackPoint()
Returns the position of visual feedback point.
|
Point |
AngularLimitJointBuilder.feedbackPoint()
Returns the position of visual feedback point.
|
Point |
RigidBodyBuilder.massCenterPoint()
Returns the mass center point.
|
Point |
HingeJointBuilder.point()
Returns the origin point.
|
Point |
PointOnCurveJointBuilder.pointOnCurve()
Returns the selected point on curve
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER") . |
Point |
PathConstraintJointBuilder.pointOnCurve()
Returns the selected point on curve
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER") . |
Point |
CurveOnCurveJointBuilder.pointOnCurve()
Returns the selected point on curve
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER") . |
Modifier and Type | Method and Description |
---|---|
void |
VirtualAxisBuilder.setAnchorPoint(Point point)
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER") . |
void |
CylindricalJointBuilder.setAnchorPoint(Point anchorPoint)
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER") . |
void |
BallJointBuilder.setAnchorPoint(Point anchorPoint)
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER") . |
void |
LinearSpringJointBuilder.setAttachmentPoint(Point attachmentPoint)
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER") . |
void |
LinearLimitJointBuilder.setAttachmentPoint(Point attachmentPoint)
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER") . |
void |
LinearSpringJointBuilder.setBasePoint(Point basePoint)
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER") . |
void |
LinearLimitJointBuilder.setBasePoint(Point basePoint)
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER") . |
void |
TransportSurfaceBuilder.setCenterPoint(Point centerPoint)
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER") . |
void |
SlidingJointBuilder.setFeedbackPoint(Point feedback)
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER") . |
void |
FixedJointBuilder.setFeedbackPoint(Point feedback)
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER") . |
void |
AngularSpringJointBuilder.setFeedbackPoint(Point feedback)
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER") . |
void |
AngularLimitJointBuilder.setFeedbackPoint(Point feedback)
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER") . |
void |
RigidBodyBuilder.setMassCenterPoint(Point center)
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER") . |
void |
HingeJointBuilder.setPoint(Point point)
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER") . |
void |
PointOnCurveJointBuilder.setPointOnCurve(Point pointOnCurve)
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER") . |
void |
PathConstraintJointBuilder.setPointOnCurve(Point pointOnCurve)
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER") . |
void |
CurveOnCurveJointBuilder.setPointOnCurve(Point pointOnCurve)
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER") . |
Modifier and Type | Method and Description |
---|---|
Point |
ScalarForceBuilder.actionPoint()
Returns the action point
License requirements: None. |
Point |
ConnectorBuilder.actionPoint()
Returns the action point.
|
Point |
BushingDefine.actionPoint()
Returns the action point
License requirements: None. |
Point |
CouplerBuilder.contactPoint()
Returns the contact point
License requirements: None. |
Point |
JointDefine.firstOrigin()
Returns the origin of first link
License requirements: mechanisms ("MECHANISMS") . |
Point |
LinkMassProperty.massCenter()
Returns the mass center
License requirements: None. |
Point |
VObject.origin()
Returns the origin
License requirements: None. |
Point |
MarkerBuilder.originPoint()
Returns the origin point
License requirements: None. |
Point |
PointOnSurfaceBuilder.point()
Returns the selected point
License requirements: None. |
Point |
PointOnCurveBuilder.point()
Returns the selected point
License requirements: None. |
Point |
ScalarForceBuilder.reactionPoint()
Returns the reaction point
License requirements: None. |
Point |
ConnectorBuilder.reactionPoint()
Returns the reaction point.
