Package | Description |
---|---|
nxopen.cam |
Provides classes and interfaces for Manufacturing.
|
nxopen.sim |
Provides classes and interfaces for Machine Tool Builder and CAM-Simulation.
|
Modifier and Type | Interface and Description |
---|---|
interface |
CAMSetup
|
interface |
CavityMilling
Represents a Cavity Milling Operation
To create or edit an instance of this class, use CavityMillingBuilder Created in NX7.5.0 |
interface |
CenterlineDrillTurning
Represents a Centerline Drill Turning operation
To create or edit an instance of this class, use CenterlineDrillTurningBuilder Created in NX7.5.0 |
interface |
ChamferMilling
Represents a Chamfer Milling Operation
To create or edit an instance of this class, use ChamferMillingBuilder Created in NX9.0.2 |
interface |
CylinderMilling
Represents a Cylinder Milling Operation
To create or edit an instance of this class, use CylinderMillingBuilder Created in NX9.0.1 |
interface |
Engraving
Represents a Engraving Operation
To create or edit an instance of this class, use EngravingBuilder Created in NX7.5.0 |
interface |
FaceMilling
Represents a Face Milling Operation
To create or edit an instance of this class, use FaceMillingBuilder Created in NX7.5.0 |
interface |
FeatureMilling
Represents a Feature Milling Operation
To create or edit an instance of this class, use FeatureMillingBuilder Created in NX7.5.0 |
interface |
FinishTurning
Represents a Turn Finishing operation
To create or edit an instance of this class, use FinishTurningBuilder Created in NX7.5.0 |
interface |
GenericMotionControl
Represents a Generic Motion Control operation
To create or edit an instance of this class, use GmcOpBuilder Created in NX7.5.0 |
interface |
GrooveMilling
Represents a Groove Milling Operation
To create or edit an instance of this class, use GrooveMillingBuilder Created in NX9.0.0 |
interface |
HoleDrilling
Represents a Hole Drilling Operation
To create or edit an instance of this class, use HoleDrillingBuilder Created in NX9.0.1 |
interface |
HoleMaking
Represents a Hole Making operation
To create or edit an instance of this class, use HoleMakingBuilder Created in NX7.5.0 |
interface |
InspectionMoveSubop
Represents CMM Inspection Move
To obtain an instance of this class use InspectionMoveCollection Created in NX7.0.0 |
interface |
InspectionOperation
Represents an Inspection operation
To obtain an instance of this class use InspectionOperationCollection Created in NX7.0.0 |
interface |
InspectionSetup
|
interface |
LatheMachineControl
Represents a Lathe Machine Control operation
To create or edit an instance of this class, use LatheMachineControlBuilder Created in NX7.5.0 |
interface |
LatheUserDefined
Represents a Lathe User Defined operation
To create or edit an instance of this class, use LatheUserDefinedBuilder Created in NX7.5.0 |
interface |
ManualMove
Represents Manual Move
To obtain an instance of this class us OperationCollection Created in NX4.0.0 |
interface |
MillMachineControl
Represents a Mill Machine Control operation
To create or edit an instance of this class, use MillMachineControlBuilder Created in NX7.5.0 |
interface |
MillOperation
Represents a Mill operation
To create or edit an instance of this class, use MillOperationBuilder Created in NX7.5.0 |
interface |
MillToolProbing
Represents a Mill Tool operation
To create or edit an instance of this class, use MillToolProbingBuilder Created in NX8.5.1 |
interface |
MillUserDefined
Represents a Mill User Defined operation
To create or edit an instance of this class, use MillUserDefinedBuilder Created in NX7.5.0 |
interface |
Move
|
interface |
Operation
Represents an operation
To create or edit an instance of this class, use OperationBuilder Created in NX4.0.0 |
interface |
PlanarMilling
Represents a Planar Milling Operation
To create or edit an instance of this class, use PlanarMillingBuilder Created in NX7.5.0 |
interface |
PlanarOperation
Represents a Planar operation
To create or edit an instance of this class, use PlanarOperationBuilder Created in NX7.5.0 |
interface |
PlungeMilling
Represents a Plunge Milling Operation
To create or edit an instance of this class, use PlungeMillingBuilder Created in NX7.5.0 |
interface |
ProbeTrackPoint
Represents an Track Point
To obtain an instance of this class us TrackPointCollection Created in NX4.0.0 |
interface |
RoughFinishTurning
Represents a Turn Rough Finish operation
To create or edit an instance of this class, use RoughFinishTurningBuilder Created in NX7.5.0 |
interface |
RoughTurning
Represents a Turn Rough operation