|
Point |
BushingDefine.reactionPoint()
Returns the reaction point
License requirements: None. |
Point |
JointDefine.secondOrigin()
Returns the origin of second link
License requirements: mechanisms ("MECHANISMS") . |
Modifier and Type | Method and Description |
---|---|
Marker |
MarkerCollection.create(String name,
Marker.MarkerType subtype,
Link link,
Point origin,
NXMatrix orientation)
Create a
Marker in the Scenario for Motion+ database. |
void |
ScalarForceBuilder.setActionPoint(Point actionPoint)
License requirements: mechanisms ("MECHANISMS") . |
void |
ConnectorBuilder.setActionPoint(Point actionPoint)
License requirements: mechanisms ("MECHANISMS") . |
void |
BushingDefine.setActionPoint(Point actionPoint)
License requirements: mechanisms ("MECHANISMS") . |
void |
CouplerBuilder.setContactPoint(Point contactPt)
Sets the contact point
License requirements: None. |
void |
JointDefine.setFirstOrigin(Point origin1)
Sets the origin of first link
License requirements: mechanisms ("MECHANISMS") . |
void |
LinkMassProperty.setMassCenter(Point massCenter)
License requirements: mechanisms ("MECHANISMS") . |
void |
VObject.setOrigin(Point origin)
License requirements: mechanisms ("MECHANISMS") . |
void |
MarkerBuilder.setOriginPoint(Point originPoint)
License requirements: mechanisms ("MECHANISMS") . |
void |
PointOnSurfaceBuilder.setPoint(Point point)
License requirements: mechanisms ("MECHANISMS") . |
void |
PointOnCurveBuilder.setPoint(Point point)
License requirements: mechanisms ("MECHANISMS") . |
void |
ScalarForceBuilder.setReactionPoint(Point reactionPoint)
License requirements: mechanisms ("MECHANISMS") . |
void |
ConnectorBuilder.setReactionPoint(Point reactionPoint)
License requirements: mechanisms ("MECHANISMS") . |
void |
BushingDefine.setReactionPoint(Point reactionPoint)
License requirements: mechanisms ("MECHANISMS") . |
void |
JointDefine.setSecondOrigin(Point origin2)
Sets the origin of second link
License requirements: mechanisms ("MECHANISMS") . |
Modifier and Type | Field and Description |
---|---|
Point |
SplinePathBuilder.OffsetData.basepoint
The base point frim the offset object.
|
Point |
StockOffsetPointBuilder.PointData.basePoint
Base point for stock offset points, null for
Routing.StockOffsetPointBuilder.PointType#NORMAL points. |
Point[] |
RouteManager.GenerateCablewaysLayoutData.points |
Point[] |
ManualRouteBuilder.CreateValidPointsOnPathsData.validpoints |
Modifier and Type | Method and Description |
---|---|
Point[] |
SplinePathBuilder.askDefiningData()
When a spline is selected for editing, the builder will anaylyze the spline
and gather all of the defining data.
|
Point |
StockOffsetPointBuilder.constraintPoint()
Returns the point that defines the location of the selected point.
|
Point |
OverstockApplication.endPointOfOverstock()
Returns the end point of overstock on the path.
|
Point |
FormboardFrame.getReferencePoint()
Query the formboard frame reference point
License requirements: routing_harness ("Routing Harness") . |
Point |
OverstockApplication.midPointOfOverstock()
Returns the mid point of overstock on the path.
|
Point |
IRoutePosition.point()
Returns the
Point that specifies the location of the
IRoutePosition object. |
Point |
OverstockApplication.startPointOfOverstock()
Returns the start point of overstock on the path.
|
Point |
RouteSweptTwistBuilder.twistPoint()
Returns the twist point
License requirements: routing_harness ("Routing Harness") . |
Modifier and Type | Method and Description |
---|---|
int |
SplinePathBuilder.addDefiningPointToSpline(Point point,
boolean createNewPoint)
Adds a defining point to the current spline or creates the first
point of the new spline.
|
void |
QuickPathBuilder.assignExtension(Point point,
Vector3d direction,
double backValue,
double fwdValue)
Assigns a direction as well as a forward and backward distance to
the given point.