To create or edit an instance of this class, use RoughTurningBuilder Created in NX7.5.0 |
interface |
SolidTrackPoint
Represents an Track Point
To obtain an instance of this class us TrackPointCollection Created in NX4.0.0 |
interface |
SurfaceContour
Represents a Surface Contour operation
To create or edit an instance of this class, use SurfaceContourBuilder Created in NX7.5.0 |
interface |
TeachmodeTurning
Represents a Turning Teachmode operation
To create or edit an instance of this class, use TeachmodeTurningBuilder Created in NX7.5.0 |
interface |
ThreadMilling
Represents a Thread Milling Operation
To create or edit an instance of this class, use ThreadMillingBuilder Created in NX7.5.0 |
interface |
ThreadTurning
Represents a Thread Turning operation
To create or edit an instance of this class, use ThreadTurningBuilder Created in NX7.5.0 |
interface |
TrackPoint
Represents an Track Point
To obtain an instance of this class us TrackPointCollection Created in NX4.0.0 |
interface |
TurningOperation
Represents a Turning operation
To create or edit an instance of this class, use TurningOperationBuilder Created in NX7.5.0 |
interface |
TurnPartProbing
Represents a Turn Part Probing operation
To create or edit an instance of this class, use TurnPartProbingBuilder Created in NX8.5.1 |
interface |
TurnToolProbing
Represents a Turn tool operation
To create or edit an instance of this class, use TurnToolProbingBuilder Created in NX8.5.1 |
interface |
UserDefinedOpr
Represents a User Defined operation
To create or edit an instance of this class, use UserDefinedOprBuilder Created in NX7.5.0 |
interface |
VariableZLevelMilling
Represents a Variable Z Level Milling Operation
To create or edit an instance of this class, use VazlMillingBuilder Created in NX7.5.0 |
interface |
VolumeBased25DMillingOperation
Represents a Floor Wall Milling Operation
To create or edit an instance of this class, use VolumeBased25DMillingOperationBuilder Created in NX8.5.0 |
interface |
WedmMachineControl
Represents a WEDM Machine Control operation
To create or edit an instance of this class, use WedmMachineControlBuilder Created in NX7.5.0 |
interface |
WedmUserDefined
Represents a User Defined WEDM operation
To create or edit an instance of this class, use WedmUserDefinedBuilder Created in NX7.5.0 |
interface |
ZLevelMilling
Represents a Z Level Milling Operation
To create or edit an instance of this class, use ZLevelMillingBuilder Created in NX7.5.0 |
Modifier and Type | Field and Description |
---|---|
CAMObject |
CAMObject.ErrorItem.objectTag |
CAMObject |
BlankIpw.SourceData.source
the blank IPW source
|
Modifier and Type | Method and Description |
---|---|
CAMObject[] |
InspectionSetup.copyObjects(CAMSetup.View view,
CAMObject[] objectsToBeMoved,
CAMObject destinationObject,
CAMSetup.Paste pastePosition)
Copy objects
License requirements: insp_programming ("INSPECTION PROGRAMMING") . |
CAMObject[] |
CAMSetup.copyObjects(CAMSetup.View view,
CAMObject[] objectsToBeMoved,
CAMObject destinationObject,
CAMSetup.Paste pastePosition)
Copy objects
License requirements: cam_base ("CAM BASE") . |
CAMObject[] |
CAMSetup.copyObjectsWithReference(CAMSetup.View view,
CAMObject[] objectsToBeMoved,
CAMObject destinationObject,
CAMSetup.Paste pastePosition)
Copy objects with reference
License requirements: cam_base ("CAM BASE") . |
CAMObject |
CAMSetup.getCamExitObject()
Get the param object which is invoking the exit API
License requirements: cam_base ("CAM BASE") . |
CAMObject[] |
InspectionSaveToLayerBuilder.getSelectedOps()
Returns the selected operations.
|
CAMObject[] |
InspectionDeleteMeaPtsBuilder.getSelectedOps()
Returns the selected operations.
|
Modifier and Type | Method and Description |
---|---|
void |
InspectionAnalyzeBuilder.analyzeSelected(CAMObject[] objects)
Run Analysis for Selected Operations
License requirements: insp_programming ("INSPECTION PROGRAMMING") . |
void |
CAMSetup.approveObjects(CAMObject[] objects)
Approve objects
License requirements: cam_base ("CAM BASE") . |
void |
InspectionSetup.bufferObjects(CAMSetup.View view,
CAMObject[] objectsToBeBuffered)
Buffer objects to the clipboard and prepare for copy later
License requirements: insp_programming ("INSPECTION PROGRAMMING") . |
void |
CAMSetup.bufferObjects(CAMSetup.View view,
CAMObject[] objectsToBeBuffered)
Buffer objects to the clipboard and prepare for copy later
License requirements: cam_base ("CAM BASE") . |
CAMObject[] |
InspectionSetup.copyObjects(CAMSetup.View view,
CAMObject[] objectsToBeMoved,
CAMObject destinationObject,
CAMSetup.Paste pastePosition)
Copy objects
License requirements: insp_programming ("INSPECTION PROGRAMMING") . |
CAMObject[] |
InspectionSetup.copyObjects(CAMSetup.View view,
CAMObject[] objectsToBeMoved,
CAMObject destinationObject,
CAMSetup.Paste pastePosition)
Copy objects
License requirements: insp_programming ("INSPECTION PROGRAMMING") . |
CAMObject[] |
CAMSetup.copyObjects(CAMSetup.View view,
CAMObject[] objectsToBeMoved,
CAMObject destinationObject,
CAMSetup.Paste pastePosition)
Copy objects
License requirements: cam_base ("CAM BASE") . |
CAMObject[] |
CAMSetup.copyObjects(CAMSetup.View view,
CAMObject[] objectsToBeMoved,
CAMObject destinationObject,
CAMSetup.Paste pastePosition)
Copy objects
License requirements: cam_base ("CAM BASE") . |
CAMObject[] |
CAMSetup.copyObjectsWithReference(CAMSetup.View view,
CAMObject[] objectsToBeMoved,
CAMObject destinationObject,
CAMSetup.Paste pastePosition)
Copy objects with reference
License requirements: cam_base ("CAM BASE") . |
CAMObject[] |
CAMSetup.copyObjectsWithReference(CAMSetup.View view,
CAMObject[] objectsToBeMoved,
CAMObject destinationObject,
CAMSetup.Paste pastePosition)
Copy objects with reference
License requirements: cam_base ("CAM BASE") . |
CavityMillingBuilder |
OperationCollection.createCavityMillingBuilder(CAMObject param)
Creates a planar milling cavity operation builder
License requirements: cam_base ("CAM BASE") . |
CenterlineDrillTurningBuilder |
OperationCollection.createCenterlineDrillTurningBuilder(CAMObject param)
Creates a centerline drill turning operation builder
License requirements: cam_base ("CAM BASE") . |
ChamferMillingBuilder |
OperationCollection.createChamferMillingBuilder(CAMObject param)
Creates a Chamfer Milling operation builder
License requirements: cam_base ("CAM BASE") . |
CylinderMillingBuilder |
OperationCollection.createCylinderMillingBuilder(CAMObject param)
Creates a Cylinder Milling operation builder
License requirements: cam_base ("CAM BASE") . |
DPMItpBuilder |
OperationCollection.createDpmitpBuilder(CAMObject param)
Creates an itp builder
License requirements: cam_base ("CAM BASE") . |
EngravingBuilder |
OperationCollection.createEngravingBuilder(CAMObject param)
Creates a planar milling text operation builder
License requirements: cam_base ("CAM BASE") . |
FaceMillingBuilder |
OperationCollection.createFaceMillingBuilder(CAMObject param)
Creates a planar milling facing operation builder
License requirements: cam_base ("CAM BASE") . |
FeatureMillingBuilder |
OperationCollection.createFeatureMillingBuilder(CAMObject param)
Creates a planar milling hole (feature based) operation builder
License requirements: cam_base ("CAM BASE") . |
FeatureRecognitionBuilder |
CAMSetup.createFeatureRecognitionBuilder(CAMObject param)
Creates a CAM.FeatureRecognitionBuilder
License requirements: cam_base ("CAM BASE") Created in NX6.0.0 |
FeatureTeaching |
CAMSetup.createFeatureTeaching(CAMObject param)
Creates a CAM.FeatureTeaching
License requirements: cam_base ("CAM BASE") Created in NX8.0.0 |
ObjectsFeedsBuilder |
CAMSetup.createFeedsBuilder(CAMObject[] params)
Create Feeds builder.
|
FeedsOptimizeBuilder |
CAMSetup.createFeedsOptimizeBuilder(CAMObject param)
Creates a feeds optimize builder
License requirements: cam_base ("CAM BASE") . |
FinishTurningBuilder |
OperationCollection.createFinishTurningBuilder(CAMObject param)
Creates a finish turning operation builder
License requirements: cam_base ("CAM BASE") . |
GmcOpBuilder |
OperationCollection.createGmcopBuilder(CAMObject param)
Creates GmcOp builder
License requirements: cam_base ("CAM BASE") . |
GrooveMillingBuilder |
OperationCollection.createGrooveMillingBuilder(CAMObject param)
Creates a Groove Milling operation builder
License requirements: cam_base ("CAM BASE") . |
HoleDrillingBuilder |
OperationCollection.createHoleDrillingBuilder(CAMObject param)
Creates a Hole Drilling operation builder
License requirements: cam_base ("CAM BASE") . |
HoleMakingBuilder |
OperationCollection.createHoleMakingBuilder(CAMObject param)
Creates a hole making operation builder
License requirements: cam_base ("CAM BASE") . |
InspectionAlignmentBuilder |
InspectionOperationCollection.createInspectionAlignmentBuilder(CAMObject param)
Creates an Inspection Alignment Builder
License requirements: insp_programming ("INSPECTION PROGRAMMING") . |
InspectionAnalyzeBuilder |
InspectionOperationCollection.createInspectionAnalyzeBuilder(CAMObject param)
Creates a CMM Inspection Analyze dialog builder