|
void |
SplinePathBuilder.commitDrag(Point definingPoint)
Clears the current drag network
License requirements: routing_base ("Routing Basic") . |
OverstockApplication |
OverstockApplicationCollection.convertOverstockApplication(ControlPoint startControlPoint,
ISegment[] segments,
Stock[] stocks,
Expression startOffset,
Expression endOffset,
Expression pieceLength,
Expression gap,
Expression numberOfPieces,
Point startPoint,
CharacteristicList overstockPart,
CharacteristicList reqOptCharxList,
Expression wrapValue,
Overstock[] overstocks)
Converts an existing
Overstock to
Routing.Method#INTERVAL overstock. |
OverstockApplication |
OverstockApplicationCollection.convertOverstockApplication(ControlPoint startControlPoint,
ISegment[] segments,
Stock[] stocks,
Point startPoint,
Point endPoint,
CharacteristicList overstockPart,
CharacteristicList reqOptCharxList,
Expression wrapValue,
Overstock[] overstocks)
Converts an existing
Overstock to
Routing.Method#POINT_TO_POINT overstock. |
OverstockApplication |
OverstockApplicationCollection.convertOverstockApplication(ControlPoint startControlPoint,
ISegment[] segments,
Stock[] stocks,
Point definingPoint,
PointDefinition definingDirection,
Expression pieceLength,
CharacteristicList overstockPart,
CharacteristicList reqOptCharxList,
Expression wrapValue,
Overstock[] overstocks)
Converts an existing
Overstock to
Routing.Method#POINT_AND_LENGTH overstock. |
Anchor |
AnchorCollection.createAnchor(Point3d position,
Point point)
Creates a
Anchor object. |
FormboardFrame |
FormboardFrameCollection.createFormboardFrameByRectangle(Point point,
Scalar height,
Scalar width)
Creates a
FormboardFrame object
using a rectangle defined by a Point object and
two Scalar objects that represent the height and width. |
OverstockApplication |
OverstockApplicationCollection.createOverstockApplication(ControlPoint startControlPoint,
ISegment[] segments,
Stock[] stocks,
Expression startOffset,
Expression endOffset,
Expression pieceLength,
Expression gap,
Expression numberOfPieces,
Point startPoint,
CharacteristicList overstockPart,
WrapApplicationType stockWrapType,
Expression wrapValue)
Creates an
OverstockApplication using the Interval method of application. |
OverstockApplication |
OverstockApplicationCollection.createOverstockApplication(ControlPoint startControlPoint,
ISegment[] segments,
Stock[] stocks,
Point startPoint,
Point endPoint,
CharacteristicList overstockPart,
WrapApplicationType stockType,
Expression wrapValue)
Creates an
OverstockApplication using the
Point to Point method of application. |
OverstockApplication |
OverstockApplicationCollection.createOverstockApplication(ControlPoint startControlPoint,
ISegment[] segments,
Stock[] stocks,
Point definingPoint,
PointDefinition definingDirection,
Expression pieceLength,
CharacteristicList overstockPart,
WrapApplicationType stockWrapType,
Expression wrapValue)
Creates the
Routing.Method#POINT_AND_LENGTH
overstock by the Point and Length method. |
ManualRouteBuilder.FindPathsFromMultiplePointsData |
ManualRouteBuilder.findPathsFromMultiplePoints(Point[] points)
This function returns all possible paths which are passing through all the given points.
|
void |
StockOffsetPointBuilder.setConstraintPoint(Point point)
Sets the point that defines the location of the selected point.
|
void |
LinearPathBuilder.setControlPointDefiningPoint(ControlPoint previewRcp,
Point point)
Fully defines a preview control point using the given point.
|
void |
IRoutePosition.setPoint(Point point)
Sets the
Point that specifies the location of the
IRoutePosition object. |
void |
FormboardFrame.setReferencePoint(Point referencePoint)
Sets the formboard frame reference point
License requirements: routing_harness ("Routing Harness") . |
void |
RouteSweptTwistBuilder.setTwistPoint(Point twistPoint)
License requirements: routing_harness ("Routing Harness") . |
void |
SplinePathBuilder.updateDefiningPointPositionAtIndex(int index,
Point point,
boolean inDrag)
Updates the position of a point on the spline.
|
boolean |
ManualRouteBuilder.updateFilterPaths(Point point)
This function updates the filter paths in builder, using the given selected point.
|
Modifier and Type | Method and Description |
---|---|
Point |
AssignProxyBuilder.point()
Returns the position of the proxy port to be created.
|
Modifier and Type | Method and Description |
---|---|
void |
AssignProxyBuilder.setPoint(Point point)
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic") . |
Modifier and Type | Method and Description |
---|---|
Point |
BlankLayoutBuilder.basePoint()
Returns the base point.
|
Point |
WireHoleBuilder.circleCenter()
Returns the circle center to create wire hole
License requirements: None. |
Point |
InsertAuxiliaryBuilder.controlPoint()
Returns the control point for the copy operation.
|
Point |
InsertAuxiliaryBuilder.destinationPoint()
Returns the destination point for the copy operation.
|
Point |
ChannelFittingBuilder.fittingPoint()
Returns the new point specified for the cooling fitting point.
|
Point |
ConceptPositionBuilder.locatedPoint()
Returns the located point
License requirements: None. |
Point |
InsertAuxiliaryBuilder.pointForRamp()
Returns the tangent point for the sweep guide curve
License requirements: None. |
Point |
LayoutRepositionBuilder.pointFrom()
Returns the transform start point
License requirements: None. |
Point |
DieEngFormTaskBuilder.pointInRegion()
Returns the point in region
License requirements: None. |
Point |
LayoutRepositionBuilder.pointTo()
Returns the transform end point
License requirements: None. |
Point |
WorkpieceBuilder.referencePoint()
Returns the reference point to generate the work piece
License requirements: None. |
Point |
StandardPartPositionBuilder.referencePosition()
Returns the reference point position.