License requirements: insp_programming ("INSPECTION PROGRAMMING") . |
InspectionAnalyzeOutputBuilder |
InspectionOperationCollection.createInspectionAnalyzeOutputBuilder(CAMObject param)
Creates a CMM Inspection Analyze Output dialog builder
License requirements: insp_programming ("INSPECTION PROGRAMMING") . |
InspectionArcFeatureBuilder |
InspectionOperationCollection.createInspectionArcFeatureBuilder(CAMObject param)
Creates a CMM Inspection Arc Feature Builder
License requirements: insp_programming ("INSPECTION PROGRAMMING") . |
InspectionCircleFeatureBuilder |
InspectionOperationCollection.createInspectionCircleFeatureBuilder(CAMObject param)
Creates an Inspection Circle Feature Builder
License requirements: insp_programming ("INSPECTION PROGRAMMING") . |
InspectionCmmCommandBuilder |
InspectionOperationCollection.createInspectionCmmCommandBuilder(CAMObject param)
Creates a CMM Inspection Cmm Command Builder
License requirements: insp_programming ("INSPECTION PROGRAMMING") . |
InspectionCollisionAvoidanceBuilder |
InspectionOperationCollection.createInspectionCollisionAvoidanceBuilder(CAMObject param)
Creates a CMM Inspection Collision Avoidance dialog builder
License requirements: insp_programming ("INSPECTION PROGRAMMING") . |
InspectionConeFeatureBuilder |
InspectionOperationCollection.createInspectionConeFeatureBuilder(CAMObject param)
Creates an Inspection Cone Feature Builder
License requirements: insp_programming ("INSPECTION PROGRAMMING") . |
InspectionConstructedFeatureBuilder |
InspectionOperationCollection.createInspectionConstructedFeatureBuilder(CAMObject param)
Creates an Inspection Constructed Feature Builder
License requirements: insp_programming ("INSPECTION PROGRAMMING") . |
InspectionCparlnFeatureBuilder |
InspectionOperationCollection.createInspectionCparlnFeatureBuilder(CAMObject param)
Creates an Inspection Cparln Feature Builder
License requirements: insp_programming ("INSPECTION PROGRAMMING") . |
InspectionCreatePathsBuilder |
InspectionOperationCollection.createInspectionCreatePathsBuilder(CAMObject param)
Creates a CMM Inspection Create Paths dialog builder
License requirements: insp_programming ("INSPECTION PROGRAMMING") . |
InspectionCurveFeatureBuilder |
InspectionOperationCollection.createInspectionCurveFeatureBuilder(CAMObject param)
Creates an Inspection Curve Feature Builder
License requirements: insp_programming ("INSPECTION PROGRAMMING") . |
InspectionCylinderFeatureBuilder |
InspectionOperationCollection.createInspectionCylinderFeatureBuilder(CAMObject param)
Creates an Inspection Cylinder Feature Builder
License requirements: insp_programming ("INSPECTION PROGRAMMING") . |
InspectionDeleteMeaPtsBuilder |
InspectionOperationCollection.createInspectionDeleteMeaPtsBuilderSel(CAMObject[] selOps)
Creates a CMM Inspection Delete Analyze Points dialog builder with selected operations
License requirements: insp_programming ("INSPECTION PROGRAMMING") . |
InspectionEdgePointFeatureBuilder |
InspectionOperationCollection.createInspectionEdgePointFeatureBuilder(CAMObject param)
Creates a CMM Inspection Edge Point Feature dialog builder
License requirements: insp_programming ("INSPECTION PROGRAMMING") . |
InspectionLineFeatureBuilder |
InspectionOperationCollection.createInspectionLineFeatureBuilder(CAMObject param)
Creates an Inspection Line Feature Builder
License requirements: insp_programming ("INSPECTION PROGRAMMING") . |
InspectionLinkPmiBuilder |
InspectionOperationCollection.createInspectionLinkPmiBuilder(CAMObject param)
Creates a CMM Inspection Link PMI dialog builder
License requirements: insp_programming ("INSPECTION PROGRAMMING") . |
InspectionMeasDataBuilder |
InspectionOperationCollection.createInspectionMeasDataBuilder(CAMObject param)
Creates a CMM Inspection Analyze Measured Data dialog builder
License requirements: insp_programming ("INSPECTION PROGRAMMING") . |
InspectionOperationTransformBuilder |
InspectionOperationCollection.createInspectionOperationTransformBuilder(CAMObject[] objectsToTransform)
Creates a CMM Inspection Operation Transform dialog builder
License requirements: insp_programming ("INSPECTION PROGRAMMING") . |
InspectionOutputOperationBuilder |
InspectionOperationCollection.createInspectionOutputOperationBuilder(CAMObject param)
Creates an Inspection Output Operation Builder
License requirements: insp_programming ("INSPECTION PROGRAMMING") . |
InspectionParplnFeatureBuilder |
InspectionOperationCollection.createInspectionParplnFeatureBuilder(CAMObject param)
Creates an Inspection Parpln Feature Builder
License requirements: insp_programming ("INSPECTION PROGRAMMING") . |
InspectionPathBuilder |
InspectionOperationCollection.createInspectionPathBuilder(CAMObject param)
Creates a CMM Inspection Path Operation builder
License requirements: insp_programming ("INSPECTION PROGRAMMING") . |
InspectionPatternFeatureBuilder |
InspectionOperationCollection.createInspectionPatternFeatureBuilder(CAMObject param)
Creates an Inspection Pattern Feature Builder
License requirements: insp_programming ("INSPECTION PROGRAMMING") . |
InspectionPlaneFeatureBuilder |
InspectionOperationCollection.createInspectionPlaneFeatureBuilder(CAMObject param)
Creates an Inspection Plane Feature Builder
License requirements: insp_programming ("INSPECTION PROGRAMMING") . |
InspectionPointFeatureBuilder |
InspectionOperationCollection.createInspectionPointFeatureBuilder(CAMObject param)
Creates an Inspection Point Feature Builder
License requirements: insp_programming ("INSPECTION PROGRAMMING") . |
InspectionSaveToLayerBuilder |
InspectionOperationCollection.createInspectionSaveToLayerBuilder(CAMObject param)
Creates a CMM Inspection Analyze Save To Layer dialog builder
License requirements: insp_programming ("INSPECTION PROGRAMMING") . |
InspectionSaveToLayerBuilder |
InspectionOperationCollection.createInspectionSaveToLayerBuilderSel(CAMObject[] selOps)
Creates a CMM Inspection Analyze Save To Layer dialog builder with selected operations
License requirements: insp_programming ("INSPECTION PROGRAMMING") . |
InspectionSensorBuilder |
InspectionOperationCollection.createInspectionSensorBuilder(CAMObject param)
Creates a CMM Inspection Sensor Operation builder
License requirements: insp_programming ("INSPECTION PROGRAMMING") . |
InspectionSphereFeatureBuilder |
InspectionOperationCollection.createInspectionSphereFeatureBuilder(CAMObject param)
Creates an Inspection Sphere Feature Builder
License requirements: insp_programming ("INSPECTION PROGRAMMING") . |
InspectionSurfaceFeatureBuilder |
InspectionOperationCollection.createInspectionSurfaceFeatureBuilder(CAMObject param)
Creates an Inspection Surface Feature Builder
License requirements: insp_programming ("INSPECTION PROGRAMMING") . |
InspectionToleranceOperationBuilder |
InspectionOperationCollection.createInspectionToleranceOperationBuilder(CAMObject param)
Creates a cmm tolerance operation builder
License requirements: insp_programming ("INSPECTION PROGRAMMING") . |
InspectionTorusFeatureBuilder |
InspectionOperationCollection.createInspectionTorusFeatureBuilder(CAMObject param)
Creates an Inspection Torus Feature Builder
License requirements: insp_programming ("INSPECTION PROGRAMMING") . |
LaserTeachMode |
OperationCollection.createLaserTeachMode(CAMObject param)
Creates a laser teach mode
License requirements: cam_base ("CAM BASE") . |
LatheMachineControlBuilder |
OperationCollection.createLatheMachineControlBuilder(CAMObject param)
Creates a lathe machine control operation builder
License requirements: cam_base ("CAM BASE") . |
LatheUserDefinedBuilder |
OperationCollection.createLatheUserDefinedBuilder(CAMObject param)
Creates a lathe user defined operation builder
License requirements: cam_base ("CAM BASE") . |
MillMachineControlBuilder |
OperationCollection.createMillMachineControlBuilder(CAMObject param)
Creates a mill machine control operation builder
License requirements: cam_base ("CAM BASE") . |
MillToolProbingBuilder |
OperationCollection.createMillToolProbingBuilder(CAMObject param)
Creates a mill tool probing operation builder
License requirements: cam_base ("CAM BASE") . |
MillUserDefinedBuilder |
OperationCollection.createMillUserDefinedBuilder(CAMObject param)
Creates a mill user defined operation builder
License requirements: cam_base ("CAM BASE") . |
ObjectNotes |
CAMSetup.createObjectNotes(CAMObject opr)
Create Notes.
|
ObjectsUdeSet |
InspectionSetup.createObjectsUdeSet(CAMObject[] params,
CAMSetup.Ude udeType)
Create ObjectsUdeSet.
|
ObjectsUdeSet |
CAMSetup.createObjectsUdeSet(CAMObject[] params,
CAMSetup.Ude udeType)
Create ObjectsUdeSet.
|
ObjectsUdeSet |
CAMSetup.createObjectsUdeSet(CAMObject[] params,
CAMSetup.Ude udeType,
CAMFeature[] features)
Create ObjectsUdeSet for features
License requirements: cam_base ("CAM BASE") . |
OperationTeaching |
CAMSetup.createOperationTeaching(CAMObject param)
Creates a CAM.OperationTeaching
License requirements: cam_base ("CAM BASE") Created in NX8.0.0 |
OperationTransformBuilder |
CAMSetup.createOperationTransformBuilder(CAMObject[] objectsToTransform)
Create Transform builder.