|
Point |
LayoutRepositionBuilder.rotatePoint()
Returns the rotate point
License requirements: None. |
Point |
LayoutBuilder.rotatePoint()
Returns the rotate point
License requirements: None. |
Point |
SlugRetentionBuilder.selectPoint()
Returns the select point
License requirements: None. |
Point |
SectionLineCreationBuilder.selectPoint()
Returns the pnt select point
License requirements: None. |
Point |
CoolingDefineChannelBuilder.startPoint()
Returns the point as the start position of the channel.
|
Point |
CoolingConnectBuilder.startPoint()
Returns the point for changing the start position of the connecting channel.
|
Point |
AssemblyDrawingBuilder.viewLocation()
Returns the view location
License requirements: None. |
Modifier and Type | Method and Description |
---|---|
void |
CoolingFittingData.addFittingPoints(Point fittingPoint)
Add cooling fitting points to the fitting data.
|
void |
BlankLayoutBuilder.setBasePoint(Point point)
License requirements: None. |
void |
WireHoleBuilder.setCircleCenter(Point circleCenter)
License requirements: None. |
void |
InsertAuxiliaryBuilder.setControlPoint(Point specifyControlPoint)
License requirements: None. |
void |
InsertAuxiliaryBuilder.setDestinationPoint(Point specifyDestinationPoint)
License requirements: None. |
void |
ChannelFittingBuilder.setFittingPoint(Point fittingPoint)
License requirements: None. |
void |
ConceptPositionBuilder.setLocatedPoint(Point locatedPoint)
License requirements: None. |
void |
InsertAuxiliaryBuilder.setPointForRamp(Point pointForRamp)
License requirements: None. |
void |
LayoutRepositionBuilder.setPointFrom(Point pointFrom)
License requirements: None. |
void |
DieEngFormTaskBuilder.setPointInRegion(Point pointInRegion)
License requirements: die_engineering ("DIE ENGINEERING") . |
void |
LayoutRepositionBuilder.setPointTo(Point pointTo)
License requirements: None. |
void |
WorkpieceBuilder.setReferencePoint(Point referencePoint)
License requirements: None. |
void |
StandardPartPositionBuilder.setReferencePosition(Point refPos)
License requirements: ug_mold_design ("UG MOLD") OR nx_electrode_wizard ("NX Electrode Wizard") OR prog_die_wizard ("UG/Progressive Die Wizard") . |
void |
LayoutRepositionBuilder.setRotatePoint(Point rotatePoint)
License requirements: None. |
void |
LayoutBuilder.setRotatePoint(Point rotatePoint)
License requirements: None. |
void |
SlugRetentionBuilder.setSelectPoint(Point selectPoint)
License requirements: prog_die_wizard ("UG/Progressive Die Wizard") . |
void |
SectionLineCreationBuilder.setSelectPoint(Point pntSelectPoint)
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard") . |
void |
CoolingDefineChannelBuilder.setStartPoint(Point startPoint)
License requirements: None. |
void |
CoolingConnectBuilder.setStartPoint(Point startPoint)
License requirements: None. |
void |
AssemblyDrawingBuilder.setViewLocation(Point viewLocation)
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard") . |
Modifier and Type | Method and Description |
---|---|
Point |
WeldFillBuilder.corner1()
Returns the first corner of the boundary if the
WeldFillBuilder.BoundaryMethodType.RECTANGLE
option is specified for the boundary type. |
Point |
WeldFillBuilder.corner2()
Returns the second corner of the boundary if the
WeldFillBuilder.BoundaryMethodType.RECTANGLE
option is specified for the boundary type. |
Point |
JointmarkPointsBuilder.point()
Returns the point at which the feature is created
License requirements: ugweld ("UG WELD") . |
Modifier and Type | Method and Description |
---|---|
void |
WeldFillBuilder.setCorner1(Point corner1)
License requirements: ugweld ("UG WELD") . |
void |
WeldFillBuilder.setCorner2(Point corner2)
License requirements: ugweld ("UG WELD") . |
void |
JointmarkPointsBuilder.setPoint(Point point)
License requirements: ugweld ("UG WELD") . |
Copyright 2011 Siemens Product Lifecycle Management Software Inc. All Rights Reserved.