|
PlanarMillingBuilder |
OperationCollection.createPlanarMillingBuilder(CAMObject param)
Creates a planar milling planar operation builder
License requirements: cam_base ("CAM BASE") . |
PlungeMillingBuilder |
OperationCollection.createPlungeMillingBuilder(CAMObject param)
Creates a planar milling plunge operation builder
License requirements: cam_base ("CAM BASE") . |
PointToPointBuilder |
OperationCollection.createPointToPointBuilder(CAMObject param)
Creates a point to point operation builder
License requirements: cam_base ("CAM BASE") . |
RoughTurningBuilder |
OperationCollection.createRoughTurningBuilder(CAMObject param)
Creates a rough turning operation builder
License requirements: cam_base ("CAM BASE") . |
SurfaceContourBuilder |
OperationCollection.createSurfaceContourBuilder(CAMObject param)
Creates a surface contour operation builder
License requirements: cam_base ("CAM BASE") . |
TeachmodeTurningBuilder |
OperationCollection.createTeachmodeTurningBuilder(CAMObject param)
Creates a teachmode turning operation builder
License requirements: cam_base ("CAM BASE") . |
ThreadMillingBuilder |
OperationCollection.createThreadMillingBuilder(CAMObject param)
Creates a Thread Milling operation builder
License requirements: cam_base ("CAM BASE") . |
ThreadTurningBuilder |
OperationCollection.createThreadTurningBuilder(CAMObject param)
Creates a thread turning operation builder
License requirements: cam_base ("CAM BASE") . |
ToolPathDivideBuilder |
CAMSetup.createToolPathDivideBuilder(CAMObject[] tpObjectsToDivide)
Create Tool Path Divide builder
License requirements: cam_base ("CAM BASE") . |
ToolPathSplitBuilder |
CAMSetup.createToolPathSplitBuilder(CAMObject[] tpObjectsToDivide)
Create Tool Path Split by Holder builder
License requirements: cam_base ("CAM BASE") . |
ToolPathTiltBuilder |
CAMSetup.createToolPathTiltBuilder(CAMObject[] tpObjectsToTilt)
Create Tool Path Tilt builder
License requirements: cam_base ("CAM BASE") . |
TurnPartProbingBuilder |
OperationCollection.createTurnPartProbingBuilder(CAMObject param)
Creates a turn part probing operation builder
License requirements: cam_base ("CAM BASE") . |
TurnToolProbingBuilder |
OperationCollection.createTurnToolProbingBuilder(CAMObject param)
Creates a turn tool probing operation builder
License requirements: cam_base ("CAM BASE") . |
VazlMillingBuilder |
OperationCollection.createVazlMillingBuilder(CAMObject param)
Creates a planar milling vazl operation builder
License requirements: cam_base ("CAM BASE") . |
VolumeBased25DMillingOperationBuilder |
OperationCollection.createVolumeBased25dMillingOperationBuilder(CAMObject param)
Creates a volume based 25D milling operation builder
License requirements: cam_base ("CAM BASE") . |
WedmMachineControlBuilder |
OperationCollection.createWedmMachineControlBuilder(CAMObject param)
Creates a wire edm machine control operation builder
License requirements: cam_base ("CAM BASE") . |
WedmOperationBuilder |
OperationCollection.createWedmOperationBuilder(CAMObject param)
Creates a WEDM operation builder
License requirements: cam_base ("CAM BASE") . |
WedmUserDefinedBuilder |
OperationCollection.createWedmUserDefinedBuilder(CAMObject param)
Creates a wire edm user defined operation builder
License requirements: cam_base ("CAM BASE") . |
ZLevelMillingBuilder |
OperationCollection.createZlevelMillingBuilder(CAMObject param)
Creates a planar milling z level operation builder
License requirements: cam_base ("CAM BASE") . |
void |
CAMSetup.customizationUpdateFromObject(CAMObject destinationObject,
CAMObject sourceObject)
Customize from Object
License requirements: cam_base ("CAM BASE") . |
void |
CAMSetup.customizationUpdateFromTemplate(CAMObject[] objects)
Customize from Template
License requirements: cam_base ("CAM BASE") . |
void |
InspectionSetup.cutObjects(CAMSetup.View view,
CAMObject[] objectsToBeMoved)
Cut objects
License requirements: insp_programming ("INSPECTION PROGRAMMING") . |
void |
CAMSetup.cutObjects(CAMSetup.View view,
CAMObject[] objectsToBeMoved)
Cut objects
License requirements: cam_base ("CAM BASE") . |
void |
CAMSetup.delete3dWorkpieces(CAMObject[] objects)
Delete 3D workpieces of the selected operations
License requirements: cam_base ("CAM BASE") . |
void |
CAMSetup.deleteToolPath(CAMObject[] objects)
Delete tool path
License requirements: cam_base ("CAM BASE") . |
void |
CAMSetup.divideToolPaths(CAMObject[] objects,
ToolPathDivideBuilder builder)
Tool Path Divide
License requirements: cam_base ("CAM BASE") . |
void |
InspectionSetup.generateToolPath(CAMObject[] objects)
Generate tool path
License requirements: insp_programming ("INSPECTION PROGRAMMING") . |
void |
CAMSetup.generateToolPath(CAMObject[] objects)
Generate tool path
License requirements: cam_base ("CAM BASE") . |
void |
CAMSetup.gougeCheck(CAMObject[] objects,
boolean checkForHolderCollision)
Deprecated.
Deprecated in NX9.0.0. Use new version with additional arguments instead.
|
void |
CAMSetup.gougeCheck(CAMObject[] objects,
boolean checkForHolderCollision,
boolean useParametric,
boolean useUserdefStock,
double userdefStock)
Gouge Check
License requirements: cam_base ("CAM BASE") . |
boolean |
CAMSetup.hasSuppressedGeom(CAMObject param)
Check for suppressed geometry
License requirements: cam_base ("CAM BASE") . |
boolean |
CAMSetup.isGroup(CAMObject camObject)
Check if the specified object is a group.
|
boolean |
CAMSetup.isOperation(CAMObject camobject)
Check if the specified object is an operation.
|
boolean |
CAMSetup.isToolPathLocked(CAMObject object)
Lock Tool Path
License requirements: cam_base ("CAM BASE") . |
boolean |
BlankIpw.isValidSource(CAMObject object)
Decide if the input object can be a valid source
License requirements: cam_base ("CAM BASE") . |
void |
CAMSetup.listToolPath(CAMObject[] objects)
List tool path
License requirements: cam_base ("CAM BASE") . |
void |
InspectionSetup.lockToolPaths(CAMObject[] objects,
boolean lock)
Lock Tool Path
License requirements: insp_programming ("INSPECTION PROGRAMMING") . |
void |
CAMSetup.lockToolPaths(CAMObject[] objects,
boolean lock)
Lock Tool Path
License requirements: cam_base ("CAM BASE") . |
void |
CAMSetup.minToolLen(CAMObject[] objects)
Minimum tool length
License requirements: cam_base ("CAM BASE") . |
void |
InspectionSetup.moveObjects(CAMSetup.View view,
CAMObject[] objectsToBeMoved,
CAMObject destinationObject,
CAMSetup.Paste pastePosition)
Move objects
License requirements: insp_programming ("INSPECTION PROGRAMMING") . |
void |
InspectionSetup.moveObjects(CAMSetup.View view,
CAMObject[] objectsToBeMoved,
CAMObject destinationObject,
CAMSetup.Paste pastePosition)
Move objects
License requirements: insp_programming ("INSPECTION PROGRAMMING") . |
void |
CAMSetup.moveObjects(CAMSetup.View view,
CAMObject[] objectsToBeMoved,
CAMObject destinationObject,
CAMSetup.Paste pastePosition)
Move objects
License requirements: cam_base ("CAM BASE") . |
void |
CAMSetup.moveObjects(CAMSetup.View view,
CAMObject[] objectsToBeMoved,
CAMObject destinationObject,
CAMSetup.Paste pastePosition)
Move objects
License requirements: cam_base ("CAM BASE") . |
void |
CAMSetup.optimize(CAMObject[] objects,
boolean consolidateTools,
boolean minimizeToolChanges,
boolean createOptimizationGroup)
Optimize
License requirements: cam_base ("CAM BASE") . |
void |
CAMSetup.outputClsf(CAMObject[] objects,
String clsfFormat,
String outfileName,
CAMSetup.OutputUnits outputUnits)
Output CLSF
License requirements: cam_base ("CAM BASE") . |
void |
CAMSetup.parallelCreate3d(CAMObject[] objects)
Parallel create 3D
License requirements: cam_base ("CAM BASE") . |
void |
CAMSetup.parallelGenerate(CAMObject[] objects)
Parallel Generate tool path
License requirements: cam_base ("CAM BASE") . |
void |
InspectionSetup.pasteObjects(CAMSetup.View view,
CAMObject[] objectsToBeMoved,
CAMObject destinationObject,
CAMSetup.Paste pastePosition)
Paste objects after cut
License requirements: insp_programming ("INSPECTION PROGRAMMING") . |
void |
InspectionSetup.pasteObjects(CAMSetup.View view,
CAMObject[] objectsToBeMoved,
CAMObject destinationObject,
CAMSetup.Paste pastePosition)
Paste objects after cut
License requirements: insp_programming ("INSPECTION PROGRAMMING") . |
void |
InspectionSetup.postprocess(CAMObject[] objects,
String machineType,
String outfileName,
CAMSetup.OutputUnits outputUnits)
Postprocess
License requirements: insp_programming ("INSPECTION PROGRAMMING") . |
void |
CAMSetup.postprocess(CAMObject[] objects,
String machineType,
String outfileName,
CAMSetup.OutputUnits outputUnits)
Postprocess
License requirements: cam_base ("CAM BASE") . |
void |
InspectionSetup.postprocessWithSetting(CAMObject[] objects,
String machineType,
String outfileName,
CAMSetup.OutputUnits outputUnits,
CAMSetup.PostprocessSettingsOutputWarning outputWarning,
CAMSetup.PostprocessSettingsReviewTool reviewTool)
Postprocess
License requirements: insp_programming ("INSPECTION PROGRAMMING") . |
void |
CAMSetup.postprocessWithSetting(CAMObject[] objects,
String machineType,
String outfileName,
CAMSetup.OutputUnits outputUnits,
CAMSetup.PostprocessSettingsOutputWarning outputWarning,
CAMSetup.PostprocessSettingsReviewTool reviewTool)
Postprocess
License requirements: cam_base ("CAM BASE") . |
void |
CAMSetup.removeDependencies(CAMObject[] objects)
Remove dependencies of selected objects
License requirements: cam_base ("CAM BASE") . |
void |
CAMSetup.removeSuppressedGeom(CAMObject param)
Remove suppressed geometry
License requirements: cam_base ("CAM BASE") . |
void |
CAMSetup.replayToolPath(CAMObject[] objects)
Replay tool path
License requirements: cam_base ("CAM BASE") . |
void |
InspectionSetup.resequencePaths(CAMObject[] paths)
Resequence selected paths using nearest neighbor order
License requirements: None. |
void |
InspectionSetup.resequenceTols(CAMObject[] tols)
Resequence tolerances
License requirements: None. |
void |
CAMSetup.restoreDependencies(CAMObject[] objects)
Restore dependencies of selected objects
License requirements: cam_base ("CAM BASE") . |
String[] |
InspectionSetup.retrievePathMessages(CAMObject[] objects)
Retrieve toolpath validation messages
License requirements: None. |
InspectionSetup.RetrieveToolData |
InspectionSetup.retrieveTool(String libRef,
CAMObject target)
Retrieve a tool from library to the target
License requirements: None. |
CAMSetup.RetrieveToolData |
CAMSetup.retrieveTool(String libRef,
CAMObject target)
Retrieve a tool from library to the target
License requirements: None. |
CAMObject.ErrorItem[] |
CAMSetup.setMachiningData(CAMObject[] objects)
Set Machining Data
License requirements: cam_base ("CAM BASE") . |
void |
MoveBuilder.setParent(CAMObject parent)
Set parent
License requirements: None. |
void |
InspectionMoveBuilder.setParent(CAMObject parent)
Set parent
License requirements: None. |
void |
InspectionOperationCollection.setPathFeature(CAMObject inspectionPath,
String featureName)
Sets the Inspection Feature referenced in an Inspection Path.
|
void |
InspectionSaveToLayerBuilder.setSelectedOps(CAMObject[] selectedOps)
Sets the selected operations.
|
void |
InspectionDeleteMeaPtsBuilder.setSelectedOps(CAMObject[] selectedOps)
Sets the selected operations.
|
void |
MoveBuilder.setSibling(CAMObject sibling)
Set sibling
License requirements: None. |
void |
InspectionMoveBuilder.setSibling(CAMObject sibling)
Set sibling
License requirements: None. |
void |
InspectionSetup.setTemplateStatus(CAMObject[] objects,
boolean useAsParent,
boolean createIfParentCreated)
Set Template status
License requirements: insp_programming ("INSPECTION PROGRAMMING") . |
void |
CAMSetup.setTemplateStatus(CAMObject[] objects,
boolean useAsParent,
boolean createIfParentCreated)
Set Template status
License requirements: cam_base ("CAM BASE") . |
void |
CAMSetup.show2dWorkpiece(CAMObject[] objects)
Show 2D workpiece
License requirements: cam_base ("CAM BASE") . |
void |
CAMSetup.show2dWorkpieceIn(CAMObject[] objects)
Show ingoing 2D workpiece
License requirements: cam_base ("CAM BASE") . |
void |
CAMSetup.show2dWorkpieceOut(CAMObject[] objects)
Show outgoing 2D workpiece
License requirements: cam_base ("CAM BASE") . |
void |
CAMSetup.show3dWorkpiece(CAMObject[] objects)
Show 3D workpiece
License requirements: cam_base ("CAM BASE") . |
void |
CAMSetup.showSpinning3dWorkpiece(CAMObject[] objects)
Show spinning 3D workpiece
License requirements: cam_base ("CAM BASE") . |
void |
CAMSetup.splitToolPaths(CAMObject[] objects,
ToolPathSplitBuilder builder)
Tool Path Split by Holder
License requirements: cam_base ("CAM BASE") . |
void |
CAMSetup.switchLayerLayout(CAMObject object)
Switch Layer and Layout
License requirements: cam_base ("CAM BASE") . |
void |
CAMSetup.tiltToolPaths(CAMObject[] objects,
ToolPathTiltBuilder builder)
Tool Path Tilt
License requirements: cam_base ("CAM BASE") . |
void |
CAMSetup.unapproveObjects(CAMObject[] objects)
Unapprove objects
License requirements: cam_base ("CAM BASE") . |
void |
CAMSetup.updateGeometryDependencies(CAMObject[] objects)
Update geometry dependencies of selected objects
License requirements: cam_base ("CAM BASE") . |
Constructor and Description |
---|
ErrorItem(CAMObject objectTagInitial,
int errorCodeInitial)
Constructor for the ErrorItem object.
|
Modifier and Type | Method and Description |
---|---|
IsvControlPanelBuilder |
KinematicConfigurator.createIsvControlPanelBuilder(IsvControlPanelBuilder.VisualizationType driverType,
CAMObject[] objects)
Creates an isv control panel builder
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder") . |
Copyright 2011 Siemens Product Lifecycle Management Software Inc. All Rights Reserved.